Summary:
SpeculativeExecution enables a series straight line optimizations (such
as SLSR and NaryReassociate) on conditional code. For example,
if (...)
... b * s ...
if (...)
... (b + 1) * s ...
speculative execution can hoist b * s and (b + 1) * s from then-blocks,
so that we have
... b * s ...
if (...)
...
... (b + 1) * s ...
if (...)
...
Then, SLSR can rewrite (b + 1) * s to (b * s + s) because after
speculative execution b * s dominates (b + 1) * s.
The performance impact of this change is significant. It speeds up the
benchmarks running EigenFloatContractionKernelInternal16x16
(ba68f42fa6/unsupported/Eigen/CXX11/src/Tensor/TensorContractionCuda.h (cl-526))
by roughly 2%. Some internal benchmarks that have the above code pattern
are improved by up to 40%. No significant slowdowns are observed on
Eigen CUDA microbenchmarks.
Reviewers: jholewinski, broune, eliben
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11201
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242437 91177308-0d34-0410-b5e6-96231b3b80d8
This is a new iteration of the reverted r238793 /
http://reviews.llvm.org/D8232 which wrongly assumed that any and/or
trees can be represented by conditional compare sequences, however there
are some restrictions to that. This version fixes this and adds comments
that explain exactly what types of and/or trees can actually be
implemented as conditional compare sequences.
Related to http://llvm.org/PR20927, rdar://18326194
Differential Revision: http://reviews.llvm.org/D10579
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242436 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We can safely assume that the high bit of scratch offsets will never
be set, because this would require at least 128 GB of GPU memory.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11225
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242433 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r242300.
This is causing buildbot failures which we are investigating.
I'll reapply once we know whats going on, but for now want to
get the bots green.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242428 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes an issue on MIPS where the infinite-loop-evergreen.ll test
was failing to terminate.
Fixes PR24147.
Reviewers: arsenm, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242410 91177308-0d34-0410-b5e6-96231b3b80d8
This allows more call sequences to use pushes instead of movs when optimizing for size.
In particular, calling conventions that pass some parameters in registers (e.g. thiscall) are now supported.
This should no longer cause miscompiles, now that a bug in emitPrologue was fixed in r242395.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242398 91177308-0d34-0410-b5e6-96231b3b80d8
When X86FrameLowering::emitPrologue() looks for where to insert the %esp subtraction
to allocate stack space for local allocations, it assumes that any sequence of push
instructions that starts at function entry consists purely of spills of callee-save
registers.
This may be false, since from some point forward, the pushes may pushing arguments
to a subsequent function call.
This caused a miscompile that was exposed by r240257, and is not easily testable
since r240257 was reverted. A test will be committed separately after r240257 is
reapplied.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242395 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242386 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11079
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242385 91177308-0d34-0410-b5e6-96231b3b80d8
It miscompiles some code and a reduced test case has been sent to the
author.
This reverts commit r240257.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242373 91177308-0d34-0410-b5e6-96231b3b80d8
pairs for 32-bit immediates.
This change is needed to avoid emitting movt/movw pairs when doing LTO
and do so on a per-function basis.
Out-of-tree projects currently using cl::opt option -arm-use-movt=0 or
false to avoid emitting movt/movw pairs should make changes to add
subtarget feature "+no-movt" (see the changes made to clang in r242368).
rdar://problem/21529937
Differential Revision: http://reviews.llvm.org/D11026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242369 91177308-0d34-0410-b5e6-96231b3b80d8
The pass here was clearing kill flags on instructions which had
their sources killed in the instruction being combined. But
given that the new instruction is inserted after the existing ones,
any existing instructions with kill flags will lead to the verifier
complaining that we are reading an undefined physreg.
For example, what we had prior to this optimization is
t2STRi12 %R1, %SP, 12
t2STRi12 %R1<kill>, %SP, 16
t2STRi12 %R0<kill>, %SP, 8
and prior to this fix that would generate
t2STRi12 %R1<kill>, %SP, 16
t2STRDi8 %R0<kill>, %R1, %SP, 8
This is clearly incorrect as it didn't clear the kill flag on R1
used with offset 16 because there was no kill flag on the instruction
with offset 12.
After this change we clear the kill flag on the offset 16 instruction
because we know it will be used afterwards in the new instruction.
I haven't provided a test case. I have a small test, but even it is
very sensitive to register allocation order which isn't ideal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242359 91177308-0d34-0410-b5e6-96231b3b80d8
Pass a const reference to LiveRegMatrix to getRegAllocationHints()
because some targets can prodive better hints if they can test whether a
physreg has been used for register allocation yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242340 91177308-0d34-0410-b5e6-96231b3b80d8
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242300 91177308-0d34-0410-b5e6-96231b3b80d8
The vec_sld interface provides access to the vsldoi instruction.
Unlike most of the vec_* interfaces, we do not attempt to change the
generated code for vec_sld based on the endian mode. It is too
difficult to correctly infer the desired semantics because of
different element types, and the corrected instruction sequence is
expensive, involving loading a permute control vector and performing a
generalized permute.
For GCC, this was implemented as "Don't touch the vec_sld"
implementation. When it came time for the LLVM implementation, I did
the same thing. However, this was hasty and incorrect. In LLVM's
version of altivec.h, vec_sld was previously defined in terms of the
vec_perm interface. Because vec_perm semantics are adjusted for
little endian, this means that leaving vec_sld untouched causes it to
generate something different for LE than for BE. Not good.
This back-end patch accompanies the changes to altivec.h that change
vec_sld's behavior for little endian. Those changes mean that we see
slightly different code in the back end when trying to recognize a
VSLDOI instruction in isVSLDOIShuffleMask. In particular, a
ShuffleKind of 1 (where the two inputs are identical) must now be
treated the same way as a ShuffleKind of 2 (little endian with
different inputs) when little endian mode is in force. This is
because ShuffleKind of 1 is defined using big-endian numbering.
This has a ripple effect on LowerBUILD_VECTOR, where we create our own
internal VSLDOI instructions. Because these are a ShuffleKind of 1,
they will now have their shift amounts subtracted from 16 when
recognizing the shuffle mask. To avoid problems we have to subtract
them from 16 again before creating the VSLDOI instructions.
There are a couple of other uses of BuildVSLDOI, but these do not need
to be modified because the shift amount is 8, which is unchanged when
subtracted from 16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242296 91177308-0d34-0410-b5e6-96231b3b80d8
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242295 91177308-0d34-0410-b5e6-96231b3b80d8
This is a direct port of the code from the X86 backend (r239486/r240361), which
uses the MachineCombiner to reassociate (floating-point) adds/muls to increase
ILP, to the PowerPC backend. The rationale is the same.
There is a lot of copy-and-paste here between the X86 code and the PowerPC
code, and we should extract at least some of this into CodeGen somewhere.
However, I don't want to do that until this code is enhanced to handle FMAs as
well. After that, we'll be in a better position to extract the common parts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242279 91177308-0d34-0410-b5e6-96231b3b80d8
If the source of the copy that defines the addend is a physical register, then
its existing live range may not extend to the FMA being mutated. Make sure we
extend the live range of the register to meet the FMA because it will become
its operand in this case.
I don't have an independent test case, but it will be exposed by change to be
committed shortly enabling the use of the machine combiner to do fadd/fmul
reassociation, and will be covered by one of the associated regression tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242278 91177308-0d34-0410-b5e6-96231b3b80d8
This code was breaking from the case statement if the getStoreSizeInBits()
value was not a multiple of 0. Given that the implementation returns
getStoreSize() * 8, it can only be a multiple of 8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242255 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
processFunctionBeforeCalleeSavedScan was renamed to determineCalleeSaves and now takes a BitVector parameter as of rL242165, reviewed in http://reviews.llvm.org/D10909
WebAssembly is still marked as experimental and therefore doesn't build by default. It does, however, grep by default! I notice that processFunctionBeforeCalleeSavedScan is still mentioned in a few comments and error messages, which I also fixed.
Reviewers: qcolombet, sunfish
Subscribers: jfb, dsanders, hfinkel, MatzeB, llvm-commits
Differential Revision: http://reviews.llvm.org/D11199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242242 91177308-0d34-0410-b5e6-96231b3b80d8
Follow-up r235483, with the corresponding support in PPC. We use a regular call
for symbolic targets (because they're much cheaper than indirect calls).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242239 91177308-0d34-0410-b5e6-96231b3b80d8
We used to take the address specified as the direct target of the patchpoint
and did no TOC-pointer handling. This, however, as not all that useful,
because MCJIT tends to create a lot of modules, and they have their own TOC
sections. Thus, to call from the generated code to other generated code, you
really need to switch TOC pointers. Make this work as expected, and under
ELFv1, tread the address as the function descriptor address so that the correct
TOC pointer can be loaded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242217 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG already had begin/end methods for iterating over all
the nodes, but didn't define an iterator_range for us in foreach
loops.
This adds such a method and uses it in some of the eligible places
throughout the backends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242212 91177308-0d34-0410-b5e6-96231b3b80d8
MOVSDto64rr and MOV64toSDrr are defined to convert between FR64 (%xmm)
<-> GR64 registers, not VR64 (%mm) <-> GR64. This is wrong.
I found this by inspection and could not find a suitable testcase for it
since (1) we don't handle MMX bitcasts in Peephole optimizer as to
generate COPYs that (2) could be expanded back to the appropriate x86
instruction in ExpandPostRA.
Switch to use the appropriate instructions: MMX_MOVD64from64rr and
MMX_MOVD64to64rr here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242191 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC uses itineraries to describe processor pipelines (and dispatch-group
restrictions for P7/P8 cores). Unfortunately, the target-independent
implementation of TII.getInstrLatency calls ItinData->getStageLatency, and that
looks for the largest cycle count in the pipeline for any given instruction.
This, however, yields the wrong answer for the PPC itineraries, because we
don't encode the full pipeline. Because the functional units are fully
pipelined, we only model the initial stages (there are no relevant hazards in
the later stages to model), and so the technique employed by getStageLatency
does not really work. Instead, we should take the maximum output operand
latency, and that's what PPCInstrInfo::getInstrLatency now does.
This caused some test-case churn, including two unfortunate side effects.
First, the new arrangement of copies we get from function parameters now
sometimes blocks VSX FMA mutation (a FIXME has been added to the code and the
test cases), and we have one significant test-suite regression:
SingleSource/Benchmarks/BenchmarkGame/spectral-norm
56.4185% +/- 18.9398%
In this benchmark we have a loop with a vectorized FP divide, and it with the
new scheduling both divides end up in the same dispatch group (which in this
case seems to cause a problem, although why is not exactly clear). The grouping
structure is hard to predict from the bottom of the loop, and there may not be
much we can do to fix this.
Very few other test-suite performance effects were really significant, but
almost all weakly favor this change. However, in light of the issues
highlighted above, I've left the old behavior available via a
command-line flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242188 91177308-0d34-0410-b5e6-96231b3b80d8
Convert logical operations on general-purpose registers to the correspon-
ding operations on predicate registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242186 91177308-0d34-0410-b5e6-96231b3b80d8
This can be done only with moves which theoretically
will optimize better later.
Although this transform increases the instruction count,
it should be code size / cycle count neutral in the worst
VALU case. It also seems to slightly improve a couple
of testcases due to other DAG combines this exposes.
This is probably slightly worse for the SALU case, so
it might be better to handle this during moveToVALU,
although then you lose some simplifications like
the load width reducing in the simple testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242177 91177308-0d34-0410-b5e6-96231b3b80d8
If the read2 produced was supposed to be writing into a
super register, it would use the wrong subregister indices.
Fix this by inserting copies, so we only ever write to a vreg_64.
Run the register coalescer again to clean this up, although this
isn't ideal and often does result in an extra move.
Also remove the assert that offset1 > offset0.
There isn't a real reason to not allow this other than a minor
convenience in the compiler, and it doesn't seem worth the effort
of avoiding it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242174 91177308-0d34-0410-b5e6-96231b3b80d8
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242173 91177308-0d34-0410-b5e6-96231b3b80d8
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242165 91177308-0d34-0410-b5e6-96231b3b80d8
Generate extract instructions (via intrinsics) before the DAG combiner
folds shifts into unrecognizable forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242163 91177308-0d34-0410-b5e6-96231b3b80d8
