Thomas Harte
bcf6f665b8
Simplifies and completes DBcc tests.
...
Subject to omitting a few that look to me like duplicates.
2019-06-20 17:19:25 -04:00
Thomas Harte
bd069490b5
Incorporates approximately half of the DBcc tests.
2019-06-20 16:29:32 -04:00
Thomas Harte
624b0b6372
Adds Scc tests. No implementation fixes required.
2019-06-19 21:42:54 -04:00
Thomas Harte
7976cf5b3c
Adds ADDA tests. All passing without 68000 changes.
2019-06-19 21:31:14 -04:00
Thomas Harte
440f52c943
Incorporates TRAP test.
2019-06-19 21:18:30 -04:00
Thomas Harte
47b1218a68
Adds a couple of the one-shots: SWAP, MOVE USP.
2019-06-19 19:10:36 -04:00
Thomas Harte
91ced056d2
Adds tests for ADD. No failures.
2019-06-19 18:56:21 -04:00
Thomas Harte
8dace34e63
Imports third-party tests for ABCD, and thereby fixes ABCD.
2019-06-19 18:13:06 -04:00
Thomas Harte
b98f10cb45
Substitutes working GCR test.
2019-06-18 14:24:55 -04:00
Thomas Harte
df56e6fe53
Fixed: the sector number also goes into sector bodies.
...
Also the checksum is written in the other order, and the final byte of data isn't output.
2019-06-18 10:34:10 -04:00
Thomas Harte
5c8aacdc17
Fixes the more obvious issues with GCR encoding: byte order, top bit selection.
2019-06-16 17:17:24 -04:00
Thomas Harte
745a5ab749
Introduces failing test of Macintosh GCR data encoding.
2019-06-16 16:53:03 -04:00
Thomas Harte
fe0dc4df88
Starts building out some tests for Apple GCR encoding.
2019-06-15 22:48:24 -04:00
Thomas Harte
5e2496d59c
Simplifies and corrects MOVE logic.
2019-05-28 15:17:03 -04:00
Thomas Harte
c52da9d802
Adds some logging preparatory to a MOVE change.
2019-05-28 15:05:42 -04:00
Thomas Harte
4f9f73ca81
Corrects tests affected by change in run_for_instructions semantics and new program base address.
2019-05-03 15:05:14 -04:00
Thomas Harte
93616a4903
Completes test of a vectored interrupt.
...
Correcting issues uncovered.
2019-05-02 00:00:09 -04:00
Thomas Harte
bb07206c55
Corrects internet response to work as currently implemented.
...
Also makes corrections to the bus error and address error exceptions.
2019-05-01 21:59:06 -04:00
Thomas Harte
e430f2658f
Adds a test and by that means fixes divide-by-zero exception return addresses.
2019-04-29 23:09:50 -04:00
Thomas Harte
7332c64964
Improves testing of function as distinct from timing.
2019-04-29 22:08:37 -04:00
Thomas Harte
d6e16d0042
Adds a test of TOS 1.00, as far as it goes without meaningful hardware.
2019-04-29 18:04:57 -04:00
Thomas Harte
8e02d29ae6
Trims test to length of trace capture.
2019-04-29 17:56:49 -04:00
Thomas Harte
c0e9c37cc7
Improves memory map model, as far as it goes.
2019-04-29 17:27:44 -04:00
Thomas Harte
5b5bfc8445
Applies trace testing to EmuTOS.
2019-04-29 16:55:21 -04:00
Thomas Harte
c466b6f9e7
Factors out the [unit testing] stuff of being a trace-checking 68000 bus handler.
2019-04-29 16:11:01 -04:00
Thomas Harte
407643c575
Tweaks test length slightly to ensure this doesn't run beyond the final line's end.
2019-04-29 15:40:17 -04:00
Thomas Harte
d9071ee9f1
Starts sketching out the asynchronous bus.
2019-04-29 13:45:53 -04:00
Thomas Harte
d9278e9827
Attempts to complete the list of things I can't disassemble.
...
Mysteries to be solved here, definitely. But: 13 missing opcodes remaining.
2019-04-28 23:11:49 -04:00
Thomas Harte
0298b1b3b7
Implements LINK and UNLINK.
...
Also starts excluding opcodes that I can't determine the mapping of from the list of those tested against.
Due to those two things together, the latter incomplete: 627 opcodes outstanding. But only STOP and MOVEP remain on my list of things to implement prior to exceptions.
2019-04-28 17:12:31 -04:00
Thomas Harte
cf547ef569
Improves semantic communications and temporarily omits A- and F-line instructions.
...
So it looks like 2773 instructions left to go.
2019-04-27 15:15:03 -04:00
Thomas Harte
40f68b70c1
Adds quantification of reports.
...
Depressingly; 11,841 opcodes are still missing. Better get on with it!
2019-04-26 13:25:34 -04:00
Thomas Harte
a3b6d2d16e
Corrects test and resolves all instances of opcodes that are valid but shouldn't be.
...
The converse case will require implementation of the remaining instructions.
2019-04-25 22:54:58 -04:00
Thomas Harte
3983f8303f
Introduces failing test of 68000 opcode coverage.
2019-04-25 22:06:05 -04:00
Thomas Harte
7cbd5e0ef6
Imports additional files used as test cases.
2019-04-25 21:43:47 -04:00
Thomas Harte
7df85ea695
Cleans up and formally introduces a comparative source for QL startup.
2019-04-25 15:42:41 -04:00
Thomas Harte
a08043ae88
Ensures that MOVE.b #, (xxx).l writes only a byte.
...
Also rearranges some of the temporary logging functionality.
2019-04-23 19:01:58 -04:00
Thomas Harte
6d6046757d
Fixes predecrementing MOVEM to leave the proper address in the relevant register.
2019-04-22 15:41:09 -04:00
Thomas Harte
44eb4e51ed
Ensures DBcc properly signals program fetches.
2019-04-21 22:54:20 -04:00
Thomas Harte
3cb042a49d
Corrects the carry and extend flags for various long-word operations.
2019-04-21 22:08:18 -04:00
Thomas Harte
0be9a0cb88
Corrects Scc (and other conditionals) for complex addressing modes.
2019-04-20 18:35:19 -04:00
Thomas Harte
ef33b004f9
Corrects word access order of MOVEM.l.
2019-04-20 15:13:12 -04:00
Thomas Harte
2cac4b0d74
Corrects EA usage for ADDA and SUBA.
2019-04-19 23:02:41 -04:00
Thomas Harte
a49f516265
Corrects direction of MOVE [to/from] USP.
2019-04-19 22:41:06 -04:00
Thomas Harte
2d97fc1f59
Beefs up documentation and developer support.
2019-04-19 13:29:35 -04:00
Thomas Harte
ee7ae11e90
Implements EXG and SWAP.
2019-04-19 11:27:43 -04:00
Thomas Harte
c265ea9847
Corrects byte writes in both test machines.
2019-04-17 16:39:10 -04:00
Thomas Harte
b64da2710a
Corrects a few MOVE #s.
2019-04-17 10:00:14 -04:00
Thomas Harte
82b08d0e3a
Corrects addressing behaviour of nRd[+-].
2019-04-17 08:53:34 -04:00
Thomas Harte
62e4c23961
Corrects memory map, causing the RAM test no longer to fail.
2019-04-15 13:03:32 -04:00
Thomas Harte
a223cd90a1
Adds predecrement TSTs, increases QL running time, reduces logging.
2019-04-15 12:36:08 -04:00