The assembler parser common code supports recognizing symbol variants
using the @ modifer. On PowerPC, it should also be possible to use
(some of) those modifiers with directional labels, like "1f@l".
This patch adds support for accepting symbol variants on directional
labels as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184437 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for having the assembler optimize fixups
to constructs like "symbol@ha" or "symbol@l" if "symbol" can be
resolved at assembler time.
This optimization is already present in the PPCMCExpr.cpp code
for handling PPC_HA16/PPC_LO16 target expressions. However,
those target expression were used only on Darwin targets.
This patch changes target expression code so that they are
usable also with the GNU assembler (using the @ha / @l syntax
instead of the ha16() / lo16() syntax), and changes the
MCInst lowering code to generate those target expressions
where appropriate.
It also changes the asm parser to generate HA16/LO16 target
expressions when parsing assembler source that uses the
@ha / @l modifiers. The effect is that now the above-
mentioned optimization automatically becomes available
for those situations too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184436 91177308-0d34-0410-b5e6-96231b3b80d8
I've been comparing the object file output of LLVM's integrated
assembler against the external assembler on PowerPC, and one
area where differences still remain are in DWARF sections.
In particular, the GNU assembler generates .debug_frame and
.debug_line sections using a code alignment factor of 4, since
all PowerPC instructions have size 4 and must be aligned to a
multiple of 4. However, current MC code hard-codes a code
alignment factor of 1.
This patch changes this by adding a "minimum instruction alignment"
data element to MCAsmInfo and using this as code alignment factor.
This requires passing a MCContext into MCDwarfLineAddr::Encode
and MCDwarfLineAddr::EncodeAdvanceLoc. Note that one caller,
MCDwarfLineAddr::Write, didn't actually have that information
available. However, it turns out that this routine is in fact
never used in the whole code base, so the patch simply removes
it. If it turns out to be needed again at a later time, it
could be re-added with an updated interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183834 91177308-0d34-0410-b5e6-96231b3b80d8
A couple of old test cases in test/MC/PowerPC were still using
LLVM IR. Now that we have a working assembler, we can move
them to assembler tests instead:
ppc64-initial-cfa.ll
ppc64-relocs-01.ll
ppc64-tls-relocs-01.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183829 91177308-0d34-0410-b5e6-96231b3b80d8
A plain "sc" without argument is supposed to be treated like "sc 0"
by the assembler. This patch adds a corresponding alias.
Problem reported by Joerg Sonnenberger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183687 91177308-0d34-0410-b5e6-96231b3b80d8
The extended branch mnemonics are supposed to use an implied CR0
if there is no explicit condition register specified. This patch
adds extra variants of the mnemonics to this effect.
Problem reported by Joerg Sonnenberger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183686 91177308-0d34-0410-b5e6-96231b3b80d8
For COFF and MachO, sections semantically have relocations that apply to them.
That is not the case on ELF.
In relocatable objects (.o), a section with relocations in ELF has offsets to
another section where the relocations should be applied.
In dynamic objects and executables, relocations don't have an offset, they have
a virtual address. The section sh_info may or may not point to another section,
but that is not actually used for resolving the relocations.
This patch exposes that in the ObjectFile API. It has the following advantages:
* Most (all?) clients can handle this more efficiently. They will normally walk
all relocations, so doing an effort to iterate in a particular order doesn't
save time.
* llvm-readobj now prints relocations in the same way the native readelf does.
* probably most important, relocations that don't point to any section are now
visible. This is the case of relocations in the rela.dyn section. See the
updated relocation-executable.test for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182908 91177308-0d34-0410-b5e6-96231b3b80d8
Now that fixup_ppc_ha16 and fixup_ppc_lo16 are being treated exactly
the same everywhere, it no longer makes sense to have two fixup types.
This patch merges them both into a single type fixup_ppc_half16,
and renames fixup_ppc_lo16_ds to fixup_ppc_half16ds for consistency.
(The half16 and half16ds names are taken from the description of
relocation types in the PowerPC ABI.)
No change in code generation expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182092 91177308-0d34-0410-b5e6-96231b3b80d8
The current PowerPC MC back end distinguishes between fixup_ppc_ha16
and fixup_ppc_lo16, which are determined by the instruction the fixup
applies to, and uses this distinction to decide whether a fixup ought
to resolve to the high or the low part of a symbol address.
This isn't quite correct, however. It is valid -if unusual- assembler
to use, e.g.
li 1, symbol@ha
or
lis 1, symbol@l
Whether the high or the low part of the address is used depends solely
on the @ suffix, not on the instruction.
In addition, both
li 1, symbol
and
lis 1, symbol
are valid, assuming the symbol address fits into 16 bits; again, both
will then refer to the actual symbol value (so li will load the value
itself, while lis will load the value shifted by 16).
To fix this, two places need to be adapted. If the fixup cannot be
resolved at assembler time, a relocation needs to be emitted via
PPCELFObjectWriter::getRelocType. This routine already looks at
the VK_ type to determine the relocation. The only problem is that
will reject any _LO modifier in a ha16 fixup and vice versa. This
is simply incorrect; any of those modifiers ought to be accepted
for either fixup type.
If the fixup *can* be resolved at assembler time, adjustFixupValue
currently selects the high bits of the symbol value if the fixup
type is ha16. Again, this is incorrect; see the above example
lis 1, symbol
Now, in theory we'd have to respect a VK_ modifier here. However,
in fact common code never even attempts to resolve symbol references
using any nontrivial VK_ modifier at assembler time; it will always
fall back to emitting a reloc and letting the linker handle it.
If this ever changes, presumably there'd have to be a target callback
to resolve VK_ modifiers. We'd then have to handle @ha etc. there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182091 91177308-0d34-0410-b5e6-96231b3b80d8
Now that applyFixup understands differently-sized fixups, we can define
fixup_ppc_lo16/fixup_ppc_lo16_ds/fixup_ppc_ha16 to properly be 2-byte
fixups, applied at an offset of 2 relative to the start of the
instruction text.
This has the benefit that if we actually need to generate a real
relocation record, its address will come out correctly automatically,
without having to fiddle with the offset in adjustFixupOffset.
Tested on both 64-bit and 32-bit PowerPC, using external and
integrated assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181894 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extends test/MC/PowerPC/ppc64-fixups.s to not only check for
the correct fixup type in the --show-encoding output, but also runs the
generated object file through llvm-readobj -r and verifies that the
correct ELF relocation records were generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181453 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for PowerPC platform-specific variant
kinds in MCSymbolRefExpr::getVariantKindForName, and also
adds a test case to verify they are translated to the appropriate
fixup type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181053 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a couple of Book II instructions (isync, icbi) to the
PowerPC assembler parser. These are needed when bootstrapping clang
with the integrated assembler forced on, because they are used in
inline asm statements in the code base.
The test case adds the full list of Book II storage control instructions,
including associated extended mnemonics. Again, those that are not yet
supported as marked as FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181052 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds infrastructure to support extended mnemonics in the
PowerPC assembler parser. It adds support specifically for those
extended mnemonics that LLVM will itself generate.
The test case lists *all* extended mnemonics according to the
PowerPC ISA v2.06 Book I, but marks those not yet supported
as FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181051 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler parser support to the PowerPC back end.
The parser will run for any powerpc-*-* and powerpc64-*-* triples,
but was tested only on 64-bit Linux. The supported syntax is
intended to be compatible with the GNU assembler.
The parser does not yet support all PowerPC instructions, but
it does support anything that is generated by LLVM itself.
There is no support for testing restricted instruction sets yet,
i.e. the parser will always accept any instructions it knows,
no matter what feature flags are given.
Instruction operands will be checked for validity and errors
generated. (Error handling in general could still be improved.)
The patch adds a number of test cases to verify instruction
and operand encodings. The tests currently cover all instructions
from the following PowerPC ISA v2.06 Book I facilities:
Branch, Fixed-point, Floating-Point, and Vector.
Note that a number of these instructions are not yet supported
by the back end; they are marked with FIXME.
A number of follow-on check-ins will add extra features. When
they are all included, LLVM passes all tests (including bootstrap)
when using clang -cc1as as the system assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181050 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adjust the r171506 to make all DWARF enconding pc-relative
for PPC64. It also adds the R_PPC64_REL32 relocation handling in MCJIT
(since the eh_frame will not generate PIC-relative relocation) and also
adds the emission of stubs created by the TTypeEncoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171979 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the PPC eh_frame definitions for the personality and
frame unwinding for PIC objects. It makes PIC build correctly creates
relative relocations in the '.rela.eh_frame' segments and thus avoiding
a text relocation that generates a DT_TEXTREL segments in link phase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171506 91177308-0d34-0410-b5e6-96231b3b80d8
The createPPCMCAsmInfo routine used PPC::R1 as the initial frame
pointer register, but on PPC64 the 32-bit R1 register does not
have a corresponding DWARF number, causing invalid CIE initial
frame state to be emitted. Fix by using PPC::X1 instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168799 91177308-0d34-0410-b5e6-96231b3b80d8
PPC64 target. The five tests modified herein test code generation that is
sensitive to the code model selected. So I've added -code-model=small to
the RUN commands for each.
Since small code model is the default, this has no effect for now; but this
prepares us for eventually changing the default to medium code model for PPC64.
Test changes verified with small and medium code model as default on
powerpc64-unknown-linux-gnu. All tests continue to pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167999 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds initial PPC64 TOC MC object creation using the small mcmodel
(a single 64K TOC) adding the some TOC relocations (R_PPC64_TOC,
R_PPC64_TOC16, and R_PPC64_TOC16DS).
The addition of 'undefinedExplicitRelSym' hook on 'MCELFObjectTargetWriter'
is meant to avoid the creation of an unreferenced ".TOC." symbol (used in
the .odp creation) as well to set the R_PPC64_TOC relocation target as the
temporary ".TOC." symbol. On PPC64 ABI, the R_PPC64_TOC relocation should
not point to any symbol.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166677 91177308-0d34-0410-b5e6-96231b3b80d8