A global variable without an explicit alignment specified should be assumed to
be ABI-aligned according to its type, like on other platforms. This allows us
to use better memory operations when accessing it.
rdar://18533701
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223180 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it easier to debug Twine as the 'Kind' fields now show their enum values in lldb and not escaped characters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223178 91177308-0d34-0410-b5e6-96231b3b80d8
This frequently leads to cases like:
ldr xD, [xN, :lo12:var]
add xA, xN, :lo12:var
ldr xD, [xA, #8]
where the ADD would have been needed anyway, and the two distinct addressing
modes can prevent the formation of an ldp. Because of how we handle ADRP
(aggressively forming an ADRP/ADD pseudo-inst at ISel time), this pattern also
results in duplicated ADRP instructions (one on its own to cover the ldr, and
one combined with the add).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223172 91177308-0d34-0410-b5e6-96231b3b80d8
Such loops shouldn't be vectorized due to the loops form.
After applying loop-rotate (+simplifycfg) the tests again start to check
what they are intended to check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223170 91177308-0d34-0410-b5e6-96231b3b80d8
4i32 shuffles for single insertions into zero vectors lowers to X86vzmovl which was using (v)blendps - causing domain switch stalls. This patch fixes this by using (v)pblendw instead.
The updated tests on test/CodeGen/X86/sse41.ll still contain a domain stall due to the use of insertps - I'm looking at fixing this in a future patch.
Differential Revision: http://reviews.llvm.org/D6458
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223165 91177308-0d34-0410-b5e6-96231b3b80d8
--xunit-xml-output saves test results to disk in JUnit's xml format. This will allow Jenkins to report the details of a lit run.
Based on a patch by David Chisnall.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223163 91177308-0d34-0410-b5e6-96231b3b80d8
We've long supported readcyclecounter on PPC64, but it is easier there (the
read of the 64-bit time-base register can be accomplished via a single
instruction). This now provides an implementation for PPC32 as well. On PPC32,
the time-base register is still 64 bits, but can only be read 32 bits at a time
via two separate SPRs. The ISA manual explains how to do this properly (it
involves re-reading the upper bits and looping if the counter has wrapped while
being read).
This requires PPC to implement a custom integer splitting legalization for the
READCYCLECOUNTER node, turning it into a target-specific SDAG node, which then
gets turned into a pseudo-instruction, which is then expanded to the necessary
sequence (which has three SPR reads, the comparison and the branch).
Thanks to Paul Hargrove for pointing out to me that this was still unimplemented.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223161 91177308-0d34-0410-b5e6-96231b3b80d8
Reduce the number of nops emitted for stackmap shadows on AArch64 by counting
non-stackmap instructions up to the next branch target towards the requested
shadow.
<rdar://problem/14959522>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223156 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Like N32/N64, they must be passed in the upper bits of the register.
The new code could be merged with the existing if-statements but I've
refrained from doing this since it will make porting the O32 implementation
to tablegen harder later.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6463
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223148 91177308-0d34-0410-b5e6-96231b3b80d8
Previously .cpu directive in ARM assembler didnt switch to the new CPU and
therefore acted as a nop. This implemented real action for .cpu and eg.
allows to assembler FreeBSD kernel with -integrated-as.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223147 91177308-0d34-0410-b5e6-96231b3b80d8
This is the fourth and final patch in the statepoint series. It contains the documentation for the statepoint intrinsics and their usage.
There's definitely still room to improve the documentation here, but I wanted to get this landed so it was available for others. There will likely be a series of small cleanup changes over the next few weeks as we work to clarify and revise the documentation. If you have comments or questions, please feel free to discuss them either in this commit thread, the original review thread, or on llvmdev. Comments are more than welcome.
Reviewed by: atrick, ributzka
Differential Revision: http://reviews.llvm.org/D5683
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223143 91177308-0d34-0410-b5e6-96231b3b80d8
Presumably it was added to the CMake system when MAXPATHLEN was still
used by code built for Windows. Currently only lib/Support/Path.inc uses
MAXPATHLEN, and it should be available on all Unices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223139 91177308-0d34-0410-b5e6-96231b3b80d8
This is the third patch in a small series. It contains the CodeGen support for lowering the gc.statepoint intrinsic sequences (223078) to the STATEPOINT pseudo machine instruction (223085). The change also includes the set of helper routines and classes for working with gc.statepoints, gc.relocates, and gc.results since the lowering code uses them.
With this change, gc.statepoints should be functionally complete. The documentation will follow in the fourth change, and there will likely be some cleanup changes, but interested parties can start experimenting now.
I'm not particularly happy with the amount of code or complexity involved with the lowering step, but at least it's fairly well isolated. The statepoint lowering code is split into it's own files and anyone not working on the statepoint support itself should be able to ignore it.
During the lowering process, we currently spill aggressively to stack. This is not entirely ideal (and we have plans to do better), but it's functional, relatively straight forward, and matches closely the implementations of the patchpoint intrinsics. Most of the complexity comes from trying to keep relocated copies of values in the same stack slots across statepoints. Doing so avoids the insertion of pointless load and store instructions to reshuffle the stack. The current implementation isn't as effective as I'd like, but it is functional and 'good enough' for many common use cases.
In the long term, I'd like to figure out how to integrate the statepoint lowering with the register allocator. In principal, we shouldn't need to eagerly spill at all. The register allocator should do any spilling required and the statepoint should simply record that fact. Depending on how challenging that turns out to be, we may invest in a smarter global stack slot assignment mechanism as a stop gap measure.
Reviewed by: atrick, ributzka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223137 91177308-0d34-0410-b5e6-96231b3b80d8
Follow up from r222926. Also handle multiple destinations from merged
cases on multiple and subsequent phi instructions.
rdar://problem/19106978
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223135 91177308-0d34-0410-b5e6-96231b3b80d8
Go through implicit defs of CSMI and MI, and clear the kill flags on
their uses in all the instructions between CSMI and MI.
We might have made some of the kill flags redundant, consider:
subs ... %NZCV<imp-def> <- CSMI
csinc ... %NZCV<imp-use,kill> <- this kill flag isn't valid anymore
subs ... %NZCV<imp-def> <- MI, to be eliminated
csinc ... %NZCV<imp-use,kill>
Since we eliminated MI, and reused a register imp-def'd by CSMI
(here %NZCV), that register, if it was killed before MI, should have
that kill flag removed, because it's lifetime was extended.
Also, add an exhaustive testcase for the motivating example.
Reviewed by: Juergen Ributzka <juergen@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223133 91177308-0d34-0410-b5e6-96231b3b80d8
The blocking code originated in ARM, which is more aggressive about casting
types to a canonical representative before doing anything else, so I missed out
most vector HFAs and broke the ABI. This should fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223126 91177308-0d34-0410-b5e6-96231b3b80d8
This operating system type represents the AMD HSA runtime,
and will be required by the R600 backend in order to generate
correct code for this runtime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223124 91177308-0d34-0410-b5e6-96231b3b80d8
Load instructions are inserted into loop preheaders when sinking stores
and later removed if not used by the SSA updater. Avoid sinking if the
loop has no preheader and avoid crashes. This fixes one more side effect
of not handling indirectbr instructions properly on LoopSimplify.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223119 91177308-0d34-0410-b5e6-96231b3b80d8
Removing an unused function which is causing one of the build bots to fail.
This was introduced in the commit r223113. A proper cleanup of the so_imm
tblgen defintion (made redundant by the mod_imm definition) needs to happen
soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223115 91177308-0d34-0410-b5e6-96231b3b80d8
Certain ARM instructions accept 32-bit immediate operands encoded as a 8-bit
integer value (0-255) and a 4-bit rotation (0-30, even). Current ARM assembly
syntax support in LLVM allows the decoded (32-bit) immediate to be specified
as a single immediate operand for such instructions:
mov r0, #4278190080
The ARMARM defines an extended assembly syntax allowing the encoding to be made
more explicit, as in:
mov r0, #255, #8 ; (same 32-bit value as above)
The behaviour of the two instructions can be different w.r.t flags, which is
documented under "Modified immediate constants" in ARMARM. This patch enables
support for this extended syntax at the MC layer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223113 91177308-0d34-0410-b5e6-96231b3b80d8
The default ARM floating-point mode does not support IEEE 754 mode exactly. Of
relevance to this patch is that input denormals are flushed to zero. The way in
which they're flushed to zero depends on the architecture,
* For VFPv2, it is implementation defined as to whether the sign of zero is
preserved.
* For VFPv3 and above, the sign of zero is always preserved when a denormal
is flushed to zero.
When FP support has been disabled, the strategy taken by this patch is to
assume the software support will mirror the behaviour of the hardware support
for the target *if it existed*. That is, for architectures which can only have
VFPv2, it is assumed the software will flush to positive zero. For later
architectures it is assumed the software will flush to zero preserving sign.
Change-Id: Icc5928633ba222a4ba3ca8c0df44a440445865fd
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223110 91177308-0d34-0410-b5e6-96231b3b80d8
In both the Unix and Windows variants, std::getenv was called and the
result passed directly to a function accepting a StringRef. This isn't
OK because it might return a null pointer and that causes the StringRef
constructor to assert (and generally produces crash-prone code if
asserts are disabled). Fix this by independently testing the result as
non-null prior to splitting things.
This in turn uncovered another bug in the Unix variant where it would
infinitely recurse if PATH="", or after this fix if PATH isn't set.
There is no need to recurse at all. Slightly re-arrange the code to make
it clear that we can just fixup the Paths argument based on the
environment if we find anything.
I don't know of a particularly useful way to test these routines in
LLVM. I'll commit a test to Clang that ensures that its driver correctly
handles various settings of PATH. However, I have no idea how to
correctly write a Windows test for the PATHEXT change. Any Windows
developers who could provide such a test, please have at. =D
Many thanks to Nick Lewycky and others for helping debug this. =/ It was
quite nasty for us to track down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223099 91177308-0d34-0410-b5e6-96231b3b80d8
System memory allocation functions, which are identified at the IR level by the
noalias attribute on the return value, must return a pointer into a memory region
disjoint from any other memory accessible to the caller. We can use this
property to simplify pointer comparisons between allocated memory and local
stack addresses and the addresses of global variables. Neither the stack nor
global variables can overlap with the region used by the memory allocator.
Fixes PR21556.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223093 91177308-0d34-0410-b5e6-96231b3b80d8
This is the second patch in a small series. This patch contains the MachineInstruction and x86-64 backend pieces required to lower Statepoints. It does not include the code to actually generate the STATEPOINT machine instruction and as a result, the entire patch is currently dead code. I will be submitting the SelectionDAG parts within the next 24-48 hours. Since those pieces are by far the most complicated, I wanted to minimize the size of that patch. That patch will include the tests which exercise the functionality in this patch. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
The STATEPOINT psuedo node is generated after all gc values are explicitly spilled to stack slots. The purpose of this node is to wrap an actual call instruction while recording the spill locations of the meta arguments used for garbage collection and other purposes. The STATEPOINT is modeled as modifing all of those locations to prevent backend optimizations from forwarding the value from before the STATEPOINT to after the STATEPOINT. (Doing so would break relocation semantics for collectors which wish to relocate roots.)
The implementation of STATEPOINT is closely modeled on PATCHPOINT. Eventually, much of the code in this patch will be removed. The long term plan is to merge the functionality provided by statepoints and patchpoints. Merging their implementations in the backend is likely to be a good starting point.
Reviewed by: atrick, ributzka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223085 91177308-0d34-0410-b5e6-96231b3b80d8
The statepoint intrinsics are intended to enable precise root tracking through the compiler as to support garbage collectors of all types. The addition of the statepoint intrinsics to LLVM should have no impact on the compilation of any program which does not contain them. There are no side tables created, no extra metadata, and no inhibited optimizations.
A statepoint works by transforming a call site (or safepoint poll site) into an explicit relocation operation. It is the frontend's responsibility (or eventually the safepoint insertion pass we've developed, but that's not part of this patch series) to ensure that any live pointer to a GC object is correctly added to the statepoint and explicitly relocated. The relocated value is just a normal SSA value (as seen by the optimizer), so merges of relocated and unrelocated values are just normal phis. The explicit relocation operation, the fact the statepoint is assumed to clobber all memory, and the optimizers standard semantics ensure that the relocations flow through IR optimizations correctly.
This is the first patch in a small series. This patch contains only the IR parts; the documentation and backend support will be following separately. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
Reviewed by: atrick, ributzka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223078 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
".weak" symbols cannot be consumed by ptxas (PR21685). This patch makes the
weak directive in MCAsmPrinter customizable, and disables emitting ".weak"
symbols for NVPTX.
Test Plan: weak-linkage.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: majnemer, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D6455
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223077 91177308-0d34-0410-b5e6-96231b3b80d8
r208210 introduced an optimization that improves the vector select
codegen by doing the setcc on vectors directly.
This is a problem they the setcc operands are i1s, because the
optimization would create vectors of i1, which aren't legal.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6308
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223075 91177308-0d34-0410-b5e6-96231b3b80d8
r213378 improved f16 bitcasts, so that they go directly through subregs,
instead of through the stack. That code now causes an assertion failure
for bitcasts from other 16-bits types (most importantly v2i8).
Correct that by doing the custom lowering for i16 bitcasts only when the
input is an f16.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6307
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223074 91177308-0d34-0410-b5e6-96231b3b80d8
