3e22ca4e6f
Removing obsolete files.
2013-12-20 21:57:03 +10:00
c8389e5ff7
Read performance improvements
...
- More than 2x improvement in read performance, to 930KB/sec
- Added compatibility for the Keil ARM compiler. Provides an
additional 1.5% performance improvement.
2013-12-20 21:54:41 +10:00
b50aad09c8
Reliability improvements for SD init and reads.
2013-12-09 22:00:49 +10:00
a835e7a1d3
Added MODE SELECT stub to enable Apple HD SC Setup formatting. Thanks dougg3!.
2013-12-09 12:16:24 +10:00
890106c806
Fix typo in scsi2sd-config Makefile for building on Mac OSX
2013-10-30 09:13:55 +10:00
7193c6f29b
Added the scsi2sd-config utility, and updated firmware to suit.
2013-10-29 21:48:07 +10:00
ed1dff172e
Added Windows support for the bootloaderhost utility
...
Compile on Linux using the mingw cross compiler.
2013-10-28 21:08:29 +10:00
32a39b08be
Added Mac OSX support for the bootloaderhost utility (not tested)
2013-10-27 21:35:25 +10:00
2db48d9211
The bootloaderhost utility is now working under Linux.
2013-10-27 21:10:54 +10:00
c693c7fac1
Updated firmware for PCB Revision 3.0
...
- A USB Bootloader is now used. Use either the bootloader host supplied
with PSoC Creator 3.0, or else the standalone app included with
Cypress AN73503. You have 2 seconds between connecting the USB cable
and hitting the "program" button.
- The bootloaderhost program included in this repository doesn't quite
work yet. When functional it should simplify firmware updates on Linux
and Mac OSX
- Fixed an error in the parts spreadsheet which had a 22k resistor for
USB termination instead of a 22 Ohm resistor.
- Updated parts spreadsheet with part number of PSoC actually used
(CY8C5267AXI-LP051).
2013-10-27 00:21:42 +10:00
b4667837de
Modified PSoC Creator project file to use relative paths
2013-10-25 06:59:59 +10:00
ad91a39f77
Implemented multi-sector SD read command.
2013-10-20 19:50:47 +10:00
b9ed365266
SCSI data read/write implemented using the PSoC datapath
...
Moved some configuration parameters into EEPROM
2013-10-20 18:27:57 +10:00
cc6921e4ce
Write performance improvements.
...
- Multi-sector SD card writes supported.
- Updated to PSoC Creator 3.0
2013-10-14 22:24:04 +10:00
27e482ea8c
Multi-sector writes, increased SPI clock to 24MHz, Added support for SDHC/SDXC.
2013-10-12 00:37:27 +10:00
aa5e83b9db
Added support for standard ARM JTAG programmers, as well
...
as continuing miniprog3 SWD support.
2013-10-09 23:02:19 +10:00
eab29b68b5
Exporting schematic and pcb layout to PDF
2013-10-09 21:03:21 +10:00
090977f295
Updating readme to match wiki
2013-10-09 14:07:28 +10:00
460a2826e6
Modified gerbers to suit www.smart-prototyping.com naming conventions.
2013-10-09 14:03:24 +10:00
31edbe3fc2
Adding STATUS file to indicate the pcb doesn't match the software
2013-10-03 10:20:19 +10:00
75de12268f
Creating new repository to prune history.
2013-10-03 07:07:58 +10:00
Michael McMaster