It causes a number of regressions when -fintegrated-as is enabled. This happens
because there are codegen-only instructions that incorrectly uses the first
operand as the encoding for the $fcc register. The regressions do not occur when
-via-file-asm is also given.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215847 91177308-0d34-0410-b5e6-96231b3b80d8
This was a thinko. The intent was to flip the explicit bits that need toggling
rather than all bits. This would result in incorrect behaviour (which now is
tested).
Thanks to Nico Weber for pointing this out!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215846 91177308-0d34-0410-b5e6-96231b3b80d8
We already handle the no-slabs case when checking whether the current slab
is large enough: if no slabs have been allocated, CurPtr and End are both 0.
alignPtr(0), will still be 0, and so "if (Ptr + Size <= End)" fails.
Differential Revision: http://reviews.llvm.org/D4943
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215841 91177308-0d34-0410-b5e6-96231b3b80d8
It should remove dosens of lines in handling instrinsics (in a huge switch) and give an easy way to add new intrinsics.
I did not completed to move al intrnsics to the table, I'll do this in the upcomming commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215826 91177308-0d34-0410-b5e6-96231b3b80d8
While this might seem like an obvious canonicalization, there is one subtle problem with it. The result of the original expression
is undef when x is NaN (remember, fast math flags), but the result of the select is always defined when x is NaN. This means that the
new expression is strictly more defined than the original one. One unfortunate consequence of this is that the transform is not reversible!
It's always legal to make increase the defined-ness of an expression, but it's not legal to reduce it. Thus, targets that prefer the original
form of the expression cannot reverse the transform to recover it. Another way to think of it is that the transform has lost source-level
information (the fast math flags), which is undesirable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215825 91177308-0d34-0410-b5e6-96231b3b80d8
I'm using this to try to find more minimal test cases by re-fuzzing
within a specific domain once errors are found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215823 91177308-0d34-0410-b5e6-96231b3b80d8
While *most* (X sdiv 1) operations will get caught by InstSimplify, it
is still possible for a sdiv to appear in the worklist which hasn't been
simplified yet.
This means that it is possible for 0 - (X sdiv 1) to get transformed
into (X sdiv -1); dividing by -1 can make the transform produce undef
values instead of the proper result.
Sorry for the lack of testcase, it's a bit problematic because it relies
on the exact order of operations in the worklist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215818 91177308-0d34-0410-b5e6-96231b3b80d8
We can combne a mul with a div if one of the operands is a multiple of
the other:
%mul = mul nsw nuw %a, C1
%ret = udiv %mul, C2
=>
%ret = mul nsw %a, (C1 / C2)
This can expose further optimization opportunities if we end up
multiplying or dividing by a power of 2.
Consider this small example:
define i32 @f(i32 %a) {
%mul = mul nuw i32 %a, 14
%div = udiv exact i32 %mul, 7
ret i32 %div
}
which gets CodeGen'd to:
imull $14, %edi, %eax
imulq $613566757, %rax, %rcx
shrq $32, %rcx
subl %ecx, %eax
shrl %eax
addl %ecx, %eax
shrl $2, %eax
retq
We can now transform this into:
define i32 @f(i32 %a) {
%shl = shl nuw i32 %a, 1
ret i32 %shl
}
which gets CodeGen'd to:
leal (%rdi,%rdi), %eax
retq
This fixes PR20681.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215815 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch changes the way xfail and unsupported tests are displayed.
This output is only displayed when the --show-unsupported/--show-xfail flags are passed to lit.
Currently xfail/unsupported tests are printed during the run of the test-suite. I think its better to display this information during the summary instead.
This patch removes the printing of these tests from when they are run to the summary.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4842
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215809 91177308-0d34-0410-b5e6-96231b3b80d8
Block address forward-references are implemented by creating a
`BasicBlock` ahead of time that gets inserted in the `Function` when
it's eventually encountered.
However, if the same blockaddress was used in two separate functions
that were parsed *before* the referenced function (and the blockaddress
was never used at global scope), two separate basic blocks would get
created, one of which would be forgotten creating invalid IR.
This commit changes the forward-reference logic to create only one basic
block (and always return the same blockaddress).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215805 91177308-0d34-0410-b5e6-96231b3b80d8
This is an off-by-one bug I found by inspection, which would only
trigger if the bitcode writer sees more uses of a `Value` than the
reader. Since this is only relevant when an instruction gets upgraded
somehow, there unfortunately isn't a reasonable way to add test
coverage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215804 91177308-0d34-0410-b5e6-96231b3b80d8
Global variables that have `extern_weak` linkage may be null, so it's
incorrect to add `inbounds` when constant folding.
This also fixes a bug when parsing global aliases, whose forward
reference placeholders are global variables with `extern_weak` linkage.
If GEPs to these aliases are encountered before the alias itself, the
GEPs would incorrectly gain the `inbounds` keyword as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215803 91177308-0d34-0410-b5e6-96231b3b80d8
When combining a pair of shuffle nodes, check if the combined shuffle mask is
trivially Undef. In case, immediately fold that pair of shuffles to Undef.
The lack of checks for undef masks was the root-cause of a poor-codegen bug
in the dag combiner.
Example:
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 1, i32 1, i32 6>
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 4, i32 1, i32 6>
%3 = shufflevector <4 x i32> %2, <4 x i32> undef, <4 x i32> <i32 1, i32 5, i32 3, i32 3>
Before this patch, on x86 (with -mcpu=corei7) we failed to fold the entire
sequence to Undef value and therefore we generated:
shufps $-123, %xmm1, $xmm0
pshufd $-46, %xmm0, %xmm0
With this patch, the entire shuffle sequence is folded to Undef and no
shuffles are generated in the output assembly.
Added new test cases to test 'combine-vec-shuffle-5.ll'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215797 91177308-0d34-0410-b5e6-96231b3b80d8
A byval object, even if allocated at a fixed offset (prescribed by the ABI) is
pointed to by IR values. Most fixed-offset stack objects are not pointed-to by
IR values, so the default is to assume this is not possible. However, we need
to override the default in this case (instruction scheduling can cause
miscompiles otherwise).
Fixes PR20280.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215795 91177308-0d34-0410-b5e6-96231b3b80d8
We used to assume that any fixed-offset stack object was not aliased. This
meant that no IR value could point to the memory contained in such an object.
This is a reasonable default, but is not a universally-correct
target-independent fact. For example, on PowerPC (both Darwin and non-Darwin),
some byval arguments are allocated at fixed offsets by the ABI. These, however,
certainly can be pointed to by IR values. This change moves the 'isAliased'
logic out of FixedStackPseudoSourceValue and into MFI, and allows the isAliased
property to be overridden for fixed-offset objects.
This will be used by an upcoming commit to the PowerPC backend to fix PR20280.
No functionality change intended (the behavior of
FixedStackPseudoSourceValue::isAliased has been made more conservative for
callers that don't pass an MFI object, but I don't see any in-tree callers that
do that).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215794 91177308-0d34-0410-b5e6-96231b3b80d8
On PPC/Darwin, byval arguments occur at fixed stack offsets in the callee's
frame, but are not immutable -- the pointer value is directly available to the
higher-level code as the address of the argument, and the value of the byval
argument can be modified at the IR level.
This is necessary, but not sufficient, to fix PR20280. When PR20280 is fixed in
a follow-up commit, its test case will cover this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215793 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r215784 / 3f8a26f6fe.
LLD has 3 StringSaver's, one of which takes a lock when saving the
string... Need to investigate more closely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215790 91177308-0d34-0410-b5e6-96231b3b80d8
This class is generally useful.
In breaking it out, the primary change is that it has been made
non-virtual. It seems like being abstract led to there being 3 different
(2 in llvm + 1 in clang) concrete implementations which disagreed about
the ownership of the saved strings (see the manual call to free() in the
unittest StrDupSaver; yes this is different from the CommandLine.cpp
StrDupSaver which owns the stored strings; which is different from
Clang's StringSetSaver which just holds a reference to a
std::set<std::string> which owns the strings).
I've identified 2 other places in the
codebase that are open-coding this pattern:
memcpy(Alloc.Allocate<char>(strlen(S)+1), S, strlen(S)+1)
I'll be switching them over. They are
* llvm::sys::Process::GetArgumentVector
* The StringAllocator member of YAMLIO's Input class
This also will allow simplifying Clang's driver.cpp quite a bit.
Let me know if there are any other places that could benefit from
StringSaver. I'm also thinking of adding a saveStringRef member for
getting a stable StringRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215784 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, if you use a MultiArg<> option, then printing out the help/usage
message will cause an assert. This fixes getOptionHelpName() to work with
MultiArg Options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215770 91177308-0d34-0410-b5e6-96231b3b80d8
We were setting the comdat when functions were copied in the initial pass, but
not when they were linked only when we found out that they are needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215765 91177308-0d34-0410-b5e6-96231b3b80d8
The floating-point value positive zero (+0.0) is a valid immedate value
according to isFPImmLegal. As a result AArch64 FastISel went ahead and
used the immediate version of fmov to materialize the constant.
The problem is that the immediate version of fmov cannot encode an imediate for
postive zero. Instead a fmov from the zero register was supposed to be used in
this case.
This fix adds handling for this special case and uses fmov from the zero
register to materialize a positive zero (negative zeroes go to the constant
pool).
There is no test case for this, because this code is currently dead. It will be
enabled in a future commit and I will add a test case in a separate commit
after that.
This fixes <rdar://problem/18027157>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215753 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This reapplies r215582 without any modifications. The refactoring wasn't
responsible for the buildbot failures.
Original commit message:
Cleanup and prepare constant materialization code for future commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215752 91177308-0d34-0410-b5e6-96231b3b80d8
