63ef5824b1
Fix crash when SD card is smaller than starting sector of scsi disk
2017-04-29 14:39:33 +10:00
124ccf1d64
Fix input of size fieds and CDROM sector length in scsi2sd-util
2017-04-24 21:21:43 +10:00
6e10264827
Adding vendor specific (OMTI) commands
2017-03-12 14:16:00 +10:00
c75fbc8e6e
V4.7 release fixes
2017-03-12 14:15:05 +10:00
ecdf21796a
More custom mode page fixes - fall-through to standard pages if not found
2016-08-01 19:33:03 +10:00
8dc9a838f5
Allow custom VPD pages
2016-01-19 20:27:31 +10:00
760222798c
Support custom mode pages
2016-01-13 21:22:16 +10:00
2be1bfb906
v4.6 release
2016-01-11 21:14:05 +10:00
ff3ca448a5
Lots of bug fixes.
...
- Reset fix
- Overrun fifo on fast scsi host fix
- Startup time improvement
- Allows overwriting the bootloader
- Adds "sticky" sel option
- Adds map luns to id option
2016-01-07 22:15:45 +10:00
5418ee6229
Fix for using scsi2sd-util on Windows 10.
2015-12-07 19:59:25 +10:00
0b44126260
Fixed linking erro on Ubuntu 15.10
...
Signed-off-by: Michael McMaster <michael@codesrc.com>
2015-11-14 09:32:26 +10:00
e13a6e2678
Final tweaks for v4.5
2015-11-05 21:43:36 +10:00
0b558479a6
Compile fixes
2015-11-01 20:30:53 +10:00
56f1d31703
Bug fixes galore! Added lots more settings, and moved them into another config tab
...
- wxWidgets upgrade to 3.02
- PSoC Creator upgrade to 3.3
2015-10-30 13:43:44 +10:00
0c1e0071de
CDROM: allow to boot from MacOS 7.6 CDROM
...
Reading one sector from the CDROM is always reading several (4)
from the SD card, so always set multBlock to one in this case.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2015-09-25 00:45:58 +02:00
ceb8d24303
Add DB25 adapter hardware design, plus other minor fixes
2015-09-23 20:23:45 +10:00
6d5c68d676
SCSI2SD: correctly manage media type
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2015-09-22 23:39:49 +02:00
ec0058772c
Move log dump to a function
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2015-09-22 10:52:33 +02:00
dcb5ee0056
Add a .spec to create scsi2sd-util RPM
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2015-09-20 01:43:17 +02:00
748d52b1c8
Add dist and install targets
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2015-09-20 01:43:16 +02:00
9ac16657e5
Add USE_SYSTEM makefile variable to use system libraries
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2015-09-20 01:42:48 +02:00
4f14ac665a
compile fixups
2015-09-06 15:31:30 +10:00
c9096e9725
Merge branch 'master' of ssh://webhost.codesrc.com/home/michael/projects/SCSI2SD
2015-09-06 15:17:23 +10:00
6a7207c092
Initial tape and magneto-optical support
2015-09-06 15:15:41 +10:00
55beeb5bd3
Glitch filter configuration options and update to PSoC Creator v3.2
2015-08-13 18:06:19 +10:00
9f5624ddd7
Performance fixes, scsi2sd-util crash fixes, scsi2 config option.
2015-07-21 10:55:08 +10:00
446892cde0
scsi2sd-util crash on exit fix (again)
2015-06-14 18:57:28 +10:00
94cc9e77bc
Adding configurable geometry support to firmware.
...
Fix for scsi2sd-util crashes on exit.
2015-06-12 09:44:34 +10:00
6c7ac0966f
EMU EMAX 1/2 fixes.
...
Additional delays for SCSI1 hosts to improve compatibility with slow SCSI
controllers
Slight performance improvement for SCSI2 hosts (500us per command)
Config settings may now be saved/loaded via XML files in scsi2sd-util.
2015-06-10 14:57:13 +10:00
ee846f4226
Add missing SWV trace functions.
2015-05-05 20:15:22 +10:00
e309282563
Hardcode a default config, which is written to flash on first boot.
...
The bootloader fails checksums if the config is defined within a
code section, then later modified.
Hacking the .hex file isn't possible either because PSoC Programmer
checks that the non-bootloadable part of the flash is empty.
2015-05-04 23:51:11 +10:00
84112d50dc
Clean up version number mishap (4.2.3 reported as 4.2.2)
...
Reduce size of mode pages for SCSI1 hosts
Stability improvements whan handling resets during SCSI reads.
2015-05-04 21:38:14 +10:00
dd079ff2be
Supply dummy trace.h to get the code to compile.
2015-05-04 21:03:05 +10:00
0cf125fc05
SWV tracing for diagnosing hangs.
...
Patch provided by James Laird-Wah <james@laird-wah.net>
2015-05-04 20:39:25 +10:00
35d88b4d1f
Add tool to allow manual hacking of .hex firmware files
2015-05-04 20:21:28 +10:00
cb79ac4e9a
Reduce size of mode pages for SCSI1 hosts
2015-05-04 20:20:53 +10:00
1b14acad1a
Removed default config from flash.
...
The bootloader checksum check fails if the configuration is changed.
2015-04-26 08:10:09 +10:00
9ad7cc15d0
Small compatibility improvements, and added scsi2sd-monitor test program
2015-04-20 16:09:51 +10:00
95b519789b
Implement WRITE BUFFER and WRITE WITH VERIFY commands
...
Also fixes a problem with SD card initialisation not setting
the clock back to normal on an error condition. The next
initialisation attempt ends up running the card at a very slow
rate.
2015-02-20 16:56:27 +10:00
5446dc86ba
Support VMS 5.5_2 mode page bits.
2015-02-01 19:13:33 +10:00
70257ca867
SD card interface rewrite to improve compatibility with some SD cards.
...
- Fixed write problems with Samsung SD card controllers
- Added workaround to prevent timeouts on slow writes.
- Upgrade to PSoC Creator 3.1 and gcc 4.8.4
2015-02-01 13:42:01 +10:00
64fed3d6b1
Change default configuration to 2GB limit, no parity, no attention.
2015-01-08 20:54:27 +10:00
49c9b7d734
Fix SD hotswap when using long microSD to SD cables.
2014-12-23 21:15:52 +10:00
0a83042b0d
Merge branch 'scsi2sd-util'
2014-12-23 09:25:55 +10:00
638c94ce5c
scsi2sd-util bug fixes and hot swap support.
2014-12-23 09:22:01 +10:00
1108cdc899
Preparing for pick-and-place assembly (xy file)
2014-12-09 20:31:11 +10:00
b19a0a4c7c
Emulation of multiple SCSI targets now working.
...
The CDROM device support has a few bugs, as does scsi2sd-util
2014-12-05 13:17:06 +10:00
2354021f55
Merge scsi2sd-util GUI changes
...
Conflicts:
software/SCSI2SD/src/config.c
software/SCSI2SD/src/disk.c
software/SCSI2SD/src/scsi.c
software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfitter.h
software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfitter_cfg.c
software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfittergnu.inc
software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfitteriar.inc
software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfitterrv.inc
software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoC5/project.h
software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cycdx
software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyfit
software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyprj
software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.svd
software/SCSI2SD/v3/SCSI2SD.cydsn/TopDesign/TopDesign.cysch
software/SCSI2SD/v3/SCSI2SD.cydsn/scsiTarget/scsiTarget.v
software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfitter.h
software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfitter_cfg.c
software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfittergnu.inc
software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfitteriar.inc
software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoC5/cyfitterrv.inc
software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoC5/project.h
software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml
software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cycdx
software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyfit
software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyprj
software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.svd
software/SCSI2SD/v4/SCSI2SD.cydsn/TopDesign/TopDesign.cysch
2014-11-28 13:47:49 +00:00
75f825e6d5
Initial scsi2sd-util GUI tool.
...
Firmware upgrade and config save/load mostly works.
Firmware isn't making use of the new configuration yet.
2014-11-28 16:54:42 +10:00
762b96f77b
Update 3.5" board revision to 4.2c.
...
Added bulk capacitance to help resolve SD card write issues.
2014-11-25 19:40:23 +10:00
Michael McMaster
Norman Schleicher
Laurent Vivier