Adds a flag to the MemorySanitizer pass that enables runtime rewriting of
indirect calls. This is part of MSanDR implementation and is needed to return
control to the DynamiRio-based helper tool on transition between instrumented
and non-instrumented modules. Disabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191006 91177308-0d34-0410-b5e6-96231b3b80d8
When selecting the DAG (add (WrapperRIP ...), (FrameIndex ...)), X86 code had
spotted the FrameIndex possibility and was working out whether it could fold
the WrapperRIP into this.
The test for forming a %rip version is notionally whether we already have a
base or index register (%rip precludes both), but we were forgetting to account
for the register that would be inserted later to access the frame.
rdar://problem/15024520
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190995 91177308-0d34-0410-b5e6-96231b3b80d8
1) make sure that the first two instructions of the sequence cannot
separate from each other. The linker requires that they be sequential.
If they get separated, it can still work but it will not work in all
cases because the first of the instructions mostly involves the hi part
of the pc relative offset and that part changes slowly. You would have
to be at the right boundary for this to matter.
2) make sure that this sequence begins on a longword boundary.
There appears to be a bug in binutils which makes some of these calculations
get messed up if the instruction sequence does not begin on a longword
boundary. This is being investigated with the appropriate binutils folks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190966 91177308-0d34-0410-b5e6-96231b3b80d8
Use the DIVariable::isIndirect() flag set by the frontend instead of
guessing whether to set the machine location's indirection bit.
Paired commit with CFE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190961 91177308-0d34-0410-b5e6-96231b3b80d8
XCore target: Add XCoreTargetTransformInfo
This is where getNumberOfRegisters() resides, which in turn returns the
number of vector registers (=0).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190936 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason I never got around to adding these at the same time as
the signed versions. No idea why.
I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether
it should just be replaced with an "is normal" flag. I'll leave that
for later though.
There are some boundary conditions that can be tweaked, such as preferring
unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256",
but again I'll leave those for a separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190930 91177308-0d34-0410-b5e6-96231b3b80d8
If address space 0 was smaller than the address space
in a constant inttoptr/ptrtoint pair, the wrong mask size
would be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190899 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We indicate that the object files are safe by emitting a @feat.00
absolute address symbol. The address is presumably interpreted as a
bitfield of features that the compiler would like to enable. Bit 0 is
documented in the PE COFF spec to opt in to "registered SEH", which is
what /safeseh enables.
LLVM's object files are safe by default because LLVM doesn't know how to
produce SEH handlers.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1691
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190898 91177308-0d34-0410-b5e6-96231b3b80d8
To avoid regressions with bitfield optimizations, this slicing should take place
later, like ISel time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190891 91177308-0d34-0410-b5e6-96231b3b80d8
In particular, this means we emit non-external symbols defined to
variables, such as aliases or absolute addresses.
This is needed to implement /safeseh, and it appears there was some
confusion about what symbols to emit previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190888 91177308-0d34-0410-b5e6-96231b3b80d8
Some of this code is no longer necessary since int<->ptr casts are no
longer occur as of r187444.
This also fixes handling vectors of pointers, and adds a bunch of new
testcases for vectors and address spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190885 91177308-0d34-0410-b5e6-96231b3b80d8
Large code model on PPC64 requires creating and referencing TOC entries when
using the addis/ld form of addressing. This was not being done in all cases.
The changes in this patch to PPCAsmPrinter::EmitInstruction() fix this. Two
test cases are also modified to reflect this requirement.
Fast-isel was not creating correct code for loading floating-point constants
using large code model. This also requires the addis/ld form of addressing.
Previously we were using the addis/lfd shortcut which is only applicable to
medium code model. One test case is modified to reflect this requirement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190882 91177308-0d34-0410-b5e6-96231b3b80d8
Upcoming SLP vectorization improvements will want to be able to estimate costs
of horizontal reductions. Add infrastructure to support this.
We model reductions as a series of (shufflevector,add) tuples ultimately
followed by an extractelement. For example, for an add-reduction of <4 x float>
we could generate the following sequence:
(v0, v1, v2, v3)
\ \ / /
\ \ /
+ +
(v0+v2, v1+v3, undef, undef)
\ /
((v0+v2) + (v1+v3), undef, undef)
%rdx.shuf = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 2, i32 3, i32 undef, i32 undef>
%bin.rdx = fadd <4 x float> %rdx, %rdx.shuf
%rdx.shuf7 = shufflevector <4 x float> %bin.rdx, <4 x float> undef,
<4 x i32> <i32 1, i32 undef, i32 undef, i32 undef>
%bin.rdx8 = fadd <4 x float> %bin.rdx, %rdx.shuf7
%r = extractelement <4 x float> %bin.rdx8, i32 0
This commit adds a cost model interface "getReductionCost(Opcode, Ty, Pairwise)"
that will allow clients to ask for the cost of such a reduction (as backends
might generate more efficient code than the cost of the individual instructions
summed up). This interface is excercised by the CostModel analysis pass which
looks for reduction patterns like the one above - starting at extractelements -
and if it sees a matching sequence will call the cost model interface.
We will also support a second form of pairwise reduction that is well supported
on common architectures (haddps, vpadd, faddp).
(v0, v1, v2, v3)
\ / \ /
(v0+v1, v2+v3, undef, undef)
\ /
((v0+v1)+(v2+v3), undef, undef, undef)
%rdx.shuf.0.0 = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 0, i32 2 , i32 undef, i32 undef>
%rdx.shuf.0.1 = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 1, i32 3, i32 undef, i32 undef>
%bin.rdx.0 = fadd <4 x float> %rdx.shuf.0.0, %rdx.shuf.0.1
%rdx.shuf.1.0 = shufflevector <4 x float> %bin.rdx.0, <4 x float> undef,
<4 x i32> <i32 0, i32 undef, i32 undef, i32 undef>
%rdx.shuf.1.1 = shufflevector <4 x float> %bin.rdx.0, <4 x float> undef,
<4 x i32> <i32 1, i32 undef, i32 undef, i32 undef>
%bin.rdx.1 = fadd <4 x float> %rdx.shuf.1.0, %rdx.shuf.1.1
%r = extractelement <4 x float> %bin.rdx.1, i32 0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190876 91177308-0d34-0410-b5e6-96231b3b80d8
We can't insert an insertelement after an invoke. We would have to split a
critical edge. So when we see a phi node that uses an invoke we just give up.
radar://14990770
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190871 91177308-0d34-0410-b5e6-96231b3b80d8
other in memory.
The motivation was to get rid of truncate and shift right instructions that get
in the way of paired load or floating point load.
E.g.,
Consider the following example:
struct Complex {
float real;
float imm;
};
When accessing a complex, llvm was generating a 64-bits load and the imm field
was obtained by a trunc(lshr) sequence, resulting in poor code generation, at
least for x86.
The idea is to declare that two load instructions is the canonical form for
loading two arithmetic type, which are next to each other in memory.
Two scalar loads at a constant offset from each other are pretty
easy to detect for the sorts of passes that like to mess with loads.
<rdar://problem/14477220>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190870 91177308-0d34-0410-b5e6-96231b3b80d8
When a truncate node defines a legal vector type but uses an illegal
vector type, the legalization process was splitting the vector until
<1 x vector> type, but then it was failing to scalarize the node because
it did not know how to handle TRUNCATE.
<rdar://problem/14989896>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190830 91177308-0d34-0410-b5e6-96231b3b80d8
A DBG_VALUE is register-indirect iff the first operand is a register
_and_ the second operand is an immediate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190821 91177308-0d34-0410-b5e6-96231b3b80d8
- check that -mcpu=slm uses the call register indirect optimization
- check that -mcpu=slm runs the scheduler
- check that -mcpu=slm supports the movbe instruction
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190814 91177308-0d34-0410-b5e6-96231b3b80d8
We would have to compute the pre increment value, either by computing it on
every loop iteration or by splitting the edge out of the loop and inserting a
computation for it there.
For now, just give up vectorizing such loops.
Fixes PR17179.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190790 91177308-0d34-0410-b5e6-96231b3b80d8
The port originally had special patterns for extload, mapping them to the
same instructions as sextload. It seemed neater to have patterns that
match "an extension that is allowed to be signed" and "an extension that
is allowed to be unsigned".
This was originally meant to be a clean-up, but it does improve the handling
of promoted integers a little, as shown by args-06.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190777 91177308-0d34-0410-b5e6-96231b3b80d8
This is a re-commit of r190764, with an extra check to make sure that we're not
performing the transformation on illegal types (a small test case has been
added for this as well).
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190771 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The '?' flag uses the last section group if the last had a section
group. We treat combining an explicit section group and the '?' as a
hard error.
This fixes PR17198.
Reviewers: rafael, bkramer
Reviewed By: bkramer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190768 91177308-0d34-0410-b5e6-96231b3b80d8
For alignment purposes, the instruction array will always have an even
number of entries, with the final entry potentially unused (in which
case the array will be one longer than indicated by the count of unwind
codes field).
Reviewed by Anton Korobeynikov, Charles Davis and Nico Rieck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190767 91177308-0d34-0410-b5e6-96231b3b80d8
data structures.
The Win64 EH data structures must be of type IMAGE_REL_AMD64_ADDR32NB
instead of IMAGE_REL_AMD64_ADDR32. This is easiely achieved by adding
the VK_COFF_IMGREL32 modifier to the symbol reference.
Change also references to start and end of the SEH range of a function
as offsets to start of the function.
Reviewed by Jim Grosbach, Charles Davis and Nico Rieck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190766 91177308-0d34-0410-b5e6-96231b3b80d8
This is causing test-suite failures.
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190765 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190764 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::isAlias can be called with SrcValue1 or SrcValue2 null, and we
can't use AA in this case (if we try, then the casting code in AA will assert).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190763 91177308-0d34-0410-b5e6-96231b3b80d8
