Summary:
This fixes an issue on MIPS where the infinite-loop-evergreen.ll test
was failing to terminate.
Fixes PR24147.
Reviewers: arsenm, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242410 91177308-0d34-0410-b5e6-96231b3b80d8
This adds new intrinsics "*absdiff" for absolute difference ops to facilitate efficient code generation for "sum of absolute differences" operation.
The patch also contains the introduction of corresponding SDNodes and basic legalization support.Sanity of the generated code is tested on X86.
This is 1st of the three patches.
Patch by Shahid Asghar-ahmad!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242409 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The checking pointer grouping algorithm assumes that the
starts/ends of the pointers are well formed (start <= end).
The runtime memory checking algorithm also assumes this by doing:
start0 < end1 && start1 < end0
to detect conflicts. This check only works if start0 <= end0 and
start1 <= end1.
This change correctly orders the interval ends by either checking
the stride (if it is constant) or by using min/max SCEV expressions.
Reviewers: anemet, rengolin
Subscribers: rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11149
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242400 91177308-0d34-0410-b5e6-96231b3b80d8
This allows more call sequences to use pushes instead of movs when optimizing for size.
In particular, calling conventions that pass some parameters in registers (e.g. thiscall) are now supported.
This should no longer cause miscompiles, now that a bug in emitPrologue was fixed in r242395.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242398 91177308-0d34-0410-b5e6-96231b3b80d8
When X86FrameLowering::emitPrologue() looks for where to insert the %esp subtraction
to allocate stack space for local allocations, it assumes that any sequence of push
instructions that starts at function entry consists purely of spills of callee-save
registers.
This may be false, since from some point forward, the pushes may pushing arguments
to a subsequent function call.
This caused a miscompile that was exposed by r240257, and is not easily testable
since r240257 was reverted. A test will be committed separately after r240257 is
reapplied.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242395 91177308-0d34-0410-b5e6-96231b3b80d8
This extension point allows passes to be executed right before the vectorizer
and other highly target specific optimizations are run.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242389 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
The ExecutionEngine will act as an exception and will be unsafe to
be reused across context. We don't enforce this rule but undefined
behavior can occurs if the user tries to do it.
Reviewers: lhames
Subscribers: echristo, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11110
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242387 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242386 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11079
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242385 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Because llvm-dsymutil is using ASMPrinter without any MachineFunction
of Module available.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11078
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242384 91177308-0d34-0410-b5e6-96231b3b80d8
This is made a static public member function to allow the transition of
this logic from LAA to LoopDistribution. (Technically, it could be an
implementation-local static function but then it would not be accessible
from LoopDistribution.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242376 91177308-0d34-0410-b5e6-96231b3b80d8
It miscompiles some code and a reduced test case has been sent to the
author.
This reverts commit r240257.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242373 91177308-0d34-0410-b5e6-96231b3b80d8
Revert the changes to the C API LLVMBuildLandingPad that were part of
the personality function move. We now set the personality on the parent
function when the C API attempts to construct a landingpad with a
personality.
This reverts commit r240010.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242372 91177308-0d34-0410-b5e6-96231b3b80d8
pairs for 32-bit immediates.
This change is needed to avoid emitting movt/movw pairs when doing LTO
and do so on a per-function basis.
Out-of-tree projects currently using cl::opt option -arm-use-movt=0 or
false to avoid emitting movt/movw pairs should make changes to add
subtarget feature "+no-movt" (see the changes made to clang in r242368).
rdar://problem/21529937
Differential Revision: http://reviews.llvm.org/D11026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242369 91177308-0d34-0410-b5e6-96231b3b80d8
The pass here was clearing kill flags on instructions which had
their sources killed in the instruction being combined. But
given that the new instruction is inserted after the existing ones,
any existing instructions with kill flags will lead to the verifier
complaining that we are reading an undefined physreg.
For example, what we had prior to this optimization is
t2STRi12 %R1, %SP, 12
t2STRi12 %R1<kill>, %SP, 16
t2STRi12 %R0<kill>, %SP, 8
and prior to this fix that would generate
t2STRi12 %R1<kill>, %SP, 16
t2STRDi8 %R0<kill>, %R1, %SP, 8
This is clearly incorrect as it didn't clear the kill flag on R1
used with offset 16 because there was no kill flag on the instruction
with offset 12.
After this change we clear the kill flag on the offset 16 instruction
because we know it will be used afterwards in the new instruction.
I haven't provided a test case. I have a small test, but even it is
very sensitive to register allocation order which isn't ideal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242359 91177308-0d34-0410-b5e6-96231b3b80d8
The jump table info is serialized using a YAML mapping that contains its kind
and a YAML sequence of jump table entries. A jump table entry is a YAML mapping
that has an ID and an inline YAML sequence of machine basic block references.
The testcase 'CodeGen/MIR/X86/jump-table-info.mir' doesn't have any instructions
because one of them contains a jump table index operand. The jump table index
operands will be serialized in a follow up patch, and the appropriate
instructions will be added to this testcase.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242357 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a trivial code change with no functionality effect.
When LoopUnswitch determines trivial unswitch condition, it checks whether the loop header's terminator instruction is a branch instruction or switch instruction since trivial unswitch condition can only apply to these two instruction types. The current code does not fail the check directly on other instruction types, but check the nullness of LoopExitBB variable instead. The added else clause makes the check fail immediately on other instruction types and makes the code more obvious.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11239
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242345 91177308-0d34-0410-b5e6-96231b3b80d8
Pass a const reference to LiveRegMatrix to getRegAllocationHints()
because some targets can prodive better hints if they can test whether a
physreg has been used for register allocation yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242340 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the references to the named LLVM alloca instructions from
the stack objects in the machine frame info. This commit adds a field 'Name' to
the struct 'yaml::MachineStackObject'. This new field is used to store the name
of the alloca instruction when the alloca is present and when it has a name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242339 91177308-0d34-0410-b5e6-96231b3b80d8
emit debug info, according to the preferences of the different
debuggers used on various targets.
Darwin and FreeBSD default to tuning for LLDB; PS4 defaults to tuning for
the SCE (Sony Computer Entertainment) debugger. All others default to GDB.
Differential Revision: http://reviews.llvm.org/D8506
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242338 91177308-0d34-0410-b5e6-96231b3b80d8
Self-referential constants containing references to a merged function
no longer cause the MergeFunctions pass to infinite loop. Also adds a
reproduction IR which would otherwise fail, which was isolated from a similar
issue in Chromium.
Author: jrkoenig
Reviewers: nlewycky, jfb
Subscribers: llvm-commits, nlewycky, jfb
Differential Revision: http://reviews.llvm.org/D11208
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242337 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch allows phi nodes like
%x = phi [ %incptr, ... ] [ %var, ... ]
%incptr = getelementptr %x, 1
to be analyzed by BasicAliasAnalysis.
In aliasPHI, we can detect incoming values that are recursive GEPs with a
constant offset. Instead of trying to analyze a recursive GEP (and failing),
we now ignore it and instead set the size of the memory referenced by
the PHINode to UnknownSize. This represents all the possible memory
locations the pointer represented by the PHINode could be advanced to
by the GEP.
For now, this new behavior is turned off by default to allow debugging of
performance degradations seen with SPEC/x86 and Hexagon benchmarks.
The flag -basicaa-recphi turns it on.
Reviewers: hfinkel, sanjoy
Subscribers: tobiasvk_caf, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D10368
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242320 91177308-0d34-0410-b5e6-96231b3b80d8
This is a necessary prerequisite for bootstrapping the emission
of debug info inside modules.
- Adds a FlagExternalTypeRef to DICompositeType.
External types must have a unique identifier.
- External type references are emitted using a forward declaration
with a DW_AT_signature([DW_FORM_ref_sig8]) based on the UID.
http://reviews.llvm.org/D9612
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242302 91177308-0d34-0410-b5e6-96231b3b80d8
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242300 91177308-0d34-0410-b5e6-96231b3b80d8
The vec_sld interface provides access to the vsldoi instruction.
Unlike most of the vec_* interfaces, we do not attempt to change the
generated code for vec_sld based on the endian mode. It is too
difficult to correctly infer the desired semantics because of
different element types, and the corrected instruction sequence is
expensive, involving loading a permute control vector and performing a
generalized permute.
For GCC, this was implemented as "Don't touch the vec_sld"
implementation. When it came time for the LLVM implementation, I did
the same thing. However, this was hasty and incorrect. In LLVM's
version of altivec.h, vec_sld was previously defined in terms of the
vec_perm interface. Because vec_perm semantics are adjusted for
little endian, this means that leaving vec_sld untouched causes it to
generate something different for LE than for BE. Not good.
This back-end patch accompanies the changes to altivec.h that change
vec_sld's behavior for little endian. Those changes mean that we see
slightly different code in the back end when trying to recognize a
VSLDOI instruction in isVSLDOIShuffleMask. In particular, a
ShuffleKind of 1 (where the two inputs are identical) must now be
treated the same way as a ShuffleKind of 2 (little endian with
different inputs) when little endian mode is in force. This is
because ShuffleKind of 1 is defined using big-endian numbering.
This has a ripple effect on LowerBUILD_VECTOR, where we create our own
internal VSLDOI instructions. Because these are a ShuffleKind of 1,
they will now have their shift amounts subtracted from 16 when
recognizing the shuffle mask. To avoid problems we have to subtract
them from 16 again before creating the VSLDOI instructions.
There are a couple of other uses of BuildVSLDOI, but these do not need
to be modified because the shift amount is 8, which is unchanged when
subtracted from 16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242296 91177308-0d34-0410-b5e6-96231b3b80d8
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242295 91177308-0d34-0410-b5e6-96231b3b80d8
- Create a new CopyRewriter for Uncoalescable copy-like instructions
- Change the ValueTracker to return a ValueTrackerResult
This makes optimizeUncoalescable looks more like optimizeCoalescable and
use the CopyRewritter infrastructure.
This is also the preparation for looking up into PHI nodes in the
ValueTracker.
Differential Revision: http://reviews.llvm.org/D11195
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242294 91177308-0d34-0410-b5e6-96231b3b80d8
inspection.
While we want to handle calls specially in this code because they should
have been modeled by the call graph analysis that precedes it, we should
*not* be re-implementing the predicates for whether an instruction reads
or writes memory. Those are well defined already. Notably, at least the
following issues seem to be clearly missed before:
- Ordered atomic loads can "write" to memory by causing writes from other
threads to become visible. Similarly for ordered atomic stores.
- AtomicRMW instructions quite obviously both read and write to memory.
- AtomicCmpXchg instructions also read and write to memory.
- Fences read and write to memory.
- Invokes of intrinsics or memory allocation functions.
I don't have any test cases, and I suspect this has never really come up
in the real world. But there is no reason why it wouldn't, and it makes
the code simpler to do this the right way.
While here, I've tried to make the loops significantly simpler as well
and added helpful comments as to what is going on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242281 91177308-0d34-0410-b5e6-96231b3b80d8
Current implementation handles unordered comparison poorly in soft-float mode.
Consider (a ULE b) which is a <= b. It is lowered to (ledf2(a, b) <= 0 || unorddf2(a, b) != 0) (in general). We can do better job by lowering it to (__gtdf2(a, b) <= 0).
Such replacement is true for other CMP's (ult, ugt, uge). In general, we just call same function as for ordered case but negate comparison against zero.
Differential Revision: http://reviews.llvm.org/D10804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242280 91177308-0d34-0410-b5e6-96231b3b80d8
This is a direct port of the code from the X86 backend (r239486/r240361), which
uses the MachineCombiner to reassociate (floating-point) adds/muls to increase
ILP, to the PowerPC backend. The rationale is the same.
There is a lot of copy-and-paste here between the X86 code and the PowerPC
code, and we should extract at least some of this into CodeGen somewhere.
However, I don't want to do that until this code is enhanced to handle FMAs as
well. After that, we'll be in a better position to extract the common parts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242279 91177308-0d34-0410-b5e6-96231b3b80d8
If the source of the copy that defines the addend is a physical register, then
its existing live range may not extend to the FMA being mutated. Make sure we
extend the live range of the register to meet the FMA because it will become
its operand in this case.
I don't have an independent test case, but it will be exposed by change to be
committed shortly enabling the use of the machine combiner to do fadd/fmul
reassociation, and will be covered by one of the associated regression tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242278 91177308-0d34-0410-b5e6-96231b3b80d8
MachineCombiner predicated its use of scheduling-based metrics on
hasInstrSchedModel(), but useful conclusions can be drawn from pipeline
itineraries as well. Almost all of the logic (except for resource tracking in
preservesResourceLen) can be used if we have an itinerary, so enable it in that
case as well.
This will be used by the PowerPC backend in an upcoming commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242277 91177308-0d34-0410-b5e6-96231b3b80d8
The unsigned opcode argument here was the result of BinaryOperator->getOpcode().
That returns a BinaryOps enum which is more accurate than passing around an
unsigned.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242265 91177308-0d34-0410-b5e6-96231b3b80d8
This code was checking if we are an ICmpInst or FCmpInst then throwing
unreachable if we are neither. We must be one or the other, so use a
cast on the FCmpInst case to ensure that we are that case. Then we can
avoid having an unreachable but still catch an error if we ever had another
subclass of CmpInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242264 91177308-0d34-0410-b5e6-96231b3b80d8
This code was breaking from the case statement if the getStoreSizeInBits()
value was not a multiple of 0. Given that the implementation returns
getStoreSize() * 8, it can only be a multiple of 8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242255 91177308-0d34-0410-b5e6-96231b3b80d8
The calls here were both to getStoreSizeInBits() which multiplies by 8.
We then immediately divided by 8. Calling getStoreSize() returns the
values we need without the extra arithmetic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242254 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful when we want to do block frequency analysis
conditionally (e.g. only in PGO mode) but don't want to add
one more pass dependence.
Patch by congh.
Approved by dexonsmith.
Differential Revision: http://reviews.llvm.org/D11196
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242248 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
processFunctionBeforeCalleeSavedScan was renamed to determineCalleeSaves and now takes a BitVector parameter as of rL242165, reviewed in http://reviews.llvm.org/D10909
WebAssembly is still marked as experimental and therefore doesn't build by default. It does, however, grep by default! I notice that processFunctionBeforeCalleeSavedScan is still mentioned in a few comments and error messages, which I also fixed.
Reviewers: qcolombet, sunfish
Subscribers: jfb, dsanders, hfinkel, MatzeB, llvm-commits
Differential Revision: http://reviews.llvm.org/D11199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242242 91177308-0d34-0410-b5e6-96231b3b80d8
Follow-up r235483, with the corresponding support in PPC. We use a regular call
for symbolic targets (because they're much cheaper than indirect calls).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242239 91177308-0d34-0410-b5e6-96231b3b80d8
I am planning to add more nested classes inside RuntimePointerCheck so
all these triple-nesting would be hard to follow.
Also rename it to RuntimePointerChecking (i.e. append 'ing').
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242218 91177308-0d34-0410-b5e6-96231b3b80d8
We used to take the address specified as the direct target of the patchpoint
and did no TOC-pointer handling. This, however, as not all that useful,
because MCJIT tends to create a lot of modules, and they have their own TOC
sections. Thus, to call from the generated code to other generated code, you
really need to switch TOC pointers. Make this work as expected, and under
ELFv1, tread the address as the function descriptor address so that the correct
TOC pointer can be loaded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242217 91177308-0d34-0410-b5e6-96231b3b80d8
For now the Archive owns the buffers of the thin archive members.
This makes for a simple API, but all the buffers are destructed
only when the archive is destructed. This should be fine since we
close the files after mmap so we should not hit an open file
limit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242215 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG already had begin/end methods for iterating over all
the nodes, but didn't define an iterator_range for us in foreach
loops.
This adds such a method and uses it in some of the eligible places
throughout the backends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242212 91177308-0d34-0410-b5e6-96231b3b80d8
The simplify_type specialisation allows us to cast directly from
SDValue to an SDNode* subclass so we don't need to pass a SDNode*
to cast<>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242209 91177308-0d34-0410-b5e6-96231b3b80d8
This commit moves the function 'printReg' towards the start of the file so that
it can be used by the conversion methods in MIRPrinter and not just the printing
methods in MIPrinter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242203 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes an incidentally created instruction can duplicate a Value used
elsewhere. It then often doesn't end up in the leader table. If it's later
removed, we attempt to remove it from the leader table and segfault.
Instead we should just ignore the removal request, which won't cause any
problems. The reverse situation, where the original instruction is replaced by
the new one (which you might think could leave the leader table empty) cannot
occur, because the incidental instruction will never be found in the first
place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242199 91177308-0d34-0410-b5e6-96231b3b80d8
MOVSDto64rr and MOV64toSDrr are defined to convert between FR64 (%xmm)
<-> GR64 registers, not VR64 (%mm) <-> GR64. This is wrong.
I found this by inspection and could not find a suitable testcase for it
since (1) we don't handle MMX bitcasts in Peephole optimizer as to
generate COPYs that (2) could be expanded back to the appropriate x86
instruction in ExpandPostRA.
Switch to use the appropriate instructions: MMX_MOVD64from64rr and
MMX_MOVD64to64rr here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242191 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC uses itineraries to describe processor pipelines (and dispatch-group
restrictions for P7/P8 cores). Unfortunately, the target-independent
implementation of TII.getInstrLatency calls ItinData->getStageLatency, and that
looks for the largest cycle count in the pipeline for any given instruction.
This, however, yields the wrong answer for the PPC itineraries, because we
don't encode the full pipeline. Because the functional units are fully
pipelined, we only model the initial stages (there are no relevant hazards in
the later stages to model), and so the technique employed by getStageLatency
does not really work. Instead, we should take the maximum output operand
latency, and that's what PPCInstrInfo::getInstrLatency now does.
This caused some test-case churn, including two unfortunate side effects.
First, the new arrangement of copies we get from function parameters now
sometimes blocks VSX FMA mutation (a FIXME has been added to the code and the
test cases), and we have one significant test-suite regression:
SingleSource/Benchmarks/BenchmarkGame/spectral-norm
56.4185% +/- 18.9398%
In this benchmark we have a loop with a vectorized FP divide, and it with the
new scheduling both divides end up in the same dispatch group (which in this
case seems to cause a problem, although why is not exactly clear). The grouping
structure is hard to predict from the bottom of the loop, and there may not be
much we can do to fix this.
Very few other test-suite performance effects were really significant, but
almost all weakly favor this change. However, in light of the issues
highlighted above, I've left the old behavior available via a
command-line flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242188 91177308-0d34-0410-b5e6-96231b3b80d8
Convert logical operations on general-purpose registers to the correspon-
ding operations on predicate registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242186 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change, personality directives were not emitted
if there was no invoke left in the function (of course until
recently this also meant that we couldn't know what
the personality actually was). This patch forces personality directives
to still be emitted, unless it is known to be a noop in the absence of
invokes, or the user explicitly specified `nounwind` (and not
`uwtable`) on the function.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D10884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242185 91177308-0d34-0410-b5e6-96231b3b80d8
This can be done only with moves which theoretically
will optimize better later.
Although this transform increases the instruction count,
it should be code size / cycle count neutral in the worst
VALU case. It also seems to slightly improve a couple
of testcases due to other DAG combines this exposes.
This is probably slightly worse for the SALU case, so
it might be better to handle this during moveToVALU,
although then you lose some simplifications like
the load width reducing in the simple testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242177 91177308-0d34-0410-b5e6-96231b3b80d8
If the read2 produced was supposed to be writing into a
super register, it would use the wrong subregister indices.
Fix this by inserting copies, so we only ever write to a vreg_64.
Run the register coalescer again to clean this up, although this
isn't ideal and often does result in an extra move.
Also remove the assert that offset1 > offset0.
There isn't a real reason to not allow this other than a minor
convenience in the compiler, and it doesn't seem worth the effort
of avoiding it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242174 91177308-0d34-0410-b5e6-96231b3b80d8
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242173 91177308-0d34-0410-b5e6-96231b3b80d8
Do not use MachineRegisterInfo::setPhysRegUsed()/isPhysRegUsed()
anymore. This bitset changes function-global state and is set by the
VirtRegRewriter anyway.
Simply use a bitvector private to RAGreedy.
Differential Revision: http://reviews.llvm.org/D10910
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242169 91177308-0d34-0410-b5e6-96231b3b80d8
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242165 91177308-0d34-0410-b5e6-96231b3b80d8
Generate extract instructions (via intrinsics) before the DAG combiner
folds shifts into unrecognizable forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242163 91177308-0d34-0410-b5e6-96231b3b80d8