GCC does this for non-zero discriminators and since GCC doesn't produce
column info, that was the only place it comes up there. For LLVM, since
we can emit discriminators and/or column info, it makes more sense to
invert the condition and just test for changes in line number.
This should resolve at least some of the GDB 7.5 test suite failures
created by recent Clang changes that increase the location fidelity
(which, since Clang defaults to including column info on Linux by
default created a bunch of cases that confused GDB).
In theory we could do this better/differently by grouping actual source
statements together in a similar manner to the way lexical scopes are
handled but given that GDB isn't really in a position to consume that (&
users are probably somewhat used to different lines being different
'statements') this seems the safest and cheapest change. (I'm concerned
that doing this 'right' would bloat the debugloc data even further -
something Duncan's working hard to address)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225011 91177308-0d34-0410-b5e6-96231b3b80d8
Under the large code model, we cannot assume that __morestack lives within
2^31 bytes of the call site, so we cannot use pc-relative addressing. We
cannot perform the call via a temporary register, as the rax register may
be used to store the static chain, and all other suitable registers may be
either callee-save or used for parameter passing. We cannot use the stack
at this point either because __morestack manipulates the stack directly.
To avoid these issues, perform an indirect call via a read-only memory
location containing the address.
This solution is not perfect, as it assumes that the .rodata section
is laid out within 2^31 bytes of each function body, but this seems to
be sufficient for JIT.
Differential Revision: http://reviews.llvm.org/D6787
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225003 91177308-0d34-0410-b5e6-96231b3b80d8
If a linker directive is already quoted, don't try to quote it again, otherwise it creates a mess.
This pops up in places like:
#pragma comment(linker,"\"/foo bar'\"")
Differential Revision: http://reviews.llvm.org/D6792
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224998 91177308-0d34-0410-b5e6-96231b3b80d8
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224985 91177308-0d34-0410-b5e6-96231b3b80d8
Nothing particularly interesting, just adding infrastructure for use by in tree users and out of tree users.
Note: These were extracted out of a working frontend, but they have not been well tested in isolation.
Differential Revision: http://reviews.llvm.org/D6807
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224981 91177308-0d34-0410-b5e6-96231b3b80d8
It looks like the original intent was to check which symbols were created.
With macho-dump the sections were being checked just to match which symbol
was in which section.
llvm-objdump prints the section a symbol is in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224980 91177308-0d34-0410-b5e6-96231b3b80d8
These are simply a collection of tests intended to show that information about the contents of gc references in the heap is lost at a statepoint. I've tried to write them so that they don't disallow correct transformations, while still being fairly easy to understand.
p.s. Ideas for additional tests are welcome.
Differential Revision: http://reviews.llvm.org/D6491
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224971 91177308-0d34-0410-b5e6-96231b3b80d8
This change implements four basic optimizations:
If a relocated value isn't used, it doesn't need to be relocated.
If the value being relocated is null, relocation doesn't change that. (Technically, this might be collector specific. I don't know of one which it doesn't work for though.)
If the value being relocated is undef, the relocation is meaningless.
If the value being relocated was known nonnull, the relocated pointer also isn't null. (Since it points to the same source language object.)
I outlined other planned work in comments.
Differential Revision: http://reviews.llvm.org/D6600
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224968 91177308-0d34-0410-b5e6-96231b3b80d8
In LICM, we have a check for an instruction which is guaranteed to execute and thus can't introduce any new faults if moved to the preheader. To handle a function which might unconditionally throw when first called, we check for any potentially throwing call in the loop and give up.
This is unfortunate when the potentially throwing condition is down a rare path. It prevents essentially all LICM of potentially faulting instructions where the faulting condition is checked outside the loop. It also greatly diminishes the utility of loop unswitching since control dependent instructions - which are now likely in the loops header block - will not be lifted by subsequent LICM runs.
define void @nothrow_header(i64 %x, i64 %y, i1 %cond) {
; CHECK-LABEL: nothrow_header
; CHECK-LABEL: entry
; CHECK: %div = udiv i64 %x, %y
; CHECK-LABEL: loop
; CHECK: call void @use(i64 %div)
entry:
br label %loop
loop: ; preds = %entry, %for.inc
%div = udiv i64 %x, %y
br i1 %cond, label %loop-if, label %exit
loop-if:
call void @use(i64 %div)
br label %loop
exit:
ret void
}
The current patch really only helps with non-memory instructions (i.e. divs, etc..) since the maythrow call down the rare path will be considered to alias an otherwise hoistable load. The one exception is that it does kick in for loads which are known to be invariant without regard to other possible stores, i.e. those marked with either !invarant.load metadata of tbaa 'is constant memory' metadata.
Differential Revision: http://reviews.llvm.org/D6725
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224965 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This in turn allows us to use #includes with cgo that rely on CMake
provided include directories which is particularly useful for handling
generated headers that aren't reasonable to put in an "installable"
location.
Differential Revision: http://reviews.llvm.org/D6798
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224962 91177308-0d34-0410-b5e6-96231b3b80d8
This patches fixes a miscompile where we were assuming that loading from null is undefined and thus we could assume it doesn't happen. This transform is perfectly legal in address space 0, but is not neccessarily legal in other address spaces.
We really should introduce a hook to control this property on a per target per address space basis. We may be loosing valuable optimizations in some address spaces by being too conservative.
Original patch by Thomas P Raoux (submitted to llvm-commits), tests and formatting fixes by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224961 91177308-0d34-0410-b5e6-96231b3b80d8
a CLANG_LIBDIR_SUFFIX variable. This is necessary before I can add
support for using that variable to CMake and the C++ code in Clang, and
the autoconf build system does all substitutions in the LLVM tree.
As mentioned before, I'm not planning to add actual multilib support to
the autoconf build, just enough stubs for it to keep playing nicely with
the CMake build once that one has support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224922 91177308-0d34-0410-b5e6-96231b3b80d8
For this to work, we have to encode it in the build variables and use it
from llvm-config.cpp. I've tried to do this reasonably cleanly, but the
code for llvm-config.cpp is pretty strange. However, with this,
llvm-config stops giving the wrong answer when using LLVM_LIBDIR_SUFFIX.
Note that the configure+make build just sets this to an empty string as
that build system has zero support for multilib of any form. I'm not
planning to add support there either, but this should leave a path for
anyone that wanted to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224921 91177308-0d34-0410-b5e6-96231b3b80d8
that is used by other projects to build against LLVM. This will allow
subsequent patches to them to use LLVM_LIBDIR_SUFFIX, both when built as
part of the larger LLVM build an as part of a standalone build against
an installed set of LLVM libraries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224920 91177308-0d34-0410-b5e6-96231b3b80d8
