Thomas Harte
|
49285e9caa
|
Attempted to implement Sleeper in Drive and therefore in DiskController. Also corrected a couple of nonconformant file names.
|
2017-08-20 11:54:54 -04:00 |
|
Thomas Harte
|
cedb809c21
|
Sketched out a protocol designed to save processing time on anything that may sleep — probably just disk controllers for now but one can easily imagine it being applicable to printers, and possibly sound chips with suitable changes in guarantee for sound packet receivers.
|
2017-08-20 10:53:25 -04:00 |
|
Thomas Harte
|
e6683e7f2d
|
Added the base skeletal stuff of HFE support.
|
2017-08-17 21:48:48 -04:00 |
|
Thomas Harte
|
06e31f5102
|
Consequential to the 6502 change, severs the Atari 2600's cartridge container from its former attempt at runtime polymorphism, in favour of each cartridge's specific hardware being defined as a 'bus extender'.
|
2017-08-16 12:39:15 -04:00 |
|
Thomas Harte
|
6cfc3daacb
|
Introduced a test within the disk controller so as not to request illegal tracks from disks, instead automatically substituting an 'unformatted' track. Which is just empty.
|
2017-08-15 21:52:12 -04:00 |
|
Thomas Harte
|
2d81acb82e
|
Upped C++ standard to C++14 and added an #if that's intended to use the built-in std::gcd when compiled on C++17 or better. Fixed for new signedness warnings resulting for taking the step to C++14.
|
2017-08-11 19:18:45 -04:00 |
|
Thomas Harte
|
570d25214e
|
Made an initial attempt at typer support for the CPC.
|
2017-08-11 11:21:07 -04:00 |
|
Thomas Harte
|
6a65c7a52a
|
Started working on a CPC-oriented analyser; for now I just want to be able to make a good guess at the appropriate file to load from a disk. As it turns out, the CPC simply adopts the CP/M format, so a generic parser is appropriate. This is its beginning.
|
2017-08-10 17:10:21 -04:00 |
|
Thomas Harte
|
4d60b8801c
|
Started trying to factor out just the PLL stream -> FM/MFM events part that is presently in the WD1770.
|
2017-08-05 22:26:15 -04:00 |
|
Thomas Harte
|
3e984e75b6
|
Strung up an empty shell that eventually should contain the 8272, and added appropriate IO decoding to the Amstrad.
|
2017-08-05 19:45:52 -04:00 |
|
Thomas Harte
|
75c59fefab
|
Added an empty husk to begin support for Amstrad CPC disk image formats.
|
2017-08-05 10:02:10 -04:00 |
|
Thomas Harte
|
ad3a98387f
|
Within the Typer framework: hatched out CharacterMapper as a distinct thing from the target for keypresses, better to formalise responsibility but also to make it easy cleanly to sever that stuff into its own little part.
|
2017-08-03 11:42:31 -04:00 |
|
Thomas Harte
|
681d1e2f8d
|
Breaking its typer for now, adapted the ZX80/81 to having a Z80, not being one.
|
2017-08-02 22:12:59 -04:00 |
|
Thomas Harte
|
6ca07f1e28
|
I guess it might end up living somewhere else, but introduced a header with the compiler-specific stuff to allow me to force things inline.
|
2017-08-01 22:04:58 -04:00 |
|
Thomas Harte
|
08ad35efd9
|
It's barely an implementation of the 8255, but ensured that data is bounced into the PortHandler, conveniently assuming the interaction mode used by the CPC.
|
2017-08-01 16:34:13 -04:00 |
|
Thomas Harte
|
58b98267fc
|
Formally transferred ownership of PIO accesses to an incoming template, and decided to start being explicit about how to specify the interfaces and provide fallbacks for optional behaviour for the new, clean generation of interfaces. A full-project sweep will inevitably occur but I'll try to tie off this branch first.
|
2017-08-01 16:15:19 -04:00 |
|
Thomas Harte
|
ace71280a0
|
Removed implementation file; this is only ever going to be a template.
|
2017-08-01 16:00:17 -04:00 |
|
Thomas Harte
|
68ceeab610
|
Created a 6845 class and started pushing data at it and clocking it. It doesn't currently have the concept of a bus but will do, hence the in-header implementation.
|
2017-07-31 19:56:59 -04:00 |
|
Thomas Harte
|
c0f1313830
|
Performed sufficient wiring to get to the point where attempting to load a CDT creates an instance of the Amstrad CPC and then fails only because the thing vends a nullptr CRT.
|
2017-07-30 22:05:29 -04:00 |
|
Thomas Harte
|
5b5720fac0
|
Added to the static analyser the most basic through-path for Amstrad CPC content.
|
2017-07-30 21:15:20 -04:00 |
|
Thomas Harte
|
6ec4e4e3d7
|
Merge branch 'master' into Memptr
|
2017-07-25 23:01:34 -04:00 |
|
Thomas Harte
|
75d67ee770
|
Relocated ClockReceiver.hpp as it's a dependency for parts of the static analyser, and therefore needs to be distinct from the actual emulation parts.
|
2017-07-25 20:20:55 -04:00 |
|
Thomas Harte
|
1ba3f262a2
|
Sketched out a template for clock-receiving components to allow them to be implemented in terms of either half or whole cycles.
|
2017-07-22 21:46:50 -04:00 |
|
Thomas Harte
|
660f0e4c40
|
Added Objective-C through wiring and a Swift test class for Memptr modifications. So far with a single test, that fails.
|
2017-07-21 22:52:25 -04:00 |
|
Thomas Harte
|
2a7fc86b15
|
Enabled stricter warnings.
|
2017-07-21 20:44:35 -04:00 |
|
Thomas Harte
|
8f72fc4a44
|
Factored out from the UEF implementation the concept of being a tape that has a queue of pending pulses and manages that queue.
|
2017-07-16 22:04:40 -04:00 |
|
Thomas Harte
|
238348c885
|
Performed the initial wiring to announce that this application supports TZX files and to route them to the ZX80/81 static analyser. The TZX class itself does not yet do much beyond basic validation. I think it'll be easiest if it follows in UEF's footsteps in queuing up pulses ahead of time, so some factoring out is now required.
|
2017-07-16 21:33:11 -04:00 |
|
Thomas Harte
|
368bff1a82
|
Added a shell class that will one day be able to parse CSW files, plus the logic and metadata to instantiate it when a CSW presents itself.
|
2017-07-10 21:43:58 -04:00 |
|
Thomas Harte
|
3e5c209039
|
Added basic Typer support for the ZX80 and '81.
|
2017-07-09 22:00:34 -04:00 |
|
Thomas Harte
|
28412150e6
|
Added controls for controlling the tape motor of the ZX80/81, assuming I can find an automatic option.
|
2017-07-08 17:59:33 -04:00 |
|
Thomas Harte
|
ac37424878
|
Set up a test class to allow me to discover which of the machine cycle sequences I'm in error on.
|
2017-06-15 19:06:59 -04:00 |
|
Thomas Harte
|
77aa3c187e
|
Rebranded ZX80O as ZX80O81P, with an eye to making it accept ZX81 .p files. Adjusted the initial selection part of the static analyser appropriately.
|
2017-06-11 21:38:32 -04:00 |
|
Thomas Harte
|
7e10c7f9d8
|
Relocated the ZX80/81 concept of a 'file' out from Tape into Data, given that it's an exact duplicate of memory.
|
2017-06-08 19:09:51 -04:00 |
|
Thomas Harte
|
60300851ea
|
Started sketching out a tape parser for ZX80 and '81 files. I think this'll help me to verify whether the .O input is working.
|
2017-06-07 10:12:13 -04:00 |
|
Thomas Harte
|
8c66e1d99d
|
Factored out ZX80/81 video and rejigged to ensure it will keep ticking over irrespective of whether the machine is supplying data.
|
2017-06-06 17:53:23 -04:00 |
|
Thomas Harte
|
b0a7c58287
|
Fixed project to point to the XIB I actually want to keep; fixed that XIB to have the correct contents.
|
2017-06-04 17:57:37 -04:00 |
|
Thomas Harte
|
d2637123c4
|
Added necessary support to get as far as an empty window when attempting to load a piece of ZX80 software.
|
2017-06-04 17:55:19 -04:00 |
|
Thomas Harte
|
02b7c3d1b0
|
Added the necessary wiring to get into a ZX80/81-oriented part of the static analyser, which could in principle post a ZX80 target.
|
2017-06-04 17:04:06 -04:00 |
|
Thomas Harte
|
655809517c
|
Ensured that there is a subclass of file that is entrusted to load .O/.80 files, and that the code routes such files to it, noting that it should consider whether a ZX80 is required.
|
2017-06-04 16:37:03 -04:00 |
|
Thomas Harte
|
fd6623b5a5
|
Attempted to bring a common hierarchy to the Z80 and 6502 test machines, particularly with a view to eliminating the special-case Jam stuff on the 6502.
|
2017-06-03 21:22:16 -04:00 |
|
Thomas Harte
|
b304c3a4b9
|
Eliminated the 6502's reliance on the micro-op scheduler.
|
2017-06-03 20:30:07 -04:00 |
|
Thomas Harte
|
3e9212aaff
|
Plumbed through to allow interrupt tests, wrote an NMI test, corrected the error revealed.
|
2017-06-03 17:41:45 -04:00 |
|
Thomas Harte
|
244b5ba3c2
|
Added a proper termination condition for Zexall and, for now, a Mhz counter.
|
2017-05-30 18:32:38 -04:00 |
|
Thomas Harte
|
3c6f63abcc
|
Started towards running the FUSE tests. Just need to deal with the memory segments.
|
2017-05-25 19:12:59 -04:00 |
|
Thomas Harte
|
e3e461d7cb
|
Added a test class for running the FUSE tests. With nothing much in it.
|
2017-05-21 22:49:24 -04:00 |
|
Thomas Harte
|
11d05fb3b8
|
Expanded a little on operations, added an implementation or two.
|
2017-05-19 19:18:35 -04:00 |
|
Thomas Harte
|
58efca835f
|
Sought to add a further opcode.
|
2017-05-18 22:53:43 -04:00 |
|
Thomas Harte
|
87a021ec2d
|
Made further attempt to get as fas as having the Z80 attempt to do something.
|
2017-05-16 22:19:40 -04:00 |
|
Thomas Harte
|
189317b80c
|
Added enough of a Z80 test machine to bridge up into Swift.
|
2017-05-16 22:05:42 -04:00 |
|
Thomas Harte
|
7190f927b7
|
Factored out the stuff that both all-RAM processors would share, rather than duplicating it.
|
2017-05-16 21:28:17 -04:00 |
|