We had a few places where we did
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
but those could instead do
for (auto *EltTy : STy->elements()) {
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243136 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243114 91177308-0d34-0410-b5e6-96231b3b80d8
Some shufflevectors are currently being incorrectly lowered in the AArch32
backend as the existing checks for detecting the NEON operations from the
shufflevector instruction expects the shuffle mask and the vector operands to be
of the same length.
This is not always the case as the mask may be twice as long as the operand;
here only the lower half of the shufflemask gets checked, so provided the lower
half of the shufflemask looks like a vector transpose (or even is just all -1
for undef) then the intrinsics may get incorrectly lowered into a vector
transpose (VTRN) instruction.
This patch fixes this by accommodating for both cases and adds regression tests.
Differential Revision: http://reviews.llvm.org/D11407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243103 91177308-0d34-0410-b5e6-96231b3b80d8
is an immediate, in this check the value is negated and stored in and int64_t.
The value can be -2^63 yet the result cannot be stored in an int64_t and this
gives some undefined behaviour causing failures. The negation is only necessary
when the values is within a certain range and so it should not need to negate
-2^63, this patch introduces this and also a regression test.
Differential Revision: http://reviews.llvm.org/D11408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243100 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 0f720d984f.
It breaks clang too badly, I need to prepare a proper patch for clang
first.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243089 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243083 91177308-0d34-0410-b5e6-96231b3b80d8
Adds pushes to the folding tables.
This also required a fix to the TD definition, since the memory forms of
the push instructions did not have the right mayLoad/mayStore flags.
Differential Revision: http://reviews.llvm.org/D11340
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243010 91177308-0d34-0410-b5e6-96231b3b80d8
The DAG Node "SCALAR_TO_VECTOR" may be created if the type of the scalar element is legal.
Added a check for the scalar type before creating this node.
Added a test that fails with assertion on the current version.
Differential Revision: http://reviews.llvm.org/D11413
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242994 91177308-0d34-0410-b5e6-96231b3b80d8
This commit broke the build. Numerous build bots broken, and it was
blocking my progress so reverting.
It should be trivial to reproduce -- enable the BPF backend and it
should fail when running llvm-tblgen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242992 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add a basic CodeGen bitcode test which (for now) only prints out the function name and nothing else. The current code merely implements the basic needed for the test run to not crash / assert. Getting to that point required:
- Basic InstPrinter.
- Basic AsmPrinter.
- DiagnosticInfoUnsupported (not strictly required, but nice to have, duplicated from AMDGPU/BPF's ISelLowering).
- Some SP and register setup in WebAssemblyTargetLowering.
- Basic LowerFormalArguments.
- GenInstrInfo.
- Placeholder LowerFormalArguments.
- Placeholder CanLowerReturn and LowerReturn.
- Basic DAGToDAGISel::Select, which requiresGenDAGISel.inc as well as GET_INSTRINFO_ENUM with GenInstrInfo.inc.
- Remove WebAssemblyFrameLowering::determineCalleeSaves and rely on default.
- Implement WebAssemblyFrameLowering::hasFP, same as AArch64's implementation.
Follow-up patches will implement a real AsmPrinter, which will require adding MI opcodes specific to WebAssembly.
Reviewers: sunfish
Subscribers: aemerson, jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D11369
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242939 91177308-0d34-0410-b5e6-96231b3b80d8
Shrink-wrapping can now be tested on ARM with -enable-shrink-wrap.
Related to <rdar://problem/20821730>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242908 91177308-0d34-0410-b5e6-96231b3b80d8
through APIs that are no longer necessary now that the update API has
been removed.
This will make changes to the AA interfaces significantly less
disruptive (I hope). Either way, it seems like a really nice cleanup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242882 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MCRegAliasIterator only works for physical registers. So, do not run it
on virtual registers.
With this issue fixed, we can resurrect the BranchFolding pass in NVPTX
backend.
Reviewers: jholewinski, bkramer
Subscribers: henryhu, meheff, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242871 91177308-0d34-0410-b5e6-96231b3b80d8
This makes one substantive change and a few stylistic changes to the
VSX swap optimization pass.
The substantive change is to permit LXSDX and LXSSPX instructions to
participate in swap optimization computations. The previous change to
insert a swap following a SUBREG_TO_REG widening operation makes this
almost trivial.
I experimented with also permitting STXSDX and STXSSPX instructions.
This can be done using similar techniques: we could insert a swap
prior to a narrowing COPY operation, and then permit these stores to
participate. I prototyped this, but discovered that the pattern of a
narrowing COPY followed by an STXSDX does not occur in any of our
test-suite code. So instead, I added commentary indicating that this
could be done.
Other TLC:
- I changed SH_COPYSCALAR to SH_COPYWIDEN to more clearly indicate
the direction of the copy.
- I factored the insertion of swap instructions into a separate
function.
Finally, I added a new test case to check that the scalar-to-vector
loads are working properly with swap optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242838 91177308-0d34-0410-b5e6-96231b3b80d8
whether register r9 should be reserved.
This recommits r242737, which broke bots because the number of subtarget
features went over the limit of 64.
This change is needed because we cannot use a backend option to set
cl::opt "arm-reserve-r9" when doing LTO.
Out-of-tree projects currently using cl::opt option "-arm-reserve-r9" to
reserve r9 should make changes to add subtarget feature "reserve-r9" to
the IR.
rdar://problem/21529937
Differential Revision: http://reviews.llvm.org/D11320
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242756 91177308-0d34-0410-b5e6-96231b3b80d8
Re-apply of r241928 which had to be reverted because of the r241926
revert.
This commit factors out common code from MergeBaseUpdateLoadStore() and
MergeBaseUpdateLSMultiple() and introduces a new function
MergeBaseUpdateLSDouble() which merges adds/subs preceding/following a
strd/ldrd instruction into an strd/ldrd instruction with writeback where
possible.
Differential Revision: http://reviews.llvm.org/D10676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242743 91177308-0d34-0410-b5e6-96231b3b80d8
This caused builds to fail with the following error message:
error:Too many subtarget features! Bump MAX_SUBTARGET_FEATURES.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242740 91177308-0d34-0410-b5e6-96231b3b80d8
whether register r9 should be reserved.
This change is needed because we cannot use a backend option to set
cl::opt "arm-reserve-r9" when doing LTO.
Out-of-tree projects currently using cl::opt option "-arm-reserve-r9" to
reserve r9 should make changes to add subtarget feature "reserve-r9" to
the IR.
rdar://problem/21529937
Differential Revision: http://reviews.llvm.org/D11320
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242737 91177308-0d34-0410-b5e6-96231b3b80d8
Even though this is just some hinting for the scheduler it doesn't make
sense to do that unless you know the target can perform the fusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242732 91177308-0d34-0410-b5e6-96231b3b80d8
This patch does the following:
* Fix FIXME on `needsStackRealignment`: it is now shared between multiple targets, implemented in `TargetRegisterInfo`, and isn't `virtual` anymore. This will break out-of-tree targets, silently if they used `virtual` and with a build error if they used `override`.
* Factor out `canRealignStack` as a `virtual` function on `TargetRegisterInfo`, by default only looks for the `no-realign-stack` function attribute.
Multiple targets duplicated the same `needsStackRealignment` code:
- Aarch64.
- ARM.
- Mips almost: had extra `DEBUG` diagnostic, which the default implementation now has.
- PowerPC.
- WebAssembly.
- x86 almost: has an extra `-force-align-stack` option, which the default implementation now has.
The default implementation of `needsStackRealignment` used to just return `false`. My current patch changes the behavior by simply using the above shared behavior. This affects:
- AMDGPU
- BPF
- CppBackend
- MSP430
- NVPTX
- Sparc
- SystemZ
- XCore
- Out-of-tree targets
This is a breaking change! `make check` passes.
The only implementation of the `virtual` function (besides the slight different in x86) was Hexagon (which did `MF.getFrameInfo()->getMaxAlignment() > 8`), and potentially some out-of-tree targets. Hexagon now uses the default implementation.
`needsStackRealignment` was being overwritten in `<Target>GenRegisterInfo.inc`, to return `false` as the default also did. That was odd and is now gone.
Reviewers: sunfish
Subscribers: aemerson, llvm-commits, jfb
Differential Revision: http://reviews.llvm.org/D11160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242727 91177308-0d34-0410-b5e6-96231b3b80d8
