I am planning to add more nested classes inside RuntimePointerCheck so
all these triple-nesting would be hard to follow.
Also rename it to RuntimePointerChecking (i.e. append 'ing').
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242218 91177308-0d34-0410-b5e6-96231b3b80d8
We used to take the address specified as the direct target of the patchpoint
and did no TOC-pointer handling. This, however, as not all that useful,
because MCJIT tends to create a lot of modules, and they have their own TOC
sections. Thus, to call from the generated code to other generated code, you
really need to switch TOC pointers. Make this work as expected, and under
ELFv1, tread the address as the function descriptor address so that the correct
TOC pointer can be loaded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242217 91177308-0d34-0410-b5e6-96231b3b80d8
For now the Archive owns the buffers of the thin archive members.
This makes for a simple API, but all the buffers are destructed
only when the archive is destructed. This should be fine since we
close the files after mmap so we should not hit an open file
limit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242215 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG already had begin/end methods for iterating over all
the nodes, but didn't define an iterator_range for us in foreach
loops.
This adds such a method and uses it in some of the eligible places
throughout the backends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242212 91177308-0d34-0410-b5e6-96231b3b80d8
There was a 32-bit padding gap between 'unsigned short NumOperands, NumValues;' and 'DebugLoc debugLoc. Move 'unsigned IROrder' in to that gap.
This trims the size of SDNode's from 76 bytes (really 80 due to alignment) to 72 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242211 91177308-0d34-0410-b5e6-96231b3b80d8
The simplify_type specialisation allows us to cast directly from
SDValue to an SDNode* subclass so we don't need to pass a SDNode*
to cast<>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242209 91177308-0d34-0410-b5e6-96231b3b80d8
This commit moves the function 'printReg' towards the start of the file so that
it can be used by the conversion methods in MIRPrinter and not just the printing
methods in MIPrinter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242203 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes an incidentally created instruction can duplicate a Value used
elsewhere. It then often doesn't end up in the leader table. If it's later
removed, we attempt to remove it from the leader table and segfault.
Instead we should just ignore the removal request, which won't cause any
problems. The reverse situation, where the original instruction is replaced by
the new one (which you might think could leave the leader table empty) cannot
occur, because the incidental instruction will never be found in the first
place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242199 91177308-0d34-0410-b5e6-96231b3b80d8
MOVSDto64rr and MOV64toSDrr are defined to convert between FR64 (%xmm)
<-> GR64 registers, not VR64 (%mm) <-> GR64. This is wrong.
I found this by inspection and could not find a suitable testcase for it
since (1) we don't handle MMX bitcasts in Peephole optimizer as to
generate COPYs that (2) could be expanded back to the appropriate x86
instruction in ExpandPostRA.
Switch to use the appropriate instructions: MMX_MOVD64from64rr and
MMX_MOVD64to64rr here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242191 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC uses itineraries to describe processor pipelines (and dispatch-group
restrictions for P7/P8 cores). Unfortunately, the target-independent
implementation of TII.getInstrLatency calls ItinData->getStageLatency, and that
looks for the largest cycle count in the pipeline for any given instruction.
This, however, yields the wrong answer for the PPC itineraries, because we
don't encode the full pipeline. Because the functional units are fully
pipelined, we only model the initial stages (there are no relevant hazards in
the later stages to model), and so the technique employed by getStageLatency
does not really work. Instead, we should take the maximum output operand
latency, and that's what PPCInstrInfo::getInstrLatency now does.
This caused some test-case churn, including two unfortunate side effects.
First, the new arrangement of copies we get from function parameters now
sometimes blocks VSX FMA mutation (a FIXME has been added to the code and the
test cases), and we have one significant test-suite regression:
SingleSource/Benchmarks/BenchmarkGame/spectral-norm
56.4185% +/- 18.9398%
In this benchmark we have a loop with a vectorized FP divide, and it with the
new scheduling both divides end up in the same dispatch group (which in this
case seems to cause a problem, although why is not exactly clear). The grouping
structure is hard to predict from the bottom of the loop, and there may not be
much we can do to fix this.
Very few other test-suite performance effects were really significant, but
almost all weakly favor this change. However, in light of the issues
highlighted above, I've left the old behavior available via a
command-line flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242188 91177308-0d34-0410-b5e6-96231b3b80d8
* Use the default install prefix (/usr/local) and use DESTDIR instead to
set a temporary install location for tarballing. This is the correct
way to package binary releases (otherwise the temporary install path
ends up in files in the binary release).
* Remove ``-disable-clang`` option. It did not work correctly
(tarballing assumed phase 3 was run) and when doing a release
we should always be doing a three-phased build and test.
Note: Technically we should only be using DESTDIR for the third phase
and use --prefix for the first and second phase because we run the built
clang from phase 1 and 2 (and in general an application's behaviour
may depend on the install prefix). However in the case of clang it
seems to not care what the install prefix was so to simplify the script
we use DESTDIR for all three stages.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242187 91177308-0d34-0410-b5e6-96231b3b80d8
Convert logical operations on general-purpose registers to the correspon-
ding operations on predicate registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242186 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change, personality directives were not emitted
if there was no invoke left in the function (of course until
recently this also meant that we couldn't know what
the personality actually was). This patch forces personality directives
to still be emitted, unless it is known to be a noop in the absence of
invokes, or the user explicitly specified `nounwind` (and not
`uwtable`) on the function.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D10884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242185 91177308-0d34-0410-b5e6-96231b3b80d8
We might not want to upgrade config.guess to the current
version due to the license change from GPL2 to GPL3.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242178 91177308-0d34-0410-b5e6-96231b3b80d8
This can be done only with moves which theoretically
will optimize better later.
Although this transform increases the instruction count,
it should be code size / cycle count neutral in the worst
VALU case. It also seems to slightly improve a couple
of testcases due to other DAG combines this exposes.
This is probably slightly worse for the SALU case, so
it might be better to handle this during moveToVALU,
although then you lose some simplifications like
the load width reducing in the simple testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242177 91177308-0d34-0410-b5e6-96231b3b80d8
If the read2 produced was supposed to be writing into a
super register, it would use the wrong subregister indices.
Fix this by inserting copies, so we only ever write to a vreg_64.
Run the register coalescer again to clean this up, although this
isn't ideal and often does result in an extra move.
Also remove the assert that offset1 > offset0.
There isn't a real reason to not allow this other than a minor
convenience in the compiler, and it doesn't seem worth the effort
of avoiding it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242174 91177308-0d34-0410-b5e6-96231b3b80d8
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242173 91177308-0d34-0410-b5e6-96231b3b80d8
Do not use MachineRegisterInfo::setPhysRegUsed()/isPhysRegUsed()
anymore. This bitset changes function-global state and is set by the
VirtRegRewriter anyway.
Simply use a bitvector private to RAGreedy.
Differential Revision: http://reviews.llvm.org/D10910
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242169 91177308-0d34-0410-b5e6-96231b3b80d8
The ones committed were orthogonal to the change and would have passed before
that revision. What it *did* do was prevent an assertion failure when
generating object files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242166 91177308-0d34-0410-b5e6-96231b3b80d8
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242165 91177308-0d34-0410-b5e6-96231b3b80d8
Generate extract instructions (via intrinsics) before the DAG combiner
folds shifts into unrecognizable forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242163 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 01446706b4.
Causes breakage, seems to be related to 'svn' in the file's name:
CC=gcc CXX=g++ \
../llvm/configure \
--prefix=/usr \
--sysconfdir=/etc \
--enable-shared \
--enable-libffi \
--enable-targets=all \
--disable-assertions \
--with-python=/usr/bin/python2 \
--enable-optimized
make REQUIRES_RTTI=1 ENABLE_PIC=1
results:
llvm[2]: Linking Release unit test Support (without symbols)
llvm[2]: ======= Finished Linking Release Unit test Support (without symbols)
make[3]: Entering directory '/build/llvm-svn/src/build/bindings/ocaml/llvm'
make[3]: *** No rule to make target '/build/llvm-
svn/src/build/Release/lib/ocaml/libLLVM-3.7.0svn.so', needed by 'build-
deplibs'. Stop.
make[3]: *** Waiting for unfinished jobs....
llvm[3]: Compiling llvm_ocaml.c for Release build
make[3]: Leaving directory '/build/llvm-svn/src/build/bindings/ocaml/llvm'
/build/llvm-svn/src/llvm/Makefile.rules:880: recipe for target 'all' failed
/build/llvm-svn/src/llvm/Makefile.rules:965: recipe for target 'all' failed
Differential Revision: http://reviews.llvm.org/D10716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242152 91177308-0d34-0410-b5e6-96231b3b80d8
