dingusppc/devices/common/pci/pcidevice.h

249 lines
8.8 KiB
C
Raw Normal View History

/*
DingusPPC - The Experimental PowerPC Macintosh emulator
2023-02-04 16:57:46 +00:00
Copyright (C) 2018-23 divingkatae and maximum
(theweirdo) spatium
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
#ifndef PCI_DEVICE_H
#define PCI_DEVICE_H
#include <devices/common/mmiodevice.h>
#include <devices/common/pci/pcihost.h>
2020-05-12 18:55:45 +00:00
#include <cinttypes>
#include <functional>
#include <memory>
2020-05-12 18:55:45 +00:00
#include <string>
2023-02-04 16:57:46 +00:00
#include <vector>
2020-03-31 19:12:06 +00:00
/** PCI configuration space registers offsets */
enum {
PCI_CFG_DEV_ID = 0x00, // device and vendor IDs
PCI_CFG_STAT_CMD = 0x04, // command/status register
PCI_CFG_CLASS_REV = 0x08, // class code and revision ID
PCI_CFG_DWORD_3 = 0x0C, // BIST, HeaderType, Lat_Timer and Cache_Line_Size
PCI_CFG_BAR0 = 0x10, // base address register 0
PCI_CFG_BAR1 = 0x14, // base address register 1
PCI_CFG_BAR2 = 0x18, // base address register 2
PCI_CFG_BAR3 = 0x1C, // base address register 3
PCI_CFG_BAR4 = 0x20, // base address register 4
PCI_CFG_BAR5 = 0x24, // base address register 5
PCI_CFG_CIS_PTR = 0x28, // Cardbus CIS Pointer
PCI_CFG_SUBSYS_ID = 0x2C, // Subsysten IDs
PCI_CFG_ROM_BAR = 0x30, // expansion ROM base address
PCI_CFG_CAP_PTR = 0x34, // capabilities pointer
PCI_CFG_DWORD_14 = 0x38, // reserved
PCI_CFG_DWORD_15 = 0x3C, // Max_Lat, Min_Gnt, Int_Pin and Int_Line registers
};
/** PCI Vendor IDs for devices used in Power Macintosh computers. */
enum {
PCI_VENDOR_ATI = 0x1002,
PCI_VENDOR_DEC = 0x1011,
PCI_VENDOR_MOTOROLA = 0x1057,
PCI_VENDOR_APPLE = 0x106B,
PCI_VENDOR_NVIDIA = 0x10DE,
};
/** PCI BAR types */
2023-02-04 16:57:46 +00:00
enum PCIBarType : uint32_t {
Unused = 0,
Io_16_Bit,
Io_32_Bit,
Mem_20_Bit, // legacy type for < 1MB memory
Mem_32_Bit,
Mem_64_Bit_Lo,
Mem_64_Bit_Hi
};
2023-02-04 16:57:46 +00:00
typedef struct {
uint32_t bar_num;
uint32_t bar_cfg;
} BarConfig;
class PCIDevice : public MMIODevice {
public:
PCIDevice(std::string name);
virtual ~PCIDevice() = default;
virtual bool supports_io_space() {
return has_io_space;
};
2020-03-31 19:12:06 +00:00
/* I/O space access methods */
2020-05-12 18:55:45 +00:00
virtual bool pci_io_read(uint32_t offset, uint32_t size, uint32_t* res) {
return false;
};
2020-03-31 19:12:06 +00:00
2020-05-12 18:55:45 +00:00
virtual bool pci_io_write(uint32_t offset, uint32_t value, uint32_t size) {
return false;
};
2020-03-31 19:12:06 +00:00
// configuration space access methods
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
virtual uint32_t pci_cfg_read(uint32_t reg_offs, AccessDetails &details);
virtual void pci_cfg_write(uint32_t reg_offs, uint32_t value, AccessDetails &details);
// plugin interface for using in the derived classes
std::function<uint16_t()> pci_rd_stat;
std::function<void(uint16_t)> pci_wr_stat;
std::function<uint16_t()> pci_rd_cmd;
std::function<void(uint16_t)> pci_wr_cmd;
std::function<uint8_t()> pci_rd_bist;
std::function<void(uint8_t)> pci_wr_bist;
std::function<uint8_t()> pci_rd_lat_timer;
std::function<void(uint8_t)> pci_wr_lat_timer;
std::function<uint8_t()> pci_rd_cache_lnsz;
std::function<void(uint8_t)> pci_wr_cache_lnsz;
std::function<void(int)> pci_notify_bar_change;
int attach_exp_rom_image(const std::string img_path);
2020-05-12 18:55:45 +00:00
virtual void set_host(PCIHost* host_instance) {
this->host_instance = host_instance;
};
Add PCI bridge and multi-function device support. Add PCI bridge and multi-function device support. Overview: - A multi-function device is two or more PCIDevices with the same device number but one device is function zero (as with currently implemented PCIDevices) and the other functions have function numbers between 1 and 7. The device number and function number are properties of the PCIDevice's parent PCIHost connection. - A PCIBridge is a PCIHost (it can connect child PCI devices) and a PCIDevice (it has config space, BARs, and expansion ROM). - A PCIDevice has Type 0 header. It has 6 BARs. - A PCIBridge has Type 1 header. It has 2 BARs. The config space registers beginning from offset 0x18 differ from those of a PCIDevice. Possible future modifications: - Add a PCICardBus class. It is a PCIHost. It has Type 2 header. It has one BAR. The first 20 bytes match Type 0 and Type 1 headers. These exist in New World Macs. They allow hot-plug of PCI devices. - Split base PCI registers (first 16 bytes) into a PCIBase class. Type 1 and 2 have two or one BAR but I think all 6 BARs belong in PCIBase class anyway. - Split PCIHost into two classes: Currently existing PCIHosts (Bandit, Grackle) are PCIHost and PCIRoot (they have the broadcast I/O requests functionality) while PCIBridge is PCIHost only - it can propagate I/O requests but does not originate the broadcast. - pci_register_mmio_region should maybe return a pointer to a region struct so that it can be used for unregistering or modifying the region's range. This may be useful for PCI bridges which have ranges that may constrain memory BARs of their downstream devices. PCIDevice - Moved expansion ROM BAR handling to a separate function pci_wr_exp_rom_bar so that it can be used by both PCI devices and PCI bridges which have the ROM BAR in different locations. It now supports unmapping expansion ROM. Also made exp_rom_bar not writable if there's no ROM. - Added num_bars field which specifies the number of valid BARs since Type 0, 1, and 2 headers have different number of BARs. - map_exp_rom_mem now properly unmaps expansion ROM (using new function unmap_exp_rom_mem) before mapping it again. - Added function set_multi_function which modifies hdr_type to indicate if a device has other functions. This is to be applied only to devices with function number 0. PCIHost - When attaching a PCI device, it will check if it's a multi-function device (there exists an attached function that is not zero) and adjust hdr_type of function 0 of the device accordingly. - Attached PCI bridges are added to a list of PCI bridges attached to the host. - Added pci_io_read_loop and pci_io_write_loop which loop through attached PCI devices to find one that will perform the action for the given I/O address without logging an error (since some other device might perform the action). - Added pci_io_read_broadcast and pci_io_write_broadcast which are used by a PCI root (bandit/grackle). They will log an error if the action is not performed. They should probably do a machine check exception to match real Power Macs. - pci_find_device (used by PCI root) will recursively find a PCIDevice for type 1 config register accesses. - Logging from PCIHost now includes the name of the PCIHost instead of just "PCIHost" because there can be multiple PCI hosts. PCIBridge - Sets num_bars to 2 and hdr_type to 1. - I/O ranges set in the config registers are handled correctly by pci_io_read and pci_io_write. - Memory ranges set in the config registers do not currently affect memory mmio regions. It is assumed that Open Firmware and the OS will set the ranges and BARs correctly to allow all BARs to be accessed fully. bandit, mpc106 - Bandit and Grackle now call pci_io_read_broadcast and pci_io_read_broadcast to pass I/O accesses to downstream PCI devices. - Chaos is modified to work like Bandit even though it will never have PCI bridges attached or devices that support I/O accesses. It's simpler this way.
2022-10-26 06:06:12 +00:00
virtual void set_multi_function(bool is_multi_function) {
this->hdr_type = is_multi_function ? (this->hdr_type | 0x80) : (this->hdr_type & 0x7f);
}
virtual void set_irq_pin(uint8_t irq_pin) {
this->irq_pin = irq_pin;
}
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
// MMIODevice methods
virtual uint32_t read(uint32_t rgn_start, uint32_t offset, int size) { return 0; }
virtual void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size) { }
protected:
void set_bar_value(int bar_num, uint32_t value);
2023-02-04 16:57:46 +00:00
void setup_bars(std::vector<BarConfig> cfg_data);
void finish_config_bars();
Add PCI bridge and multi-function device support. Add PCI bridge and multi-function device support. Overview: - A multi-function device is two or more PCIDevices with the same device number but one device is function zero (as with currently implemented PCIDevices) and the other functions have function numbers between 1 and 7. The device number and function number are properties of the PCIDevice's parent PCIHost connection. - A PCIBridge is a PCIHost (it can connect child PCI devices) and a PCIDevice (it has config space, BARs, and expansion ROM). - A PCIDevice has Type 0 header. It has 6 BARs. - A PCIBridge has Type 1 header. It has 2 BARs. The config space registers beginning from offset 0x18 differ from those of a PCIDevice. Possible future modifications: - Add a PCICardBus class. It is a PCIHost. It has Type 2 header. It has one BAR. The first 20 bytes match Type 0 and Type 1 headers. These exist in New World Macs. They allow hot-plug of PCI devices. - Split base PCI registers (first 16 bytes) into a PCIBase class. Type 1 and 2 have two or one BAR but I think all 6 BARs belong in PCIBase class anyway. - Split PCIHost into two classes: Currently existing PCIHosts (Bandit, Grackle) are PCIHost and PCIRoot (they have the broadcast I/O requests functionality) while PCIBridge is PCIHost only - it can propagate I/O requests but does not originate the broadcast. - pci_register_mmio_region should maybe return a pointer to a region struct so that it can be used for unregistering or modifying the region's range. This may be useful for PCI bridges which have ranges that may constrain memory BARs of their downstream devices. PCIDevice - Moved expansion ROM BAR handling to a separate function pci_wr_exp_rom_bar so that it can be used by both PCI devices and PCI bridges which have the ROM BAR in different locations. It now supports unmapping expansion ROM. Also made exp_rom_bar not writable if there's no ROM. - Added num_bars field which specifies the number of valid BARs since Type 0, 1, and 2 headers have different number of BARs. - map_exp_rom_mem now properly unmaps expansion ROM (using new function unmap_exp_rom_mem) before mapping it again. - Added function set_multi_function which modifies hdr_type to indicate if a device has other functions. This is to be applied only to devices with function number 0. PCIHost - When attaching a PCI device, it will check if it's a multi-function device (there exists an attached function that is not zero) and adjust hdr_type of function 0 of the device accordingly. - Attached PCI bridges are added to a list of PCI bridges attached to the host. - Added pci_io_read_loop and pci_io_write_loop which loop through attached PCI devices to find one that will perform the action for the given I/O address without logging an error (since some other device might perform the action). - Added pci_io_read_broadcast and pci_io_write_broadcast which are used by a PCI root (bandit/grackle). They will log an error if the action is not performed. They should probably do a machine check exception to match real Power Macs. - pci_find_device (used by PCI root) will recursively find a PCIDevice for type 1 config register accesses. - Logging from PCIHost now includes the name of the PCIHost instead of just "PCIHost" because there can be multiple PCI hosts. PCIBridge - Sets num_bars to 2 and hdr_type to 1. - I/O ranges set in the config registers are handled correctly by pci_io_read and pci_io_write. - Memory ranges set in the config registers do not currently affect memory mmio regions. It is assumed that Open Firmware and the OS will set the ranges and BARs correctly to allow all BARs to be accessed fully. bandit, mpc106 - Bandit and Grackle now call pci_io_read_broadcast and pci_io_read_broadcast to pass I/O accesses to downstream PCI devices. - Chaos is modified to work like Bandit even though it will never have PCI bridges attached or devices that support I/O accesses. It's simpler this way.
2022-10-26 06:06:12 +00:00
void pci_wr_exp_rom_bar(uint32_t data);
2022-08-20 10:51:08 +00:00
void map_exp_rom_mem();
Add PCI bridge and multi-function device support. Add PCI bridge and multi-function device support. Overview: - A multi-function device is two or more PCIDevices with the same device number but one device is function zero (as with currently implemented PCIDevices) and the other functions have function numbers between 1 and 7. The device number and function number are properties of the PCIDevice's parent PCIHost connection. - A PCIBridge is a PCIHost (it can connect child PCI devices) and a PCIDevice (it has config space, BARs, and expansion ROM). - A PCIDevice has Type 0 header. It has 6 BARs. - A PCIBridge has Type 1 header. It has 2 BARs. The config space registers beginning from offset 0x18 differ from those of a PCIDevice. Possible future modifications: - Add a PCICardBus class. It is a PCIHost. It has Type 2 header. It has one BAR. The first 20 bytes match Type 0 and Type 1 headers. These exist in New World Macs. They allow hot-plug of PCI devices. - Split base PCI registers (first 16 bytes) into a PCIBase class. Type 1 and 2 have two or one BAR but I think all 6 BARs belong in PCIBase class anyway. - Split PCIHost into two classes: Currently existing PCIHosts (Bandit, Grackle) are PCIHost and PCIRoot (they have the broadcast I/O requests functionality) while PCIBridge is PCIHost only - it can propagate I/O requests but does not originate the broadcast. - pci_register_mmio_region should maybe return a pointer to a region struct so that it can be used for unregistering or modifying the region's range. This may be useful for PCI bridges which have ranges that may constrain memory BARs of their downstream devices. PCIDevice - Moved expansion ROM BAR handling to a separate function pci_wr_exp_rom_bar so that it can be used by both PCI devices and PCI bridges which have the ROM BAR in different locations. It now supports unmapping expansion ROM. Also made exp_rom_bar not writable if there's no ROM. - Added num_bars field which specifies the number of valid BARs since Type 0, 1, and 2 headers have different number of BARs. - map_exp_rom_mem now properly unmaps expansion ROM (using new function unmap_exp_rom_mem) before mapping it again. - Added function set_multi_function which modifies hdr_type to indicate if a device has other functions. This is to be applied only to devices with function number 0. PCIHost - When attaching a PCI device, it will check if it's a multi-function device (there exists an attached function that is not zero) and adjust hdr_type of function 0 of the device accordingly. - Attached PCI bridges are added to a list of PCI bridges attached to the host. - Added pci_io_read_loop and pci_io_write_loop which loop through attached PCI devices to find one that will perform the action for the given I/O address without logging an error (since some other device might perform the action). - Added pci_io_read_broadcast and pci_io_write_broadcast which are used by a PCI root (bandit/grackle). They will log an error if the action is not performed. They should probably do a machine check exception to match real Power Macs. - pci_find_device (used by PCI root) will recursively find a PCIDevice for type 1 config register accesses. - Logging from PCIHost now includes the name of the PCIHost instead of just "PCIHost" because there can be multiple PCI hosts. PCIBridge - Sets num_bars to 2 and hdr_type to 1. - I/O ranges set in the config registers are handled correctly by pci_io_read and pci_io_write. - Memory ranges set in the config registers do not currently affect memory mmio regions. It is assumed that Open Firmware and the OS will set the ranges and BARs correctly to allow all BARs to be accessed fully. bandit, mpc106 - Bandit and Grackle now call pci_io_read_broadcast and pci_io_read_broadcast to pass I/O accesses to downstream PCI devices. - Chaos is modified to work like Bandit even though it will never have PCI bridges attached or devices that support I/O accesses. It's simpler this way.
2022-10-26 06:06:12 +00:00
void unmap_exp_rom_mem();
2020-05-12 18:55:45 +00:00
std::string pci_name; // human-readable device name
PCIHost* host_instance; // host bridge instance to call back
// PCI configuration space state
uint16_t vendor_id;
uint16_t device_id;
uint32_t class_rev; // class code and revision id
uint16_t status = 0;
uint16_t command = 0;
Add PCI bridge and multi-function device support. Add PCI bridge and multi-function device support. Overview: - A multi-function device is two or more PCIDevices with the same device number but one device is function zero (as with currently implemented PCIDevices) and the other functions have function numbers between 1 and 7. The device number and function number are properties of the PCIDevice's parent PCIHost connection. - A PCIBridge is a PCIHost (it can connect child PCI devices) and a PCIDevice (it has config space, BARs, and expansion ROM). - A PCIDevice has Type 0 header. It has 6 BARs. - A PCIBridge has Type 1 header. It has 2 BARs. The config space registers beginning from offset 0x18 differ from those of a PCIDevice. Possible future modifications: - Add a PCICardBus class. It is a PCIHost. It has Type 2 header. It has one BAR. The first 20 bytes match Type 0 and Type 1 headers. These exist in New World Macs. They allow hot-plug of PCI devices. - Split base PCI registers (first 16 bytes) into a PCIBase class. Type 1 and 2 have two or one BAR but I think all 6 BARs belong in PCIBase class anyway. - Split PCIHost into two classes: Currently existing PCIHosts (Bandit, Grackle) are PCIHost and PCIRoot (they have the broadcast I/O requests functionality) while PCIBridge is PCIHost only - it can propagate I/O requests but does not originate the broadcast. - pci_register_mmio_region should maybe return a pointer to a region struct so that it can be used for unregistering or modifying the region's range. This may be useful for PCI bridges which have ranges that may constrain memory BARs of their downstream devices. PCIDevice - Moved expansion ROM BAR handling to a separate function pci_wr_exp_rom_bar so that it can be used by both PCI devices and PCI bridges which have the ROM BAR in different locations. It now supports unmapping expansion ROM. Also made exp_rom_bar not writable if there's no ROM. - Added num_bars field which specifies the number of valid BARs since Type 0, 1, and 2 headers have different number of BARs. - map_exp_rom_mem now properly unmaps expansion ROM (using new function unmap_exp_rom_mem) before mapping it again. - Added function set_multi_function which modifies hdr_type to indicate if a device has other functions. This is to be applied only to devices with function number 0. PCIHost - When attaching a PCI device, it will check if it's a multi-function device (there exists an attached function that is not zero) and adjust hdr_type of function 0 of the device accordingly. - Attached PCI bridges are added to a list of PCI bridges attached to the host. - Added pci_io_read_loop and pci_io_write_loop which loop through attached PCI devices to find one that will perform the action for the given I/O address without logging an error (since some other device might perform the action). - Added pci_io_read_broadcast and pci_io_write_broadcast which are used by a PCI root (bandit/grackle). They will log an error if the action is not performed. They should probably do a machine check exception to match real Power Macs. - pci_find_device (used by PCI root) will recursively find a PCIDevice for type 1 config register accesses. - Logging from PCIHost now includes the name of the PCIHost instead of just "PCIHost" because there can be multiple PCI hosts. PCIBridge - Sets num_bars to 2 and hdr_type to 1. - I/O ranges set in the config registers are handled correctly by pci_io_read and pci_io_write. - Memory ranges set in the config registers do not currently affect memory mmio regions. It is assumed that Open Firmware and the OS will set the ranges and BARs correctly to allow all BARs to be accessed fully. bandit, mpc106 - Bandit and Grackle now call pci_io_read_broadcast and pci_io_read_broadcast to pass I/O accesses to downstream PCI devices. - Chaos is modified to work like Bandit even though it will never have PCI bridges attached or devices that support I/O accesses. It's simpler this way.
2022-10-26 06:06:12 +00:00
uint8_t hdr_type = 0; // header type, single function
uint8_t lat_timer = 0; // latency timer
uint8_t cache_ln_sz = 0; // cache line size
uint16_t subsys_id = 0;
uint16_t subsys_vndr = 0;
uint8_t cap_ptr = 0;
uint8_t max_lat = 0;
uint8_t min_gnt = 0;
uint8_t irq_pin = 0;
uint8_t irq_line = 0;
bool has_io_space = false;
Add PCI bridge and multi-function device support. Add PCI bridge and multi-function device support. Overview: - A multi-function device is two or more PCIDevices with the same device number but one device is function zero (as with currently implemented PCIDevices) and the other functions have function numbers between 1 and 7. The device number and function number are properties of the PCIDevice's parent PCIHost connection. - A PCIBridge is a PCIHost (it can connect child PCI devices) and a PCIDevice (it has config space, BARs, and expansion ROM). - A PCIDevice has Type 0 header. It has 6 BARs. - A PCIBridge has Type 1 header. It has 2 BARs. The config space registers beginning from offset 0x18 differ from those of a PCIDevice. Possible future modifications: - Add a PCICardBus class. It is a PCIHost. It has Type 2 header. It has one BAR. The first 20 bytes match Type 0 and Type 1 headers. These exist in New World Macs. They allow hot-plug of PCI devices. - Split base PCI registers (first 16 bytes) into a PCIBase class. Type 1 and 2 have two or one BAR but I think all 6 BARs belong in PCIBase class anyway. - Split PCIHost into two classes: Currently existing PCIHosts (Bandit, Grackle) are PCIHost and PCIRoot (they have the broadcast I/O requests functionality) while PCIBridge is PCIHost only - it can propagate I/O requests but does not originate the broadcast. - pci_register_mmio_region should maybe return a pointer to a region struct so that it can be used for unregistering or modifying the region's range. This may be useful for PCI bridges which have ranges that may constrain memory BARs of their downstream devices. PCIDevice - Moved expansion ROM BAR handling to a separate function pci_wr_exp_rom_bar so that it can be used by both PCI devices and PCI bridges which have the ROM BAR in different locations. It now supports unmapping expansion ROM. Also made exp_rom_bar not writable if there's no ROM. - Added num_bars field which specifies the number of valid BARs since Type 0, 1, and 2 headers have different number of BARs. - map_exp_rom_mem now properly unmaps expansion ROM (using new function unmap_exp_rom_mem) before mapping it again. - Added function set_multi_function which modifies hdr_type to indicate if a device has other functions. This is to be applied only to devices with function number 0. PCIHost - When attaching a PCI device, it will check if it's a multi-function device (there exists an attached function that is not zero) and adjust hdr_type of function 0 of the device accordingly. - Attached PCI bridges are added to a list of PCI bridges attached to the host. - Added pci_io_read_loop and pci_io_write_loop which loop through attached PCI devices to find one that will perform the action for the given I/O address without logging an error (since some other device might perform the action). - Added pci_io_read_broadcast and pci_io_write_broadcast which are used by a PCI root (bandit/grackle). They will log an error if the action is not performed. They should probably do a machine check exception to match real Power Macs. - pci_find_device (used by PCI root) will recursively find a PCIDevice for type 1 config register accesses. - Logging from PCIHost now includes the name of the PCIHost instead of just "PCIHost" because there can be multiple PCI hosts. PCIBridge - Sets num_bars to 2 and hdr_type to 1. - I/O ranges set in the config registers are handled correctly by pci_io_read and pci_io_write. - Memory ranges set in the config registers do not currently affect memory mmio regions. It is assumed that Open Firmware and the OS will set the ranges and BARs correctly to allow all BARs to be accessed fully. bandit, mpc106 - Bandit and Grackle now call pci_io_read_broadcast and pci_io_read_broadcast to pass I/O accesses to downstream PCI devices. - Chaos is modified to work like Bandit even though it will never have PCI bridges attached or devices that support I/O accesses. It's simpler this way.
2022-10-26 06:06:12 +00:00
int num_bars = 6;
uint32_t bars[6] = { 0 }; // base address registers
uint32_t bars_cfg[6] = { 0 }; // configuration values for base address registers
2023-02-04 16:57:46 +00:00
PCIBarType bars_typ[6] = { PCIBarType::Unused }; // types for base address registers
uint32_t exp_bar_cfg = 0; // expansion ROM configuration
uint32_t exp_rom_bar = 0; // expansion ROM base address register
uint32_t exp_rom_addr = 0; // expansion ROM base address
uint32_t exp_rom_size = 0; // expansion ROM size in bytes
std::unique_ptr<uint8_t[]> exp_rom_data;
};
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
inline uint32_t pci_cfg_log(uint32_t value, AccessDetails &details) {
switch (details.size << 2 | details.offset) {
case 0x04: return (uint8_t) value;
case 0x05: return (uint8_t)(value >> 8);
case 0x06: return (uint8_t)(value >> 16);
case 0x07: return (uint8_t)(value >> 24);
case 0x08: return (uint16_t) value;
case 0x09: return (uint16_t) (value >> 8);
case 0x0a: return (uint16_t) (value >> 16);
case 0x0b: return (uint16_t)((value >> 24) | (value << 8));
case 0x10: return value;
case 0x11: return (value >> 8) | (value << 24);
case 0x12: return (value >> 16) | (value << 16);
case 0x13: return (value >> 24) | (value << 8);
default: return 0xffffffff;
}
}
#define SIZE_ARGS details.size == 4 ? 'l' : details.size == 2 ? 'w' : \
details.size == 1 ? 'b' : '0' + details.size
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
#define LOG_READ_UNIMPLEMENTED_CONFIG_REGISTER() \
do { if ((details.flags & PCI_CONFIG_DIRECTION) == PCI_CONFIG_READ) { \
VLOG_F( \
(~-details.size & details.offset) ? loguru::Verbosity_ERROR : loguru::Verbosity_WARNING, \
"%s: read unimplemented config register @%02x.%c", \
this->name.c_str(), reg_offs + details.offset, \
SIZE_ARGS \
); \
} } while(0)
#define LOG_NAMED_CONFIG_REGISTER(reg_verb, reg_name) \
VLOG_F( \
(~-details.size & details.offset) ? loguru::Verbosity_ERROR : loguru::Verbosity_WARNING, \
"%s: %s %s register @%02x.%c = %0*x", \
this->name.c_str(), reg_verb, reg_name, reg_offs + details.offset, \
SIZE_ARGS, \
details.size * 2, pci_cfg_log(value, details) \
)
#define LOG_READ_NAMED_CONFIG_REGISTER(reg_name) \
do { if ((details.flags & PCI_CONFIG_DIRECTION) == PCI_CONFIG_READ) { \
LOG_NAMED_CONFIG_REGISTER("read ", reg_name); \
} } while(0)
#define LOG_WRITE_NAMED_CONFIG_REGISTER(reg_name) \
LOG_NAMED_CONFIG_REGISTER("write", reg_name)
#define LOG_READ_UNIMPLEMENTED_CONFIG_REGISTER_WITH_VALUE() \
LOG_READ_NAMED_CONFIG_REGISTER("unimplemented config")
#define LOG_WRITE_UNIMPLEMENTED_CONFIG_REGISTER() \
LOG_WRITE_NAMED_CONFIG_REGISTER("unimplemented config")
#define LOG_READ_NON_EXISTENT_PCI_DEVICE() \
LOG_F( \
ERROR, \
"%s err: read attempt from non-existent PCI device %02x:%02x.%x @%02x.%c", \
this->name.c_str(), bus_num, dev_num, fun_num, reg_offs + details.offset, \
SIZE_ARGS \
)
#define LOG_WRITE_NON_EXISTENT_PCI_DEVICE() \
LOG_F( \
ERROR, \
"%s err: write attempt to non-existent PCI device %02x:%02x.%x @%02x.%c = %0*x", \
this->name.c_str(), bus_num, dev_num, fun_num, reg_offs + details.offset, \
SIZE_ARGS, \
details.size * 2, BYTESWAP_SIZED(value, details.size) \
)
#endif /* PCI_DEVICE_H */