Summary:
The tests in this directory are intended to test a single IR instruction
with as few dependencies on other instructions as possible. The aim is to
be very confident that each LLVM-IR instruction is implemented correctly and
with the optimal sequence of instructions, as well as to make it easy to tell
what is tested, and make it easier to bring up new ISA revisions in the
future. This gives us a good foundation on which to test bigger things.
These particular tests will allow testing that MIPS32r6/MIPS64r6 generate
the correct return instruction for returns, calls, and indirect branches.
This will be a bit tricky since the assembly text is identical but the
instruction is actually different. On MIPS32r6/MIPS64r6 'jr $rs' has been
removed in favour of the equivalent 'jalr $zero, $rs'. 'jr $rs' remains as
an alias for 'jalr $zero, $rs'.
Differential Revision: http://reviews.llvm.org/D4266
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212345 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for functions that are not actually available externally but
referenced by a vtable of some kind. Clang emits functions like this for the MS
ABI.
PR20182.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212337 91177308-0d34-0410-b5e6-96231b3b80d8
The linker relies on relocation type info (e.g. is it a branch?) to perform the
correct actions, so we should keep that even when we end up using a scattered
relocation for whatever reason.
rdar://problem/17553104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212333 91177308-0d34-0410-b5e6-96231b3b80d8
There were two issues here:
1. At the very least, scattered relocations cannot use the same code to
determine the corresponding symbol being referred to. For some reason we
pretend there is no symbol, even when one actually exists in the symtab, so to
match this behaviour getRelocationSymbol should simply return symbols_end for
scattered relocations.
2. Printing "-" when we can't get a symbol (including the scattered case, but
not exclusively), isn't that helpful. In both cases there *is* interesting
information in that field, so we should print it. As hex will do.
Small part of rdar://problem/17553104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212332 91177308-0d34-0410-b5e6-96231b3b80d8
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212330 91177308-0d34-0410-b5e6-96231b3b80d8
any constant, constant FP, or undef splat and to tolerate any undef
lanes in a splat, then replace all uses of isSplatVector in X86's
lowering with it.
This fixes issues where undef lanes in an otherwise splat vector would
prevent the splat logic from firing. It is a touch more awkward to use
this interface, but it is much more accurate. Suggestions for better
interface structuring welcome.
With this fix, the code generated with the widening legalization
strategy for widen_cast-4.ll is *dramatically* improved as the special
lowering strategies for a v16i8 SRA kick in even though the high lanes
are undef.
We also get a slightly different choice for broadcasting an aligned
memory location, and use vpshufd instead of vbroadcastss. This looks
like a minor win for pipelining and domain crossing, but a minor loss
for the number of micro-ops. I suspect its a wash, but folks can easily
tweak the lowering if they want.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212324 91177308-0d34-0410-b5e6-96231b3b80d8
Silvermont can only decode one instruction per cycle if the instruction exceeds 8 bytes.
Also in Silvermont instructions with more than 3 prefixes will cause 3 cycle penalty.
Maximum nop length is limited to 7 bytes when used for padding on Silvermont.
For other x86 processors max nop length remains unchanged 15 bytes.
Differential Revision: http://reviews.llvm.org/D4374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212321 91177308-0d34-0410-b5e6-96231b3b80d8
When INT_MIN is the numerator in a sdiv, we would not properly handle
overflow when calculating the bounds of possible values; abs(INT_MIN) is
not a meaningful number.
Instead, check and handle INT_MIN by reasoning that the largest value is
INT_MIN/-2 and the smallest value is INT_MIN.
This fixes PR20199.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212307 91177308-0d34-0410-b5e6-96231b3b80d8
This patch:
1) Improves the cost model for x86 alternate shuffles (originally
added at revision 211339);
2) Teaches the Cost Model Analysis pass how to analyze alternate shuffles.
Alternate shuffles are a special kind of blend; on x86, we can often
easily lowered alternate shuffled into single blend
instruction (depending on the subtarget features).
The existing cost model didn't take into account subtarget features.
Also, it had a couple of "dead" entries for vector types that are never
legal (example: on x86 types v2i32 and v2f32 are not legal; those are
always either promoted or widened to 128-bit vector types).
The new x86 cost model takes into account what target features we have
before returning the shuffle cost (i.e. the number of instructions
after the blend is lowered/expanded).
This patch also teaches the Cost Model Analysis how to identify and analyze
alternate shuffles (i.e. 'SK_Alternate' shufflevector instructions):
- added function 'isAlternateVectorMask';
- added some logic to check if an instruction is a alternate shuffle and, in
case, call the target specific TTI to get the corresponding shuffle cost;
- added a test to verify the cost model analysis on alternate shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212296 91177308-0d34-0410-b5e6-96231b3b80d8
symbol’s name. On darwin the -j flag is used (often in combinations
with other flags) to produce a complete list of symbol names which
than can then be reorder and used with ld(1)’s -order_file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212294 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds tablegen patterns to select F16C float-to-half-float
conversion instructions from 'f32_to_f16' and 'f16_to_f32' dag nodes.
If the target doesn't have F16C, then 'f32_to_f16' and 'f16_to_f32'
are expanded into library calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212293 91177308-0d34-0410-b5e6-96231b3b80d8
This should allow llvm-ar to be used instead of gnu ar + plugin in a LTO
build. I will add a release note about it once I finish a LTO bootstrap with it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212287 91177308-0d34-0410-b5e6-96231b3b80d8
Adds support for __builtin_arm_isb. Also corrects DSB and ISB instructions
modelling by adding has-side-effects property.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212276 91177308-0d34-0410-b5e6-96231b3b80d8
This patch sets the 'KeepReg' bit for any tied and live registers during the PrescanInstruction() phase of the dependency breaking algorithm. It then checks those 'KeepReg' bits during the ScanInstruction() phase to avoid changing any tied registers. For more details, please see comments in:
http://llvm.org/bugs/show_bug.cgi?id=20020
I added two FIXME comments for code that I think can be removed by using register iterators that include self. I don't want to include those code changes with this patch, however, to keep things as small as possible.
The test case is larger than I'd like, but I don't know how to reduce it further and still produce the failing asm.
Differential Revision: http://reviews.llvm.org/D4351
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212275 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC 128-bit long double data type (ppcf128 in LLVM) is in fact a
pair of two doubles, where one is considered the "high" or
more-significant part, and the other is considered the "low" or
less-significant part. When a ppcf128 value is stored in memory or a
register pair, the high part always comes first, i.e. at the lower
memory address or in the lower-numbered register, and the low part
always comes second. This is true both on big-endian and little-endian
PowerPC systems. (Similar to how with a complex number, the real part
always comes first and the imaginary part second, no matter the byte
order of the system.)
This was implemented incorrectly for little-endian systems in LLVM.
This commit fixes three related issues:
- When printing an immediate ppcf128 constant to assembler output
in emitGlobalConstantFP, emit the high part first on both big-
and little-endian systems.
- When lowering a ppcf128 type to a pair of f64 types in SelectionDAG
(which is used e.g. when generating code to load an argument into a
register pair), use correct low/high part ordering on little-endian
systems.
- In a related issue, because lowering ppcf128 into a pair of f64 must
operate differently from lowering an int128 into a pair of i64,
bitcasts between ppcf128 and int128 must not be optimized away by the
DAG combiner on little-endian systems, but must effect a word-swap.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212274 91177308-0d34-0410-b5e6-96231b3b80d8
With this change all values passed through blacklisted functions
become fully initialized. Previous behavior was to initialize all
loads in blacklisted functions, but apply normal shadow propagation
logic for all other operation.
This makes blacklist applicable in a wider range of situations.
It also makes code for blacklisted functions a lot shorter, which
works as yet another workaround for PR17409.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212268 91177308-0d34-0410-b5e6-96231b3b80d8
This operation was classified as a binary operation in the widening
logic for some reason (clearly, untested). It is in fact a unary
operation. Add a RUN line to a test to exercise this for x86.
Note that again the vector widening strategy doesn't regress anything
and in one case removes a totally unecessary instruction that we
couldn't avoid when promoting the element type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212257 91177308-0d34-0410-b5e6-96231b3b80d8
mode.
This also runs the test in that mode which would reproduce the crash.
What I love is that *every single FIXME* in the test is addressed by
switching to widening.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212254 91177308-0d34-0410-b5e6-96231b3b80d8
vector type legalization strategies in a more fine grained manner, and
change the legalization of several v1iN types and v1f32 to be widening
rather than scalarization on AArch64.
This fixes an assertion failure caused by scalarizing nodes like "v1i32
trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32.
This also provides a foundation for other targets to have more granular
control over how vector types are legalized.
Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow
some work to start taking place on top of this patch as it adds some
really important hooks to the backend that I'd like to immediately start
using. =]
http://reviews.llvm.org/D4322
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212242 91177308-0d34-0410-b5e6-96231b3b80d8
This includes assembler and codegen support (see the new tests in
avx512-encodings.s and avx512-shuffle.ll).
<rdar://problem/17492620>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212221 91177308-0d34-0410-b5e6-96231b3b80d8
Originally committed in r211723, reverted in r211724 due to failure
cases found and fixed (ArgumentPromotion: r211872, Inlining: r212065),
committed again in r212085 and reverted again in r212089 after fixing
some other cases, such as debug info subprogram lists not keeping track
of the function they represent (r212128) and then short-circuiting
things like LiveDebugVariables that build LexicalScopes for functions
that might not have full debug info.
And again, I believe the invariant actually holds for some reasonable
amount of code (but I'll keep an eye on the buildbots and see what
happens... ).
Original commit message:
PR20038: DebugInfo: Inlined call sites where the caller has debug info
but the call itself has no debug location.
This situation does bad things when inlined, so I've fixed Clang not to
produce inlinable call sites without locations when the caller has debug
info (in the one case where I could find that this occurred). This
updates the PR20038 test case to be what clang now produces, and readds
the assertion that had to be removed due to this bug.
I've also beefed up the debug info verifier to help diagnose these
issues in the future, and I hope to add checks to the inliner to just
assert-fail if it encounters this situation. If, in the future, we
decide we have to cope with this situation, the right thing to do is
probably to just remove all the DebugLocs from the inlined instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212205 91177308-0d34-0410-b5e6-96231b3b80d8
If a function isn't actually in a CU's subprogram list in the debug info
metadata, ignore all the DebugLocs and don't try to build scopes, track
variables, etc.
While this is possibly a minor optimization, it's also a correctness fix
for an incoming patch that will add assertions to LexicalScopes and the
debug info verifier to ensure that all scope chains lead to debug info
for the current function.
Fix up a few test cases that had broken/incomplete debug info that could
violate this constraint.
Add a test case where this occurs by design (inlining a
debug-info-having function in an attribute nodebug function - we want
this to work because /if/ the nodebug function is then inlined into a
debug-info-having function, it should be fine (and will work fine - we
just stitch the scopes up as usual), but should the inlining not happen
we need to not assert fail either).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212203 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commits r212189 and r212190.
While this pass was accidentally disabled (until r212073), r205437
slipped in a use of `auto` that should have been `auto&`.
This fixes PR20188.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212201 91177308-0d34-0410-b5e6-96231b3b80d8
See https://code.google.com/p/address-sanitizer/issues/detail?id=299 for the
original feature request.
Introduce llvm.asan.globals metadata, which Clang (or any other frontend)
may use to report extra information about global variables to ASan
instrumentation pass in the backend. This metadata replaces
llvm.asan.dynamically_initialized_globals that was used to detect init-order
bugs. llvm.asan.globals contains the following data for each global:
1) source location (file/line/column info);
2) whether it is dynamically initialized;
3) whether it is blacklisted (shouldn't be instrumented).
Source location data is then emitted in the binary and can be picked up
by ASan runtime in case it needs to print error report involving some global.
For example:
0x... is located 4 bytes to the right of global variable 'C::array' defined in '/path/to/file:17:8' (0x...) of size 40
These source locations are printed even if the binary doesn't have any
debug info.
This is an ABI-breaking change. ASan initialization is renamed to
__asan_init_v4(). Pre-built libraries compiled with older Clang will not work
with the fresh runtime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212188 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r212109, which reverted r212088.
However, disable the assert as it's not necessary for correctness. There are
several corner cases that the assert needed to handle better for in-order
scheduling, but none of them are incorrect scheduler behavior. The assert is
mainly there to collect good unit tests like this and ensure that the
target-independent scheduler is working as expected with the various machine
models.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212187 91177308-0d34-0410-b5e6-96231b3b80d8
CombineTo doesn't allow replacing a node with itself so this would crash if the
combined shuffle is the same as the input shuffle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212181 91177308-0d34-0410-b5e6-96231b3b80d8
After Alexey Volkov, I'm adding the same property for KNL, that prefers ADD/SUB instead of INC/DEC.
Added a test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212178 91177308-0d34-0410-b5e6-96231b3b80d8
