This patch adds support for v8i16 and v16i8 shuffle lowering using the immediate versions of the SSE4A EXTRQ and INSERTQ instructions. Although rather limited (they can only act on the lower 64-bits of the source vectors, leave the upper 64-bits of the result vector undefined and don't have VEX encoded variants), the instructions are still useful for the zero extension of any lane (EXTRQ) or inserting a lane into another vector (INSERTQ). Testing demonstrated that it wasn't typically worth it to use these instructions for v2i64 or v4i32 vector shuffles although they are capable of it.
As well as adding specific pattern matching for the shuffles, the patch uses EXTRQ for zero extension cases where SSE41 isn't available and its more efficient than the SSE2 'unpack' default approach. It also adds shuffle decode support for the EXTRQ / INSERTQ cases when the instructions are handling full byte-sized extractions / insertions.
From this foundation, future patches will be able to make use of the instructions for situations that use their ability to extract/insert at the bit level.
Differential Revision: http://reviews.llvm.org/D10146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241508 91177308-0d34-0410-b5e6-96231b3b80d8
With the completion of D9746 there is now a common implementation of integer signed/unsigned min/max nodes, removing the need for the equivalent X86 specific implementations.
This patch removes the old X86ISD nodes, legalizes the relevant SSE2/SSE41/AVX2/AVX512 instructions for the ISD versions and converts the small amount of existing X86 code.
Differential Revision: http://reviews.llvm.org/D10947
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241506 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a 'run-pass' option to llc, which instructs the compiler to run
one specific code generation pass only.
Llc already has the 'start-after' and the 'stop-after' options, and this new
option complements the other two by making it easier to write tests that want
to invoke a single pass only.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10776
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241476 91177308-0d34-0410-b5e6-96231b3b80d8
Running this after the scheduler enables scheduling
waits later so other ALU instructions can run while
this would be waiting.
When combined with enabling the post-RA scheduler, this
gives about a ~20% improvement on sgemm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241473 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This concludes the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
At this point, the StringRef-form of GNU Triples should only be used in the
public API (including IR serialization) and a couple objects that directly
interact with the API (most notably the Module class). The next step is to
replace these Triple objects with the TargetTuple object that will represent
our authoratative/unambiguous internal equivalent to GNU Triples.
Reviewers: rengolin
Subscribers: llvm-commits, jholewinski, ted, rengolin
Differential Revision: http://reviews.llvm.org/D10962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241472 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have a good way to detect most situations where
DS offsets are usable on SI, so add an option to force using
them even if unsafe for debugging performance problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241462 91177308-0d34-0410-b5e6-96231b3b80d8
The code in AArch64A57FPLoadBalancing::scavengeRegister() to handle dead defs
was not correctly handling aliased registers. E.g. if the dead def was of D2,
then S2 was not being marked as unavailable, so it could potentially be used
across a live-range in which it would be clobbered.
Patch by Geoff Berry <gberry@codeaurora.org>!
Phabricator: http://reviews.llvm.org/D10900
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241449 91177308-0d34-0410-b5e6-96231b3b80d8
From the linker's perspective, an available_externally global is equivalent
to an external declaration (per isDeclarationForLinker()), so it is incorrect
to consider it to be a weak definition.
Also clean up some logic in the dead argument elimination pass and clarify
its comments to better explain how its behavior depends on linkage,
introduce GlobalValue::isStrongDefinitionForLinker() and start using
it throughout the optimizers and backend.
Differential Revision: http://reviews.llvm.org/D10941
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241413 91177308-0d34-0410-b5e6-96231b3b80d8
There is some functional change here because it changes target code from
atoi(3) to StringRef::getAsInteger which has error checking. For valid
constraints there should be no difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241411 91177308-0d34-0410-b5e6-96231b3b80d8
Followup to D10433 and D10589 that fixes i8/i16 uint2fp vector conversions by zero extending to i32 and using the sint2fp path (unless the target does actually support uint2fp).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241394 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for sign extension for sub 128-bit vectors, such as to v2i32. It concatenates with UNDEF subvectors up to 128-bits, performs the sign extension (i.e. as v4i32) and then extracts the target subvector.
Patch 1/2 of D10589 - the second patch covers the conversion of v2i8/v2i16 to v2f64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241323 91177308-0d34-0410-b5e6-96231b3b80d8
This function can really fail since the string table offset can be out of
bounds.
Using ErrorOr makes sure the error is checked.
Hopefully a lot of the boilerplate code in tools/* can go away once we have
a diagnostic manager in Object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241297 91177308-0d34-0410-b5e6-96231b3b80d8
In r241285, I removed the SUBREG_TO_REG restriction from VSX swap
removal, determining that this was overly conservative. We have
another form of the same restriction in that we check for the presence
of implicit subregs in vector operations. As with SUBREG_TO_REG for
partial register conversions, an implicit subreg is safe in and of
itself, provided no other operation makes a lane-sensitive assumption
about the result. This patch removes that restriction, by removing
the HasImplicitSubreg flag and all code that relies on it.
I've added a test case that fails to optimize before this patch is
applied, and optimizes properly with the patch. Test based on a
report from Anton Blanchard.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241290 91177308-0d34-0410-b5e6-96231b3b80d8
With a previous patch, the VSX swap optimization is able to recognize
the doubleword load-splat idiom that can be implemented using lxvdsx.
However, that does not cover a doubleword splat where the source is a
register. We can implement this using xxspltd (a special form of
xxpermdi). This patch teaches the swap optimization pass about this
idiom.
As a prerequisite, it also permits swap optimization to succeed for
all forms of SUBREG_TO_REG. Previously we were conservative and only
allowed SUBREG_TO_REG when it copied a full register. However, on
reflection any form of SUBREG_TO_REG is safe in and of itself, so long
as an unsafe operation is not performed on its result. In particular,
a widening SUBREG_TO_REG often occurs as an input to a doubleword
splat idiom, particularly in auto-vectorized code.
The doubleword splat idiom is an XXPERMDI operation where both source
registers are identical, and the selection mask is either 0 (splat the
first element) or 3 (splat the second element). To determine whether
the registers are identical, we use the existing mechanism for looking
through "copy-like" operations. That mechanism has a side effect of
marking the XXPERMDI operation as using a physical register, which
would invalidate its presence in a swap-optimized region. This is
correct for the form of XXPERMDI that performs a swap and hence would
be removed, but is not what we want for a doubleword-splat variety of
XXPERMDI. Therefore we reset the physical-register flag on the
XXPERMDI when it represents a splat.
A simple test case is added to verify that we generate the splat and
that we also remove the xxswapd instructions that would otherwise be
associated with the load and store of another operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241285 91177308-0d34-0410-b5e6-96231b3b80d8
This checks subtarget feature compatibility for inlining by verifying
that the callee is a strict subset of the caller's features. This includes
the cpu as part of the subtarget we can get via the incoming functions as
the backend takes CPUs as feature sets.
This allows us to inline things like:
int foo() { return baz(); }
int __attribute__((target("sse4.2"))) bar() {
return foo();
}
so that generic code can be inlined into specialized functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241221 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
* Add 64-bit address space feature.
* Rename SIMD feature to SIMD128.
* Handle single-thread model with an IR pass (same way ARM does).
* Rename generic processor to MVP, to follow design's lead.
* Add bleeding-edge processors, with all features included.
* Fix a few DEBUG_TYPE to match other backends.
Test Plan: ninja check
Reviewers: sunfish
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D10880
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241211 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
According to PTX ISA:
For convenience, ld, st, and cvt instructions permit source and destination data operands to be wider than the instruction-type size, so that narrow values may be loaded, stored, and converted using regular-width registers. For example, 8-bit or 16-bit values may be held directly in 32-bit or 64-bit registers when being loaded, stored, or converted to other types and sizes. The operand type checking rules are relaxed for bit-size and integer (signed and unsigned) instruction types; floating-point instruction types still require that the operand type-size matches exactly, unless the operand is of bit-size type.
So, the ISA does not support load with extending/store with truncatation for floating numbers. This is reflected in setting the loadext/truncstore actions to expand in the code for floating numbers, but vectors of floating numbers are not taken care of.
As a result, loading a vector of floats followed by a fp_extend may be combined by DAGCombiner to a extload, and the extload may be lowered to NVPTXISD::LoadV2 with extending information. However, NVPTXISD::LoadV2 does not perform extending, and no extending instructions are inserted. Finally, PTX instructions with mismatched types are generated, like
ld.v2.f32 {%fd3, %fd4}, [%rd2]
This patch adds the correct actions for vectors of floats, so DAGCombiner would not create loads with extending, and correct code is generated.
Patched by Gang Hu.
Test Plan: Test case attached.
Reviewers: jingyue
Reviewed By: jingyue
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D10876
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241191 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Offset of frame index is calculated by NVPTXPrologEpilogPass. Before
that the correct offset of stack objects cannot be obtained, which
leads to wrong offset if there are more than 2 frame objects. This patch
move NVPTXPeephole after NVPTXPrologEpilogPass. Because the frame index
is already replaced by %VRFrame in NVPTXPrologEpilogPass, we check
VRFrame register instead, and try to remove the VRFrame if there
is no usage after NVPTXPeephole pass.
Patched by Xuetian Weng.
Test Plan:
Strengthened test/CodeGen/NVPTX/local-stack-frame.ll to check the
offset calculation based on SP and SPL.
Reviewers: jholewinski, jingyue
Reviewed By: jingyue
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D10853
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241185 91177308-0d34-0410-b5e6-96231b3b80d8
When adding little-endian vector support for PowerPC last year, I
inadvertently disabled an optimization that recognizes a load-splat
idiom and generates the lxvdsx instruction. This patch moves the
offending logic so lxvdsx is once again generated.
This pattern is frequently generated by the vectorizer for scalar
loads of an effective constant. Previously the lxvdsx instruction was
wrongly listed as lane-sensitive for the VSX swap optimization (since
both doublewords are identical, swaps are safe). This patch fixes
this as well, so that vectorized code using lxvdsx can now have swaps
removed from the computation.
There is an existing test (@test50) in test/CodeGen/PowerPC/vsx.ll
that checks for the missing optimization. However, vsx.ll was only
being tested for POWER7 with big-endian code generation. I've added
a little-endian RUN statement and expected LE code generation for all
the tests in vsx.ll to give us a bit better VSX coverage, including
what's needed for this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241183 91177308-0d34-0410-b5e6-96231b3b80d8
The EH code might have been deleted as unreachable and the personality
pruned while the filter is still present. Currently I'm hitting this at
-O0 due to the clang bug PR24009.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241170 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the AsmParser to accept add/adds/sub/subs/cmp/cmn
with a negative immediate operand and convert them as shown:
add Rd, Rn, -imm -> sub Rd, Rn, imm
sub Rd, Rn, -imm -> add Rd, Rn, imm
adds Rd, Rn, -imm -> subs Rd, Rn, imm
subs Rd, Rn, -imm -> adds Rd, Rn, imm
cmp Rn, -imm -> cmn Rn, imm
cmn Rn, -imm -> cmp Rn, imm
Those instructions are an alternate syntax available to assembly coders,
and are needed in order to support code already compiling with some other
assemblers (gas). They are documented in the "ARMv8 Instruction Set
Overview", in the "Arithmetic (immediate)" section. This makes llvm-mc
a programmer-friendly assembler !
This also fixes PR20978: "Assembly handling of adding negative numbers
not as smart as gas".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241166 91177308-0d34-0410-b5e6-96231b3b80d8
Only consider an instruction a candidate for relaxation if the last operand of the
instruction is an expression. We previously checked whether any operand is an expression,
which is useless, since for all instructions concerned, the only operand that may be
affected by relaxation is the last one.
In addition, this removes the check for having RIP as an argument, since it was
plain wrong - even when one of the arguments is RIP, relaxation may still be needed.
This fixes PR9807.
Patch by: david.l.kreitzer@intel.com
Differential Revision: http://reviews.llvm.org/D10766
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241152 91177308-0d34-0410-b5e6-96231b3b80d8
The incoming EBP value established by the runtime is actually a pointer
to the end of the EH registration object, and not the true parent
function frame pointer. Clang doesn't need llvm.x86.seh.exceptioninfo
anymore because we know that the exception info pointer is at a fixed
offset from this incoming EBP.
The llvm.x86.seh.recoverfp intrinsic takes an EBP value provided by the
EH runtime and returns a pointer that is usable with llvm.framerecover.
The llvm.x86.seh.restoreframe intrinsic is inserted by the 32-bit
specific preparation pass in blocks targetted by the EH runtime. It
re-establishes any physical registers used by the parent function to
address the stack, such as the frame, base, and stack pointers.
Neither of these intrinsics correctly handle stack realignment prologues
yet, but it's possible to add that later.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D10848
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241125 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Really check if %SP is not used in other places, instead of checking only exact
one non-dbg use.
Patched by Xuetian Weng.
Test Plan:
@foo4 in test/CodeGen/NVPTX/local-stack-frame.ll, create a case that
SP will appear twice.
Reviewers: jholewinski, jingyue
Reviewed By: jingyue
Subscribers: llvm-commits, sfantao, jholewinski
Differential Revision: http://reviews.llvm.org/D10844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241099 91177308-0d34-0410-b5e6-96231b3b80d8
Duplicating an FP register "as itself" is a bad idea, since it violates the
invariant that every FP register is mapped to at most one FPU stack slot.
Use the scratch FP register instead.
This fixes PR23957.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241069 91177308-0d34-0410-b5e6-96231b3b80d8
Realistically, this will be returning ErrorOr for some time as refactoring the
user code to check once per section will take some time.
Given that, use it for checking if a relocation has addend or not.
While at it, add ELFRelocationRef to simplify the users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241028 91177308-0d34-0410-b5e6-96231b3b80d8
This change unifies how LTOModule and the backend obtain linker flags
for globals: via a new TargetLoweringObjectFile member function named
emitLinkerFlagsForGlobal. A new function LTOModule::getLinkerOpts() returns
the list of linker flags as a single concatenated string.
This change affects the C libLTO API: the function lto_module_get_*deplibs now
exposes an empty list, and lto_module_get_*linkeropts exposes a single element
which combines the contents of all observed flags. libLTO should never have
tried to parse the linker flags; it is the linker's job to do so. Because
linkers will need to be able to parse flags in regular object files, it
makes little sense for libLTO to have a redundant mechanism for doing so.
The new API is compatible with the old one. It is valid for a user to specify
multiple linker flags in a single pragma directive like this:
#pragma comment(linker, "/defaultlib:foo /defaultlib:bar")
The previous implementation would not have exposed
either flag via lto_module_get_*deplibs (as the test in
TargetLoweringObjectFileCOFF::getDepLibFromLinkerOpt was case sensitive)
and would have exposed "/defaultlib:foo /defaultlib:bar" as a single flag via
lto_module_get_*linkeropts. This may have been a bug in the implementation,
but it does give us a chance to fix the interface.
Differential Revision: http://reviews.llvm.org/D10548
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241010 91177308-0d34-0410-b5e6-96231b3b80d8
When the store sequence being combined actually stores the base register, we
should not mark it as killed until the end.
rdar://21504262
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241003 91177308-0d34-0410-b5e6-96231b3b80d8
This is a new version of http://reviews.llvm.org/D10260.
It turned out that when you specify an integer register in inline asm on
x86 you get the register of the required type size back. That means that
X86TargetLowering::getRegForInlineAsmConstraint() has to accept any of
the integer registers and adapt its size to the given target size which
may be any 8/16/32/64 bit sized type. Surprisingly that means given a
constraint of "{ax}" and a type of MVT::F32 we need to return X86::EAX.
This change makes this face explicit, the previous code seemed like
working by accident because there it never returned an error once a
register was found. On the other hand this rewrite allows to actually
return errors for invalid situations like requesting an integer register
for an i128 type.
Related to rdar://21042280
Differential Revision: http://reviews.llvm.org/D10813
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241002 91177308-0d34-0410-b5e6-96231b3b80d8
Some of the the permissible ARM -mfpu options, which are supported in GCC,
are currently not present in llvm/clang.This patch adds the options:
'neon-fp16', 'vfpv3-fp16', 'vfpv3-d16-fp16', 'vfpv3xd' and 'vfpv3xd-fp16.
These are related to half-precision floating-point and single precision.
Reviewers: rengolin, ranjeet.singh
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10645
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously it (incorrectly) used GPR's.
Patch by Simon Dardis. A couple small corrections by myself.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10567
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240883 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some front ends make kernel pointers global already. In that case,
handlePointerParams does nothing.
Test Plan: more tests in lower-kernel-ptr-arg.ll
Reviewers: grosser
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D10779
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240849 91177308-0d34-0410-b5e6-96231b3b80d8
If pseudoToMCOpcode failed, we would return the original opcode, so operands
would be swapped, but the instruction would remain the same.
It resulted in LSHLREV a, b ---> LSHLREV b, a.
This fixes Glamor text rendering and
piglit/arb_sample_shading-builtin-gl-sample-mask on VI.
This is a candidate for stable branches.
v2: the test was simplified by Tom Stellard
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240824 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r240793 while fixing how we handle array constant
pool entries.
This fixes PR23966.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240811 91177308-0d34-0410-b5e6-96231b3b80d8
SDNode already had ops() which would iterate over the operands and return
SDUse*. This version instead gets the SDValue's out of the SDUse's so that
we can use foreach in more places.
Reviewed by David Blaikie.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240805 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the error in ARM.td which stated that Cortex-R5
floating point unit can do only single precision, when it can do double as well.
Reviewers: rengolin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240799 91177308-0d34-0410-b5e6-96231b3b80d8
It seems to have caused PR23966: "UNREACHABLE executed at ..\lib\Target\X86\X86TargetObjectFile.cpp:148"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240793 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This only adds support for ULW of an immediate address with/without a source register.
It does not include support for ULW of the address of a symbol.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9663
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240782 91177308-0d34-0410-b5e6-96231b3b80d8
Cortex-R4F TRM states that fpu supports both single and double precision.
This patch corrects the information in ARM.td file and corresponding test.
Reviewers: rengolin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10763
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240776 91177308-0d34-0410-b5e6-96231b3b80d8
A number of places had explicit loops over Constant::operands().
Just use foreach loops where possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240694 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Simplify emitDirectiveModuleFP() by having it just print the current information
from MipsABIFlagsSection and doing an updateABIInfo() before such calls.
This prevents us from forgetting to update the STI.FeatureBits,
because updateABIInfo() uses those to update the MipsABIFlagsSection object,
and also makes sure we use the update mechanism from MipsABIFlagsSection.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, mpf
Differential Revision: http://reviews.llvm.org/D10642
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240637 91177308-0d34-0410-b5e6-96231b3b80d8
As pointed out by Justin Bogner (see r240520), SystemZDAGToDAGISel::Select
currently attempts to convert boolean operations into RxSBG even on some
non-integer types (in particular, vector types). This would not work in
any case, and it happened to trigger undefined behaviour in allOnes.
This patch verifies that we have a (<= 64-bit) integer type before
attempting to perform this optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240634 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We can simplify emitDirectiveModuleOddSPReg() by having it print the current OddSPReg information
from MipsABIFlagsSection and doing an updateABIInfo() before such calls.
This prevents us from forgetting to update the STI.FeatureBits, because updateABIInfo() uses those to update the MipsABIFlagsSection object,
and also makes sure we use the update mechanism from MipsABIFlagsSection.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, mpf
Differential Revision: http://reviews.llvm.org/D10641
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240630 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In an expression such as "(((a+b)+c)+d)", parseParenExpression() would only parse the "a+b)+c", which would result in an error later on in the parser.
This means that we can only parse one level of inner parentheses.
In order to fix this, I added a new function called parseParenExprOfDepth(), which parses a specified number of trailing parenthesis expressions
(except for the outermost parenthesis), and changed MipsAsmParser to use it in parseMemOffset instead of parseParenExpression().
Reviewers: dsanders, rafael
Reviewed By: dsanders, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240625 91177308-0d34-0410-b5e6-96231b3b80d8
We don't always have FMA, for example when using 'clang -mavx512f'
without an explicit CPU.
Also check for an explicit +avx512f instead of CPUs in a couple
related tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240616 91177308-0d34-0410-b5e6-96231b3b80d8
Summary
This change turns on the emission of
__LLVM_Stackmaps section when generating COFF binaries.
Test Plan
Added a scenario to the test case:
test\CodeGen\X86\statepoint-stackmap-format.ll.
Code Review:
http://reviews.llvm.org/D10680
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240613 91177308-0d34-0410-b5e6-96231b3b80d8
- Deciding that insn->sibIndex is SIB_INDEX_NONE does not require another
check beyond the fully decoded bits being equal to 0x4.
The expression insn->sibIndex == SIB_INDEX_sib could not have been true unless
index were 0x4, because SIB_INDEX_sib is merely the range base (SIB_INDEX_EAX)
plus 4. Respectively SIB_INDEX_sib64.
- Don't use a switch statement to perform left-shift.
Differential Revision: http://reviews.llvm.org/D9762
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240598 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch first change the register that holds local address for stack
frame to %SPL. Then the new NVPTXPeephole pass will try to scan the
following pattern
%vreg0<def> = LEA_ADDRi64 <fi#0>, 4
%vreg1<def> = cvta_to_local %vreg0
and transform it into
%vreg1<def> = LEA_ADDRi64 %VRFrameLocal, 4
Patched by Xuetian Weng
Test Plan: test/CodeGen/NVPTX/local-stack-frame.ll
Reviewers: jholewinski, jingyue
Reviewed By: jingyue
Subscribers: eliben, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D10549
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240587 91177308-0d34-0410-b5e6-96231b3b80d8
COFF and MachO only define symbol sizes for common symbols. Reflect that
in the class hierarchy by having a method for common symbols only in the base
and a general one in ELF.
This avoids the need of using a magic value for the size, which had a few
problems
* Most callers didn't check for it.
* The ones that did could not tell the magic value from a file actually having
that value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240529 91177308-0d34-0410-b5e6-96231b3b80d8
This stops shifting a 32-bit value by such absurd amounts as 96 and
120. We do this by dropping a call to the function that was doing this
entirely, which rather surprisingly doesn't break *any* tests.
I've also added an assert in the misbehaving function to prove that
it's no longer being called with completely invalid arguments.
This change looks pretty bogus and we should probably be reverting
r238692 instead, but this is hard to do with the number of follow ups
that have happened since. It can't be any worse than the undefined
behaviour that was happening before though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240526 91177308-0d34-0410-b5e6-96231b3b80d8
This allOnes function hits undefined behaviour if Count is greater
than 64, but we can avoid that and simplify the calculation by just
saturating if such a value is passed in.
This comes up under ubsan becauseRxSBGOperands is sometimes created
with values that are 128 bits wide. Somebody more familiar with this
code should probably look into whether that's expected, as a 64 bit
mask may or may not be appropriate for such types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240520 91177308-0d34-0410-b5e6-96231b3b80d8
We used to erroneously match:
(v4i64 shuffle (v2i64 load), <0,0,0,0>)
Whereas vbroadcasti128 is more like:
(v4i64 shuffle (v2i64 load), <0,1,0,1>)
This problem doesn't exist for vbroadcastf128, which kept matching
the intrinsic after r231182. We should perhaps re-introduce the
intrinsic here as well, but that's a separate issue still being
discussed.
While there, add some proper vbroadcastf128 tests. We don't currently
match those, like for loading vbroadcastsd/ss on AVX (the reg-reg
broadcasts where added in AVX2).
Fixes PR23886.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240488 91177308-0d34-0410-b5e6-96231b3b80d8
When UpdateBaseRegUses sees an instruction that defines the base
register it must stop, as the base register value it is updating is no
longer live. Ideally we would already have seen the register be killed
(which is already checked for), but the kill flags may be inaccurate
and we have to account for this.
Differential Revision: http://reviews.llvm.org/D10566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240424 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This only adds support for ULHU of an immediate address with/without a source register.
It does not include support for ULHU of the address of a symbol.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9671
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240410 91177308-0d34-0410-b5e6-96231b3b80d8
So far, LLVM has not emitted correct addend for N64 and N32 ABI. This patch
fixes that. It also removes fixup from MCJIT for R_MIPS_PC16 relocation.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D10565
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240404 91177308-0d34-0410-b5e6-96231b3b80d8
The summary is that it moves the mangling earlier and replaces a few
calls to .addExternalSymbol with addSym.
I originally wanted to replace all the uses of addExternalSymbol with
addSym, but noticed it was a lot of work and doesn't need to be done
all at once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240395 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid shifting a negative value by sign-extending after the shift.
Fixes a couple of tests that were failing under ubsan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240381 91177308-0d34-0410-b5e6-96231b3b80d8
Currently ( D10321, http://reviews.llvm.org/rL239486 ), we can use the machine combiner pass
to reassociate the following sequence to reduce the critical path:
A = ? op ?
B = A op X
C = B op Y
-->
A = ? op ?
B = X op Y
C = A op B
'op' is currently limited to x86 AVX scalar FP adds (with fast-math on), but in theory, it could
be any associative math/logic op (see TODO in code comment).
This patch generalizes the pattern match to ignore the instruction that defines 'A'. So instead of
a sequence of 3 adds, we now only need to find 2 dependent adds and decide if it's worth
reassociating them.
This generalization has a compile-time cost because we can now match more instruction sequences
and we rely more heavily on the machine combiner to discard sequences where reassociation doesn't
improve the critical path.
For example, in the new test case:
A = M div N
B = A add X
C = B add Y
We'll match 2 reassociation patterns, but this transform doesn't reduce the critical path:
A = M div N
B = A add Y
C = B add X
We need the combiner to reject that pattern but select this:
A = M div N
B = X add Y
C = B add A
Differential Revision: http://reviews.llvm.org/D10460
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240361 91177308-0d34-0410-b5e6-96231b3b80d8
The _Int instructions are special, in that they operate on the full
VR128 instead of FR32. The load folding then looks at MOVSS, at the
user, and bails out when it sees a size mismatch.
What we really know is that the rm_Int instructions don't load the
higher lanes, so folding is fine.
This happens for the straightforward intrinsic code, e.g.:
_mm_add_ss(a, _mm_load_ss(p));
Fixes PR23349.
Differential Revision: http://reviews.llvm.org/D10554
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240326 91177308-0d34-0410-b5e6-96231b3b80d8
According to the documentation, .thumb_set is 'the equivalent of a .set directive'.
We didn't have equivalent behaviour in terms of all the errors we could throw, for
example, when a symbol is redefined.
This change refactors parseAssignment so that it can be used by .set and .thumb_set
and implements tests for .thumb_set for all the errors thrown by that method.
Reviewed by Rafael Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240318 91177308-0d34-0410-b5e6-96231b3b80d8
D8982 ( checked in at http://reviews.llvm.org/rL239001 ) added command-line
options to allow reciprocal estimate instructions to be used in place of
divisions and square roots.
This patch changes the default settings for x86 targets to allow that recip
codegen (except for scalar division because that breaks too much code) when
using -ffast-math or its equivalent.
This matches GCC behavior for this kind of codegen.
Differential Revision: http://reviews.llvm.org/D10396
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240310 91177308-0d34-0410-b5e6-96231b3b80d8
Before this we were producing a TargetExternalSymbol from a MCSymbol.
That meant extracting the symbol name and fetching the symbol again
down the pipeline.
This patch adds a DAG.getMCSymbol that lets the MCSymbol pass unchanged on the
DAG.
Doing so removes the need for MO_NOPREFIX and fixes the root cause of pr23900,
allowing r240130 to be committed again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240300 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: In this case, we're supposed to load the immediate in AT and then ADDu it with the source register and put it in the destination register.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9367
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240278 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In this case, we're supposed to load the address of the symbol in AT and then ADDu it with the source register and
put it in the destination register.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9366
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240273 91177308-0d34-0410-b5e6-96231b3b80d8
This allows more call sequences to use pushes instead of movs when optimizing for size.
In particular, calling conventions that pass some parameters in registers (e.g. thiscall) are now supported.
Differential Revision: http://reviews.llvm.org/D10500
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240257 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes getRelocationAddend to use ErrorOr and considers it an error
to try to get the addend of a REL section.
If, for example, a x86_64 file has a REL section, that file is corrupted and
we should reject it.
Using ErrorOr is not ideal since we check the section type once per relocation
instead of once per section.
Checking once per section would involve getRelocationAddend just asserting and
callers checking the section before iterating over the relocations.
In any case, this is an improvement and includes a test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240176 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240137 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, we canonicalize shuffles that produce a result larger than
their operands with:
shuffle(concat(v1, undef), concat(v2, undef))
->
shuffle(concat(v1, v2), undef)
because we can access quad vectors (see PerformVECTOR_SHUFFLECombine).
This is useful in the general case, but there are special cases where
native shuffles produce larger results: the two-result ops.
We can look through the concat when lowering them:
shuffle(concat(v1, v2), undef)
->
concat(VZIP(v1, v2):0, :1)
This lets us generate the native shuffles instead of scalarizing to
dozens of VMOVs.
Differential Revision: http://reviews.llvm.org/D10424
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240118 91177308-0d34-0410-b5e6-96231b3b80d8
In preparation for a future patch: makes it easier to do the same
matching to generate different nodes, without duplication.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240116 91177308-0d34-0410-b5e6-96231b3b80d8
Deduplicates some code and lets us use LEA on atom when adjusting the
stack around callee-cleanup calls. This is the only intended
functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240044 91177308-0d34-0410-b5e6-96231b3b80d8
They had been getting emitted as a section + offset reference, which
is bogus since the value needs to be the offset within the GOT, not
the actual address of the symbol's object.
Differential Revision: http://reviews.llvm.org/D10441
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240020 91177308-0d34-0410-b5e6-96231b3b80d8
Added explicit sign extension for v4i16/v8i16 to v4i32/v8i32 before conversion to floats. Matches existing support for v4i8/v8i8.
Follow up to D10433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239966 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is done by first adding two additional instructions to convert the
alloca returned address to local and convert it back to generic. Then
replace all uses of alloca instruction with the converted generic
address. Then we can rely NVPTXFavorNonGenericAddrSpace pass to combine
the generic addresscast and the corresponding Load, Store, Bitcast, GEP
Instruction together.
Patched by Xuetian Weng (xweng@google.com).
Test Plan: test/CodeGen/NVPTX/lower-alloca.ll
Reviewers: jholewinski, jingyue
Reviewed By: jingyue
Subscribers: meheff, broune, eliben, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D10483
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239964 91177308-0d34-0410-b5e6-96231b3b80d8
There is a one-to-one relationship between X86Subtarget and
X86FrameLowering, but every frame lowering method would previously pull
the subtarget off the MachineFunction and query some subtarget
properties.
Over time, these locals began to grow in complexity and it became
important to keep their names and meaning in sync across all of the
frame lowering methods, leading to duplication. We can eliminate that
duplication by computing them once in the constructor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239948 91177308-0d34-0410-b5e6-96231b3b80d8
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239940 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This does not include support for the immediate variants of these pseudo-instructions.
Fixes llvm.org/PR20968.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D8537
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239905 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Call MCSymbolRefExpr::create() with a MCSymbol* argument, not with a StringRef
of the Symbol's name, in order to avoid creating invalid temporary symbols for
relative labels (e.g. {$,.L}tmp00, {$,.L}tmp10 etc.).
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10498
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239901 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, MCSymbolRefExpr::create() was called with a StringRef of the symbol
name, which it would then search for in the Symbols StringMap (from MCContext).
However, relative labels (which are temporary symbols) are apparently not stored
in the Symbols StringMap, so we end up creating a new {$,.L}tmp symbol
({$,.L}tmp00, {$,.L}tmp10 etc.) each time we create an MCSymbolRefExpr by
passing in the symbol name as a StringRef.
Fortunately, there is a version of MCSymbolRefExpr::create() which takes an
MCSymbol* and we already have an MCSymbol* at that point, so we can just pass
that in instead of the StringRef.
I also removed the local StringRef calls to MCSymbolRefExpr::create() from
expandMemInst(), as those cases can be handled by evaluateRelocExpr() anyway.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9938
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239897 91177308-0d34-0410-b5e6-96231b3b80d8
that it is its own entity in the form of MemoryLocation, and update all
the callers.
This is an entirely mechanical change. References to "Location" within
AA subclases become "MemoryLocation", and elsewhere
"AliasAnalysis::Location" becomes "MemoryLocation". Hope that helps
out-of-tree folks update.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239885 91177308-0d34-0410-b5e6-96231b3b80d8
The patch triggers a miscompile on SPEC 2006 403.gcc with the (ref)
200.i and scilab.i inputs. I opened PR23866 to track analysis of this.
This reverts commit r238793.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239880 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables support for the conversion of v2i32 to v2f64 to use the CVTDQ2PD xmm instruction and stay on the SSE unit instead of scalarizing, sign extending to i64 and using CVTSI2SDQ scalar conversions.
Differential Revision: http://reviews.llvm.org/D10433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239855 91177308-0d34-0410-b5e6-96231b3b80d8
Old names, new names, and what they really mean:
- IsWin64 -> IsWin64CC: This is true on non-Windows x86_64 platforms
when the ms_abi calling convention is used.
- IsWinEH -> IsWin64Prologue: True when the target is Win64, regardless
of calling convention. Changes the prologue to obey the constraints of
the Win64 unwinder.
- NeedsWinEH -> NeedsWinCFI: We're using the win64 prologue *and* the we
want .xdata unwind tables. Analogous to NeedsDwarfCFI.
NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239836 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Relocs that can be converted from absolute to PC-relative now do so if IsPCRel
is true. Relocs that require PC-relative now call llvm_unreachable() if IsPCRel
is false and similarly those that require absolute assert that IsPCRel is false.
Note that while it looks like some relocs (e.g. R_MIPS_26) can be converted into
the MIPS32r6/MIPS64r6 relocs (R_MIPS_PC*_S2), it isn't actually valid to do so.
Placeholders have been left in the testcase for unsupported relocs and relocs
that cannot be generated at the moment.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits, rafael
Differential Revision: http://reviews.llvm.org/D10184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239817 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10381
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239815 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This affects other tools so the previous C++ API has been retained as a
deprecated function for the moment. Clang has been updated with a trivial
patch (not covered by the pre-commit review) to avoid breaking -Werror builds.
Other in-tree tools will be fixed with similar patches.
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
The first time this was committed it accidentally fixed an inconsistency in
triples in llvm-mc and this caused a failure. This inconsistency was fixed in
r239808.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10366
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239812 91177308-0d34-0410-b5e6-96231b3b80d8
When we multiply two 64-bit vectors, we extract lower and upper part and use the PMULUDQ instruction.
When one of the operands is a constant, the upper part may be zero, we know this at compile time.
Example: %a = mul <4 x i64> %b, <4 x i64> < i64 5, i64 5, i64 5, i64 5>.
I'm checking the value of the upper part and prevent redundant "multiply", "shift" and "add" operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239802 91177308-0d34-0410-b5e6-96231b3b80d8
These are really immediate DUPs, and suffer from the same problem
with long instructions with a high/2 variant (e.g. smull).
By extending a MOVI (or DUP, before this patch), we can avoid an ext
on the other operand of the long instruction, e.g. turning:
ext.16b v0, v0, v0, #8
movi.4h v1, #0x53
smull.4s v0, v0, v1
into:
movi.8h v1, #0x53
smull2.4s v0, v0, v1
While there, add a now-necessary combine to fold (VT NVCAST (VT x)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239799 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the safe stack instrumentation pass to LLVM, which separates
the program stack into a safe stack, which stores return addresses, register
spills, and local variables that are statically verified to be accessed
in a safe way, and the unsafe stack, which stores everything else. Such
separation makes it much harder for an attacker to corrupt objects on the
safe stack, including function pointers stored in spilled registers and
return addresses. You can find more information about the safe stack, as
well as other parts of or control-flow hijack protection technique in our
OSDI paper on code-pointer integrity (http://dslab.epfl.ch/pubs/cpi.pdf)
and our project website (http://levee.epfl.ch).
The overhead of our implementation of the safe stack is very close to zero
(0.01% on the Phoronix benchmarks). This is lower than the overhead of
stack cookies, which are supported by LLVM and are commonly used today,
yet the security guarantees of the safe stack are strictly stronger than
stack cookies. In some cases, the safe stack improves performance due to
better cache locality.
Our current implementation of the safe stack is stable and robust, we
used it to recompile multiple projects on Linux including Chromium, and
we also recompiled the entire FreeBSD user-space system and more than 100
packages. We ran unit tests on the FreeBSD system and many of the packages
and observed no errors caused by the safe stack. The safe stack is also fully
binary compatible with non-instrumented code and can be applied to parts of
a program selectively.
This patch is our implementation of the safe stack on top of LLVM. The
patches make the following changes:
- Add the safestack function attribute, similar to the ssp, sspstrong and
sspreq attributes.
- Add the SafeStack instrumentation pass that applies the safe stack to all
functions that have the safestack attribute. This pass moves all unsafe local
variables to the unsafe stack with a separate stack pointer, whereas all
safe variables remain on the regular stack that is managed by LLVM as usual.
- Invoke the pass as the last stage before code generation (at the same time
the existing cookie-based stack protector pass is invoked).
- Add unit tests for the safe stack.
Original patch by Volodymyr Kuznetsov and others at the Dependable Systems
Lab at EPFL; updates and upstreaming by myself.
Differential Revision: http://reviews.llvm.org/D6094
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239761 91177308-0d34-0410-b5e6-96231b3b80d8
This commit connects the machine function analysis pass (which creates machine
functions) to the MIR parser, which will initialize the machine functions
with the state from the MIR file and reconstruct the machine IR.
This commit introduces a new interface called 'MachineFunctionInitializer',
which can be used to provide custom initialization for the machine functions.
This commit also introduces a new diagnostic class called
'DiagnosticInfoMIRParser' which is used for MIR parsing errors.
This commit modifies the default diagnostic handling in LLVMContext - now the
the diagnostics are printed directly into llvm::errs() so that the MIR parsing
errors can be printed with colours.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9928
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239753 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
NFC: no one uses AnalyzeBranchPredicate yet.
Add TargetInstrInfo::AnalyzeBranchPredicate and implement for x86. A
later change adding support for page-fault based implicit null checks
depends on this.
Reviewers: reames, ab, atrick
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239742 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
TargetInstrInfo::getLdStBaseRegImmOfs to
TargetInstrInfo::getMemOpBaseRegImmOfs and implement for x86. The
implementation only handles a few easy cases now and will be made more
sophisticated in the future.
This is NFCI: the only user of `getLdStBaseRegImmOfs` (now
`getmemOpBaseRegImmOfs`) is `LoadClusterMotion` and `LoadClusterMotion`
is disabled for x86.
Reviewers: reames, ab, MatzeB, atrick
Reviewed By: MatzeB, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239741 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This instruction encodes a loading operation that may fault, and a label
to branch to if the load page-faults. The locations of potentially
faulting loads and their "handler" destinations are recorded in a
FaultMap section, meant to be consumed by LLVM's clients.
Nothing generates FAULTING_LOAD_OP instructions yet, but they will be
used in a future change.
The documentation (FaultMaps.rst) needs improvement and I will update
this diff with a more expanded version shortly.
Depends on D10196
Reviewers: rnk, reames, AndyAyers, ab, atrick, pgavlin
Reviewed By: atrick, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239740 91177308-0d34-0410-b5e6-96231b3b80d8
