input the the mul is a zext from bool, just that it is all zeros
other than the low bit. This fixes some phase ordering issues
that would cause us to miss some xforms in mul.ll when the worklist
is visited differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83794 91177308-0d34-0410-b5e6-96231b3b80d8
phi nodes. Make sure to phi translate from the right block.
This fixes a llvm-building-llvm failure on GVN-PRE.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82970 91177308-0d34-0410-b5e6-96231b3b80d8
simple constants for the true/false value of the select. We now
do phi translation etc. This really fixes PR4895 :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82917 91177308-0d34-0410-b5e6-96231b3b80d8
that are phi nodes. Also tighten up FoldOpIntoPhi to treat constantexpr
operands to phis just like other variables, avoiding moving constantexpr
computations around.
Patch by Daniel Dunbar.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82913 91177308-0d34-0410-b5e6-96231b3b80d8
more than one phi, since that leads to higher register pressure on
entry to the phi. This is especially problematic when the phi is in
a loop header, as it increases register pressure throughout the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81993 91177308-0d34-0410-b5e6-96231b3b80d8
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81537 91177308-0d34-0410-b5e6-96231b3b80d8
how to fold notionally-out-of-bounds array getelementptr indices instead
of just doing these in lib/Analysis/ConstantFolding.cpp, because it can
be done in a fairly general way without TargetData, and because not all
constants are visited by lib/Analysis/ConstantFolding.cpp. This enables
more constant folding.
Also, set the "inbounds" flag when the getelementptr indices are
one-past-the-end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81483 91177308-0d34-0410-b5e6-96231b3b80d8
within the notional bounds of the static type of the getelementptr (which
is not the same as "inbounds") from GlobalOpt into a utility routine,
and use it in ConstantFold.cpp to check whether there are any mis-behaved
indices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81478 91177308-0d34-0410-b5e6-96231b3b80d8
extractelement operations into a bitcast of the pointer,
then a gep, then a scalar load. Disable this when the vector
only has one element, because it leads to infinite loops in
instcombine (PR4908).
This transformation seems like a really bad idea to me, as it
will likely disable CSE of vector load/stores etc and can be
better done in the code generator when profitable. This
goes all the way back to the first days of packed types,
r25299 specifically.
I'll let those people who care about the performance of vector
code decide what to do with this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81185 91177308-0d34-0410-b5e6-96231b3b80d8
- I'd appreciate it if someone else eyeballs my changes to make sure I captured
the intent of the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81083 91177308-0d34-0410-b5e6-96231b3b80d8
changes: SimplifyDemandedBits can't use the builder yet because it
has the wrong insertion point. This fixes a crash building
MultiSource/Benchmarks/PAQ8p
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80537 91177308-0d34-0410-b5e6-96231b3b80d8
is itself a bitcast. Since we have gep(bitcast(bitcast(y))) in this
case, just wait for the two bitcasts to get zapped. This prevents
instcombine from confusing some aliasing stuff, and allows it to
directly eliminate the load in the testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80508 91177308-0d34-0410-b5e6-96231b3b80d8
array member of a struct, it's possible to land in an arbitrary position
inside that struct, such that attempting to find further getelementptr
indices will fail. In such cases, folding cannot be done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79485 91177308-0d34-0410-b5e6-96231b3b80d8
static extents of the static array type, it causes GlobalOpt and
other passes to be more conservative. This canonicalization also
allows the constant folder to add "inbounds" to GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79440 91177308-0d34-0410-b5e6-96231b3b80d8
the new load by the old load instead of by the extract element because
a store could have occurred between the load and extract element.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78891 91177308-0d34-0410-b5e6-96231b3b80d8
few places in InstCombine to use it, to fix problems handling pointer
types. This fixes the recent llvm-gcc bootstrap error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78005 91177308-0d34-0410-b5e6-96231b3b80d8
also apply to vectors. This allows us to compile this:
#include <emmintrin.h>
__m128i a(__m128 a, __m128 b) { return a==a & b==b; }
__m128i b(__m128 a, __m128 b) { return a!=a | b!=b; }
to:
_a:
cmpordps %xmm1, %xmm0
ret
_b:
cmpunordps %xmm1, %xmm0
ret
with clang instead of to a ton of horrible code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76863 91177308-0d34-0410-b5e6-96231b3b80d8
with negative tests: this test wasn't checking what it thought it was
because it was grepping .bc, not .ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76861 91177308-0d34-0410-b5e6-96231b3b80d8
Getelementptrs that are defined to wrap are virtually useless to
optimization, and getelementptrs that are undefined on any kind
of overflow are too restrictive -- it's difficult to ensure that
all intermediate addresses are within bounds. I'm going to take
a different approach.
Remove a few optimizations that depended on this flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76437 91177308-0d34-0410-b5e6-96231b3b80d8
insertelement/extractelement.
I'm not entirely sure this is precisely what we want to do: should we
prefer bitcast(insertelement) or insertelement(bitcast)? Similarly. should we
prefer extractelement(bitcast) or bitcast(extractelement)?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76345 91177308-0d34-0410-b5e6-96231b3b80d8
operands; it's possible to end up with a constant-foldable operand to
most instructions, even those which can't trap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75845 91177308-0d34-0410-b5e6-96231b3b80d8
(I think it's reasonably clear that we want to have a canonical form for
constructs like this; if anyone thinks that a select is not the best
canonical form, please tell me.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75531 91177308-0d34-0410-b5e6-96231b3b80d8
we could do this, doing so requires adjusting the demanded mask and the code isn't
doing that yet. This fixes PR4495
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74699 91177308-0d34-0410-b5e6-96231b3b80d8
failures.
To support this, add some utility functions to Type to help support
vector/scalar-independent code. Change ConstantInt::get and
ConstantFP::get to support vector types, and add an overload to
ConstantInt::get that uses a static IntegerType type, for
convenience.
Introduce a new getConstant method for ScalarEvolution, to simplify
common use cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73431 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
Instcombine to be more aggressive about using SimplifyDemandedBits
on shift nodes. This allows a shift to be simplified to zero in the
included test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72204 91177308-0d34-0410-b5e6-96231b3b80d8
is not known to be nothrow. This allows readnone/readonly functions
to be deleted even if we don't know whether the callee can throw.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71676 91177308-0d34-0410-b5e6-96231b3b80d8
checking for bcopy... no
checking for getc_unlocked... Assertion failed: (0 && "Unknown SCEV kind!"), function operator(), file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/Analysis/ScalarEvolution.cpp, line 511.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/libdecnumber/decUtility.c:360: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
make[4]: *** [decUtility.o] Error 1
make[4]: *** Waiting for unfinished jobs....
Assertion failed: (0 && "Unknown SCEV kind!"), function operator(), file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/Analysis/ScalarEvolution.cpp, line 511.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/libdecnumber/decNumber.c:5591: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
make[4]: *** [decNumber.o] Error 1
make[3]: *** [all-stage2-libdecnumber] Error 2
make[3]: *** Waiting for unfinished jobs....
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71165 91177308-0d34-0410-b5e6-96231b3b80d8
array and the add is within range. This helps simplify expressions
expanded by ScalarEvolutionExpander.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71158 91177308-0d34-0410-b5e6-96231b3b80d8
to support C99 inline, GNU extern inline, etc. Related bugzilla's
include PR3517, PR3100, & PR2933. Nothing uses this yet, but it
appears to work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68940 91177308-0d34-0410-b5e6-96231b3b80d8
integer types, unless they are already strange. This prevents it from
turning the code produced by SROA into crazy libcalls and stuff that
the code generator can't handle. In the attached example, the result
was an i96 multiply that caused the x86 backend to assert.
Note that if TargetData had an idea of what the legal types are for
a target that this could be used to stop instcombine from introducing
i64 muls, as Scott wanted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68598 91177308-0d34-0410-b5e6-96231b3b80d8
to/from integer types that are not intptr_t to convert to intptr_t
then do an integer conversion to the dest type. This exposes the
cast to the optimizer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67638 91177308-0d34-0410-b5e6-96231b3b80d8
1. Make instcombine always canonicalize trunc x to i1 into an icmp(x&1). This
exposes the AND to other instcombine xforms and is more of what the code
generator expects.
2. Rewrite the remaining trunc pattern match to use 'match', which
simplifies it a lot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67635 91177308-0d34-0410-b5e6-96231b3b80d8
ashr instcombine to help expose this code. And apply the fix to
SelectionDAG's copy of this code too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65364 91177308-0d34-0410-b5e6-96231b3b80d8
