Convert logical operations on general-purpose registers to the correspon-
ding operations on predicate registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242186 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change, personality directives were not emitted
if there was no invoke left in the function (of course until
recently this also meant that we couldn't know what
the personality actually was). This patch forces personality directives
to still be emitted, unless it is known to be a noop in the absence of
invokes, or the user explicitly specified `nounwind` (and not
`uwtable`) on the function.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D10884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242185 91177308-0d34-0410-b5e6-96231b3b80d8
We might not want to upgrade config.guess to the current
version due to the license change from GPL2 to GPL3.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242178 91177308-0d34-0410-b5e6-96231b3b80d8
This can be done only with moves which theoretically
will optimize better later.
Although this transform increases the instruction count,
it should be code size / cycle count neutral in the worst
VALU case. It also seems to slightly improve a couple
of testcases due to other DAG combines this exposes.
This is probably slightly worse for the SALU case, so
it might be better to handle this during moveToVALU,
although then you lose some simplifications like
the load width reducing in the simple testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242177 91177308-0d34-0410-b5e6-96231b3b80d8
If the read2 produced was supposed to be writing into a
super register, it would use the wrong subregister indices.
Fix this by inserting copies, so we only ever write to a vreg_64.
Run the register coalescer again to clean this up, although this
isn't ideal and often does result in an extra move.
Also remove the assert that offset1 > offset0.
There isn't a real reason to not allow this other than a minor
convenience in the compiler, and it doesn't seem worth the effort
of avoiding it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242174 91177308-0d34-0410-b5e6-96231b3b80d8
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242173 91177308-0d34-0410-b5e6-96231b3b80d8
Do not use MachineRegisterInfo::setPhysRegUsed()/isPhysRegUsed()
anymore. This bitset changes function-global state and is set by the
VirtRegRewriter anyway.
Simply use a bitvector private to RAGreedy.
Differential Revision: http://reviews.llvm.org/D10910
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242169 91177308-0d34-0410-b5e6-96231b3b80d8
The ones committed were orthogonal to the change and would have passed before
that revision. What it *did* do was prevent an assertion failure when
generating object files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242166 91177308-0d34-0410-b5e6-96231b3b80d8
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242165 91177308-0d34-0410-b5e6-96231b3b80d8
Generate extract instructions (via intrinsics) before the DAG combiner
folds shifts into unrecognizable forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242163 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 01446706b4.
Causes breakage, seems to be related to 'svn' in the file's name:
CC=gcc CXX=g++ \
../llvm/configure \
--prefix=/usr \
--sysconfdir=/etc \
--enable-shared \
--enable-libffi \
--enable-targets=all \
--disable-assertions \
--with-python=/usr/bin/python2 \
--enable-optimized
make REQUIRES_RTTI=1 ENABLE_PIC=1
results:
llvm[2]: Linking Release unit test Support (without symbols)
llvm[2]: ======= Finished Linking Release Unit test Support (without symbols)
make[3]: Entering directory '/build/llvm-svn/src/build/bindings/ocaml/llvm'
make[3]: *** No rule to make target '/build/llvm-
svn/src/build/Release/lib/ocaml/libLLVM-3.7.0svn.so', needed by 'build-
deplibs'. Stop.
make[3]: *** Waiting for unfinished jobs....
llvm[3]: Compiling llvm_ocaml.c for Release build
make[3]: Leaving directory '/build/llvm-svn/src/build/bindings/ocaml/llvm'
/build/llvm-svn/src/llvm/Makefile.rules:880: recipe for target 'all' failed
/build/llvm-svn/src/llvm/Makefile.rules:965: recipe for target 'all' failed
Differential Revision: http://reviews.llvm.org/D10716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242152 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- Signed 16-bit should have priority over unsigned.
- For la, unsigned 16-bit must use ori+addu rather than directly use ori.
- Correct tests on 32-bit immediates with 64-bit predicates by
sign-extending the immediate beforehand. For example, isInt<16>(0xffff8000)
should be true and use addiu.
Also split li/la testing into separate files due to their size.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10967
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242139 91177308-0d34-0410-b5e6-96231b3b80d8
Volatile loads and stores are made visible in global state regardless of
what memory is involved. It is not correct to disregard the ordering
and synchronization scope because it is possible to synchronize with
memory operations performed by hardware.
This partially addresses PR23737.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242126 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM_EXTERNAL_*_SOURCE_DIR is reset as PATH with set(CACHE PATH).
Then the CACHE PATH variable, LLVM_EXTERNAL_*_SOURCE_DIR, is normalized as
${CMAKE_SOURCE_DIR}/${path_var} if ${path_var} is relative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242120 91177308-0d34-0410-b5e6-96231b3b80d8
- Factor out code to query and modify the sign bit of a floatingpoint
value as an integer. This also works if none of the targets integer
types is big enough to hold all bits of the floatingpoint value.
- Legalize FABS(x) as FCOPYSIGN(x, 0.0) if FCOPYSIGN is available,
otherwise perform bit manipulation on the sign bit. The previous code
used "x >u 0 ? x : -x" which is incorrect for x being -0.0! It also
takes 34 instructions on ARM Cortex-M4. With this patch we only
require 5:
vldr d0, LCPI0_0
vmov r2, r3, d0
lsrs r2, r3, #31
bfi r1, r2, #31, #1
bx lr
(This could be further improved if the compiler would recognize that
r2, r3 is zero).
- Only lower FCOPYSIGN(x, y) = sign(x) ? -FABS(x) : FABS(x) if FABS is
available otherwise perform bit manipulation on the sign bit.
- Perform the sign(x) test by masking out the sign bit and comparing
with 0 rather than shifting the sign bit to the highest position and
testing for "<s 0". For x86 copysignl (on 80bit values) this gets us:
testl $32768, %eax
rather than:
shlq $48, %rax
sets %al
testb %al, %al
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242107 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The capability was lost with D10429 where the personality function was set at function level rather than landing pad level. Now there is no way to get/set the personality function from the C API. That is a problem.
Note that the whole thing could be avoided by improving the C API testing, as started by D10725
Reviewers: chandlerc, bogner, majnemer, andrew.w.kaylor, rafael, rnk, axw
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D10946
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242104 91177308-0d34-0410-b5e6-96231b3b80d8
add_llvm_external_project puts LLVM_EXTERNAL_${nameUPPER}_SOURCE_DIR into the cache even if it is just the in-tree default path. This causes all sorts of oddness, and makes it so that I can't change the behavior of this variable.
This patch never puts LLVM_EXTERNAL_${nameUPPER}_SOURCE_DIR into the cache. It will only end up in the cache if it is specified on the command line, which is the correct behavior.
There is also a temporary change to remove non-default values from the cache if they are already present. This should have the impact of cleaning out unncecissary values from the caches on the buildbots and people's local build directories. This part of the change is marked with a TODO and can be removed in a few days.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242102 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would refrain from attempting to increase the linkage of
available_externally globals because they were considered weak for the
linker. Now they are treated more like a declaration instead of a weak
definition.
This was causing SSE alignment faults in Chromuim, when some code
assumed it could increase the alignment of a dllimported global that it
didn't control. http://crbug.com/509256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242091 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the sub register indices from the register machine
operands.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242084 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows VSX swap optimization to succeed more frequently.
Specifically, it is concerned with common code sequences that occur
when copying a scalar floating-point value to a vector register. This
patch currently handles cases where the floating-point value is
already in a register, but does not yet handle loads (such as via an
LXSDX scalar floating-point VSX load). That will be dealt with later.
A typical case is when a scalar value comes in as a floating-point
parameter. The value is copied into a virtual VSFRC register, and
then a sequence of SUBREG_TO_REG and/or COPY operations will convert
it to a full vector register of the class required by the context. If
this vector register is then used as part of a lane-permuted
computation, the original scalar value will be in the wrong lane. We
can fix this by adding a swap operation following any widening
SUBREG_TO_REG operation. Additional COPY operations may be needed
around the swap operation in order to keep register assignment happy,
but these are pro forma operations that will be removed by coalescing.
If a scalar value is otherwise directly referenced in a computation
(such as by one of the many XS* vector-scalar operations), we
currently disable swap optimization. These operations are
lane-sensitive by definition. A MentionsPartialVR flag is added for
use in each swap table entry that mentions a scalar floating-point
register without having special handling defined.
A common idiom for PPC64LE is to convert a double-precision scalar to
a vector by performing a splat operation. This ensures that the value
can be referenced as V[0], as it would be for big endian, whereas just
converting the scalar to a vector with a SUBREG_TO_REG operation
leaves this value only in V[1]. A doubleword splat operation is one
form of an XXPERMDI instruction, which takes one doubleword from a
first operand and another doubleword from a second operand, with a
two-bit selector operand indicating which doublewords are chosen. In
the general case, an XXPERMDI can be permitted in a lane-swapped
region provided that it is properly transformed to select the
corresponding swapped values. This transformation is to reverse the
order of the two input operands, and to reverse and complement the
bits of the selector operand (derivation left as an exercise to the
reader ;).
A new test case that exercises the scalar-to-vector and generalized
XXPERMDI transformations is added as CodeGen/PowerPC/swaps-le-5.ll.
The patch also requires a change to CodeGen/PowerPC/swaps-le-3.ll to
use CHECK-DAG instead of CHECK for two independent instructions that
now appear in reverse order.
There are two small unrelated changes that are added with this patch.
First, the XXSLDWI instruction was incorrectly omitted from the list
of lane-sensitive instructions; this is now fixed. Second, I observed
that the same webs were being rejected over and over again for
different reasons. Since it's sufficient to reject a web only once, I
added a check for this to speed up the compilation time slightly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242081 91177308-0d34-0410-b5e6-96231b3b80d8
This test case was breaking the hexagon elf bot. The failing lines
were actually unnecessary as checking that the store still reads the
correct value demonstrates that everything is working fine now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242073 91177308-0d34-0410-b5e6-96231b3b80d8
