Commit Graph

100 Commits

Author SHA1 Message Date
Maxim Poliakovski
ca5f81417f sc53c94: refactor state machine. 2022-11-07 12:34:42 +01:00
Maxim Poliakovski
40a02cc0f7 scsidevice: refactor states. 2022-11-07 12:24:02 +01:00
Maxim Poliakovski
49331635b2 scsi_hd: determine image file size with stat(). 2022-11-07 12:15:08 +01:00
Maxim Poliakovski
0c4da80c93 sc53c94: small cosmetic fixes. 2022-11-02 23:23:37 +01:00
Maxim Poliakovski
7bc4b8840a scsi_bus: fix device selection bug. 2022-11-02 23:21:46 +01:00
Maxim Poliakovski
5a59b97257 Sc53C94: implement cycle completion commands. 2022-11-02 22:28:43 +01:00
Maxim Poliakovski
5a33fba75e ScsiDevice: command completion states. 2022-11-02 21:28:30 +01:00
Maxim Poliakovski
0c74ebbc45 scsi_bus: support status and message in. 2022-11-02 21:27:18 +01:00
Maxim Poliakovski
2865a611e7 Sc53C94: implement reading the FIFO register. 2022-11-02 21:19:31 +01:00
Maxim Poliakovski
f2be286515 scsi_bus: fix asserting control lines. 2022-11-01 02:52:30 +01:00
Maxim Poliakovski
2c3a5c3b8f Sc53C94: reading current transfer count. 2022-11-01 02:12:09 +01:00
Maxim Poliakovski
c54c1cdb65 Sc53C94: improve status register. 2022-11-01 02:11:06 +01:00
Maxim Poliakovski
8abefb8f8d machinepdm: properly insert SCSI hard disk image.
Skip SCSI hard disk registration if no disk image was given.
2022-11-01 01:17:50 +01:00
Maxim Poliakovski
6ffe28a8a4 Implement SCSI Pseudo-DMA register on PDM. 2022-11-01 01:17:50 +01:00
Maxim Poliakovski
7ab44886c4 Sc53C94: implement information transfer command. 2022-11-01 01:17:50 +01:00
Maxim Poliakovski
fbfae98d6d scsi_bus: packet data transfers. 2022-10-31 23:21:35 +01:00
Maxim Poliakovski
c7ceb9d6b9 sc53c94: fix setting internal transfer counter. 2022-10-31 23:21:35 +01:00
Maxim Poliakovski
c28fd138c2 nvram: fix initialization bug. 2022-10-31 01:01:46 +01:00
dingusdev
b480903c7a Slight code clean-up
Prevents crashing
2022-10-30 15:38:09 -07:00
Maxim Poliakovski
46a0e82258 scsi_hd: some fixes and improvements. 2022-10-27 14:19:58 +02:00
Maxim Poliakovski
a58c9b1a62 ScsiDevice: fix process_command() signature. 2022-10-27 14:07:20 +02:00
Maxim Poliakovski
f3cd5b8b36 sc53c94: fix sending commands to SCSI devices. 2022-10-27 13:49:41 +02:00
dingusdev
2065f3588b Inquiry cmd fixed 2022-10-26 09:30:05 -07:00
dingusdev
f792b38ea3 Started SCSI command reading 2022-10-26 09:18:32 -07:00
Maxim Poliakovski
4f6bd16f3a sc53c94: support selection and command transfer. 2022-10-25 03:03:15 +02:00
Maxim Poliakovski
c51ea575ca scsi_bus: various fixes and improvements. 2022-10-25 03:03:15 +02:00
Maxim Poliakovski
9efac80271 scsi_hd: fix notify() method. 2022-10-25 03:03:15 +02:00
Maxim Poliakovski
eeb576a927 Improve ScsiDevice class. 2022-10-25 02:53:21 +02:00
dingusdev
3af9729e5b Modest refactoring for SCSI HDs 2022-10-23 16:45:58 -07:00
Maxim Poliakovski
c2abc89a3b Fix SCSI HD interface so it can be added to a bus. 2022-10-22 23:41:19 +02:00
dingusdev
aa1d23e08b Fixed hard disk support
Compiles, still unfinished
2022-10-22 11:41:52 -07:00
dingusdev
ee9573327c Reorganized hard disk code
Not compiling yet.
2022-10-08 16:51:54 -07:00
dingusdev
a61dd5701a Initial prototyping for hard disks 2022-09-01 22:10:52 -07:00
Maxim Poliakovski
5b08f283e5 Hacks for debugging HW interrupts. 2022-08-27 17:38:53 +02:00
joevt
e41b196977 Fix return value for bad pci config address
PCI config read fails should return all 1 bits.
All unused registers in an existing PCI device should return 0.

Because that's what my Power Mac 8600 returns when I run my Open Firmware lspci command.
Any bus/device/function that doesn't exist returns FF and won't be listed by lspci.
Any registers that are unused will show as 00 in the lspci output.

Make grackle log bus:device.function @register.size in all cases.
2022-08-24 07:58:12 -07:00
Maxim Poliakovski
994f8d7155 viacuda: fix interrupts. 2022-08-24 14:15:48 +02:00
joevt
1ccc8d1a25 Fix setenv and printenv
- Allow changing integer variables. Previously they could not be changed.
- Allow changing string variables. Previously they could only be changed if their length increased.
- printenv had a bug with strings longer than 32 characters.
- printenv now translates carriage return (used in nvramrc) as endl (which should perform carriage return and linefeed)
- For integers, setenv assumes decimal number input but if that fails it will try hex conversion. 0x prefix for hex numbers is optional unless the number only has digits 0 - 9.
- setenv converts linefeed to carriage return for string variables. nvramrc requires this for proper editing in Open Firmware.
- Added Open Firmware 2.4 nvram field names to OfNvramHdr comments.
2022-08-22 17:20:04 -07:00
joevt
3ee2ea1871 Fix read/write argument names
base class uses reg_start so derived classes should do the same.
Some derived class already uses reg_start for read method.
2022-08-22 17:16:22 -07:00
joevt
3b4f40635a Register offsets should be logged as hex
- decimal values are confusing (can't tell if 12 means 12 or 18)
- most specs show hex values for register offsets.
2022-08-22 17:16:22 -07:00
joevt
c644d1609f PCI Expansion ROM size should be power of 2
The expansion rom base register indicates the size of the expansion rom by the number of bits that remain zero after code attempts to set them all to 1. For example, a result of fffe0000 means 128K. The 11 least significant bits are ignored in the size calculation, which means the minimum rom size is indicated by fffff800 = 2K.

Handle the case where an expansion rom file might not have a size that is a multiple of 2 or is not greater than 2K.
Bytes between the end of the file and the end of the calculated rom size are set to 0xff.
2022-08-22 17:16:22 -07:00
joevt
d843091a4d Allow setting PCI capabilities pointer
The capabilities pointer is usually a constant, but whatever the capabilities pointer points to has to be handled by the derived class.
2022-08-22 17:16:22 -07:00
joevt
6fad095730 Allow setting PCI status register
Don't always return 0 when reading it. The status register contains some bits that Open Firmware uses to set some properties.
A PCI device can set a default status register value to set those bits.
	this->status = 0x02B0; // 0000  0 01 0  1 0 1 1  0000 Capabilities List, 66 MHz, Fast Back-to-Back, DevSel Speed: Medium
2022-08-22 17:16:22 -07:00
joevt
6af8b52376 changes to pci logging
For invalid or unsupported PCI accesses, do the following:
- log a device's full pci address using pciutils setpci command format bb:dd.f @rr.s (bus:device:function @register+offset.size).
- report as read or write access.
- log value for writes.
- bus, device, function, and register values cannot be determined from Invalid IDSEL values so they will output as ??.
- for invalid IDSEL values, report the entire value of the config_addr.
- for valid IDSEL values, the bus number cannot be determined since IDSEL only specifies device number. It's probably bus 00 but we'll show ?? to indicate an IDSEL type access.

Add missing config type read access logging for chaos.
2022-08-22 17:16:17 -07:00
joevt
63248b0fa2 Set Bandit's HWComponent name
Bandit has two names:
- PCIDevice->pci_name
- PCIDevice:MMIODevice:HWComponent->name
The latter was not being set.
2022-08-22 17:07:50 -07:00
joevt
cd122ce263 Open Firmware is two words
Not OpenFirmware.
Also fixed a spelling mistake and removed some extra spaces.
2022-08-22 16:47:38 -07:00
Maxim Poliakovski
e097b7a0a1 bandit: fix return value for empty slots. 2022-08-22 15:05:35 +02:00
Maxim Poliakovski
32b8c8ed43 pcidevice: fix expansion ROM mapping. 2022-08-20 12:51:08 +02:00
Maxim Poliakovski
56c54e4c8c pcihost: add attach_pci_device method. 2022-08-19 18:55:33 +02:00
Maxim Poliakovski
4964008511 machineid: improve Gossamer ID description. 2022-08-15 20:49:06 +02:00
joevt
93fae1ee68 Merge remote-tracking branch 'upstream/master' 2022-08-14 16:38:51 -07:00