123 Commits

Author	SHA1	Message	Date
Thomas Harte	8de6caf6ff	Started trying to get into a proper structure here. Chickened out.	2017-02-11 12:59:13 -05:00
Thomas Harte	40d3f5f7f6	Attempted properly to respect start.	2017-02-11 08:26:09 -05:00
Thomas Harte	64d5712d1d	Added an incorrectly-coded version of horizontal move, at least so that I can verify that information is going into the correct slots.	2017-02-10 07:23:43 -05:00
Thomas Harte	3b20d862f0	Made an initial attempt to mark sprite positions. But without hmove implemented, they're all over the place.	2017-02-09 20:53:42 -05:00
Thomas Harte	2e9ef2b0ef	Took a shot at reinstating the horizontal blank extend flag.	2017-02-09 18:37:19 -05:00
Thomas Harte	70745286a5	Ensured this array is properly aligned for the uin32_t accesses I intend to make for background drawing.	2017-02-08 20:25:23 -05:00
Thomas Harte	dcb7584060	Added the four-cycle playfield output latency and ensured you can't get smaller-than-usual pixels by rapid register value changing.	2017-02-08 07:30:32 -05:00
Thomas Harte	a477499724	Got a bit more explicit with range returned by get_cycles_until_horizontal_blank and hence attempted a more thorough (/correct) version of WSYNC.	2017-02-07 22:14:45 -05:00
Thomas Harte	944d835eea	Switched explicitly to an accumulation model for filling the collision buffer.	2017-02-06 21:59:28 -05:00
Thomas Harte	8f5039130c	Changed index naming order to ensure no out-of-bounds accesses.	2017-02-06 21:48:41 -05:00
Thomas Harte	ba165bb70a	Made an attempt properly to populate collision registers from the collision buffer.	2017-02-06 21:15:55 -05:00
Thomas Harte	474e2e8d2c	Fixed once again to respect mid-line palette changes.	2017-02-06 20:09:12 -05:00
Thomas Harte	8b8eb787df	Fixed complete invisibility.	2017-02-06 18:42:58 -05:00
Thomas Harte	66bcdd36f3	Made an attempt to introduce an intermediate buffer that ends up with a bit mask of all graphical components present on it, and to use that to infer collision flags and colours, based on playfield priority and colour palette. Immediately yielding: a blank screen. Good work!	2017-02-06 18:29:00 -05:00
Thomas Harte	6bcf95042c	Started trying to be a bit more explicit about usage, and to divide up drawing responsibility.	2017-02-05 17:51:56 -05:00
Thomas Harte	f2437cb257	Added some additional documentation, started making steps towards returning sprites, fixed a counter bug that would exhibit as incorrect sync.	2017-01-31 20:30:32 -05:00
Thomas Harte	abe04334c2	Attempted to retain more player information, and removed the output cursor from class storage as I think it's acceptable as a temporary.	2017-01-30 22:42:27 -05:00
Thomas Harte	8545707b54	Reinstituted the playfield. Probably needs more buffering though. Time to look into delays.	2017-01-30 21:38:58 -05:00
Thomas Harte	2b08758b2b	Started capturing playfield/ball and background colours.	2017-01-30 08:08:03 -05:00
Thomas Harte	764b528891	Made a first attempt at switching to a model that respects blank and sync.	2017-01-30 07:19:19 -05:00
Thomas Harte	92754ace7a	Some mild fixes get me up to having a rolling screen of vertical lines. Which is what I was hoping for right now!	2017-01-29 22:16:23 -05:00
Thomas Harte	d51f185dc7	Made an attempt to reintroduce the basic horizontal loop.	2017-01-29 15:43:57 -05:00
Thomas Harte	2390358c24	Prevented unbounded CPU usage, albeit without yet deciding who has authority for the clock rate.	2017-01-29 14:19:26 -05:00
Thomas Harte	2432a3b4d7	Fixed condition — >= is smarter.	2017-01-29 14:00:01 -05:00
Thomas Harte	9c3597c7e3	Attempted to reintroduce enough logic to handle [most of] line timing, such that WSYNC works. Initial objective is to get back to having a working background.	2017-01-29 13:47:36 -05:00
Thomas Harte	fba6baaa9c	Stubbed and disabled to get back to building.	2017-01-28 21:56:01 -05:00
Thomas Harte	a246530953	Supposing the TIA were implemented, this is (more or less) what the Atari 2600 would now look like.	2017-01-28 21:46:40 -05:00
Thomas Harte	0ffded72a6	Created a placeholder class for a factored-out TIA. There's a bit more it'll need to do, like vending (or receiving) a CRT but this is the full hardware stuff, I think.	2017-01-28 16:19:08 -05:00
Thomas Harte	6d087ca054	Restored 2600 audio.	2017-01-25 21:29:19 -05:00
Thomas Harte	be1cb2a551	Fixed NTSC phase.	2017-01-11 21:31:24 -05:00
Thomas Harte	a549fd1ecc	Introduced the ability simply to piggy-back off the CRT's natural phase for the colour burst, thereby eliminating a couple of redundant independent attempts in the Oric and Electron.	2016-12-10 13:42:34 -05:00
Thomas Harte	ebb62a2d78	Switched the 2600 to postfix and non-camel-case instance variable names.	2016-12-03 14:07:38 -05:00
Thomas Harte	b81c058c0a	Factored out the Atari 2600's 6532 connection, as a low-hanging fruit.	2016-12-03 13:41:55 -05:00
Thomas Harte	3361d6b93a	Factored out the Atari 2600 speaker and adjusted it to postfix underscores.	2016-12-03 13:39:46 -05:00
Thomas Harte	922dd6a586	Hit up the other two kinds of audio generator.	2016-10-07 17:10:00 -04:00
Thomas Harte	ee8510984f	Added just enough wiring to restore the 2600 to functionality.	2016-09-15 19:34:45 -04:00
Thomas Harte	d9016909ed	Added some wiring for PAL/NTSC mode switching on the Vic, making an attempt to simplify the whole loop of having different clock rates.	2016-08-14 13:33:20 -04:00
Thomas Harte	8db44eed3e	Added a default implementation of Speaker::skip_samples.	2016-07-04 20:48:27 -04:00
Thomas Harte	bfa237397d	Settled on assigning to nullptr as the appropriate style for emptying shared_ptrs; fixed the Vic properly to release its output resources.	2016-07-04 20:34:11 -04:00
Thomas Harte	88964ceac0	Eliminated plain pointer passing for object types.	2016-07-04 19:33:55 -04:00
Thomas Harte	0182b0483a	Added a 'power on' flag that is set automatically at construction but can be declined. Saves all that stuff of every machine having to set and then unset the RST line, and fixes an Electron bug related to that.	2016-06-29 19:13:24 -04:00
Thomas Harte	454e98302d	Slight rearrangement plus a setting of the CSMachine delegate corrects audio after a clock rate change.	2016-06-20 22:18:41 -04:00
Thomas Harte	31b26b8118	Made a first attempt to implement the full top-to-bottom change of clock rates, giving the Atari the ability to change rate when it switches to PAL mode, as it should always have been.	2016-06-20 21:47:27 -04:00
Thomas Harte	88e2b382e5	Made an attempt at a full and thorough 6532 implementation (and got a bit more explicit about flag size in the 6502).	2016-06-20 18:57:35 -04:00
Thomas Harte	065ec618c4	Factored out and templated the 6532, finally taking the opportunity to add a means to control the on-console switches of an Atari 2600.	2016-06-19 19:36:34 -04:00
Thomas Harte	65413f078c	Factored out the 6532, eventually to make it testable.	2016-06-19 18:57:40 -04:00
Thomas Harte	00a9f1bf24	Fixed best-effort updater actually to run, finally moved clock rate announcement into the C++ side of things, started working on a mechanism to allow clock rate to be updated.	2016-06-16 20:39:46 -04:00
Thomas Harte	12d1cac751	Merge branch 'master' into Vic-20	2016-06-10 18:23:55 -04:00
Thomas Harte	805e2d15c6	Fixed timing when clock is divided.	2016-06-10 18:20:16 -04:00
Thomas Harte	581eace478	Increased logging slightly, ensured all of colour RAM can be read, slightly improved the 2600 pixel decoder.	2016-06-07 22:01:14 -04:00