llvm-6502/lib/Target/ARM/ARMBaseInstrInfo.h

509 lines
20 KiB
C
Raw Normal View History

//===- ARMBaseInstrInfo.h - ARM Base Instruction Information ----*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file contains the Base ARM implementation of the TargetInstrInfo class.
//
//===----------------------------------------------------------------------===//
#ifndef ARMBASEINSTRUCTIONINFO_H
#define ARMBASEINSTRUCTIONINFO_H
#include "ARM.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/Target/TargetInstrInfo.h"
Making use of VFP / NEON floating point multiply-accumulate / subtraction is difficult on current ARM implementations for a few reasons. 1. Even though a single vmla has latency that is one cycle shorter than a pair of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause additional pipeline stall. So it's frequently better to single codegen vmul + vadd. 2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to stall for 4 cycles. We need to schedule them apart. 3. A vmla followed vmla is a special case. Obvious issuing back to back RAW vmla + vmla is very bad. But this isn't ideal either: vmul vadd vmla Instead, we want to expand the second vmla: vmla vmul vadd Even with the 4 cycle vmul stall, the second sequence is still 2 cycles faster. Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough but it isn't the optimial solution. This patch attempts to make it possible to use vmla / vmls in cases where it is profitable. A. Add missing isel predicates which cause vmla to be codegen'ed. B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to compute a fmul and a fmla. C. Add additional isel checks for vmla, avoid cases where vmla is feeding into fp instructions (except for the #3 exceptional case). D. Add ARM hazard recognizer to model the vmla / vmls hazards. E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the vmla / vmls will trigger one of the special hazards. Work in progress, only A+B are enabled. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-05 22:04:16 +00:00
#include "llvm/ADT/DenseMap.h"
#include "llvm/ADT/SmallSet.h"
namespace llvm {
class ARMSubtarget;
class ARMBaseRegisterInfo;
/// ARMII - This namespace holds all of the target specific flags that
/// instruction info tracks.
///
namespace ARMII {
enum {
//===------------------------------------------------------------------===//
// Instruction Flags.
//===------------------------------------------------------------------===//
// This four-bit field describes the addressing mode used.
AddrModeMask = 0x1f, // The AddrMode enums are declared in ARMBaseInfo.h
// Size* - Flags to keep track of the size of an instruction.
SizeShift = 5,
SizeMask = 7 << SizeShift,
SizeSpecial = 1, // 0 byte pseudo or special case.
Size8Bytes = 2,
Size4Bytes = 3,
Size2Bytes = 4,
// IndexMode - Unindex, pre-indexed, or post-indexed are valid for load
// and store ops only. Generic "updating" flag is used for ld/st multiple.
// The index mode enums are declared in ARMBaseInfo.h
IndexModeShift = 8,
IndexModeMask = 3 << IndexModeShift,
//===------------------------------------------------------------------===//
// Instruction encoding formats.
//
FormShift = 10,
FormMask = 0x3f << FormShift,
// Pseudo instructions
Pseudo = 0 << FormShift,
// Multiply instructions
MulFrm = 1 << FormShift,
// Branch instructions
BrFrm = 2 << FormShift,
BrMiscFrm = 3 << FormShift,
// Data Processing instructions
DPFrm = 4 << FormShift,
DPSoRegFrm = 5 << FormShift,
// Load and Store
LdFrm = 6 << FormShift,
StFrm = 7 << FormShift,
LdMiscFrm = 8 << FormShift,
StMiscFrm = 9 << FormShift,
LdStMulFrm = 10 << FormShift,
LdStExFrm = 11 << FormShift,
// Miscellaneous arithmetic instructions
ArithMiscFrm = 12 << FormShift,
SatFrm = 13 << FormShift,
// Extend instructions
ExtFrm = 14 << FormShift,
// VFP formats
VFPUnaryFrm = 15 << FormShift,
VFPBinaryFrm = 16 << FormShift,
VFPConv1Frm = 17 << FormShift,
VFPConv2Frm = 18 << FormShift,
VFPConv3Frm = 19 << FormShift,
VFPConv4Frm = 20 << FormShift,
VFPConv5Frm = 21 << FormShift,
VFPLdStFrm = 22 << FormShift,
VFPLdStMulFrm = 23 << FormShift,
VFPMiscFrm = 24 << FormShift,
// Thumb format
ThumbFrm = 25 << FormShift,
// Miscelleaneous format
MiscFrm = 26 << FormShift,
// NEON formats
NGetLnFrm = 27 << FormShift,
NSetLnFrm = 28 << FormShift,
NDupFrm = 29 << FormShift,
NLdStFrm = 30 << FormShift,
N1RegModImmFrm= 31 << FormShift,
N2RegFrm = 32 << FormShift,
NVCVTFrm = 33 << FormShift,
NVDupLnFrm = 34 << FormShift,
N2RegVShLFrm = 35 << FormShift,
N2RegVShRFrm = 36 << FormShift,
N3RegFrm = 37 << FormShift,
N3RegVShFrm = 38 << FormShift,
NVExtFrm = 39 << FormShift,
NVMulSLFrm = 40 << FormShift,
NVTBLFrm = 41 << FormShift,
//===------------------------------------------------------------------===//
// Misc flags.
// UnaryDP - Indicates this is a unary data processing instruction, i.e.
// it doesn't have a Rn operand.
UnaryDP = 1 << 16,
// Xform16Bit - Indicates this Thumb2 instruction may be transformed into
// a 16-bit Thumb instruction if certain conditions are met.
Xform16Bit = 1 << 17,
//===------------------------------------------------------------------===//
// Code domain.
DomainShift = 18,
DomainMask = 7 << DomainShift,
DomainGeneral = 0 << DomainShift,
DomainVFP = 1 << DomainShift,
DomainNEON = 2 << DomainShift,
DomainNEONA8 = 4 << DomainShift,
//===------------------------------------------------------------------===//
// Field shifts - such shifts are used to set field while generating
// machine instructions.
//
// FIXME: This list will need adjusting/fixing as the MC code emitter
// takes shape and the ARMCodeEmitter.cpp bits go away.
ShiftTypeShift = 4,
M_BitShift = 5,
ShiftImmShift = 5,
ShiftShift = 7,
N_BitShift = 7,
ImmHiShift = 8,
SoRotImmShift = 8,
RegRsShift = 8,
ExtRotImmShift = 10,
RegRdLoShift = 12,
RegRdShift = 12,
RegRdHiShift = 16,
RegRnShift = 16,
S_BitShift = 20,
W_BitShift = 21,
AM3_I_BitShift = 22,
D_BitShift = 22,
U_BitShift = 23,
P_BitShift = 24,
I_BitShift = 25,
CondShift = 28
};
}
class ARMBaseInstrInfo : public TargetInstrInfoImpl {
const ARMSubtarget &Subtarget;
Making use of VFP / NEON floating point multiply-accumulate / subtraction is difficult on current ARM implementations for a few reasons. 1. Even though a single vmla has latency that is one cycle shorter than a pair of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause additional pipeline stall. So it's frequently better to single codegen vmul + vadd. 2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to stall for 4 cycles. We need to schedule them apart. 3. A vmla followed vmla is a special case. Obvious issuing back to back RAW vmla + vmla is very bad. But this isn't ideal either: vmul vadd vmla Instead, we want to expand the second vmla: vmla vmul vadd Even with the 4 cycle vmul stall, the second sequence is still 2 cycles faster. Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough but it isn't the optimial solution. This patch attempts to make it possible to use vmla / vmls in cases where it is profitable. A. Add missing isel predicates which cause vmla to be codegen'ed. B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to compute a fmul and a fmla. C. Add additional isel checks for vmla, avoid cases where vmla is feeding into fp instructions (except for the #3 exceptional case). D. Add ARM hazard recognizer to model the vmla / vmls hazards. E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the vmla / vmls will trigger one of the special hazards. Work in progress, only A+B are enabled. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-05 22:04:16 +00:00
protected:
// Can be only subclassed.
explicit ARMBaseInstrInfo(const ARMSubtarget &STI);
Making use of VFP / NEON floating point multiply-accumulate / subtraction is difficult on current ARM implementations for a few reasons. 1. Even though a single vmla has latency that is one cycle shorter than a pair of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause additional pipeline stall. So it's frequently better to single codegen vmul + vadd. 2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to stall for 4 cycles. We need to schedule them apart. 3. A vmla followed vmla is a special case. Obvious issuing back to back RAW vmla + vmla is very bad. But this isn't ideal either: vmul vadd vmla Instead, we want to expand the second vmla: vmla vmul vadd Even with the 4 cycle vmul stall, the second sequence is still 2 cycles faster. Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough but it isn't the optimial solution. This patch attempts to make it possible to use vmla / vmls in cases where it is profitable. A. Add missing isel predicates which cause vmla to be codegen'ed. B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to compute a fmul and a fmla. C. Add additional isel checks for vmla, avoid cases where vmla is feeding into fp instructions (except for the #3 exceptional case). D. Add ARM hazard recognizer to model the vmla / vmls hazards. E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the vmla / vmls will trigger one of the special hazards. Work in progress, only A+B are enabled. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-05 22:04:16 +00:00
public:
// Return the non-pre/post incrementing version of 'Opc'. Return 0
// if there is not such an opcode.
virtual unsigned getUnindexedOpcode(unsigned Opc) const =0;
virtual MachineInstr *convertToThreeAddress(MachineFunction::iterator &MFI,
MachineBasicBlock::iterator &MBBI,
LiveVariables *LV) const;
virtual const ARMBaseRegisterInfo &getRegisterInfo() const =0;
const ARMSubtarget &getSubtarget() const { return Subtarget; }
Making use of VFP / NEON floating point multiply-accumulate / subtraction is difficult on current ARM implementations for a few reasons. 1. Even though a single vmla has latency that is one cycle shorter than a pair of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause additional pipeline stall. So it's frequently better to single codegen vmul + vadd. 2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to stall for 4 cycles. We need to schedule them apart. 3. A vmla followed vmla is a special case. Obvious issuing back to back RAW vmla + vmla is very bad. But this isn't ideal either: vmul vadd vmla Instead, we want to expand the second vmla: vmla vmul vadd Even with the 4 cycle vmul stall, the second sequence is still 2 cycles faster. Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough but it isn't the optimial solution. This patch attempts to make it possible to use vmla / vmls in cases where it is profitable. A. Add missing isel predicates which cause vmla to be codegen'ed. B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to compute a fmul and a fmla. C. Add additional isel checks for vmla, avoid cases where vmla is feeding into fp instructions (except for the #3 exceptional case). D. Add ARM hazard recognizer to model the vmla / vmls hazards. E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the vmla / vmls will trigger one of the special hazards. Work in progress, only A+B are enabled. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-05 22:04:16 +00:00
ScheduleHazardRecognizer *
CreateTargetHazardRecognizer(const TargetMachine *TM,
const ScheduleDAG *DAG) const;
ScheduleHazardRecognizer *
CreateTargetPostRAHazardRecognizer(const InstrItineraryData *II,
const ScheduleDAG *DAG) const;
Making use of VFP / NEON floating point multiply-accumulate / subtraction is difficult on current ARM implementations for a few reasons. 1. Even though a single vmla has latency that is one cycle shorter than a pair of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause additional pipeline stall. So it's frequently better to single codegen vmul + vadd. 2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to stall for 4 cycles. We need to schedule them apart. 3. A vmla followed vmla is a special case. Obvious issuing back to back RAW vmla + vmla is very bad. But this isn't ideal either: vmul vadd vmla Instead, we want to expand the second vmla: vmla vmul vadd Even with the 4 cycle vmul stall, the second sequence is still 2 cycles faster. Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough but it isn't the optimial solution. This patch attempts to make it possible to use vmla / vmls in cases where it is profitable. A. Add missing isel predicates which cause vmla to be codegen'ed. B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to compute a fmul and a fmla. C. Add additional isel checks for vmla, avoid cases where vmla is feeding into fp instructions (except for the #3 exceptional case). D. Add ARM hazard recognizer to model the vmla / vmls hazards. E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the vmla / vmls will trigger one of the special hazards. Work in progress, only A+B are enabled. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-05 22:04:16 +00:00
// Branch analysis.
virtual bool AnalyzeBranch(MachineBasicBlock &MBB, MachineBasicBlock *&TBB,
MachineBasicBlock *&FBB,
SmallVectorImpl<MachineOperand> &Cond,
bool AllowModify = false) const;
virtual unsigned RemoveBranch(MachineBasicBlock &MBB) const;
virtual unsigned InsertBranch(MachineBasicBlock &MBB, MachineBasicBlock *TBB,
MachineBasicBlock *FBB,
const SmallVectorImpl<MachineOperand> &Cond,
DebugLoc DL) const;
virtual
bool ReverseBranchCondition(SmallVectorImpl<MachineOperand> &Cond) const;
// Predication support.
bool isPredicated(const MachineInstr *MI) const {
int PIdx = MI->findFirstPredOperandIdx();
return PIdx != -1 && MI->getOperand(PIdx).getImm() != ARMCC::AL;
}
ARMCC::CondCodes getPredicate(const MachineInstr *MI) const {
int PIdx = MI->findFirstPredOperandIdx();
return PIdx != -1 ? (ARMCC::CondCodes)MI->getOperand(PIdx).getImm()
: ARMCC::AL;
}
virtual
bool PredicateInstruction(MachineInstr *MI,
const SmallVectorImpl<MachineOperand> &Pred) const;
virtual
bool SubsumesPredicate(const SmallVectorImpl<MachineOperand> &Pred1,
const SmallVectorImpl<MachineOperand> &Pred2) const;
virtual bool DefinesPredicate(MachineInstr *MI,
std::vector<MachineOperand> &Pred) const;
virtual bool isPredicable(MachineInstr *MI) const;
/// GetInstSize - Returns the size of the specified MachineInstr.
///
virtual unsigned GetInstSizeInBytes(const MachineInstr* MI) const;
virtual unsigned isLoadFromStackSlot(const MachineInstr *MI,
int &FrameIndex) const;
virtual unsigned isStoreToStackSlot(const MachineInstr *MI,
int &FrameIndex) const;
virtual void copyPhysReg(MachineBasicBlock &MBB,
MachineBasicBlock::iterator I, DebugLoc DL,
unsigned DestReg, unsigned SrcReg,
bool KillSrc) const;
virtual void storeRegToStackSlot(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MBBI,
unsigned SrcReg, bool isKill, int FrameIndex,
const TargetRegisterClass *RC,
const TargetRegisterInfo *TRI) const;
virtual void loadRegFromStackSlot(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MBBI,
unsigned DestReg, int FrameIndex,
const TargetRegisterClass *RC,
const TargetRegisterInfo *TRI) const;
virtual MachineInstr *emitFrameIndexDebugValue(MachineFunction &MF,
int FrameIx,
uint64_t Offset,
const MDNode *MDPtr,
DebugLoc DL) const;
virtual void reMaterialize(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MI,
unsigned DestReg, unsigned SubIdx,
const MachineInstr *Orig,
const TargetRegisterInfo &TRI) const;
MachineInstr *duplicate(MachineInstr *Orig, MachineFunction &MF) const;
virtual bool produceSameValue(const MachineInstr *MI0,
const MachineInstr *MI1,
const MachineRegisterInfo *MRI) const;
/// areLoadsFromSameBasePtr - This is used by the pre-regalloc scheduler to
/// determine if two loads are loading from the same base address. It should
/// only return true if the base pointers are the same and the only
/// differences between the two addresses is the offset. It also returns the
/// offsets by reference.
virtual bool areLoadsFromSameBasePtr(SDNode *Load1, SDNode *Load2,
int64_t &Offset1, int64_t &Offset2)const;
/// shouldScheduleLoadsNear - This is a used by the pre-regalloc scheduler to
/// determine (in conjunction with areLoadsFromSameBasePtr) if two loads should
/// be scheduled togther. On some targets if two loads are loading from
/// addresses in the same cache line, it's better if they are scheduled
/// together. This function takes two integers that represent the load offsets
/// from the common base address. It returns true if it decides it's desirable
/// to schedule the two loads together. "NumLoads" is the number of loads that
/// have already been scheduled after Load1.
virtual bool shouldScheduleLoadsNear(SDNode *Load1, SDNode *Load2,
int64_t Offset1, int64_t Offset2,
unsigned NumLoads) const;
virtual bool isSchedulingBoundary(const MachineInstr *MI,
const MachineBasicBlock *MBB,
const MachineFunction &MF) const;
virtual bool isProfitableToIfCvt(MachineBasicBlock &MBB,
unsigned NumCycles, unsigned ExtraPredCycles,
float Prob, float Confidence) const;
virtual bool isProfitableToIfCvt(MachineBasicBlock &TMBB,
unsigned NumT, unsigned ExtraT,
MachineBasicBlock &FMBB,
unsigned NumF, unsigned ExtraF,
float Probability, float Confidence) const;
virtual bool isProfitableToDupForIfCvt(MachineBasicBlock &MBB,
unsigned NumCycles,
float Probability,
float Confidence) const {
return NumCycles == 1;
}
/// AnalyzeCompare - For a comparison instruction, return the source register
/// in SrcReg and the value it compares against in CmpValue. Return true if
/// the comparison instruction can be analyzed.
virtual bool AnalyzeCompare(const MachineInstr *MI, unsigned &SrcReg,
int &CmpMask, int &CmpValue) const;
/// OptimizeCompareInstr - Convert the instruction to set the zero flag so
/// that we can remove a "comparison with zero".
virtual bool OptimizeCompareInstr(MachineInstr *CmpInstr, unsigned SrcReg,
int CmpMask, int CmpValue,
const MachineRegisterInfo *MRI) const;
/// FoldImmediate - 'Reg' is known to be defined by a move immediate
/// instruction, try to fold the immediate into the use instruction.
virtual bool FoldImmediate(MachineInstr *UseMI, MachineInstr *DefMI,
unsigned Reg, MachineRegisterInfo *MRI) const;
virtual unsigned getNumMicroOps(const InstrItineraryData *ItinData,
const MachineInstr *MI) const;
virtual
int getOperandLatency(const InstrItineraryData *ItinData,
const MachineInstr *DefMI, unsigned DefIdx,
const MachineInstr *UseMI, unsigned UseIdx) const;
virtual
int getOperandLatency(const InstrItineraryData *ItinData,
SDNode *DefNode, unsigned DefIdx,
SDNode *UseNode, unsigned UseIdx) const;
private:
int getVLDMDefCycle(const InstrItineraryData *ItinData,
const TargetInstrDesc &DefTID,
unsigned DefClass,
unsigned DefIdx, unsigned DefAlign) const;
int getLDMDefCycle(const InstrItineraryData *ItinData,
const TargetInstrDesc &DefTID,
unsigned DefClass,
unsigned DefIdx, unsigned DefAlign) const;
int getVSTMUseCycle(const InstrItineraryData *ItinData,
const TargetInstrDesc &UseTID,
unsigned UseClass,
unsigned UseIdx, unsigned UseAlign) const;
int getSTMUseCycle(const InstrItineraryData *ItinData,
const TargetInstrDesc &UseTID,
unsigned UseClass,
unsigned UseIdx, unsigned UseAlign) const;
int getOperandLatency(const InstrItineraryData *ItinData,
const TargetInstrDesc &DefTID,
unsigned DefIdx, unsigned DefAlign,
const TargetInstrDesc &UseTID,
unsigned UseIdx, unsigned UseAlign) const;
int getInstrLatency(const InstrItineraryData *ItinData,
const MachineInstr *MI, unsigned *PredCost = 0) const;
int getInstrLatency(const InstrItineraryData *ItinData,
SDNode *Node) const;
bool hasHighOperandLatency(const InstrItineraryData *ItinData,
const MachineRegisterInfo *MRI,
const MachineInstr *DefMI, unsigned DefIdx,
const MachineInstr *UseMI, unsigned UseIdx) const;
bool hasLowDefLatency(const InstrItineraryData *ItinData,
const MachineInstr *DefMI, unsigned DefIdx) const;
Making use of VFP / NEON floating point multiply-accumulate / subtraction is difficult on current ARM implementations for a few reasons. 1. Even though a single vmla has latency that is one cycle shorter than a pair of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause additional pipeline stall. So it's frequently better to single codegen vmul + vadd. 2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to stall for 4 cycles. We need to schedule them apart. 3. A vmla followed vmla is a special case. Obvious issuing back to back RAW vmla + vmla is very bad. But this isn't ideal either: vmul vadd vmla Instead, we want to expand the second vmla: vmla vmul vadd Even with the 4 cycle vmul stall, the second sequence is still 2 cycles faster. Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough but it isn't the optimial solution. This patch attempts to make it possible to use vmla / vmls in cases where it is profitable. A. Add missing isel predicates which cause vmla to be codegen'ed. B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to compute a fmul and a fmla. C. Add additional isel checks for vmla, avoid cases where vmla is feeding into fp instructions (except for the #3 exceptional case). D. Add ARM hazard recognizer to model the vmla / vmls hazards. E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the vmla / vmls will trigger one of the special hazards. Work in progress, only A+B are enabled. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-05 22:04:16 +00:00
private:
/// Modeling special VFP / NEON fp MLA / MLS hazards.
/// MLxEntryMap - Map fp MLA / MLS to the corresponding entry in the internal
/// MLx table.
DenseMap<unsigned, unsigned> MLxEntryMap;
/// MLxHazardOpcodes - Set of add / sub and multiply opcodes that would cause
/// stalls when scheduled together with fp MLA / MLS opcodes.
SmallSet<unsigned, 16> MLxHazardOpcodes;
public:
/// isFpMLxInstruction - Return true if the specified opcode is a fp MLA / MLS
/// instruction.
bool isFpMLxInstruction(unsigned Opcode) const {
return MLxEntryMap.count(Opcode);
}
/// isFpMLxInstruction - This version also returns the multiply opcode and the
/// addition / subtraction opcode to expand to. Return true for 'HasLane' for
/// the MLX instructions with an extra lane operand.
bool isFpMLxInstruction(unsigned Opcode, unsigned &MulOpc,
unsigned &AddSubOpc, bool &NegAcc,
bool &HasLane) const;
/// canCauseFpMLxStall - Return true if an instruction of the specified opcode
/// will cause stalls when scheduled after (within 4-cycle window) a fp
/// MLA / MLS instruction.
bool canCauseFpMLxStall(unsigned Opcode) const {
return MLxHazardOpcodes.count(Opcode);
}
};
static inline
const MachineInstrBuilder &AddDefaultPred(const MachineInstrBuilder &MIB) {
return MIB.addImm((int64_t)ARMCC::AL).addReg(0);
}
static inline
const MachineInstrBuilder &AddDefaultCC(const MachineInstrBuilder &MIB) {
return MIB.addReg(0);
}
static inline
const MachineInstrBuilder &AddDefaultT1CC(const MachineInstrBuilder &MIB,
bool isDead = false) {
return MIB.addReg(ARM::CPSR, getDefRegState(true) | getDeadRegState(isDead));
}
static inline
const MachineInstrBuilder &AddNoT1CC(const MachineInstrBuilder &MIB) {
return MIB.addReg(0);
}
static inline
bool isUncondBranchOpcode(int Opc) {
return Opc == ARM::B || Opc == ARM::tB || Opc == ARM::t2B;
}
static inline
bool isCondBranchOpcode(int Opc) {
return Opc == ARM::Bcc || Opc == ARM::tBcc || Opc == ARM::t2Bcc;
}
static inline
bool isJumpTableBranchOpcode(int Opc) {
return Opc == ARM::BR_JTr || Opc == ARM::BR_JTm || Opc == ARM::BR_JTadd ||
Opc == ARM::tBR_JTr || Opc == ARM::t2BR_JT;
}
static inline
bool isIndirectBranchOpcode(int Opc) {
return Opc == ARM::BX || Opc == ARM::MOVPCRX || Opc == ARM::tBRIND;
}
/// getInstrPredicate - If instruction is predicated, returns its predicate
/// condition, otherwise returns AL. It also returns the condition code
/// register by reference.
ARMCC::CondCodes getInstrPredicate(const MachineInstr *MI, unsigned &PredReg);
int getMatchingCondBranchOpcode(int Opc);
/// emitARMRegPlusImmediate / emitT2RegPlusImmediate - Emits a series of
/// instructions to materializea destreg = basereg + immediate in ARM / Thumb2
/// code.
void emitARMRegPlusImmediate(MachineBasicBlock &MBB,
MachineBasicBlock::iterator &MBBI, DebugLoc dl,
unsigned DestReg, unsigned BaseReg, int NumBytes,
ARMCC::CondCodes Pred, unsigned PredReg,
const ARMBaseInstrInfo &TII, unsigned MIFlags = 0);
void emitT2RegPlusImmediate(MachineBasicBlock &MBB,
MachineBasicBlock::iterator &MBBI, DebugLoc dl,
unsigned DestReg, unsigned BaseReg, int NumBytes,
ARMCC::CondCodes Pred, unsigned PredReg,
const ARMBaseInstrInfo &TII, unsigned MIFlags = 0);
void emitThumbRegPlusImmediate(MachineBasicBlock &MBB,
MachineBasicBlock::iterator &MBBI, DebugLoc dl,
unsigned DestReg, unsigned BaseReg,
int NumBytes, const TargetInstrInfo &TII,
const ARMBaseRegisterInfo& MRI,
unsigned MIFlags = 0);
/// rewriteARMFrameIndex / rewriteT2FrameIndex -
/// Rewrite MI to access 'Offset' bytes from the FP. Return false if the
/// offset could not be handled directly in MI, and return the left-over
/// portion by reference.
bool rewriteARMFrameIndex(MachineInstr &MI, unsigned FrameRegIdx,
unsigned FrameReg, int &Offset,
const ARMBaseInstrInfo &TII);
bool rewriteT2FrameIndex(MachineInstr &MI, unsigned FrameRegIdx,
unsigned FrameReg, int &Offset,
const ARMBaseInstrInfo &TII);
} // End llvm namespace
#endif