llvm-6502/test/CodeGen/R600
Matt Arsenault 94437c9691 Use right address space pointer size
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194940 91177308-0d34-0410-b5e6-96231b3b80d8
2013-11-17 00:06:39 +00:00
..
32-bit-local-address-space.ll Use right address space pointer size 2013-11-17 00:06:39 +00:00
64bit-kernel-args.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
128bit-kernel-args.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
add.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
address-space.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
and.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
array-ptr-calc-i64.ll R600/SI: Add test that fails due to requiring i64 mul for pointers 2013-11-11 23:31:02 +00:00
atomic_load_add.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
atomic_load_sub.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
bfe_uint.ll R600: Remove AMDILPeeopholeOptimizer and replace optimizations with tablegen patterns 2013-05-10 02:09:45 +00:00
bfi_int.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
big_alu.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
bitcast.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
build_vector.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
call_fs.ll R600: Add a test for r183108 2013-06-04 15:03:35 +00:00
cf_end.ll R600: Stop emitting the instruction type byte before each instruction 2013-05-06 17:50:44 +00:00
combine_vloads.ll Add target hook to prevent folding some bitcasted loads. 2013-11-15 04:42:23 +00:00
complex-folding.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
dagcombiner-bug-illegal-vec4-int-to-fp.ll R600: Prettier asmPrint of Alu 2013-05-02 21:52:30 +00:00
disconnected-predset-break-bug.ll R600: use native for alu 2013-04-30 00:14:38 +00:00
dot4-folding.ll R600: Const/Neg/Abs can be folded to dot4 2013-06-04 23:17:15 +00:00
elf.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
elf.r600.ll R600: Emit config values in register / value pairs 2013-05-06 17:50:51 +00:00
extload.ll R600: Fix selection failure on EXTLOAD 2013-11-13 02:39:07 +00:00
fabs.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fadd64.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fadd.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
fcmp64.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fcmp-cnd.ll R600: Non vector only instruction can be scheduled on trans unit 2013-09-04 19:53:46 +00:00
fcmp-cnde-int-args.ll R600: Improve custom lowering of select_cc 2013-03-08 15:37:09 +00:00
fcmp.ll R600: Non vector only instruction can be scheduled on trans unit 2013-09-04 19:53:46 +00:00
fconst64.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fdiv64.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fdiv.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
fetch-limits.r600.ll R600: Fix the fetch limits for R600 generation GPUs 2013-06-07 20:28:55 +00:00
fetch-limits.r700+.ll R600: Fix the fetch limits for R600 generation GPUs 2013-06-07 20:28:55 +00:00
floor.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
fma.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fmad.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
fmax.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
fmin.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
fmul64.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fmul.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
fmuladd.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fneg.ll R600/SI: Prefer SALU instructions for bit shift operations 2013-11-13 23:36:37 +00:00
fp64_to_sint.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
fp_to_sint.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
fp_to_uint.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
fpext.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
fptrunc.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
fsqrt.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fsub64.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
fsub.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
gep-address-space.ll Fix CodeGen for vectors of pointers with address spaces. 2013-10-21 20:03:58 +00:00
i8-to-double-to-float.ll R600: Use KCache for kernel arguments 2013-07-23 01:48:18 +00:00
icmp-select-sete-reverse-args.ll R600: Non vector only instruction can be scheduled on trans unit 2013-09-04 19:53:46 +00:00
imm.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
indirect-addressing-si.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
insert_vector_elt.ll Add some xfaild R600 tests. 2013-10-08 18:06:36 +00:00
jump-address.ll R600: add a pass that merges clauses. 2013-10-01 19:32:58 +00:00
kcache-fold.ll R600: Fix handling of NAN in comparison instructions 2013-09-28 02:50:50 +00:00
kernel-args.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
lds-output-queue.ll R600: Fix scheduling of instructions that use the LDS output queue 2013-11-15 00:12:45 +00:00
lds-size.ll R600: Fix incorrect LDS size calculation 2013-09-05 18:37:57 +00:00
legalizedag-bug-expand-setcc.ll LegalizeDAG: Respect the result of TLI.getBooleanContents() when expanding SETCC 2013-03-08 15:37:02 +00:00
lit.local.cfg [tests] Cleanup initialization of test suffixes. 2013-08-16 00:37:11 +00:00
literals.ll R600: Move code handling literal folding into R600ISelLowering. 2013-09-12 23:44:53 +00:00
llvm.AMDGPU.barrier.local.ll R600: Add support for GROUP_BARRIER instruction 2013-06-28 15:46:59 +00:00
llvm.AMDGPU.cube.ll R600: Use new getNamedOperandIdx function generated by TableGen 2013-06-25 21:22:18 +00:00
llvm.AMDGPU.imax.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.AMDGPU.imin.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.AMDGPU.mul.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
llvm.AMDGPU.tex.ll R600: Swizzle texture/export instructions 2013-06-04 15:04:53 +00:00
llvm.AMDGPU.trunc.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.AMDGPU.umax.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.AMDGPU.umin.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.cos.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
llvm.floor.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.pow.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
llvm.rint.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.SI.fs.interp.constant.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.SI.imageload.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
llvm.SI.resinfo.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
llvm.SI.sample-masked.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
llvm.SI.sample.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
llvm.SI.sampled.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
llvm.SI.tbuffer.store.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
llvm.SI.tid.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
llvm.sin.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
llvm.sqrt.ll R600: Expand vector FSQRT ops 2013-10-29 16:37:20 +00:00
load64.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
load-input-fold.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
load.ll R600/SI: Add support for private address space load/store 2013-11-13 23:36:50 +00:00
load.vec.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
local-memory-two-objects.ll R600: Fix scheduling of instructions that use the LDS output queue 2013-11-15 00:12:45 +00:00
local-memory.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
loop-address.ll R600: add a pass that merges clauses. 2013-10-01 19:32:58 +00:00
lshl.ll R600/SI: Prefer SALU instructions for bit shift operations 2013-11-13 23:36:37 +00:00
lshr.ll R600/SI: Prefer SALU instructions for bit shift operations 2013-11-13 23:36:37 +00:00
mad_int24.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
mad_uint24.ll R600/SI: Prefer SALU instructions for bit shift operations 2013-11-13 23:36:37 +00:00
max-literals.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
mul_int24.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
mul_uint24.ll R600/SI: Prefer SALU instructions for bit shift operations 2013-11-13 23:36:37 +00:00
mul.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
mulhu.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
or.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
packetizer.ll R600: Fix typo in R600Schedule.td 2013-06-25 02:39:20 +00:00
parallelandifcollapse.ll Factor FlattenCFG out from SimplifyCFG 2013-08-06 02:43:45 +00:00
parallelorifcollapse.ll Factor FlattenCFG out from SimplifyCFG 2013-08-06 02:43:45 +00:00
predicate-dp4.ll R600: Make dot_4 instructions predicable 2013-11-16 16:24:41 +00:00
predicates.ll R600: Prettier asmPrint of Alu 2013-05-02 21:52:30 +00:00
private-memory.ll R600/SI: Add support for private address space load/store 2013-11-13 23:36:50 +00:00
pv-packing.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
pv.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
r600-encoding.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
r600-export-fix.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
r600cfg.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
README R600: Reorganize lit tests and document how they should be organized 2013-04-19 02:10:53 +00:00
reciprocal.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
rotr.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
rv7x0_count3.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
schedule-fs-loop-nested-if.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
schedule-fs-loop-nested.ll R600: Enable -verify-machineinstrs in some tests. 2013-10-01 19:32:38 +00:00
schedule-fs-loop.ll R600: Enable -verify-machineinstrs in some tests. 2013-10-01 19:32:38 +00:00
schedule-if-2.ll R600: Enable -verify-machineinstrs in some tests. 2013-10-01 19:32:38 +00:00
schedule-if.ll R600: Enable -verify-machineinstrs in some tests. 2013-10-01 19:32:38 +00:00
schedule-vs-if-nested-loop.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
sdiv.ll R600: Add CF_END 2013-04-23 17:34:00 +00:00
select.ll R600: Expand SELECT nodes rather than custom lowering them 2013-09-05 18:38:03 +00:00
selectcc-cnd.ll R600: Non vector only instruction can be scheduled on trans unit 2013-09-04 19:53:46 +00:00
selectcc-cnde-int.ll R600: Non vector only instruction can be scheduled on trans unit 2013-09-04 19:53:46 +00:00
selectcc-icmp-select-float.ll R600: Prettier asmPrint of Alu 2013-05-02 21:52:30 +00:00
selectcc-opt.ll R600: add a pass that merges clauses. 2013-10-01 19:32:58 +00:00
set-dx10.ll R600: Fix handling of NAN in comparison instructions 2013-09-28 02:50:50 +00:00
setcc.ll R600: Set scheduling preference to Sched::Source 2013-08-12 22:33:21 +00:00
seto.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
setuo.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
sgpr-copy-duplicate-operand.ll R600/SI: Add testcase for problem I ran into 2013-11-14 07:57:29 +00:00
sgpr-copy.ll R600/SI: Add VReg_96 register class to SIRegisterInfo::hasVGPRs() 2013-11-15 18:26:45 +00:00
shared-op-cycle.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
shl.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
si-annotate-cf-assertion.ll Add some xfaild R600 tests. 2013-10-08 18:06:36 +00:00
si-lod-bias.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
si-vector-hang.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
sign_extend.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
sint_to_fp64.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
sint_to_fp.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
sra.ll R600/SI: Add support for private address space load/store 2013-11-13 23:36:50 +00:00
srl.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
store-vector-ptrs.ll Add some xfaild R600 tests. 2013-10-08 18:06:36 +00:00
store.ll R600: Fix handling of vector kernel arguments 2013-10-23 00:44:32 +00:00
store.r600.ll R600: Change the RAT instruction assembly names so they match the docs 2013-08-16 01:11:46 +00:00
structurize.ll R600: Fix a crash in the AMDILCFGStructurizer 2013-10-16 17:06:02 +00:00
sub.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
swizzle-export.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
tex-clause-antidep.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
texture-input-merge.ll R600: Use function inputs to represent data stored in gpr 2013-11-11 22:10:24 +00:00
trunc-vector-store-assertion-failure.ll SelectionDAG: Make sure stores are always added to the LegalizedNodes list 2013-08-21 22:42:58 +00:00
trunc.ll R600/SI: Prefer SALU instructions for bit shift operations 2013-11-13 23:36:37 +00:00
udiv.ll R600: Fix LowerUDIVREM 2013-11-06 17:36:04 +00:00
uint_to_fp.ll R600: Custom lower f32 = uint_to_fp i64 2013-10-30 17:22:05 +00:00
unaligned-load-store.ll R600/SI: Add support for private address space load/store 2013-11-13 23:36:50 +00:00
unsupported-cc.ll R600: Fix handling of NAN in comparison instructions 2013-09-28 02:50:50 +00:00
urecip.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
urem.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
vertex-fetch-encoding.ll R600: Add support for v4i32 stores on Cayman 2013-08-16 01:12:00 +00:00
vselect.ll R600/SI: Use -verify-machineinstrs for most tests 2013-10-10 17:11:46 +00:00
vtx-schedule.ll R600: Use KCache for kernel arguments 2013-07-23 01:48:18 +00:00
wait.ll R600: improve dump of S_WAITCNT 2013-10-13 17:56:28 +00:00
work-item-intrinsics.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
wrong-transalu-pos-fix.ll TBAA: remove !tbaa from testing cases when they are not needed. 2013-09-30 18:17:35 +00:00
xor.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00
zero_extend.ll R600/SI: Change formatting of printed registers. 2013-11-12 02:35:51 +00:00

+==============================================================================+
| How to organize the lit tests                                                |
+==============================================================================+

- If you write a test for matching a single DAG opcode or intrinsic, it should
  go in a file called {opcode_name,intrinsic_name}.ll (e.g. fadd.ll)

- If you write a test that matches several DAG opcodes and checks for a single
  ISA instruction, then that test should go in a file called {ISA_name}.ll (e.g.
  bfi_int.ll

- For all other tests, use your best judgement for organizing tests and naming
  the files.

+==============================================================================+
| Naming conventions                                                           |
+==============================================================================+

- Use dash '-' and not underscore '_' to separate words in file names, unless
  the file is named after a DAG opcode or ISA instruction that has an
  underscore '_' in its name.