5 Operation Modes

demik edited this page 2024-06-06 18:34:35 +02:00

Table of Contents

• Configuration matrix
• Notes

The Quack converter can be used in multiple conversions modes:

• ADB to Quadrature
• Bluetooth to Quadrature
• ADB to Bluetooth LE (experimental, currently only working in Windows 10 up to firmware v 1.4.4)

There is a set of user friendly DIP switches on the board which will allow you to choose the correct mode.

• DIP1 is "ADB Host"
• DIP2 is "Bluetooth Disable"
• DIP3 is "Flash"

Configuration matrix

DIP1	DIP2	DIP3	Mode
OFF	OFF	OFF	Bluetooth to Quadrature
ON	OFF	OFF	ADB to Bluetooth
ON	ON	OFF	ADB to Quadrature
*	*	ON	Flash mode

Notes

• in all modes, the quadrature output is working
• the ADB port is providing power in Bluetooth to Quadrature mode, but the input is ignored

• Home
• Getting Started
  • Operation Modes
  • Supported ADB Mouses
  • Supported Bluetooth Mouses
  • Supported Wii Remotes
• Troubleshooting
• Advanced
  • Building your own
  • Debugging with UART
  • Flashing
  • External Power Cable
• Project thread @ 68kmla
• Project thread @ tinkerdifferent