The problem is that the dominator update code didn't "realize" that it's
possible for the newly inserted basic block to dominate anything. Because
it IS possible, stuff was getting updated wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11137 91177308-0d34-0410-b5e6-96231b3b80d8
complete rewrite of load-vn will make it a bit faster. This changes speeds up
the gcse pass (which uses load-vn) from 25.45s to 0.42s on the testcase in
PR209.
I've also verified that this gives the exact same results as the old one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11132 91177308-0d34-0410-b5e6-96231b3b80d8
1. Don't scan to the end of alloca instructions in the caller function to
insert inlined allocas, just insert at the top. This saves a lot of
time inlining into functions with a lot of allocas.
2. Use splice to move the alloca instructions over, instead of remove/insert.
This allows us to transfer a block at a time, and eliminates a bunch of
silly symbol table manipulations.
This speeds up the inliner on the testcase in PR209 from 1.73s -> 1.04s (67%)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11118 91177308-0d34-0410-b5e6-96231b3b80d8
and that basic block ends with a return instruction. In this case, we can just splice
the cloned "body" of the function directly into the source basic block, avoiding a lot
of rearrangement and splitBasicBlock's linear scan over the split block. This speeds up
the inliner on the testcase in PR209 from 2.3s to 1.7s, a 35% reduction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11116 91177308-0d34-0410-b5e6-96231b3b80d8
before we delete the original call site, allowing slight simplifications of
code, but nothing exciting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11109 91177308-0d34-0410-b5e6-96231b3b80d8
process. The only optimization we did so far is to avoid creating a
PHI node, then immediately destroying it in the common case where the
callee has one return statement. Instead, we just don't create the return
value. This has no noticable performance impact, but paves the way for
future improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11108 91177308-0d34-0410-b5e6-96231b3b80d8
to add the cloned block to. This allows the block to be added to the function
immediately, and all of the instructions to be immediately added to the function
symbol table, which speeds up the inliner from 3.7 -> 3.38s on the PR209.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11107 91177308-0d34-0410-b5e6-96231b3b80d8
instead of a loop that is really inefficient with large basic blocks.
This speeds up the inliner pass on the testcase in PR209 from 13.8s to 2.24s
which still isn't exactly speedy, but is a lot better. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11105 91177308-0d34-0410-b5e6-96231b3b80d8
process them all as a group. This speeds up SRoA/mem2reg from 28.46s to
0.62s on the testcase from PR209.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11100 91177308-0d34-0410-b5e6-96231b3b80d8
Basically we store floating point values as their integral components, instead of relying
on the semantics of floating point < to differentiate between values. This is likely to
make the map search be faster anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11064 91177308-0d34-0410-b5e6-96231b3b80d8
registers (not as the max number of registers).
Change toSpill from a std::set into a std::vector<bool>.
Use the reverse iterator adapter to do a reverse scan of allocatable
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11061 91177308-0d34-0410-b5e6-96231b3b80d8
Move Passes.h (which defines the interface to this file) to the top.
Move statistics to the top of the file.
Add a comment
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11034 91177308-0d34-0410-b5e6-96231b3b80d8
of a linear search to find the first range for comparisons. This cuts
down the linear scan register allocator running time by a factor of 3
in 254.perlbmk and by a factor of 2.2 in 176.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11030 91177308-0d34-0410-b5e6-96231b3b80d8
Simplification of LiveIntervals::Interval::overlaps() and addition of
examples to overlaps() and liveAt() to make them clearer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11028 91177308-0d34-0410-b5e6-96231b3b80d8
FP_REG_KILL instructions at the end of blocks involved with critical edges.
Fix a bug where FP_REG_KILL instructions weren't inserted in fall through
unconditional branches. Perhaps this will fix some linscan problems?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11019 91177308-0d34-0410-b5e6-96231b3b80d8
the globals directly. This doesn't save any substantial time, however, because the
globals graph only contains globals!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10997 91177308-0d34-0410-b5e6-96231b3b80d8
function to find the globals, iterate over all of the globals directly. This
speeds the function up from 14s to 6.3s on perlbmk, reducing DSA time from
53->46s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10996 91177308-0d34-0410-b5e6-96231b3b80d8
This reduces the number of nodes allocated, then immediately merged and DNE'd
from 2193852 to 1298049. unfortunately this only speeds DSA up by ~1.5s (of
53s), because it's spending most of its time waddling through the scalar map :(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10992 91177308-0d34-0410-b5e6-96231b3b80d8
Also, use RC::merge when possible, reducing the number of nodes allocated, then immediately merged away from 2985444 to 2193852 on perlbmk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10991 91177308-0d34-0410-b5e6-96231b3b80d8
it to be off. If it looks like it's completely unnecessary after testing, I
will remove it completely (which is the hope).
* Callers of the DSNode "copy ctor" can not choose to not copy links.
* Make node collapsing not create a garbage node in some cases, avoiding a
memory allocation, and a subsequent DNE.
* When merging types, allow two functions of different types to be merged
without collapsing.
* Use DSNodeHandle::isNull more often instead of DSNodeHandle::getNode() == 0,
as it is much more efficient.
*** Implement the new, more efficient reachability cloner class
In addition to only cloning nodes that are reachable from interesting
roots, this also fixes the huge inefficiency we had where we cloned lots
of nodes, only to merge them away immediately after they were cloned.
Now we only actually allocate a node if there isn't one to merge it into.
* Eliminate the now-obsolete cloneReachable* and clonePartiallyInto methods
* Rewrite updateFromGlobalsGraph to use the reachability cloner
* Rewrite mergeInGraph to use the reachability cloner
* Disable the scalar map scanning code in removeTriviallyDeadNodes. In large
SCC's, this is extremely expensive. We need a better data structure for the
scalar map, because we really want to scan the unique node handles, not ALL
of the scalars.
* Remove the incorrect SANER_CODE_FOR_CHECKING_IF_ALL_REFERRERS_ARE_FROM_SCALARMAP code.
* Move the code for eliminating integer nodes from the trivially dead
eliminator to the dead node eliminator.
* removeDeadNodes no longer uses removeTriviallyDeadNodes, as it contains a
superset of the node removal power.
* Only futz around with the globals graph in removeDeadNodes if it is modified
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10987 91177308-0d34-0410-b5e6-96231b3b80d8
efficient in the case where a function calls into the same graph multiple times
(ie, it either contains multiple calls to the same function, or multiple calls
to functions in the same SCC graph)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10986 91177308-0d34-0410-b5e6-96231b3b80d8
