The problem this patch addresses is the handling of register tie
constraints in AsmMatcherEmitter, where one operand is tied to a
sub-operand of another operand. The typical scenario for this to
happen is the tie between the "write-back" register of a pre-inc
instruction, and the base register sub-operand of the memory address
operand of that instruction.
The current AsmMatcherEmitter code attempts to handle tied
operands by emitting the operand as usual first, and emitting
a CVT_Tied node when handling the second (tied) operand. However,
this really only works correctly if the tied operand does not
have sub-operands (and isn't a sub-operand itself). Under those
circumstances, a wrong MC operand list is generated.
In discussions with Jim Grosbach, it turned out that the MC operand
list really ought not to contain tied operands in the first place;
instead, it ought to consist of exactly those operands that are
named in the AsmString. However, getting there requires significant
rework of (some) targets.
This patch fixes the immediate problem, and at the same time makes
one (small) step in the direction of the long-term solution, by
implementing two changes:
1. Restricts the AsmMatcherEmitter handling of tied operands to
apply solely to simple operands (not complex operands or
sub-operand of such).
This means that at least we don't get silently corrupt MC operand
lists as output. However, if we do have tied sub-operands, they
would now no longer be handled at all, except for:
2. If we have an operand that does not occur in the AsmString,
and also isn't handled as tied operand, simply emit a dummy
MC operand (constant 0).
This works as long as target code never attempts to access
MC operands that do no not occur in the AsmString (and are
not tied simple operands), which happens to be the case for
all targets where this situation can occur (ARM and PowerPC).
[ Note that this change means that many of the ARM custom
converters are now superfluous, since the implement the
same "hack" now performed already by common code. ]
Longer term, we ought to fix targets to never access *any*
MC operand that does not occur in the AsmString (including
tied simple operands), and then finally completely remove
all such operands from the MC operand list.
Patch approved by Jim Grosbach.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180677 91177308-0d34-0410-b5e6-96231b3b80d8
When Reassociator optimize "(x | C1)" ^ "(X & C2)", it may swap the two
subexpressions, however, it forgot to swap cached constants (of C1 and C2)
accordingly.
rdar://13739160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180676 91177308-0d34-0410-b5e6-96231b3b80d8
The CodeGen aspects of this test are already covered by cfi-frame.ll;
making it an assembly file reduces the risk of incidental changes
affecting the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180671 91177308-0d34-0410-b5e6-96231b3b80d8
Mainly adding paranoid checks for the closing brace of a function to
help with FileCheck error readability. Also some other minor changes.
No actual CHECK changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180668 91177308-0d34-0410-b5e6-96231b3b80d8
This seems to me an obvious place to allow target passes to annotate
memory operations. There are plenty of bits, and I'm not aware of
another good way for early target passes to propagate hints along to
later passes. Target independent transforms can simply preserve them,
the way they preserve the other flags. Like MachineMemOperands in
general, if the target flags are lost we must still generate correct
code.
This has lots of uses, but I want this flexibility now to make it
easier to work with the new MachineTraceMetrics
analysis. MachineTraceMetrics can gather a lot of information about
instructions based on the surrounding code. This information can be
used to influence postRA machine passes that don't work on SSA form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180666 91177308-0d34-0410-b5e6-96231b3b80d8
to determine whether or not we're on a darwin platform for debug code
emitting.
Solves the problem of a module with no triple on the command line
and no triple in the module using non-gdb ok features on darwin. Fix
up the member-pointers test to check the correct things for cross
platform (DW_FORM_flag is a good prefix).
Unfortunately no testcase because I have no ideas how to test something
without a triple and without a triple in the module yet check
precisely on two platforms. Ideas welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180660 91177308-0d34-0410-b5e6-96231b3b80d8
We switch the order of offset and field type to make TBAAStructType node
(name, parent node, offset) similar to scalar TBAA node (name, parent node).
TypeIsImmutable is added to TBAAStructTag node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180654 91177308-0d34-0410-b5e6-96231b3b80d8
Clarify documentation and API to make the difference between register and
register-indirect addressed locations more explicit. Put in a comment
to point out that with the current implementation we cannot specify
a register-indirect location with offset 0 (a breg 0 in DWARF).
No functionality change intended.
rdar://problem/13658587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180641 91177308-0d34-0410-b5e6-96231b3b80d8
TLVs probably won't be as common as the other types of variables. Check for them
last before defaulting to "DATA".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180631 91177308-0d34-0410-b5e6-96231b3b80d8
For Mach-O there were 2 implementations for parsing object files. A
standalone llvm/Object/MachOObject.h and llvm/Object/MachO.h which
implements the generic interface in llvm/Object/ObjectFile.h.
This patch adds the missing features to MachO.h, moves macho-dump to
use MachO.h and removes ObjectFile.h.
In addition to making sure that check-all is clean, I checked that the
new version produces exactly the same output in all Mach-O files in a
llvm+clang build directory (including executables and shared
libraries).
To test the performance, I ran macho-dump over all the files in a
llvm+clang build directory again, but this time redirecting the output
to /dev/null. Both the old and new versions take about 4.6 seconds
(2.5 user) to finish.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180624 91177308-0d34-0410-b5e6-96231b3b80d8
We need to intialize this to something and since clang does not set
the shader type attribute and clang is used only for compute shaders,
initializing it to COMPUTE seems like the best choice.
Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180620 91177308-0d34-0410-b5e6-96231b3b80d8
"hint" space for Thumb actually overlaps the encoding space of the CPS
instruction. In actuality, hints can be defined as CPS instructions where imod
and M bits are all nil.
Handle decoding of permitted nop-compatible hints (i.e. nop, yield, wfi, wfe,
sev) in DecodeT2CPSInstruction.
This commit adds a proper diagnostic message for Imm0_4 and updates all tests.
Patch by Mihail Popa <Mihail.Popa@arm.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180617 91177308-0d34-0410-b5e6-96231b3b80d8
Since we can't guarantee that the original dbg.declare instrinsic
is removed by LowerDbgDeclare(), we need to make sure that we are
not inserting the same dbg.value intrinsic over and over.
This removes tons of redundant DIEs when compiling optimized code.
rdar://problem/13056109
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180615 91177308-0d34-0410-b5e6-96231b3b80d8
In the default PowerPC assembler syntax, registers are specified simply
by number, so they cannot be distinguished from immediate values (without
looking at the opcode). This means that the default operand matching logic
for the asm parser does not work, and we need to specify custom matchers.
Since those can only be specified with RegisterOperand classes and not
directly on the RegisterClass, all instructions patterns used by the asm
parser need to use a RegisterOperand (instead of a RegisterClass) for
all their register operands.
This patch adds one RegisterOperand for each RegisterClass, using the
same name as the class, just in lower case, and updates all instruction
patterns to use RegisterOperand instead of RegisterClass operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180611 91177308-0d34-0410-b5e6-96231b3b80d8
When testing the asm parser, I noticed wrong encodings for the
above instructions (wrong sub-opcodes).
Tests will be added together with the asm parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180608 91177308-0d34-0410-b5e6-96231b3b80d8
When testing the asm parser, I noticed wrong encodings for the
above instructions (wrong sub-opcodes). Note that apparently
the compiler currently never generates pre-inc instructions
for floating point types for some reason ...
Tests will be added together with the asm parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180607 91177308-0d34-0410-b5e6-96231b3b80d8
When testing the asm parser, I noticed wrong encodings for the
above instructions (wrong operand name in rldimi, wrong form
and sub-opcode for rldcl).
Tests will be added together with the asm parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180606 91177308-0d34-0410-b5e6-96231b3b80d8
When testing the asm parser, I ran into an error when using a conditional
branch to an external symbol (this doesn't occur in compiler-generated
code) due to missing support in PPCELFObjectWriter::getRelocTypeInner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180605 91177308-0d34-0410-b5e6-96231b3b80d8
This already helps SSE2 x86 a lot because it lacks an efficient way to
represent a vector select. The long term goal is to enable the backend to match
a canonicalized pattern into a single instruction (e.g. vabs or pabs).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180597 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r180222.
I think this might tie in with a different problem which will require a
different approach potentially. I am reverting this in the case I need to go
down that second path.
My apologies for the noise. = /.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180590 91177308-0d34-0410-b5e6-96231b3b80d8
It makes more sense to have git-svnup here than catting said file in the
documentation (where we should rather point users to this directory).
I included git-svnrevert as an additional gift to the community. I will update
the documentation in a second commit later today.
git-svnrevert takes in a git hash for a commit, looks up the svn revision for
said commit and then creates the normal git revert commit message with the one
liner message, except instead of saying
Revert "<<<INSERT ONELINER HERE>>>"
This reverts commit <<<INSERT GITHASH HERE>>>
It says:
Revert "<<<INSERT ONELINER HERE>>>"
This reverts commit r<<<INSERT SVN REVISION HERE>>>
so git hashes will not escape into our svn logs (which just look unseemly).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180587 91177308-0d34-0410-b5e6-96231b3b80d8
Mips have delayslots for certain instructions
like jumps and branches. These are instructions
that follow the branch or jump and are executed
before the jump or branch is completed.
Early Mips compilers could not cope with delayslots
and left them up to the assembler. The assembler would
fill the delayslots with the appropriate instruction,
usually just a nop to allow correct runtime behavior.
The default behavior for this is set with .set reorder.
To tell the assembler that you don't want it to mess with
the delayslot one used .set noreorder.
For backwards compatibility we need to support
.set reorder and have it be the default behavior in the
assembler.
Our support for it is to insert a NOP directly after an
instruction with a delayslot when in .set reorder mode.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180584 91177308-0d34-0410-b5e6-96231b3b80d8
Pattern has source location by itself. After adding a trivial method to
retrieve it, it's unnecessary to pair a source location for CHECK-NOT patterns.
One thing revised after this is the diagnostic info is more accurate by
pointing to the start of the CHECK-NOT pattern instead of the end of the
CHECK-NOT pattern. E.g. diagnostic message previously looks like
<stdin>:1:1: error: CHECK-NOT: string occurred!
test
^
test.txt:1:16: note: CHECK-NOT: pattern specified here
CHECK-NOT: test
^
is changed to
<stdin>:1:1: error: CHECK-NOT: string occurred!
test
^
test.txt:1:12: note: CHECK-NOT: pattern specified here
CHECK-NOT: test
^
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180578 91177308-0d34-0410-b5e6-96231b3b80d8
