Also add subclasses MCSubRegIterator, MCSuperRegIterator, and
MCRegAliasIterator.
These iterators provide an abstract interface to the MCRegisterInfo
register lists so the internal representation can be changed without
changing all clients.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157695 91177308-0d34-0410-b5e6-96231b3b80d8
Besides adding the new insertPass function, this patch uses it to
enhance the existing -print-machineinstrs so that the MachineInstrs
after a specific pass can be printed.
Patch by Bin Zeng!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157655 91177308-0d34-0410-b5e6-96231b3b80d8
The register unit lists are typically much shorter than the register
overlap lists, and the backing table for register units has better cache
locality because it is smaller.
This makes llc about 0.5% faster. The regsOverlap() function isn't that hot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157651 91177308-0d34-0410-b5e6-96231b3b80d8
Register units are already used internally in TableGen to compute
register pressure sets and overlapping registers. This patch makes them
available to the code generators.
The register unit lists are differentially encoded so they can be reused
for many related registers. This keeps the total size of the lists below
200 bytes for most targets. ARM has the largest table at 560 bytes.
Add an MCRegUnitIterator for traversing the register unit lists. It
provides an abstract interface so the representation can be changed in
the future without changing all clients.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157650 91177308-0d34-0410-b5e6-96231b3b80d8
This required light surgery on the assembler and disassembler
because the instructions use an uncommon encoding. They are
the only two instructions in x86 that use register operands
and two immediates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157634 91177308-0d34-0410-b5e6-96231b3b80d8
Attribute bits above 1<<30 are now encoded correctly. Additionally,
the encoding/decoding functionality has been hoisted to helper functions
in Attributes.h in an effort to help the encoding/decoding to stay in
sync with the Attribute bitcode definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157581 91177308-0d34-0410-b5e6-96231b3b80d8
Implemented IntItem - the wrapper around APInt. Why not to use APInt item directly right now?
1. It will very difficult to implement case ranges as series of small patches. We got several large and heavy patches. Each patch will about 90-120 kb. If you replace ConstantInt with APInt in SwitchInst you will need to changes at the same time all Readers,Writers and absolutely all passes that uses SwitchInst.
2. We can implement APInt pool inside and save memory space. E.g. we use several switches that works with 256 bit items (switch on signatures, or strings). We can avoid value duplicates in this case.
3. IntItem can be easyly easily replaced with APInt.
4. Currenly we can interpret IntItem both as ConstantInt and as APInt. It allows to provide SwitchInst methods that works with ConstantInt for non-updated passes.
Why I need it right now? Currently I need to update SimplifyCFG pass (EqualityComparisons). I need to work with APInts directly a lot, so peaces of code
ConstantInt *V = ...;
if (V->getValue().ugt(AnotherV->getValue()) {
...
}
will look awful. Much more better this way:
IntItem V = ConstantIntVal->getValue();
if (AnotherV < V) {
}
Of course any reviews are welcome.
P.S.: I'm also going to rename ConstantRangesSet to IntegersSubset, and CRSBuilder to IntegersSubsetMapping (allows to map individual subsets of integers to the BasicBlocks).
Since in future these classes will founded on APInt, it will possible to use them in more generic ways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157576 91177308-0d34-0410-b5e6-96231b3b80d8
The only missing part is insert(), which uses a pair of parameters and I haven't
figured out how to convert it to rvalue references. It's now possible to use a
DenseMap with std::unique_ptr values :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157539 91177308-0d34-0410-b5e6-96231b3b80d8
to pass around a struct instead of a large set of individual values. This
cleans up the interface and allows more information to be added to the struct
for future targets without requiring changes to each and every target.
NV_CONTRIB
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157479 91177308-0d34-0410-b5e6-96231b3b80d8
The Hazard checker implements in-order contraints, or interlocked
resources. Ready instructions with hazards do not enter the available
queue and are not visible to other heuristics.
The major code change is the addition of SchedBoundary to encapsulate
the state at the top or bottom of the schedule, including both a
pending and available queue.
The scheduler now counts cycles in sync with the hazard checker. These
are minimum cycle counts based on known hazards.
Targets with no itinerary (x86_64) currently remain at cycle 0. To fix
this, we need to provide some maximum issue width for all targets. We
also need to add the concept of expected latency vs. minimum latency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157427 91177308-0d34-0410-b5e6-96231b3b80d8
move EmitGEPOffset from InstCombine to Transforms/Utils/Local.h
(a draft of this) patch reviewed by Andrew, thanks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157261 91177308-0d34-0410-b5e6-96231b3b80d8
This helps compile time when the greedy register allocator splits live
ranges in giant functions. Without the bias, we would try to grow
regions through the giant edge bundles, usually to find out that the
region became too big and expensive.
If a live range has many uses in blocks near the giant bundle, the small
negative bias doesn't make a big difference, and we still consider
regions including the giant edge bundle.
Giant edge bundles are usually connected to landing pads or indirect
branches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157174 91177308-0d34-0410-b5e6-96231b3b80d8
This class is meant to be the primary interface for examining a live
range in the vicinity on a given instruction. It avoids all the messy
dealings with iterators and early clobbers.
This is a more abstract interface to live ranges, hiding the
implementation as a vector of segments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157141 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise just looking up a value in the map requires creating a VH, adding it to the use lists and destroying it again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157124 91177308-0d34-0410-b5e6-96231b3b80d8
getUDivExpr attempts to simplify by checking for overflow.
isLoopEntryGuardedByCond then evaluates the loop predicate which
may lead to the same getUDivExpr causing endless recursion.
Fixes PR12868: clang 3.2 segmentation fault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157092 91177308-0d34-0410-b5e6-96231b3b80d8
Use a dedicated MachO load command to annotate data-in-code regions.
This is the same format the linker produces for final executable images,
allowing consistency of representation and use of introspection tools
for both object and executable files.
Data-in-code regions are annotated via ".data_region"/".end_data_region"
directive pairs, with an optional region type.
data_region_directive := ".data_region" { region_type }
region_type := "jt8" | "jt16" | "jt32" | "jta32"
end_data_region_directive := ".end_data_region"
The previous handling of ARM-style "$d.*" labels was broken and has
been removed. Specifically, it didn't handle ARM vs. Thumb mode when
marking the end of the section.
rdar://11459456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157062 91177308-0d34-0410-b5e6-96231b3b80d8
