llvm-6502/lib/Target/Mips/MipsTargetMachine.cpp

259 lines
8.5 KiB
C++
Raw Normal View History

//===-- MipsTargetMachine.cpp - Define TargetMachine for Mips -------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// Implements the info about Mips target spec.
//
//===----------------------------------------------------------------------===//
#include "MipsTargetMachine.h"
#include "Mips.h"
#include "Mips16FrameLowering.h"
#include "Mips16HardFloat.h"
#include "Mips16ISelDAGToDAG.h"
#include "Mips16ISelLowering.h"
#include "Mips16InstrInfo.h"
#include "MipsFrameLowering.h"
#include "MipsInstrInfo.h"
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
#include "MipsModuleISelDAGToDAG.h"
This is for an experimental option -mips-os16. The idea is to compile all Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this would happen as long as floating point instructions are not needed. Probably it would also make sense to compile as mips32 if atomic operations are needed too. There may be other cases too. A module pass prescans the IR and adds the mips16 or nomips16 attribute to functions depending on the functions needs. Mips 16 mode can result in a 40% code compression by utililizing 16 bit encoding of many instructions. The hope is for this to replace the traditional gcc way of dealing with Mips16 code using floating point which involves essentially using soft float but with a library implemented using mips32 floating point. This gcc method also requires creating stubs so that Mips32 code can interact with these Mips 16 functions that have floating point needs. My conjecture is that in reality this traditional gcc method would never win over this new method. I will be implementing the traditional gcc method also. Some of it is already done but I needed to do the stubs to finish the work and those required this mips16/32 mixed mode capability. I have more ideas for to make this new method much better and I think the old method will just live in llvm for anyone that needs the backward compatibility but I don't for what reason that would be needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-10 16:58:04 +00:00
#include "MipsOs16.h"
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
#include "MipsSEFrameLowering.h"
#include "MipsSEISelDAGToDAG.h"
#include "MipsSEISelLowering.h"
#include "MipsSEInstrInfo.h"
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
#include "llvm/Analysis/TargetTransformInfo.h"
#include "llvm/CodeGen/Passes.h"
#include "llvm/PassManager.h"
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
#include "llvm/Support/Debug.h"
#include "llvm/Support/TargetRegistry.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Transforms/Scalar.h"
using namespace llvm;
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
extern "C" void LLVMInitializeMipsTarget() {
// Register the target.
RegisterTargetMachine<MipsebTargetMachine> X(TheMipsTarget);
RegisterTargetMachine<MipselTargetMachine> Y(TheMipselTarget);
RegisterTargetMachine<MipsebTargetMachine> A(TheMips64Target);
RegisterTargetMachine<MipselTargetMachine> B(TheMips64elTarget);
}
static std::string computeDataLayout(const MipsSubtarget &ST) {
std::string Ret = "";
// There are both little and big endian mips.
if (ST.isLittle())
Ret += "e";
else
Ret += "E";
Ret += "-m:m";
// Pointers are 32 bit on some ABIs.
if (!ST.isABI_N64())
Ret += "-p:32:32";
// 8 and 16 bit integers only need no have natural alignment, but try to
// align them to 32 bits. 64 bit integers have natural alignment.
Ret += "-i8:8:32-i16:16:32-i64:64";
// 32 bit registers are always available and the stack is at least 64 bit
// aligned. On N64 64 bit registers are also available and the stack is
// 128 bit aligned.
if (ST.isABI_N64() || ST.isABI_N32())
Ret += "-n32:64-S128";
else
Ret += "-n32-S64";
return Ret;
}
// On function prologue, the stack is created by decrementing
// its pointer. Once decremented, all references are done with positive
// offset from the stack/frame pointer, using StackGrowsUp enables
// an easier handling.
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
// Using CodeModel::Large enables different CALL behavior.
MipsTargetMachine::
MipsTargetMachine(const Target &T, StringRef TT,
StringRef CPU, StringRef FS, const TargetOptions &Options,
Reloc::Model RM, CodeModel::Model CM,
CodeGenOpt::Level OL,
bool isLittle)
: LLVMTargetMachine(T, TT, CPU, FS, Options, RM, CM, OL),
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
Subtarget(TT, CPU, FS, isLittle, RM, this),
DL(computeDataLayout(Subtarget)),
InstrInfo(MipsInstrInfo::create(*this)),
FrameLowering(MipsFrameLowering::create(*this, Subtarget)),
TLInfo(MipsTargetLowering::create(*this)), TSInfo(*this),
InstrItins(Subtarget.getInstrItineraryData()), JITInfo() {
initAsmInfo();
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
}
void MipsTargetMachine::setHelperClassesMips16() {
InstrInfoSE.swap(InstrInfo);
FrameLoweringSE.swap(FrameLowering);
TLInfoSE.swap(TLInfo);
if (!InstrInfo16) {
InstrInfo.reset(MipsInstrInfo::create(*this));
FrameLowering.reset(MipsFrameLowering::create(*this, Subtarget));
TLInfo.reset(MipsTargetLowering::create(*this));
} else {
InstrInfo16.swap(InstrInfo);
FrameLowering16.swap(FrameLowering);
TLInfo16.swap(TLInfo);
}
assert(TLInfo && "null target lowering 16");
assert(InstrInfo && "null instr info 16");
assert(FrameLowering && "null frame lowering 16");
}
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
void MipsTargetMachine::setHelperClassesMipsSE() {
InstrInfo16.swap(InstrInfo);
FrameLowering16.swap(FrameLowering);
TLInfo16.swap(TLInfo);
if (!InstrInfoSE) {
InstrInfo.reset(MipsInstrInfo::create(*this));
FrameLowering.reset(MipsFrameLowering::create(*this, Subtarget));
TLInfo.reset(MipsTargetLowering::create(*this));
} else {
InstrInfoSE.swap(InstrInfo);
FrameLoweringSE.swap(FrameLowering);
TLInfoSE.swap(TLInfo);
}
assert(TLInfo && "null target lowering in SE");
assert(InstrInfo && "null instr info SE");
assert(FrameLowering && "null frame lowering SE");
}
void MipsebTargetMachine::anchor() { }
MipsebTargetMachine::
MipsebTargetMachine(const Target &T, StringRef TT,
StringRef CPU, StringRef FS, const TargetOptions &Options,
Reloc::Model RM, CodeModel::Model CM,
CodeGenOpt::Level OL)
: MipsTargetMachine(T, TT, CPU, FS, Options, RM, CM, OL, false) {}
void MipselTargetMachine::anchor() { }
MipselTargetMachine::
MipselTargetMachine(const Target &T, StringRef TT,
StringRef CPU, StringRef FS, const TargetOptions &Options,
Reloc::Model RM, CodeModel::Model CM,
CodeGenOpt::Level OL)
: MipsTargetMachine(T, TT, CPU, FS, Options, RM, CM, OL, true) {}
namespace {
/// Mips Code Generator Pass Configuration Options.
class MipsPassConfig : public TargetPassConfig {
public:
MipsPassConfig(MipsTargetMachine *TM, PassManagerBase &PM)
: TargetPassConfig(TM, PM) {
// The current implementation of long branch pass requires a scratch
// register ($at) to be available before branch instructions. Tail merging
// can break this requirement, so disable it when long branch pass is
// enabled.
EnableTailMerge = !getMipsSubtarget().enableLongBranchPass();
}
MipsTargetMachine &getMipsTargetMachine() const {
return getTM<MipsTargetMachine>();
}
const MipsSubtarget &getMipsSubtarget() const {
return *getMipsTargetMachine().getSubtargetImpl();
}
This is for an experimental option -mips-os16. The idea is to compile all Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this would happen as long as floating point instructions are not needed. Probably it would also make sense to compile as mips32 if atomic operations are needed too. There may be other cases too. A module pass prescans the IR and adds the mips16 or nomips16 attribute to functions depending on the functions needs. Mips 16 mode can result in a 40% code compression by utililizing 16 bit encoding of many instructions. The hope is for this to replace the traditional gcc way of dealing with Mips16 code using floating point which involves essentially using soft float but with a library implemented using mips32 floating point. This gcc method also requires creating stubs so that Mips32 code can interact with these Mips 16 functions that have floating point needs. My conjecture is that in reality this traditional gcc method would never win over this new method. I will be implementing the traditional gcc method also. Some of it is already done but I needed to do the stubs to finish the work and those required this mips16/32 mixed mode capability. I have more ideas for to make this new method much better and I think the old method will just live in llvm for anyone that needs the backward compatibility but I don't for what reason that would be needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-10 16:58:04 +00:00
virtual void addIRPasses();
virtual bool addInstSelector();
virtual void addMachineSSAOptimization();
virtual bool addPreEmitPass();
virtual bool addPreRegAlloc();
};
} // namespace
TargetPassConfig *MipsTargetMachine::createPassConfig(PassManagerBase &PM) {
return new MipsPassConfig(this, PM);
}
This is for an experimental option -mips-os16. The idea is to compile all Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this would happen as long as floating point instructions are not needed. Probably it would also make sense to compile as mips32 if atomic operations are needed too. There may be other cases too. A module pass prescans the IR and adds the mips16 or nomips16 attribute to functions depending on the functions needs. Mips 16 mode can result in a 40% code compression by utililizing 16 bit encoding of many instructions. The hope is for this to replace the traditional gcc way of dealing with Mips16 code using floating point which involves essentially using soft float but with a library implemented using mips32 floating point. This gcc method also requires creating stubs so that Mips32 code can interact with these Mips 16 functions that have floating point needs. My conjecture is that in reality this traditional gcc method would never win over this new method. I will be implementing the traditional gcc method also. Some of it is already done but I needed to do the stubs to finish the work and those required this mips16/32 mixed mode capability. I have more ideas for to make this new method much better and I think the old method will just live in llvm for anyone that needs the backward compatibility but I don't for what reason that would be needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-10 16:58:04 +00:00
void MipsPassConfig::addIRPasses() {
TargetPassConfig::addIRPasses();
if (getMipsSubtarget().os16())
addPass(createMipsOs16(getMipsTargetMachine()));
if (getMipsSubtarget().inMips16HardFloat())
addPass(createMips16HardFloat(getMipsTargetMachine()));
addPass(createPartiallyInlineLibCallsPass());
This is for an experimental option -mips-os16. The idea is to compile all Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this would happen as long as floating point instructions are not needed. Probably it would also make sense to compile as mips32 if atomic operations are needed too. There may be other cases too. A module pass prescans the IR and adds the mips16 or nomips16 attribute to functions depending on the functions needs. Mips 16 mode can result in a 40% code compression by utililizing 16 bit encoding of many instructions. The hope is for this to replace the traditional gcc way of dealing with Mips16 code using floating point which involves essentially using soft float but with a library implemented using mips32 floating point. This gcc method also requires creating stubs so that Mips32 code can interact with these Mips 16 functions that have floating point needs. My conjecture is that in reality this traditional gcc method would never win over this new method. I will be implementing the traditional gcc method also. Some of it is already done but I needed to do the stubs to finish the work and those required this mips16/32 mixed mode capability. I have more ideas for to make this new method much better and I think the old method will just live in llvm for anyone that needs the backward compatibility but I don't for what reason that would be needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-10 16:58:04 +00:00
}
// Install an instruction selector pass using
// the ISelDag to gen Mips code.
bool MipsPassConfig::addInstSelector() {
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
if (getMipsSubtarget().allowMixed16_32()) {
addPass(createMipsModuleISelDag(getMipsTargetMachine()));
addPass(createMips16ISelDag(getMipsTargetMachine()));
addPass(createMipsSEISelDag(getMipsTargetMachine()));
} else {
addPass(createMipsISelDag(getMipsTargetMachine()));
}
return false;
}
void MipsPassConfig::addMachineSSAOptimization() {
addPass(createMipsOptimizePICCallPass(getMipsTargetMachine()));
TargetPassConfig::addMachineSSAOptimization();
}
bool MipsPassConfig::addPreRegAlloc() {
if (getOptLevel() == CodeGenOpt::None) {
addPass(createMipsOptimizePICCallPass(getMipsTargetMachine()));
return true;
}
else
return false;
}
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
void MipsTargetMachine::addAnalysisPasses(PassManagerBase &PM) {
if (Subtarget.allowMixed16_32()) {
DEBUG(errs() << "No ");
//FIXME: The Basic Target Transform Info
// pass needs to become a function pass instead of
// being an immutable pass and then this method as it exists now
// would be unnecessary.
PM.add(createNoTargetTransformInfoPass());
} else
LLVMTargetMachine::addAnalysisPasses(PM);
DEBUG(errs() << "Target Transform Info Pass Added\n");
}
// Implemented by targets that want to run passes immediately before
// machine code is emitted. return true if -print-machineinstrs should
// print out the code after the passes.
bool MipsPassConfig::addPreEmitPass() {
MipsTargetMachine &TM = getMipsTargetMachine();
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
const MipsSubtarget &Subtarget = TM.getSubtarget<MipsSubtarget>();
addPass(createMipsDelaySlotFillerPass(TM));
if (Subtarget.enableLongBranchPass())
addPass(createMipsLongBranchPass(TM));
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
if (Subtarget.inMips16Mode() ||
Subtarget.allowMixed16_32())
addPass(createMipsConstantIslandPass(TM));
return true;
}
bool MipsTargetMachine::addCodeEmitter(PassManagerBase &PM,
JITCodeEmitter &JCE) {
// Machine code emitter pass for Mips.
PM.add(createMipsJITCodeEmitterPass(*this, JCE));
return false;
}