we stopped efficiently lowering sextload using the SSE41 instructions
for that operation.
This is a consequence of a bad predicate I used thinking of the memory
access needs. The code actually handles the cases where the predicate
doesn't apply, and handles them much better. =] Simple fix and a test
case added. Fixes PR20767.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216538 91177308-0d34-0410-b5e6-96231b3b80d8
This combine is essentially combining target-specific nodes back into target
independent nodes that it "knows" will be combined yet again by a target
independent DAG combine into a different set of target-independent nodes that
are legal (not custom though!) and thus "ok". This seems... deeply flawed. The
crux of the problem is that we don't combine un-legalized shuffles that are
introduced by legalizing other operations, and thus we don't see a very
profitable combine opportunity. So the backend just forces the input to that
combine to re-appear.
However, for this to work, the conditions detected to re-form the unlegalized
nodes must be *exactly* right. Previously, failing this would have caused poor
code (if you're lucky) or a crasher when we failed to select instructions.
After r215611 we would fall back into the legalizer. In some cases, this just
"fixed" the crasher by produces bad code. But in the test case added it caused
the legalizer and the dag combiner to iterate forever.
The fix is to make the alignment checking in the x86 side of things match the
alignment checking in the generic DAG combine exactly. This isn't really a
satisfying or principled fix, but it at least make the code work as intended.
It also highlights that it would be nice to detect the availability of under
aligned loads for a given type rather than bailing on this optimization. I've
left a FIXME to document this.
Original commit message for r215611 which covers the rest of the chang:
[SDAG] Fix a case where we would iteratively legalize a node during
combining by replacing it with something else but not re-process the
node afterward to remove it.
In a truly remarkable stroke of bad luck, this would (in the test case
attached) end up getting some other node combined into it without ever
getting re-processed. By adding it back on to the worklist, in addition
to deleting the dead nodes more quickly we also ensure that if it
*stops* being dead for any reason it makes it back through the
legalizer. Without this, the test case will end up failing during
instruction selection due to an and node with a type we don't have an
instruction pattern for.
It took many million runs of the shuffle fuzz tester to find this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216537 91177308-0d34-0410-b5e6-96231b3b80d8
We supported transforming:
(gep i8* X, -(ptrtoint Y))
to:
(inttoptr (sub (ptrtoint X), (ptrtoint Y)))
However, this only fired if 'X' had type i8*. Generalize this to
support various types of different sizes. This results in much better
CodeGen, especially for pointers to packed structs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216523 91177308-0d34-0410-b5e6-96231b3b80d8
When a shift with extension or an add with shift and extension cannot be folded
into the memory operation, then the address calculation has to be materialized
separately. While doing so the code forgot to consider a possible sign-/zero-
extension. This fix folds now also the sign-/zero-extension into the add or
shift instruction which is used to materialize the address.
This fixes rdar://problem/18141718.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216511 91177308-0d34-0410-b5e6-96231b3b80d8
The existing matcher has lots of AT&T assembly dialect assumptions baked
into it. In particular, the hack for resolving the size of a memory
operand by appending the four most common suffixes doesn't work at all.
The Intel assembly dialect mnemonic table has ambiguous entries, so we
need to try matching multiple times with different operand sizes, since
that's the only way to choose different instruction variants.
This makes us more compatible with gas's implementation of Intel
assembly syntax. MSVC assumes you want byte-sized operations for the
instructions that we reject as ambiguous.
Reviewed By: grosbach
Differential Revision: http://reviews.llvm.org/D4747
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216481 91177308-0d34-0410-b5e6-96231b3b80d8
consider:
long long *f(long long *b, long long *e) {
return b + (e - b);
}
we would lower this to something like:
define i64* @f(i64* %b, i64* %e) {
%1 = ptrtoint i64* %e to i64
%2 = ptrtoint i64* %b to i64
%3 = sub i64 %1, %2
%4 = ashr exact i64 %3, 3
%5 = getelementptr inbounds i64* %b, i64 %4
ret i64* %5
}
This should fold away to just 'e'.
N.B. This adds m_SpecificInt as a convenient way to match against a
particular 64-bit integer when using LLVM's match interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216439 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is no functionality change here except in the way we assemble and
dump musttail calls in variadic functions. There's really no need to
separate out the bits for musttail and "is forwarding varargs" on call
instructions. A musttail call by definition has to forward the ellipsis
or it would fail verification.
Reviewers: chandlerc, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4892
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216423 91177308-0d34-0410-b5e6-96231b3b80d8
Adding, removing, or changing non-pack parameters can change the ABI
classification of pack parameters. Clang and other frontends encode the
classification in the IR of the call site, but the callee side
determines it dynamically based on the number of registers consumed so
far. Changing the prototype affects the number of registers consumed
would break such code.
Dead argument elimination performs a similar task and already has a
similar check to avoid this problem.
Patch by Thomas Jablin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216421 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalDCE deletes global vars and updates their initializers to nullptr
while leaving underlying constants to be cleaned up later by its uses.
The clean up may never happen, fix this by forcing it every time it's
safe to destroy constants.
Final patch by Rafael Espindola
http://reviews.llvm.org/D4931
<rdar://problem/17523868>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216390 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support to recognize division by uniform power of 2 and modifies the cost table to vectorize division by uniform power of 2 whenever possible.
Updates Cost model for Loop and SLP Vectorizer.The cost table is currently only updated for X86 backend.
Thanks to Hal, Andrea, Sanjay for the review. (http://reviews.llvm.org/D4971)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216371 91177308-0d34-0410-b5e6-96231b3b80d8
CFE, with -03, would turn:
bool f(unsigned x) {
bool a = x & 1;
bool b = x & 2;
return a | b;
}
into:
%1 = lshr i32 %x, 1
%2 = or i32 %1, %x
%3 = and i32 %2, 1
%4 = icmp ne i32 %3, 0
This sort of thing exposes a nasty pathology in GCC, ICC and LLVM.
Instead, we would rather want:
%1 = and i32 %x, 3
%2 = icmp ne i32 %1, 0
Things get a bit more interesting in the following case:
%1 = lshr i32 %x, %y
%2 = or i32 %1, %x
%3 = and i32 %2, 1
%4 = icmp ne i32 %3, 0
Replacing it with the following sequence is better:
%1 = shl nuw i32 1, %y
%2 = or i32 %1, 1
%3 = and i32 %2, %x
%4 = icmp ne i32 %3, 0
This sequence is preferable because %1 doesn't involve %x and could
potentially be hoisted out of loops if it is invariant; only perform
this transform in the non-constant case if we know we won't increase
register pressure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216343 91177308-0d34-0410-b5e6-96231b3b80d8
Adds code generation support for dcbtst (data cache prefetch for write) and
icbt (instruction cache prefetch for read - Book E cores only).
We still end up with a 'cannot select' error for the non-supported prefetch
intrinsic forms. This will be fixed in a later commit.
Fixes PR20692.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216339 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r215862 due to nightly failures. Will work on getting a
reduced test case, but I wanted to get our bots green in the meantime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216325 91177308-0d34-0410-b5e6-96231b3b80d8
these DAG combines.
The DAG auto-CSE thing is truly terrible. Due to it, when RAUW-ing
a node with its operand, you can cause its uses to CSE to itself, which
then causes their uses to become your uses which causes them to be
picked up by the RAUW. For nodes that are determined to be "no-ops",
this is "fine". But if the RAUW is one of several steps to enact
a transformation, this causes the DAG to really silently eat an discard
nodes that you would never expect. It took days for me to actually
pinpoint a test case triggering this and a really frustrating amount of
time to even comprehend the bug because I never even thought about the
ability of RAUW to iteratively consume nodes due to CSE-ing them into
itself.
To fix this, we have to build up a brand-new chain of operations any
time we are combining across (potentially) intervening nodes. But once
the logic is added to do this, another issue surfaces: CombineTo eagerly
deletes the one node combined, *but no others*. This is... really
frustrating. If deleting it makes its operands become dead, those
operand nodes often won't go onto the worklist in the
order you would want -- they're already on it and not near the top. That
means things higher on the worklist will get combined prior to these
dead nodes being GCed out of the worklist, and if the chain is long, the
immediate users won't be enough to re-detect where the root of the chain
is that became single-use again after deleting the dead nodes. The
better way to do this is to never immediately delete nodes, and instead
to just enqueue them so we can recursively delete them. The
combined-from node is typically not on the worklist anyways by virtue of
having been popped off.... But that in turn breaks other tests that
*require* CombineTo to delete unused nodes. :: sigh ::
Fortunately, there is a better way. This whole routine should have been
returning the replacement rather than using CombineTo which is quite
hacky. Switch to that, and all the pieces fall together.
I suspect the same kind of miscompile is possible in the half-shuffle
folding code, and potentially the recursive folding code. I'll be
switching those over to a pattern more like this one for safety's sake
even though I don't immediately have any test cases for them. Note that
the only way I got a test case for this instance was with *heavily* DAG
combined 256-bit shuffle sequences generated by my fuzzer. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216319 91177308-0d34-0410-b5e6-96231b3b80d8
There are two parts to this. First, the plugin needs to tell gold the comdat by
setting comdat_key.
What gets things a bit more complicated is that gold only seems
symbols. In particular, if A is an alias to B, it only sees the symbols
A and B. It can then ask us to keep symbol A but drop symbol B. What
we have to do instead is to create an internal version of B and make A
an alias to that.
At some point some of this logic should be moved to lib/Linker so that
we don't map a Constant to an internal version just to have lib/Linker
map that again to the destination module.
The reason for implementing this in tools/gold for now is simplicity.
With it in place it should be possible to update clang to use comdats
for constructors and destructors on ELF without breaking the LTO
bootstrap. Once that is done I intend to come back and improve the
interface lib/Linker exposes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216302 91177308-0d34-0410-b5e6-96231b3b80d8
This commit expands llvm-cov's functionality by adding support for a new code coverage
tool that uses LLVM's coverage mapping format and clang's instrumentation based profiling.
The gcov compatible tool can be invoked by supplying the 'gcov' command as the first argument,
or by modifying the tool's name to end with 'gcov'.
Differential Revision: http://reviews.llvm.org/D4445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216300 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes PR20425.
During slice building, if all of the incoming values of a PHI node are the same, replace the PHI node with the common value. This simplification makes alloca's used by PHI nodes easier to promote.
Test Plan: Added three more tests in phi-and-select.ll
Reviewers: nlewycky, eliben, meheff, chandlerc
Reviewed By: chandlerc
Subscribers: zinovy.nis, hfinkel, baldrick, llvm-commits
Differential Revision: http://reviews.llvm.org/D4659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216299 91177308-0d34-0410-b5e6-96231b3b80d8
There's no need to do this if the user doesn't call va_start. In the
future, we're going to have thunks that forward these register
parameters with musttail calls, and they won't need these spills for
handling va_start.
Most of the test suite changes are adding va_start calls to existing
tests to keep things working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216294 91177308-0d34-0410-b5e6-96231b3b80d8
instruction from ARMInstrInfo to ARMBaseInstrInfo.
That way, thumb mode can also benefit from the advanced copy optimization.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216274 91177308-0d34-0410-b5e6-96231b3b80d8
Consider:
%add = add nuw i32 %a, -16777216
%and = and i32 %add, 255
Regardless of whether or not we demand the sign bit of %add, we cannot
replace -16777216 with 2130706432 without also removing 'nuw' from the
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216273 91177308-0d34-0410-b5e6-96231b3b80d8
Consider:
%add = add nsw i32 %a, -16777216
%and = and i32 %add, 255
Regardless of whether or not we demand the sign bit of %add, we cannot
replace -16777216 with 2130706432 without also removing 'nsw' from the
instruction.
This fixes PR20377.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216261 91177308-0d34-0410-b5e6-96231b3b80d8
In unreachable blocks it's legal to have instructions like "%x = op %x".
Such instuctions are not schedulable. Therefore the SLPVectorizer has to check for
unreachable blocks and ignore them.
Fixes bug 20646.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216256 91177308-0d34-0410-b5e6-96231b3b80d8
We now use a std::vector instead of a DenseSet to store the list of
label checks so that we can iterate over it deterministically.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216255 91177308-0d34-0410-b5e6-96231b3b80d8
Given something like X01XX + X01XX, we know that the result must look
like X1XXX.
Adapted from a patch by Richard Smith, test-case written by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216250 91177308-0d34-0410-b5e6-96231b3b80d8
In this case, we are creating an x86_fp80 slice for a union from C where
the padding bytes may contain real data. An x86_fp80 alloca is 16 bytes,
and that's just fine. We can't, however, use regular loads and stores to
access the slice, because the store size is only 10 bytes / 80 bits.
Instead, use memcpy and memset.
Fixes PR18726.
Reviewed By: chandlerc
Differential Revision: http://reviews.llvm.org/D5012
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216248 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the missing variable shift support for value type i8, i16, and i32.
This fixes <rdar://problem/18095685>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216242 91177308-0d34-0410-b5e6-96231b3b80d8
Somewhat unnoticed in the original implementation of discriminators, but
it could cause instructions to end up in new, small,
DW_TAG_lexical_blocks due to the use of DILexicalBlock to track
discriminator changes.
Instead, use DILexicalBlockFile which we already use to track file
changes without introducing new scopes, so it works well to track
discriminator changes in the same way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216239 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly achieved by providing the correct register class manually,
because getRegClassFor always returns the GPR*AllRegClass for MVT::i32 and
MVT::i64.
Also cleanup the code to use the FastEmitInst_* method whenever possible. This
makes sure that the operands' register class is properly constrained. For all
the remaining cases this adds the missing constrainOperandRegClass calls for
each operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216225 91177308-0d34-0410-b5e6-96231b3b80d8
