The interesting case is what happens when you inline a musttail call
through a musttail call site. In this case, we can't break perfect
forwarding or allow any stack growth.
Instead of merging control flow from the inlined return instruction
after a musttail call into the body of the caller, leave the inlined
return instruction in the caller so that the musttail call stays in the
tail position.
More work is required in http://reviews.llvm.org/D3630 to handle the
case where the inlined function has dynamic allocas or byval arguments.
Reviewers: chandlerc
Differential Revision: http://reviews.llvm.org/D3491
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208910 91177308-0d34-0410-b5e6-96231b3b80d8
This allows code to statically accept a Function or a GlobalVariable, but
not an alias. This is already a cleanup by itself IMHO, but the main
reason for it is that it gives a lot more confidence that the refactoring to fix
the design of GlobalAlias is correct. That will be a followup patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208716 91177308-0d34-0410-b5e6-96231b3b80d8
Since ExtractValue is not included in ComputeSpeculationCost CFGs containing
ExtractValueInsts cannot be simplified. In particular this interacts with
InstCombineCompare's tendency to insert add.with.overflow intrinsics for
certain idiomatic math operations, preventing optimization.
This patch adds ExtractValue to the ComputeSpeculationCost. Test case included
rdar://14853450
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208434 91177308-0d34-0410-b5e6-96231b3b80d8
This moves most of GlobalOpt's constructor optimization
code out of GlobalOpt into Transforms/Utils/CDtorUtils.{h,cpp}. The
public interface is a single function OptimizeGlobalCtorsList() that
takes a predicate returning which constructors to remove.
GlobalOpt calls this with a function that statically evaluates all
constructors, just like it did before. This part of the change is
behavior-preserving.
Also add a call to this from GlobalDCE with a filter that removes global
constructors that contain a "ret" instruction and nothing else – this
fixes PR19590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207856 91177308-0d34-0410-b5e6-96231b3b80d8
Not all address taken blocks get inlined. The reason is
that a blocks new address is known only when it is cloned. But e.g.
a branch instruction in a different block could need that address earlier
while it gets cloned. The solution is to collect the set of all
blocks that can potentially get inlined and compute a new block address
up front. Then clone and cleanup.
rdar://16427209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207713 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This calls emitOptimizationRemark from the loop unroller and vectorizer
at the point where they make a positive transformation. For the
vectorizer, it reports vectorization and interleave factors. For the
loop unroller, it reports all the different supported types of
unrolling.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207528 91177308-0d34-0410-b5e6-96231b3b80d8
mapping from a basic block to an incoming value, either for removal or
just lookup, is linear in the number of predecessors, and we were doing
this for every entry in the 'Preds' list which is in many cases almost
all of them!
Unfortunately, the fixes are quite ugly. PHI nodes just don't make this
operation easy. The efficient way to fix this is to have a clever
'remove_if' operation on PHI nodes that lets us do a single pass over
all the incoming values of the original PHI node, extracting the ones we
care about. Then we could quickly construct the new phi node from this
list. This would remove the remaining underlying quadratic movement of
unrelated incoming values and the need for silly backwards looping to
"minimize" how often we hit the quadratic case.
This is the last obvious fix for PR19499. It shaves another 20% off the
compile time for me, and while UpdatePHINodes remains in the profile,
most of the time is now stemming from the well known inefficiencies of
LVI and jump threading.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207409 91177308-0d34-0410-b5e6-96231b3b80d8
more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
Repaired r207302.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207309 91177308-0d34-0410-b5e6-96231b3b80d8
more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207302 91177308-0d34-0410-b5e6-96231b3b80d8
buildbot - do not insert debug intrinsics before phi nodes.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207269 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info: Let dbg.values inserted by LowerDbgDeclare inherit the location
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207236 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207235 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207165 91177308-0d34-0410-b5e6-96231b3b80d8
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207135 91177308-0d34-0410-b5e6-96231b3b80d8
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine-intrinsics testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207130 91177308-0d34-0410-b5e6-96231b3b80d8
definition below all of the header #include lines, lib/Transforms/...
edition.
This one is tricky for two reasons. We again have a couple of passes
that define something else before the includes as well. I've sunk their
name macros with the DEBUG_TYPE.
Also, InstCombine contains headers that need DEBUG_TYPE, so now those
headers #define and #undef DEBUG_TYPE around their code, leaving them
well formed modular headers. Fixing these headers was a large motivation
for all of these changes, as "leaky" macros of this form are hard on the
modules implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206844 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
The -tailcallelim pass should be checking if byval or inalloca args can
be captured before marking calls as tail calls. This was the real root
cause of PR7272.
With a better fix in place, revert the inliner change from r105255. The
test case it introduced still passes and has been moved to
test/Transforms/Inline/byval-tail-call.ll.
Reviewers: chandlerc
Differential Revision: http://reviews.llvm.org/D3403
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206789 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This prevents the discriminator generation pass from triggering if
the DWARF version being used in the module is prior to 4.
Reviewers: echristo, dblaikie
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3413
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206507 91177308-0d34-0410-b5e6-96231b3b80d8
Also updated as many loops as I could find using df_begin/idf_begin -
strangely I found no uses of idf_begin. Is that just used out of tree?
Also a few places couldn't use df_begin because either they used the
member functions of the depth first iterators or had specific ordering
constraints (I added a comment in the latter case).
Based on a patch by Jim Grosbach. (Jim - you just had iterator_range<T>
where you needed iterator_range<idf_iterator<T>>)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206016 91177308-0d34-0410-b5e6-96231b3b80d8
This option caused LowerInvoke to generate code using SJLJ-based
exception handling, but there is no code left that interprets the
jmp_buf stack that the resulting code maintained (llvm.sjljeh.jblist).
This option has been obsolete for a while, and replaced by
SjLjEHPrepare.
This leaves the default behaviour of LowerInvoke, which is to convert
invokes to calls.
Differential Revision: http://llvm-reviews.chandlerc.com/D3136
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204388 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to generate table lookups for code such as:
unsigned test(unsigned x) {
switch (x) {
case 100: return 0;
case 101: return 1;
case 103: return 2;
case 105: return 3;
case 107: return 4;
case 109: return 5;
case 110: return 6;
default: return f(x);
}
}
Since cases 102, 104, etc. are not constants, the lookup table has holes
in those positions. We therefore guard the table lookup with a bitmask check.
Patch by Jasper Neumann!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203694 91177308-0d34-0410-b5e6-96231b3b80d8
optimize a call to a llvm intrinsic to something that invovles a call to a C
library call, make sure it sets the right calling convention on the call.
e.g.
extern double pow(double, double);
double t(double x) {
return pow(10, x);
}
Compiles to something like this for AAPCS-VFP:
define arm_aapcs_vfpcc double @t(double %x) #0 {
entry:
%0 = call double @llvm.pow.f64(double 1.000000e+01, double %x)
ret double %0
}
declare double @llvm.pow.f64(double, double) #1
Simplify libcall (part of instcombine) will turn the above into:
define arm_aapcs_vfpcc double @t(double %x) #0 {
entry:
%__exp10 = call double @__exp10(double %x) #1
ret double %__exp10
}
declare double @__exp10(double)
The pre-instcombine code works because calls to LLVM builtins are special.
Instruction selection will chose the right calling convention for the call.
However, the code after instcombine is wrong. The call to __exp10 will use
the C calling convention.
I can think of 3 options to fix this.
1. Make "C" calling convention just work since the target should know what CC
is being used.
This doesn't work because each function can use different CC with the "pcs"
attribute.
2. Have Clang add the right CC keyword on the calls to LLVM builtin.
This will work but it doesn't match the LLVM IR specification which states
these are "Standard C Library Intrinsics".
3. Fix simplify libcall so the resulting calls to the C routines will have the
proper CC keyword. e.g.
%__exp10 = call arm_aapcs_vfpcc double @__exp10(double %x) #1
This works and is the solution I implemented here.
Both solutions #2 and #3 would work. After carefully considering the pros and
cons, I decided to implement #3 for the following reasons.
1. It doesn't change the "spec" of the intrinsics.
2. It's a self-contained fix.
There are a couple of potential downsides.
1. There could be other places in the optimizer that is broken in the same way
that's not addressed by this.
2. There could be other calling conventions that need to be propagated by
simplify-libcall that's not handled.
But for now, this is the fix that I'm most comfortable with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203488 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a number of steps.
1) Move value_use_iterator into the Value class as an implementation
detail
2) Change it to actually be a *Use* iterator rather than a *User*
iterator.
3) Add an adaptor which is a User iterator that always looks through the
Use to the User.
4) Wrap these in Value::use_iterator and Value::user_iterator typedefs.
5) Add the range adaptors as Value::uses() and Value::users().
6) Update *all* of the callers to correctly distinguish between whether
they wanted a use_iterator (and to explicitly dig out the User when
needed), or a user_iterator which makes the Use itself totally
opaque.
Because #6 requires churning essentially everything that walked the
Use-Def chains, I went ahead and added all of the range adaptors and
switched them to range-based loops where appropriate. Also because the
renaming requires at least churning every line of code, it didn't make
any sense to split these up into multiple commits -- all of which would
touch all of the same lies of code.
The result is still not quite optimal. The Value::use_iterator is a nice
regular iterator, but Value::user_iterator is an iterator over User*s
rather than over the User objects themselves. As a consequence, it fits
a bit awkwardly into the range-based world and it has the weird
extra-dereferencing 'operator->' that so many of our iterators have.
I think this could be fixed by providing something which transforms
a range of T&s into a range of T*s, but that *can* be separated into
another patch, and it isn't yet 100% clear whether this is the right
move.
However, this change gets us most of the benefit and cleans up
a substantial amount of code around Use and User. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203364 91177308-0d34-0410-b5e6-96231b3b80d8
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203083 91177308-0d34-0410-b5e6-96231b3b80d8
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202838 91177308-0d34-0410-b5e6-96231b3b80d8
Move the test for this class into the IR unittests as well.
This uncovers that ValueMap too is in the IR library. Ironically, the
unittest for ValueMap is useless in the Support library (honestly, so
was the ValueHandle test) and so it already lives in the IR unittests.
Mmmm, tasty layering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202821 91177308-0d34-0410-b5e6-96231b3b80d8
name might indicate, it is an iterator over the types in an instruction
in the IR.... You see where this is going.
Another step of modularizing the support library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202815 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF discriminators are used to distinguish multiple control flow paths
on the same source location. When this happens, instructions across
basic block boundaries will share the same debug location.
This pass detects this situation and creates a new lexical scope to one
of the two instructions. This lexical scope is a child scope of the
original and contains a new discriminator value. This discriminator is
then picked up from MCObjectStreamer::EmitDwarfLocDirective to be
written on the object file.
This fixes http://llvm.org/bugs/show_bug.cgi?id=18270.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202752 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, have a DataLayoutPass that holds one. This will allow parts of LLVM
don't don't handle passes to also use DataLayout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202168 91177308-0d34-0410-b5e6-96231b3b80d8
I am really sorry for the noise, but the current state where some parts of the
code use TD (from the old name: TargetData) and other parts use DL makes it
hard to write a patch that changes where those variables come from and how
they are passed along.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201827 91177308-0d34-0410-b5e6-96231b3b80d8
The crux of the issue is that LCSSA doesn't preserve stateful alias
analyses. Before r200067, LICM didn't cause LCSSA to run in the LTO pass
manager, where LICM runs essentially without any of the other loop
passes. As a consequence the globalmodref-aa pass run before that loop
pass manager was able to survive the loop pass manager and be used by
DSE to eliminate stores in the function called from the loop body in
Adobe-C++/loop_unroll (and similar patterns in other benchmarks).
When LICM was taught to preserve LCSSA it had to require it as well.
This caused it to be run in the loop pass manager and because it did not
preserve AA, the stateful AA was lost. Most of LLVM's AA isn't stateful
and so this didn't manifest in most cases. Also, in most cases LCSSA was
already running, and so there was no interesting change.
The real kicker is that LCSSA by its definition (injecting PHI nodes
only) trivially preserves AA! All we need to do is mark it, and then
everything goes back to working as intended. It probably was blocking
some other weird cases of stateful AA but the only one I have is
a 1000-line IR test case from loop_unroll, so I don't really have a good
test case here.
Hopefully this fixes the regressions on performance that have been seen
since that revision.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201104 91177308-0d34-0410-b5e6-96231b3b80d8
Add the missing transformation strchr(p, 0) -> p + strlen(p) to SimplifyLibCalls
and remove the ToDo comment.
Reviewer: Duncan P.N. Exan Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200736 91177308-0d34-0410-b5e6-96231b3b80d8
LowerExpectIntrinsic previously only understood the idiom of an expect
intrinsic followed by a comparison with zero. For llvm.expect.i1, the
comparison would be stripped by the early-cse pass.
Patch by Daniel Micay.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200664 91177308-0d34-0410-b5e6-96231b3b80d8
preserve loop simplify of enclosing loops.
The problem here starts with LoopRotation which ends up cloning code out
of the latch into the new preheader it is buidling. This can create
a new edge from the preheader into the exit block of the loop which
breaks LoopSimplify form. The code tries to fix this by splitting the
critical edge between the latch and the exit block to get a new exit
block that only the latch dominates. This sadly isn't sufficient.
The exit block may be an exit block for multiple nested loops. When we
clone an edge from the latch of the inner loop to the new preheader
being built in the outer loop, we create an exiting edge from the outer
loop to this exit block. Despite breaking the LoopSimplify form for the
inner loop, this is fine for the outer loop. However, when we split the
edge from the inner loop to the exit block, we create a new block which
is in neither the inner nor outer loop as the new exit block. This is
a predecessor to the old exit block, and so the split itself takes the
outer loop out of LoopSimplify form. We need to split every edge
entering the exit block from inside a loop nested more deeply than the
exit block in order to preserve all of the loop simplify constraints.
Once we try to do that, a problem with splitting critical edges
surfaces. Previously, we tried a very brute force to update LoopSimplify
form by re-computing it for all exit blocks. We don't need to do this,
and doing this much will sometimes but not always overlap with the
LoopRotate bug fix. Instead, the code needs to specifically handle the
cases which can start to violate LoopSimplify -- they aren't that
common. We need to see if the destination of the split edge was a loop
exit block in simplified form for the loop of the source of the edge.
For this to be true, all the predecessors need to be in the exact same
loop as the source of the edge being split. If the dest block was
originally in this form, we have to split all of the deges back into
this loop to recover it. The old mechanism of doing this was
conservatively correct because at least *one* of the exiting blocks it
rewrote was the DestBB and so the DestBB's predecessors were fixed. But
this is a much more targeted way of doing it. Making it targeted is
important, because ballooning the set of edges touched prevents
LoopRotate from being able to split edges *it* needs to split to
preserve loop simplify in a coherent way -- the critical edge splitting
would sometimes find the other edges in need of splitting but not
others.
Many, *many* thanks for help from Nick reducing these test cases
mightily. And helping lots with the analysis here as this one was quite
tricky to track down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200393 91177308-0d34-0410-b5e6-96231b3b80d8
When simplifycfg moves an instruction, it must drop metadata it doesn't know
is still valid with the preconditions changes. In particular, it must drop
the range and tbaa metadata.
The patch implements this with an utility function to drop all metadata not
in a white list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200322 91177308-0d34-0410-b5e6-96231b3b80d8
LCSSA from it caused a crasher with the LoopUnroll pass.
This crasher is really nasty. We destroy LCSSA form in a suprising way.
When unrolling a loop into an outer loop, we not only need to restore
LCSSA form for the outer loop, but for all children of the outer loop.
This is somewhat obvious in retrospect, but hey!
While this seems pretty heavy-handed, it's not that bad. Fundamentally,
we only do this when we unroll a loop, which is already a heavyweight
operation. We're unrolling all of these hypothetical inner loops as
well, so their size and complexity is already on the critical path. This
is just adding another pass over them to re-canonicalize.
I have a test case from PR18616 that is great for reproducing this, but
pretty useless to check in as it relies on many 10s of nested empty
loops that get unrolled and deleted in just the right order. =/ What's
worse is that investigating this has exposed another source of failure
that is likely to be even harder to test. I'll try to come up with test
cases for these fixes, but I want to get the fixes into the tree first
as they're causing crashes in the wild.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200273 91177308-0d34-0410-b5e6-96231b3b80d8
uint32.
When folding branches to common destination, the updated branch weights
can exceed uint32 by more than factor of 2. We should keep halving the
weights until they can fit into uint32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200262 91177308-0d34-0410-b5e6-96231b3b80d8
the loops in a function, and teach LICM to work in the presance of
LCSSA.
Previously, LCSSA was a loop pass. That made passes requiring it also be
loop passes and unable to depend on function analysis passes easily. It
also caused outer loops to have a different "canonical" form from inner
loops during analysis. Instead, we go into LCSSA form and preserve it
through the loop pass manager run.
Note that this has the same problem as LoopSimplify that prevents
enabling its verification -- loop passes which run at the end of the loop
pass manager and don't preserve these are valid, but the subsequent loop
pass runs of outer loops that do preserve this pass trigger too much
verification and fail because the inner loop no longer verifies.
The other problem this exposed is that LICM was completely unable to
handle LCSSA form. It didn't preserve it and it actually would give up
on moving instructions in many cases when they were used by an LCSSA phi
node. I've taught LICM to support detecting LCSSA-form PHI nodes and to
hoist and sink around them. This may actually let LICM fire
significantly more because we put everything into LCSSA form to rotate
the loop before running LICM. =/ Now LICM should handle that fine and
preserve it correctly. The down side is that LICM has to require LCSSA
in order to preserve it. This is just a fact of life for LCSSA. It's
entirely possible we should completely remove LCSSA from the optimizer.
The test updates are essentially accomodating LCSSA phi nodes in the
output of LICM, and the fact that we now completely sink every
instruction in ashr-crash below the loop bodies prior to unrolling.
With this change, LCSSA is computed only three times in the pass
pipeline. One of them could be removed (and potentially a SCEV run and
a separate LoopPassManager entirely!) if we had a LoopPass variant of
InstCombine that ran InstCombine on the loop body but refused to combine
away LCSSA PHI nodes. Currently, this also prevents loop unrolling from
being in the same loop pass manager is rotate, LICM, and unswitch.
There is one thing that I *really* don't like -- preserving LCSSA in
LICM is quite expensive. We end up having to re-run LCSSA twice for some
loops after LICM runs because LICM can undo LCSSA both in the current
loop and the parent loop. I don't really see good solutions to this
other than to completely move away from LCSSA and using tools like
SSAUpdater instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200067 91177308-0d34-0410-b5e6-96231b3b80d8
Sweep the codebase for common typos. Includes some changes to visible function
names that were misspelt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200018 91177308-0d34-0410-b5e6-96231b3b80d8
function and a FunctionPass.
This has many benefits. The motivating use case was to be able to
compute function analysis passes *after* running LoopSimplify (to avoid
invalidating them) and then to run other passes which require
LoopSimplify. Specifically passes like unrolling and vectorization are
critical to wire up to BranchProbabilityInfo and BlockFrequencyInfo so
that they can be profile aware. For the LoopVectorize pass the only
things in the way are LoopSimplify and LCSSA. This fixes LoopSimplify
and LCSSA is next on my list.
There are also a bunch of other benefits of doing this:
- It is now very feasible to make more passes *preserve* LoopSimplify
because they can simply run it after changing a loop. Because
subsequence passes can assume LoopSimplify is preserved we can reduce
the runs of this pass to the times when we actually mutate a loop
structure.
- The new pass manager should be able to more easily support loop passes
factored in this way.
- We can at long, long last observe that LoopSimplify is preserved
across SCEV. This *halves* the number of times we run LoopSimplify!!!
Now, getting here wasn't trivial. First off, the interfaces used by
LoopSimplify are all over the map regarding how analysis are updated. We
end up with weird "pass" parameters as a consequence. I'll try to clean
at least some of this up later -- I'll have to have it all clean for the
new pass manager.
Next up I discovered a really frustrating bug. LoopUnroll *claims* to
preserve LoopSimplify. That's actually a lie. But the way the
LoopPassManager ends up running the passes, it always ran LoopSimplify
on the unrolled-into loop, rectifying this oversight before any
verification could kick in and point out that in fact nothing was
preserved. So I've added code to the unroller to *actually* simplify the
surrounding loop when it succeeds at unrolling.
The only functional change in the test suite is that we now catch a case
that was previously missed because SCEV and other loop transforms see
their containing loops as simplified and thus don't miss some
opportunities. One test case has been converted to check that we catch
this case rather than checking that we miss it but at least don't get
the wrong answer.
Note that I have #if-ed out all of the verification logic in
LoopSimplify! This is a temporary workaround while extracting these bits
from the LoopPassManager. Currently, there is no way to have a pass in
the LoopPassManager which preserves LoopSimplify along with one which
does not. The LPM will try to verify on each loop in the nest that
LoopSimplify holds but the now-Function-pass cannot distinguish what
loop is being verified and so must try to verify all of them. The inner
most loop is clearly no longer simplified as there is a pass which
didn't even *attempt* to preserve it. =/ Once I get LCSSA out (and maybe
LoopVectorize and some other fixes) I'll be able to re-enable this check
and catch any places where we are still failing to preserve
LoopSimplify. If this causes problems I can back this out and try to
commit *all* of this at once, but so far this seems to work and allow
much more incremental progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199884 91177308-0d34-0410-b5e6-96231b3b80d8
There has been an old FIXME to find the right cut-off for when it's worth
analyzing and potentially transforming a switch to a lookup table.
The switches always have two or more cases. I could not measure any speed-up
by transforming a switch with two cases. A switch with three cases gets a nice
speed-up, and I couldn't measure any compile-time regression, so I think this
is the right threshold.
In a Clang self-host, this causes 480 new switches to be transformed,
and reduces the final binary size with 8 KB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199294 91177308-0d34-0410-b5e6-96231b3b80d8
can be used by both the new pass manager and the old.
This removes it from any of the virtual mess of the pass interfaces and
lets it derive cleanly from the DominatorTreeBase<> template. In turn,
tons of boilerplate interface can be nuked and it turns into a very
straightforward extension of the base DominatorTree interface.
The old analysis pass is now a simple wrapper. The names and style of
this split should match the split between CallGraph and
CallGraphWrapperPass. All of the users of DominatorTree have been
updated to match using many of the same tricks as with CallGraph. The
goal is that the common type remains the resulting DominatorTree rather
than the pass. This will make subsequent work toward the new pass
manager significantly easier.
Also in numerous places things became cleaner because I switched from
re-running the pass (!!! mid way through some other passes run!!!) to
directly recomputing the domtree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199104 91177308-0d34-0410-b5e6-96231b3b80d8
directory. These passes are already defined in the IR library, and it
doesn't make any sense to have the headers in Analysis.
Long term, I think there is going to be a much better way to divide
these matters. The dominators code should be fully separated into the
abstract graph algorithm and have that put in Support where it becomes
obvious that evn Clang's CFGBlock's can use it. Then the verifier can
manually construct dominance information from the Support-driven
interface while the Analysis library can provide a pass which both
caches, reconstructs, and supports a nice update API.
But those are very long term, and so I don't want to leave the really
confusing structure until that day arrives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199082 91177308-0d34-0410-b5e6-96231b3b80d8
case when the lookup table doesn't have any holes.
This means we can build a lookup table for switches like this:
switch (x) {
case 0: return 1;
case 1: return 2;
case 2: return 3;
case 3: return 4;
default: exit(1);
}
The default case doesn't yield a constant result here, but that doesn't matter,
since a default result is only necessary for filling holes in the lookup table,
and this table doesn't have any holes.
This makes us transform 505 more switches in a clang bootstrap, and shaves 164 KB
off the resulting clang binary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199025 91177308-0d34-0410-b5e6-96231b3b80d8
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198685 91177308-0d34-0410-b5e6-96231b3b80d8
Now with a fix for PR18384: ValueHandleBase::ValueIsDeleted.
We need to invalidate SCEV's loop info when we delete a block, even if no values are hoisted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198631 91177308-0d34-0410-b5e6-96231b3b80d8
This commit was the source of crasher PR18384:
While deleting: label %for.cond127
An asserting value handle still pointed to this value!
UNREACHABLE executed at llvm/lib/IR/Value.cpp:671!
Reverting to get the builders green, feel free to re-land after fixing up.
(Renato has a handy isolated repro if you need it.)
This reverts commit r198478.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198503 91177308-0d34-0410-b5e6-96231b3b80d8
getSCEV for an ashr instruction creates an intermediate zext
expression when it truncates its operand.
The operand is initially inside the loop, so the narrow zext
expression has a non-loop-invariant loop disposition.
LoopSimplify then runs on an outer loop, hoists the ashr operand, and
properly invalidate the SCEVs that are mapped to value.
The SCEV expression for the ashr is now an AddRec with the hoisted
value as the now loop-invariant start value.
The LoopDisposition of this wide value was properly invalidated during
LoopSimplify.
However, if we later get the ashr SCEV again, we again try to create
the intermediate zext expression. We get the same SCEV that we did
earlier, and it is still cached because it was never mapped to a
Value. When we try to create a new AddRec we abort because we're using
the old non-loop-invariant LoopDisposition.
I don't have a solution for this other than to clear LoopDisposition
when LoopSimplify hoists things.
I think the long-term strategy should be to perform LoopSimplify on
all loops before computing SCEV and before running any loop opts on
individual loops. It's possible we may want to rerun LoopSimplify on
individual loops, but it should rarely do anything, so rarely require
invalidating SCEV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198478 91177308-0d34-0410-b5e6-96231b3b80d8
Split sadd.with.overflow into add + sadd.with.overflow to allow
analysis and optimization. This should ideally be done after
InstCombine, which can perform code motion (eventually indvars should
run after all canonical instcombines). We want ISEL to recombine the
add and the check, at least on x86.
This is currently under an option for reducing live induction
variables: -liv-reduce. The next step is reducing liveness of IVs that
are live out of the overflow check paths. Once the related
optimizations are fully developed, reviewed and tested, I do expect
this to become default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197926 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change the instrumented code before Ret instructions looked like:
<Unpoison Frame Redzones>
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
Now the instrumented code looks like:
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
else
<Unpoison Frame Redzones>
Reviewers: eugenis
Reviewed By: eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2458
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197907 91177308-0d34-0410-b5e6-96231b3b80d8
If we happen to eliminate every case in a switch that has branch
weights, we currently try to create metadata for the one remaining
branch, triggering an assert. Instead, we need to check that the
metadata we're trying to create is sensible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197791 91177308-0d34-0410-b5e6-96231b3b80d8
Currently SplitBlockAndInsertIfThen requires that branch condition is an
Instruction itself, which is very inconvenient, because it is sometimes an
Operator, or even a Constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197677 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids creating branch weight metadata of length one when we fold
cases into the default of a switch instruction, which was triggering
an assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196845 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR17872. This bug can lead to C++ destructors not being
called when they should be, when an exception is thrown.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196711 91177308-0d34-0410-b5e6-96231b3b80d8
Before this change, inlining one "invoke" into an outer "invoke" call
site can lead to the outer landingpad's catch/filter clauses being
copied multiple times into the resulting landingpad. This happens:
* when the inlined function contains multiple "resume" instructions,
because forwardResume() copies the clauses but is called multiple
times;
* when the inlined function contains a "resume" and a "call", because
HandleCallsInBlockInlinedThroughInvoke() copies the clauses but is
redundant with forwardResume().
Fix this by deduplicating the code.
This problem doesn't lead to any incorrect execution; it's only
untidy.
This change will make fixing PR17872 a little easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196710 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Rewrite asan's stack frame layout.
First, most of the stack layout logic is moved into a separte file
to make it more testable and (potentially) useful for other projects.
Second, make the frames more compact by using adaptive redzones
(smaller for small objects, larger for large objects).
Third, try to minimized gaps due to large alignments (this is hypothetical since
today we don't see many stack vars aligned by more than 32).
The frames indeed become more compact, but I'll still need to run more benchmarks
before committing, but I am sking for review now to get early feedback.
This change will be accompanied by a trivial change in compiler-rt tests
to match the new frame sizes.
Reviewers: samsonov, dvyukov
Reviewed By: samsonov
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2324
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196568 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to avoid unrelated changes other than fixing a few
hyphen-related ambiguities and contractions in nearby lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196471 91177308-0d34-0410-b5e6-96231b3b80d8
lowering only for load/stores to scalar allocas. The resulting values
confuse the backend and don't add anything because we can describe
array-allocas with a dbg.declare intrinsic just fine.
rdar://problem/15464571
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195052 91177308-0d34-0410-b5e6-96231b3b80d8
Generally speaking, control flow paths with error reporting calls are cold.
So far, error reporting calls are calls to perror and calls to fprintf,
fwrite, etc. with stderr as the stream. This can be extended in the future.
The primary motivation is to improve block placement (the cold attribute
affects the static branch prediction heuristics).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194943 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r193356, it caused PR17781.
A reduced test case covering this regression has been added to the test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193955 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an SimplifyLibCalls case which converts the special __sinpi and
__cospi (float & double variants) into a __sincospi_stret where appropriate to
remove duplicated work.
Patch by Tim Northover
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193943 91177308-0d34-0410-b5e6-96231b3b80d8
Given that backend does not handle "invoke asm" correctly ("invoke asm" will be
handled by SelectionDAGBuilder::visitInlineAsm, which does not have the right
setup for LPadToCallSiteMap) and we already made the assumption that inline asm
does not throw in InstCombiner::visitCallSite, we are going to make the same
assumption in Inliner to make sure we don't convert "call asm" to "invoke asm".
If it becomes necessary to add support for "invoke asm" later on, we will need
to modify the backend as well as remove the assumptions that inline asm does
not throw.
Fix rdar://15317907
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193808 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches GlobalStatus to analyze a call that uses the global value as
a callee, not as an argument.
With this change internalize call handle the common use of linkonce_odr
functions. This reduces the number of linkonce_odr functions in a LTO build of
clang (checked with the emit-llvm gold plugin option) from 1730 to 60.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193436 91177308-0d34-0410-b5e6-96231b3b80d8
When a linkonce_odr value that is on the dso list is not unnamed_addr
we can still look to see if anything is actually using its address. If
not, it is safe to hide it.
This patch implements that by moving GlobalStatus to Transforms/Utils
and using it in Internalize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193090 91177308-0d34-0410-b5e6-96231b3b80d8
A landing pad can be jumped to only by the unwind edge of an invoke
instruction. If we eliminate a partially redundant load in a landing pad, it
will create a basic block that violates this constraint. It then leads to other
problems down the line if it tries to merge that basic block with the landing
pad. Avoid this by not eliminating the load in a landing pad.
PR17621
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193064 91177308-0d34-0410-b5e6-96231b3b80d8
One optimization simplify-cfg performs is the converting of switches to
lookup tables if the switch has > 4 cases. This is done by:
1. Finding the max/min case value and calculating the switch case range.
2. Create a lookup table basic block.
3. Perform a check in the switch's BB to see if the input value is in
the switch's case range. If the input value satisfies said predicate
branch to the lookup table BB, otherwise branch to the switch's default
destination BB using the default value as the result.
The conditional check consists of subtracting the min case value of the
table from any input iN value and then ensuring that said value is
unsigned less than the size of the lookup table represented as an iN
value.
If the lookup table is a covered lookup table, the size of the table will be N
which is 0 as an iN value. Thus the comparison will be an `icmp ult` of an iN
value against 0 which is always false yielding the incorrect result.
This patch fixes this problem by recognizing if we have a covered lookup table
and if we do, unconditionally jumps to the lookup table BB since the covering
property of the lookup table implies no input values could not be handled by
said BB.
rdar://15268442
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193045 91177308-0d34-0410-b5e6-96231b3b80d8
If the predecessor's being spliced into a landing pad, then we need the PHIs to
come first and the rest of the predecessor's code to come *after* the landing
pad instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193035 91177308-0d34-0410-b5e6-96231b3b80d8
UpdatePHINodes has an optimization to reuse an existing PHI node, where it
first deletes all of its entries and then replaces them. Unfortunately, in the
case where we had duplicate predecessors (which are allowed so long as the
associated PHI entries have the same value), the loop removing the existing PHI
entries from the to-be-reused PHI would assert (if that PHI was not the one
which had the duplicates).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192001 91177308-0d34-0410-b5e6-96231b3b80d8
infrastructure.
This was essentially work toward PGO based on a design that had several
flaws, partially dating from a time when LLVM had a different
architecture, and with an effort to modernize it abandoned without being
completed. Since then, it has bitrotted for several years further. The
result is nearly unusable, and isn't helping any of the modern PGO
efforts. Instead, it is getting in the way, adding confusion about PGO
in LLVM and distracting everyone with maintenance on essentially dead
code. Removing it paves the way for modern efforts around PGO.
Among other effects, this removes the last of the runtime libraries from
LLVM. Those are being developed in the separate 'compiler-rt' project
now, with somewhat different licensing specifically more approriate for
runtimes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191835 91177308-0d34-0410-b5e6-96231b3b80d8
This makes using array_pod_sort significantly safer. The implementation relies
on function pointer casting but that should be safe as we're dealing with void*
here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191175 91177308-0d34-0410-b5e6-96231b3b80d8
The work on this project was left in an unfinished and inconsistent state.
Hopefully someone will eventually get a chance to implement this feature, but
in the meantime, it is better to put things back the way the were. I have
left support in the bitcode reader to handle the case-range bitcode format,
so that we do not lose bitcode compatibility with the llvm 3.3 release.
This reverts the following commits: 155464, 156374, 156377, 156613, 156704,
156757, 156804 156808, 156985, 157046, 157112, 157183, 157315, 157384, 157575,
157576, 157586, 157612, 157810, 157814, 157815, 157880, 157881, 157882, 157884,
157887, 157901, 158979, 157987, 157989, 158986, 158997, 159076, 159101, 159100,
159200, 159201, 159207, 159527, 159532, 159540, 159583, 159618, 159658, 159659,
159660, 159661, 159703, 159704, 160076, 167356, 172025, 186736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190328 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code missed some edge cases when e.g. we're going to emit sqrtf but
only the availability of sqrt was checked. This happens on odd platforms like
windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189724 91177308-0d34-0410-b5e6-96231b3b80d8
extremely subtle miscompilations (such as a load getting replaced with
the value stored *below* the load within a basic block) related to
promoting an alloca to an SSA value, there is the dim possibility that
you hit this. Please let me know if you won this unfortunate lottery.
The first half of mem2reg's core logic (as it is used both in the
standalone mem2reg pass and in SROA) builds up a mapping from
'Instruction *' to the index of that instruction within its basic block.
This allows quickly establishing which store dominate a particular load
even for large basic blocks. We cache this information throughout the
run of mem2reg over a function in order to amortize the cost of
computing it.
This is not in and of itself a strange pattern in LLVM. However, it
introduces a very important constraint: absolutely no instruction can be
deleted from the program without updating the mapping. Otherwise a newly
allocated instruction might get the same pointer address, and then end
up with a wrong index. Yes, LLVM routinely suffers from a *single
threaded* variant of the ABA problem. Most places in LLVM don't find
avoiding this an imposition because they don't both delete and create
new instructions iteratively, but mem2reg *loves* to do this... All the
time. Fortunately, the mem2reg code was really careful about updating
this cache to handle this eventuallity... except when it comes to the
debug declare intrinsic. Oops. The fix is to invalidate that pointer in
the cache when we delete it, the same as we do when deleting alloca
instructions and other instructions.
I've also caused the same bug in new code while working on a fix to
PR16867, so this seems to be a really unfortunate pattern. Hopefully in
subsequent patches the deletion of dead instructions can be consolidated
sufficiently to make it less likely that we'll see future occurences of
this bug.
Sorry for not having a test case, but I have literally no idea how to
reliably trigger this kind of thing. It may be single-threaded, but it
remains an ABA problem. It would require a really amazing number of
stars to align.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188367 91177308-0d34-0410-b5e6-96231b3b80d8
However, opt -O2 doesn't run mem2reg directly so nobody noticed until r188146
when SROA started sending more things directly down the PromoteMemToReg path.
In order to revert r187191, I also revert dependent revisions r187296, r187322
and r188146. Fixes PR16867. Does not add the testcases from that PR, but both
of them should get added for both mem2reg and sroa when this revert gets
unreverted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188327 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Doing work in constructors is bad: this change suggests to
call SpecialCaseList::create(Path, Error) instead of
"new SpecialCaseList(Path)". Currently the latter may crash with
report_fatal_error, which is undesirable - sometimes we want to report
the error to user gracefully - for example, if he provides an incorrect
file as an argument of Clang's -fsanitize-blacklist flag.
Reviewers: pcc
Reviewed By: pcc
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1327
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188156 91177308-0d34-0410-b5e6-96231b3b80d8
It is breaking builbots with libgmalloc enabled on Mac OS X.
$ cd llvm ; mkdir release ; cd release
$ ../configure --enable-optimized —prefix=$PWD/install
$ make
$ make check
$ Release+Asserts/bin/llvm-lit -v --param use_gmalloc=1 --param \
gmalloc_path=/usr/lib/libgmalloc.dylib \
../test/Instrumentation/DataFlowSanitizer/args-unreachable-bb.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188142 91177308-0d34-0410-b5e6-96231b3b80d8
This moves removeUnreachableBlocksFromFn from SimplifyCFGPass.cpp
to Utils/Local.cpp and uses it to replace the implementation of
llvm::removeUnreachableBlocks, which appears to do a strict subset
of what removeUnreachableBlocksFromFn does.
Differential Revision: http://llvm-reviews.chandlerc.com/D1334
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188119 91177308-0d34-0410-b5e6-96231b3b80d8
Our internal regex implementation does not cope with large numbers
of anchors very efficiently. Given a ~3600-entry special case list,
regex compilation can take on the order of seconds. This patch solves
the problem for the special case of patterns matching literal global
names (i.e. patterns with no regex metacharacters). Rather than
forming regexes from literal global name patterns, add them to
a StringSet which is checked before matching against the regex.
This reduces regex compilation time by an order of roughly thousands
when reading the aforementioned special case list, according to a
completely unscientific study.
No test cases. I figure that any new tests for this code should
check that regex metacharacters are properly recognised. However,
I could not find any documentation which documents the fact that the
syntax of global names in special case lists is based on regexes.
The extent to which regex syntax is supported in special case lists
should probably be decided on/documented before writing tests.
Differential Revision: http://llvm-reviews.chandlerc.com/D1150
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187732 91177308-0d34-0410-b5e6-96231b3b80d8
standards for LLVM. Remove duplicated comments on the interface from the
implementation file (implementation comments are left there of course).
Also clean up, re-word, and fix a few typos and errors in the commenst
spotted along the way.
This is in preparation for changes to these files and to keep the
uninteresting tidying in a separate commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187335 91177308-0d34-0410-b5e6-96231b3b80d8
useful in a subsequent patch, but causes an unfortunate amount of noise,
so I pulled it out into a separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187322 91177308-0d34-0410-b5e6-96231b3b80d8
analysis of the alloca. We don't need to visit all the users twice for
this. We build up a kill list during the analysis and then just process
it afterward. This recovers the tiny bit of performance lost by moving
to the visitor based analysis system as it removes one entire use-list
walk from mem2reg. In some cases, this is now faster than mem2reg was
previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187296 91177308-0d34-0410-b5e6-96231b3b80d8
Adds unit tests for it too.
Split BasicBlockUtils into an analysis-half and a transforms-half, and put the
analysis bits into a new Analysis/CFG.{h,cpp}. Promote isPotentiallyReachable
into llvm::isPotentiallyReachable and move it into Analysis/CFG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187283 91177308-0d34-0410-b5e6-96231b3b80d8
Merge consecutive if-regions if they contain identical statements.
Both transformations reduce number of branches. The transformation
is guarded by a target-hook, and is currently enabled only for +R600,
but the correctness has been tested on X86 target using a variety of
CPU benchmarks.
Patch by: Mei Ye
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187278 91177308-0d34-0410-b5e6-96231b3b80d8
robust. It now uses an InstVisitor and worklist to actually walk the
uses of the Alloca transitively and detect the pattern which we can
directly promote: loads & stores of the whole alloca and instructions we
can completely ignore.
Also, with this new implementation teach both the predicate for testing
whether we can promote and the promotion engine itself to use the same
code so we no longer have strange divergence between the two code paths.
I've added some silly test cases to demonstrate that we can handle
slightly more degenerate code patterns now. See the below for why this
is even interesting.
Performance impact: roughly 1% regression in the performance of SROA or
ScalarRepl on a large C++-ish test case where most of the allocas are
basically ready for promotion. The reason is because of silly redundant
work that I've left FIXMEs for and which I'll address in the next
commit. I wanted to separate this commit as it changes the behavior.
Once the redundant work in removing the dead uses of the alloca is
fixed, this code appears to be faster than the old version. =]
So why is this useful? Because the previous requirement for promotion
required a *specific* visit pattern of the uses of the alloca to verify:
we *had* to look for no more than 1 intervening use. The end goal is to
have SROA automatically detect when an alloca is already promotable and
directly hand it to the mem2reg machinery rather than trying to
partition and rewrite it. This is a 25% or more performance improvement
for SROA, and a significant chunk of the delta between it and
ScalarRepl. To get there, we need to make mem2reg actually capable of
promoting allocas which *look* promotable to SROA without have SROA do
tons of work to massage the code into just the right form.
This is actually the tip of the iceberg. There are tremendous potential
savings we can realize here by de-duplicating work between mem2reg and
SROA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187191 91177308-0d34-0410-b5e6-96231b3b80d8
The language reference says that:
"If a symbol appears in the @llvm.used list, then the compiler,
assembler, and linker are required to treat the symbol as if there is
a reference to the symbol that it cannot see"
Since even the linker cannot see the reference, we must assume that
the reference can be using the symbol table. For example, a user can add
__attribute__((used)) to a debug helper function like dump and use it from
a debugger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187103 91177308-0d34-0410-b5e6-96231b3b80d8
helper function. This leaves both trivial cases handled entirely in
helper functions and merely manages the list of allocas to process in
the run method.
The next step will be to handle all of the trivial promotion work prior
to even creating the core class and the subsequent simplifications that
enables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186784 91177308-0d34-0410-b5e6-96231b3b80d8
a single block into the helper routine. This takes advantage of the fact
that we can directly replace uses prior to any store with undef to
simplify matters and unconditionally promote allocas only used within
one block.
I've removed the special handling for the case of no stores existing.
This has no semantic effect but might slow things down. I'll fix that in
a later patch when I refactor this entire thing to be easier to manage
the different cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186783 91177308-0d34-0410-b5e6-96231b3b80d8
handles the general cases.
The hope is to refactor this so that we don't end up building the entire
class for the trivial cases. I also want to lift a lot of the early
pre-processing in the initial segment of run() into a separate routine,
and really none of it needs to happen inside the primary promotion
class.
These routines in particular used none of the actual state in the
promotion class, so they don't really make sense as members.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186781 91177308-0d34-0410-b5e6-96231b3b80d8
This struct is nicely independent of everything else, and we already
needed a foward declaration here. It's simpler to just define it
immediately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186780 91177308-0d34-0410-b5e6-96231b3b80d8
predecessors of the two blocks it is attempting to merge supply the
same incoming values to any phi in the successor block. This change
allows merging in the case where there is one or more incoming values
that are undef. The undef values are rewritten to match the non-undef
value that flows from the other edge. Patch by Mark Lacey.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186069 91177308-0d34-0410-b5e6-96231b3b80d8
A special case list can now specify categories for specific globals,
which can be used to instruct an instrumentation pass to treat certain
functions or global variables in a specific way, such as by omitting
certain aspects of instrumentation while keeping others, or informing
the instrumentation pass that a specific uninstrumentable function
has certain semantics, thus allowing the pass to instrument callers
according to those semantics.
For example, AddressSanitizer now uses the "init" category instead of
global-init prefixes for globals whose initializers should not be
instrumented, but which in all other respects should be instrumented.
The motivating use case is DataFlowSanitizer, which will have a
number of different categories for uninstrumentable functions, such
as "functional" which specifies that a function has pure functional
semantics, or "discard" which indicates that a function's return
value should not be labelled.
Differential Revision: http://llvm-reviews.chandlerc.com/D1092
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185978 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to create switches even if instcombine has munged two of the
incombing compares into one and some bit twiddling. This was motivated by enum
compares that are common in clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185632 91177308-0d34-0410-b5e6-96231b3b80d8
No functionality change.
It should suffice to check the type of a debug info metadata, instead of
calling Verify. For cases where we know the type of a DI metadata, use
assert.
Also update testing cases to make them conform to the format of DI classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185135 91177308-0d34-0410-b5e6-96231b3b80d8
The Builtin attribute is an attribute that can be placed on function call site that signal that even though a function is declared as being a builtin,
rdar://problem/13727199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185049 91177308-0d34-0410-b5e6-96231b3b80d8
