check if loads that happen in between stores alias with the first store in the
chain, only with the second store onwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169516 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of unconditionally storing origin with every application store,
only do this when the shadow of the stored value is != 0.
This change also delays instrumentation of stores until after the walk over
function's instructions, because adding new basic blocks confuses InstVisitor.
We only keep 1 origin value per 4 bytes of application memory. This change
fixes the bug when a store of a single clean byte wiped the origin for the
whole 4-byte area.
Since stores of uninitialized values are relatively uncommon, this change
improves performance of track-origins mode by 5% median and by up to 47% on
specs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169490 91177308-0d34-0410-b5e6-96231b3b80d8
Some languages, e.g. Ada and Pascal, allow you to specify that the array bounds
are different from the default (1 in these cases). If we have a lower bound
that's non-default, then we emit the lower bound. We also calculate the correct
upper bound in those cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169484 91177308-0d34-0410-b5e6-96231b3b80d8
RUN: a
RUN: b || true
as "a && (b || true)" in Tcl mode, and as "(a && b) || true" in sh mode.
Everyone seems to (quite reasonably) write tests assuming the Tcl behavior,
so use that in sh mode too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169441 91177308-0d34-0410-b5e6-96231b3b80d8
This is much simpler to reason about, more efficient, and
fixes some corner cases involving implicit super-register defs.
Fixed rdar://12797931.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169425 91177308-0d34-0410-b5e6-96231b3b80d8
The new command line option -unwind-info dumps the Win64 EH unwind
data to the console. This is a nice feature if you need to debug
generated EH data (e.g. from LLVM). Includes a test case.
Initial patch by João Matos, extensions and rework by Kai Nacke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169415 91177308-0d34-0410-b5e6-96231b3b80d8
This is for the lldb team so most of but not all of the values are
to be printed as hex with this option. Some small values like the
scale in an X86 address were requested to printed in decimal
without the leading 0x.
There may be some tweaks need to places that may still be in
decimal that they want in hex. Specially for arm. I made my best
guess. Any tweaks from here should be simple.
I also did the best I know now with help from the C++ gurus
creating the cleanest formatImm() utility function and containing
the changes. But if someone has a better idea to make something
cleaner I'm all ears and game for changing the implementation.
rdar://8109283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169393 91177308-0d34-0410-b5e6-96231b3b80d8
reduction variable is not used outside the loop then we ran into an
endless loop. This change checks if we found the original PHI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169324 91177308-0d34-0410-b5e6-96231b3b80d8
This change attempts to simplify (X^Y) -> X or Y in the user's context if we know that
only bits from X or Y are demanded.
A minimized case is provided bellow. This change will simplify "t>>16" into "var1 >>16".
=============================================================
unsigned foo (unsigned val1, unsigned val2) {
unsigned t = val1 ^ 1234;
return (t >> 16) | t; // NOTE: t is used more than once.
}
=============================================================
Note that if the "t" were used only once, the expression would be finally optimized as well.
However, with with this change, the optimization will take place earlier.
Reviewed by Nadav, Thanks a lot!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169317 91177308-0d34-0410-b5e6-96231b3b80d8
The count attribute is more accurate with regards to the size of an array. It
also obviates the upper bound attribute in the subrange. We can also better
handle an unbound array by setting the count to -1 instead of the lower bound to
1 and upper bound to 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169312 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies the fix for PR13303 now with more justification. Based on my
execution of the GDB 7.5 test suite this results in:
expected passes: 16101 -> 20890 (+30%)
unexpected failures: 4826 -> 637 (-77%)
There are 23 checks that used to pass and now fail. They are all in
gdb.reverse. Investigating a few looks like they were accidentally passing
due to extra breakpoints being set by this bug. They're generally due to the
difference in end location between gcc and clang, the test suite is trying to
set breakpoints on the closing '}' that clang doesn't associate with any
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169304 91177308-0d34-0410-b5e6-96231b3b80d8
on 64-bit PowerPC ELF.
The patch includes code to handle external assembly and MC output with the
integrated assembler. It intentionally does not support the "old" JIT.
For the initial-exec TLS model, the ABI requires the following to calculate
the address of external thread-local variable x:
Code sequence Relocation Symbol
ld 9,x@got@tprel(2) R_PPC64_GOT_TPREL16_DS x
add 9,9,x@tls R_PPC64_TLS x
The register 9 is arbitrary here. The linker will replace x@got@tprel
with the offset relative to the thread pointer to the generated GOT
entry for symbol x. It will replace x@tls with the thread-pointer
register (13).
The two test cases verify correct assembly output and relocation output
as just described.
PowerPC-specific selection node variants are added for the two
instructions above: LD_GOT_TPREL and ADD_TLS. These are inserted
when an initial-exec global variable is encountered by
PPCTargetLowering::LowerGlobalTLSAddress(), and later lowered to
machine instructions LDgotTPREL and ADD8TLS. LDgotTPREL is a pseudo
that uses the same LDrs support added for medium code model's LDtocL,
with a different relocation type.
The rest of the processing is straightforward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169281 91177308-0d34-0410-b5e6-96231b3b80d8
The count field is necessary because there isn't a difference between the 'lo'
and 'hi' attributes for a one-element array and a zero-element array. When the
count is '0', we know that this is a zero-element array. When it's >=1, then
it's a normal constant sized array. When it's -1, then the array is unbounded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169218 91177308-0d34-0410-b5e6-96231b3b80d8
Added the code that actually performs the if-conversion during vectorization.
We can now vectorize this code:
for (int i=0; i<n; ++i) {
unsigned k = 0;
if (a[i] > b[i]) <------ IF inside the loop.
k = k * 5 + 3;
a[i] = k; <---- K is a phi node that becomes vector-select.
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169217 91177308-0d34-0410-b5e6-96231b3b80d8
The type of shirt-right (logical or arithemetic) should remain unchanged
when transforming "X << C1 >> C2" into "X << (C1-C2)"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169209 91177308-0d34-0410-b5e6-96231b3b80d8
the alignment is clamped to TargetFrameLowering.getStackAlignment if the target
does not support stack realignment or the option "realign-stack" is off.
This will cause miscompile if the address is treated as aligned and add is
replaced with or in DAGCombine.
Added a bool StackRealignable to TargetFrameLowering to check whether stack
realignment is implemented for the target. Also added a bool RealignOption
to MachineFrameInfo to check whether the option "realign-stack" is on.
rdar://12713765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169197 91177308-0d34-0410-b5e6-96231b3b80d8
is not yet good enough for more sophistication. The important goal of this
test is to make sure llc doesn't crash on this IR like it used to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169146 91177308-0d34-0410-b5e6-96231b3b80d8
; CHECK: [[VAR:[a-z]]]
The problem was that to find the end of the regex var definition, it was
simplistically looking for the next ]] and finding the incorrect one. A
better approach is to count nesting of brackets (taking escaping into
account). This way the brackets that are part of the regex can be discovered
and skipped properly, and the ]] ending is detected in the right place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169109 91177308-0d34-0410-b5e6-96231b3b80d8
Also check in a case to repeat the issue, on which 'opt -globalopt' consumes 1.6GB memory.
The big memory footprint cause is that current GlobalOpt one by one hoists and stores the leaf element constant into the global array, in each iteration, it recreates the global array initializer constant and leave the old initializer alone. This may result in many obsolete constants left.
For example: we have global array @rom = global [16 x i32] zeroinitializer
After the first element value is hoisted and installed: @rom = global [16 x i32] [ 1, 0, 0, ... ]
After the second element value is installed: @rom = global [16 x 32] [ 1, 2, 0, 0, ... ] // here the previous initializer is obsolete
...
When the transform is done, we have 15 obsolete initializers left useless.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169079 91177308-0d34-0410-b5e6-96231b3b80d8
The TwoAddressInstructionPass takes the machine code out of SSA form by
expanding REG_SEQUENCE instructions into copies. It is no longer
necessary to rewrite the registers used by a REG_SEQUENCE instruction
because the new coalescer algorithm can do it now.
REG_SEQUENCE is just converted to a sequence of sub-register copies now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169067 91177308-0d34-0410-b5e6-96231b3b80d8
part of the compile unit CU and start separating out information into
the various sections that will be pulled out later.
WIP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169061 91177308-0d34-0410-b5e6-96231b3b80d8
Codegen was failing with an assertion because of unexpected vector
operands when legalizing the selection DAG for a MUL instruction.
The asserting code was legalizing multiplies for vectors of size 128
bits. It uses a custom lowering to try and detect cases where it can
use a VMULL instruction instead of a VMOVL + VMUL. The code was
looking for input operands to the MUL that had been sign or zero
extended. If it found the extended operands it would drop the
sign/zero extension and use the original vector size as input to a
VMULL instruction.
The code assumed that the original input vector was 64 bits so that
after dropping the extension it would fit directly into a D register
and could be used as an operand of a VMULL instruction. The input
code that trigger the failure used a vector of <4 x i8> that was
sign extended to <4 x i32>. It was not safe to drop the sign
extension in this case because the original vector is only 32 bits
wide. The fix is to insert a sign extension for the vector to reach
the required 64 bit size. In this particular example, the vector would
need to be sign extented to a <4 x i16>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169024 91177308-0d34-0410-b5e6-96231b3b80d8
instruction (vmaddfp) to conform with IEEE to ensure the sign of a zero
result when resulting product is -0.0.
The -0.0 vector addend to vmaddfp is generated by a creating a vector
with full bits sets and then shifting each elements by 31-bits to the
left, resulting in a vector of 0x80000000 (or -0.0 as float).
The 'buildvec_canonicalize.ll' was adjusted to reflect this change and
the 'vec_mul.ll' was complemented with the float vector multiplication
test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168998 91177308-0d34-0410-b5e6-96231b3b80d8
the tables cannot fit in registers (i.e. bitmap), do not emit the table
if it's using an illegal type.
rdar://12779436
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168970 91177308-0d34-0410-b5e6-96231b3b80d8
more information for dependences between
instructions that don't share a common loop.
Updated the test results appropriately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168965 91177308-0d34-0410-b5e6-96231b3b80d8
This revision attempts to recognize following population-count pattern:
while(a) { c++; ... ; a &= a - 1; ... },
where <c> and <a>could be used multiple times in the loop body.
TODO: On X8664 and ARM, __buildin_ctpop() are not expanded to a efficent
instruction sequence, which need to be improved in the following commits.
Reviewed by Nadav, really appreciate!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168931 91177308-0d34-0410-b5e6-96231b3b80d8
the last invoke instruction in the function. This also removes the last landing
pad in an function. This is fine, but with SjLj EH code, we've already placed a
bunch of code in the 'entry' block, which expects the landing pad to stick
around.
When we get to the situation where CGP has removed the last landing pad, go
ahead and nuke the SjLj instructions from the 'entry' block.
<rdar://problem/12721258>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168930 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the puts optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
All the simplifiers from simplify-libcalls have now been migrated to
instcombine. Yay! Just a few other bits to migrate (prototype attribute
inference and a few statistics) and simplify-libcalls can finally be put
to rest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168925 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fputs optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168893 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fwrite optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168892 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fprintf optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168891 91177308-0d34-0410-b5e6-96231b3b80d8
If we need to split the operand of a VSELECT, it must be the mask operand. We
split the entire VSELECT operand with EXTRACT_SUBVECTOR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168883 91177308-0d34-0410-b5e6-96231b3b80d8
For some targets, it is desirable to prefer scalarizing <N x i1> instead of promoting to a larger legal type, such as <N x i32>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168882 91177308-0d34-0410-b5e6-96231b3b80d8
This change ensures that shadow memory accesses have the same alignment
as corresponding app memory accesses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168880 91177308-0d34-0410-b5e6-96231b3b80d8
This could cause miscompilations in targets where sub-register
composition is not always idempotent (ARM).
<rdar://problem/12758887>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168837 91177308-0d34-0410-b5e6-96231b3b80d8
The createPPCMCAsmInfo routine used PPC::R1 as the initial frame
pointer register, but on PPC64 the 32-bit R1 register does not
have a corresponding DWARF number, causing invalid CIE initial
frame state to be emitted. Fix by using PPC::X1 instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168799 91177308-0d34-0410-b5e6-96231b3b80d8
Accordingly, update a testcase with a broken datalayout string.
Also, we never parse negative numbers, because '-' is used as a
separator. Therefore, use unsigned as result type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168785 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple, cheap infrastructure for analyzing the shape of a
DAG. It recognizes uniform DAGs that take the shape of bottom-up
subtrees, such as the included matrix multiplication example. This is
useful for heuristics that balance register pressure with ILP. Two
canonical expressions of the heuristic are implemented in scheduling
modes: -misched-ilpmin and -misched-ilpmax.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168773 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a hole in the "cheap" alias analysis logic implemented within
the DAG builder itself, regardless of whether proper alias analysis is
enabled. It now handles this pattern produced by LSR+CodeGenPrepare.
%sunkaddr1 = ptrtoint * %obj to i64
%sunkaddr2 = add i64 %sunkaddr1, %lsr.iv
%sunkaddr3 = inttoptr i64 %sunkaddr2 to i32*
store i32 %v, i32* %sunkaddr3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168768 91177308-0d34-0410-b5e6-96231b3b80d8
When two instructions are combined into a vector instruction,
the resulting instruction must have the most-conservative flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168765 91177308-0d34-0410-b5e6-96231b3b80d8
When the CodeGenInfo is to be created for the PPC64 target machine,
a default code-model selection is converted to CodeModel::Medium
provided we are not targeting the Darwin OS. Defaults for Darwin
are unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168747 91177308-0d34-0410-b5e6-96231b3b80d8
there's no possible loo-independent dependence, then there's no
dependence.
Updated all test result appropriately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168719 91177308-0d34-0410-b5e6-96231b3b80d8
boundaries.
Given the following case:
BB0
%vreg1<def> = SUBrr %vreg0, %vreg7
%vreg2<def> = COPY %vreg7
BB1
%vreg10<def> = SUBrr %vreg0, %vreg2
We should be able to CSE between SUBrr in BB0 and SUBrr in BB1.
rdar://12462006
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168717 91177308-0d34-0410-b5e6-96231b3b80d8
My commit to migrate the printf simplifiers from the simplify-libcalls
in r168604 introduced a regression reported by Duncan [1]. The problem
is that in some cases the library call simplifier can return a new value
that has no uses and the new value's type is different than the old value's
type (which is fine because there are no uses). The specific case that
triggered the bug looked something like:
declare void @printf(i8*, ...)
...
call void (i8*, ...)* @printf(i8* %fmt)
Which we want to optimized into:
call i32 @putchar(i32 104)
However, the code was attempting to replace all uses of the printf with
the putchar and the types differ, hence a crash. This is fixed by *just*
deleting the original instruction when there are no uses. The old
simplify-libcalls pass is already doing something similar.
[1] http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-November/056338.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168716 91177308-0d34-0410-b5e6-96231b3b80d8
when the destination register is wider than the memory load.
These load instructions load from m32 or m64 and set the upper bits to zero,
while the folded instructions may accept m128.
rdar://12721174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168710 91177308-0d34-0410-b5e6-96231b3b80d8
The default for 64-bit PowerPC is small code model, in which TOC entries
must be addressable using a 16-bit offset from the TOC pointer. Additionally,
only TOC entries are addressed via the TOC pointer.
With medium code model, TOC entries and data sections can all be addressed
via the TOC pointer using a 32-bit offset. Cooperation with the linker
allows 16-bit offsets to be used when these are sufficient, reducing the
number of extra instructions that need to be executed. Medium code model
also does not generate explicit TOC entries in ".section toc" for variables
that are wholly internal to the compilation unit.
Consider a load of an external 4-byte integer. With small code model, the
compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
With medium model, it instead generates:
addis 3, 2, .LC1@toc@ha
ld 3, .LC1@toc@l(3)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the
32-bit offset of ei's TOC entry from the TOC base pointer. Similarly,
.LC1@toc@l is a relocation requesting the lower 16 bits. Note that if
the linker determines that ei's TOC entry is within a 16-bit offset of
the TOC base pointer, it will replace the "addis" with a "nop", and
replace the "ld" with the identical "ld" instruction from the small
code model example.
Consider next a load of a function-scope static integer. For small code
model, the compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc test_fn_static.si[TC],test_fn_static.si
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
For medium code model, the compiler generates:
addis 3, 2, test_fn_static.si@toc@ha
addi 3, 3, test_fn_static.si@toc@l
lwz 4, 0(3)
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
Again, the linker may replace the "addis" with a "nop", calculating only
a 16-bit offset when this is sufficient.
Note that it would be more efficient for the compiler to generate:
addis 3, 2, test_fn_static.si@toc@ha
lwz 4, test_fn_static.si@toc@l(3)
The current patch does not perform this optimization yet. This will be
addressed as a peephole optimization in a later patch.
For the moment, the default code model for 64-bit PowerPC will remain the
small code model. We plan to eventually change the default to medium code
model, which matches current upstream GCC behavior. Note that the different
code models are ABI-compatible, so code compiled with different models will
be linked and execute correctly.
I've tested the regression suite and the application/benchmark test suite in
two ways: Once with the patch as submitted here, and once with additional
logic to force medium code model as the default. The tests all compile
cleanly, with one exception. The mandel-2 application test fails due to an
unrelated ABI compatibility with passing complex numbers. It just so happens
that small code model was incredibly lucky, in that temporary values in
floating-point registers held the expected values needed by the external
library routine that was called incorrectly. My current thought is to correct
the ABI problems with _Complex before making medium code model the default,
to avoid introducing this "regression."
Here are a few comments on how the patch works, since the selection code
can be difficult to follow:
The existing logic for small code model defines three pseudo-instructions:
LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for
constant pool addresses. These are expanded by SelectCodeCommon(). The
pseudo-instruction approach doesn't work for medium code model, because
we need to generate two instructions when we match the same pattern.
Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY
node for medium code model, and generates an ADDIStocHA followed by either
a LDtocL or an ADDItocL. These new node types correspond naturally to
the sequences described above.
The addis/ld sequence is generated for the following cases:
* Jump table addresses
* Function addresses
* External global variables
* Tentative definitions of global variables (common linkage)
The addis/addi sequence is generated for the following cases:
* Constant pool entries
* File-scope static global variables
* Function-scope static variables
Expanding to the two-instruction sequences at select time exposes the
instructions to subsequent optimization, particularly scheduling.
The rest of the processing occurs at assembly time, in
PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to
a "real" PowerPC instruction. When a TOC entry needs to be created, this
is done here in the same manner as for the existing LDtoc, LDtocJTI, and
LDtocCPT pseudo-instructions (I factored out a new routine to handle this).
I had originally thought that if a TOC entry was needed for LDtocL or
ADDItocL, it would already have been generated for the previous ADDIStocHA.
However, at higher optimization levels, the ADDIStocHA may appear in a
different block, which may be assembled textually following the block
containing the LDtocL or ADDItocL. So it is necessary to include the
possibility of creating a new TOC entry for those two instructions.
Note that for LDtocL, we generate a new form of LD called LDrs. This
allows specifying the @toc@l relocation for the offset field of the LD
instruction (i.e., the offset is replaced by a SymbolLo relocation).
When the peephole optimization described above is added, we will need
to do similar things for all immediate-form load and store operations.
The seven "mcm-n.ll" test cases are kept separate because otherwise the
intermingling of various TOC entries and so forth makes the tests fragile
and hard to understand.
The above assumes use of an external assembler. For use of the
integrated assembler, new relocations are added and used by
PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for
proper generation of the various relocations for the same sequences
tested with the external assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
argument. Instead, use a pair of .local and .comm directives.
This avoids spurious differences between binaries built by the
integrated assembler vs. those built by the external assembler,
since the external assembler may impose alignment requirements
on .lcomm symbols where the integrated assembler does not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168704 91177308-0d34-0410-b5e6-96231b3b80d8
