Author: Dave Airlie <airlied@redhat.com>
In order to implement indirect sampler loads, we don't
want to match on a VGPR load but an SGPR one for constants,
as we cannot feed VGPRs to the sampler only SGPRs.
this should be applicable for llvm 3.7 as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243294 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r243146.
Feedback from Craig Topper and David Blaikie was that we don't put const on Type as it has no mutable state.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243282 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply r242295 with fixes in the implementation.
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243271 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fix the cost of interleaved accesses for ARM/AArch64.
We were calling getTypeAllocSize and using it to check
the number of bits, when we should have called
getTypeAllocSizeInBits instead.
This would pottentially cause the vectorizer to
generate loads/stores and shuffles which cannot
be matched with an interleaved access instruction.
No performance changes are expected for now since
matching/generating interleaved accesses is still
disabled by default.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D11524
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243270 91177308-0d34-0410-b5e6-96231b3b80d8
When truncating to non-legal types (such as i16, i8 and i1) always use an AND
instruction to mask out the upper bits. This was only done when the source type
was an i64, but not when the source type was an i32.
This commit fixes this and adds the missing i32 truncate tests.
This fixes rdar://problem/21990703.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243198 91177308-0d34-0410-b5e6-96231b3b80d8
extension property we're requesting - zero or sign extended.
This fixes cases where we want to return a zero extended 32-bit -1
and not be sign extended for the entire register. Also updated the
already out of date comment with the current behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243192 91177308-0d34-0410-b5e6-96231b3b80d8
whether register x18 should be reserved.
This change is needed because we cannot use a backend option to set
cl::opt "aarch64-reserve-x18" when doing LTO.
Out-of-tree projects currently using cl::opt option "-aarch64-reserve-x18"
to reserve x18 should make changes to add subtarget feature "reserve-x18"
to the IR.
rdar://problem/21529937
Differential Revision: http://reviews.llvm.org/D11463
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243186 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of the pattern
for (auto I = x.rbegin(), E = x.end(); I != E; ++I)
we can use make_range to construct the reverse range and iterate using
that instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243163 91177308-0d34-0410-b5e6-96231b3b80d8
We had a few places where we did
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
but those could instead do
for (auto *EltTy : STy->elements()) {
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243136 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243114 91177308-0d34-0410-b5e6-96231b3b80d8
Some shufflevectors are currently being incorrectly lowered in the AArch32
backend as the existing checks for detecting the NEON operations from the
shufflevector instruction expects the shuffle mask and the vector operands to be
of the same length.
This is not always the case as the mask may be twice as long as the operand;
here only the lower half of the shufflemask gets checked, so provided the lower
half of the shufflemask looks like a vector transpose (or even is just all -1
for undef) then the intrinsics may get incorrectly lowered into a vector
transpose (VTRN) instruction.
This patch fixes this by accommodating for both cases and adds regression tests.
Differential Revision: http://reviews.llvm.org/D11407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243103 91177308-0d34-0410-b5e6-96231b3b80d8
is an immediate, in this check the value is negated and stored in and int64_t.
The value can be -2^63 yet the result cannot be stored in an int64_t and this
gives some undefined behaviour causing failures. The negation is only necessary
when the values is within a certain range and so it should not need to negate
-2^63, this patch introduces this and also a regression test.
Differential Revision: http://reviews.llvm.org/D11408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243100 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 0f720d984f.
It breaks clang too badly, I need to prepare a proper patch for clang
first.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243089 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243083 91177308-0d34-0410-b5e6-96231b3b80d8
Adds pushes to the folding tables.
This also required a fix to the TD definition, since the memory forms of
the push instructions did not have the right mayLoad/mayStore flags.
Differential Revision: http://reviews.llvm.org/D11340
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243010 91177308-0d34-0410-b5e6-96231b3b80d8
The DAG Node "SCALAR_TO_VECTOR" may be created if the type of the scalar element is legal.
Added a check for the scalar type before creating this node.
Added a test that fails with assertion on the current version.
Differential Revision: http://reviews.llvm.org/D11413
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242994 91177308-0d34-0410-b5e6-96231b3b80d8
This commit broke the build. Numerous build bots broken, and it was
blocking my progress so reverting.
It should be trivial to reproduce -- enable the BPF backend and it
should fail when running llvm-tblgen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242992 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add a basic CodeGen bitcode test which (for now) only prints out the function name and nothing else. The current code merely implements the basic needed for the test run to not crash / assert. Getting to that point required:
- Basic InstPrinter.
- Basic AsmPrinter.
- DiagnosticInfoUnsupported (not strictly required, but nice to have, duplicated from AMDGPU/BPF's ISelLowering).
- Some SP and register setup in WebAssemblyTargetLowering.
- Basic LowerFormalArguments.
- GenInstrInfo.
- Placeholder LowerFormalArguments.
- Placeholder CanLowerReturn and LowerReturn.
- Basic DAGToDAGISel::Select, which requiresGenDAGISel.inc as well as GET_INSTRINFO_ENUM with GenInstrInfo.inc.
- Remove WebAssemblyFrameLowering::determineCalleeSaves and rely on default.
- Implement WebAssemblyFrameLowering::hasFP, same as AArch64's implementation.
Follow-up patches will implement a real AsmPrinter, which will require adding MI opcodes specific to WebAssembly.
Reviewers: sunfish
Subscribers: aemerson, jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D11369
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242939 91177308-0d34-0410-b5e6-96231b3b80d8
Shrink-wrapping can now be tested on ARM with -enable-shrink-wrap.
Related to <rdar://problem/20821730>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242908 91177308-0d34-0410-b5e6-96231b3b80d8
through APIs that are no longer necessary now that the update API has
been removed.
This will make changes to the AA interfaces significantly less
disruptive (I hope). Either way, it seems like a really nice cleanup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242882 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MCRegAliasIterator only works for physical registers. So, do not run it
on virtual registers.
With this issue fixed, we can resurrect the BranchFolding pass in NVPTX
backend.
Reviewers: jholewinski, bkramer
Subscribers: henryhu, meheff, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242871 91177308-0d34-0410-b5e6-96231b3b80d8
This makes one substantive change and a few stylistic changes to the
VSX swap optimization pass.
The substantive change is to permit LXSDX and LXSSPX instructions to
participate in swap optimization computations. The previous change to
insert a swap following a SUBREG_TO_REG widening operation makes this
almost trivial.
I experimented with also permitting STXSDX and STXSSPX instructions.
This can be done using similar techniques: we could insert a swap
prior to a narrowing COPY operation, and then permit these stores to
participate. I prototyped this, but discovered that the pattern of a
narrowing COPY followed by an STXSDX does not occur in any of our
test-suite code. So instead, I added commentary indicating that this
could be done.
Other TLC:
- I changed SH_COPYSCALAR to SH_COPYWIDEN to more clearly indicate
the direction of the copy.
- I factored the insertion of swap instructions into a separate
function.
Finally, I added a new test case to check that the scalar-to-vector
loads are working properly with swap optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242838 91177308-0d34-0410-b5e6-96231b3b80d8
