TurnCopyIntoImpDef turns a copy into implicit_def and remove the val# defined by it. This causes an scavenger assertion later if the def reaches other blocks. Disable the transformation if the value live interval extends beyond its def block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73478 91177308-0d34-0410-b5e6-96231b3b80d8
- Change register allocation hint to a pair of unsigned integers. The hint type is zero (which means prefer the register specified as second part of the pair) or entirely target dependent.
- Allow targets to specify alternative register allocation orders based on allocation hint.
Part 2.
- Use the register allocation hint system to implement more aggressive load / store multiple formation.
- Aggressively form LDRD / STRD. These are formed *before* register allocation. It has to be done this way to shorten live interval of base and offset registers. e.g.
v1025 = LDR v1024, 0
v1026 = LDR v1024, 0
=>
v1025,v1026 = LDRD v1024, 0
If this transformation isn't done before allocation, v1024 will overlap v1025 which means it more difficult to allocate a register pair.
- Even with the register allocation hint, it may not be possible to get the desired allocation. In that case, the post-allocation load / store multiple pass must fix the ldrd / strd instructions. They can either become ldm / stm instructions or back to a pair of ldr / str instructions.
This is work in progress, not yet enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73381 91177308-0d34-0410-b5e6-96231b3b80d8
This is *not* turned on by default. Testing indicates this is just as likely to pessimize code. The main issue seems to be allocation preference doesn't work effectively. That will change once I've taught register allocator "swapping".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70503 91177308-0d34-0410-b5e6-96231b3b80d8
If the physical register does not belong to the virtual register's regclass,
don't coalesce. The physical register could be an invalid operand for an
instruction using the vreg.
The regclass matching is done after determining the actual subregisters being copied.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70298 91177308-0d34-0410-b5e6-96231b3b80d8
This should have no effect on generated code, but makes the intermediate state
of the coalescer more sane.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70238 91177308-0d34-0410-b5e6-96231b3b80d8
with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.
This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.
Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.
Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.
Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.
Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68576 91177308-0d34-0410-b5e6-96231b3b80d8
1. Use the same value# to represent unknown values being merged into sub-registers.
2. When coalescer commute an instruction and the destination is a physical register, update its sub-registers by merging in the extended ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66610 91177308-0d34-0410-b5e6-96231b3b80d8
Right now if the coalesced copy def is dead and its src is a kill, and that
there are now other uses within the live range, the coalescer would mark the
def of the source register as dead. But it should also check if there are
other kills which means the value has other uses not in the live range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64075 91177308-0d34-0410-b5e6-96231b3b80d8
v1024 = EDI // not killed
=
= EDI
One possible solution is for the coalescer to examine the sub-register live intervals in the same manner as the physical register. Another possibility is to examine defs and uses (when needed) of sub-registers. Both solutions are too expensive. For now, look for "short virtual intervals" and scan instructions to look for conflict instead.
This is a small win on x86-64. e.g. It shaves 403.gcc by ~80 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61847 91177308-0d34-0410-b5e6-96231b3b80d8
172 %ECX<def> = MOV32rr %reg1039<kill>
180 INLINEASM <es:subl $5,$1
sbbl $3,$0>, 10, %EAX<def>, 14, %ECX<earlyclobber,def>, 9, %EAX<kill>,
36, <fi#0>, 1, %reg0, 0, 9, %ECX<kill>, 36, <fi#1>, 1, %reg0, 0
188 %EAX<def> = MOV32rr %EAX<kill>
196 %ECX<def> = MOV32rr %ECX<kill>
204 %ECX<def> = MOV32rr %ECX<kill>
212 %EAX<def> = MOV32rr %EAX<kill>
220 %EAX<def> = MOV32rr %EAX
228 %reg1039<def> = MOV32rr %ECX<kill>
The early clobber operand ties ECX input to the ECX def.
The live interval of ECX is represented as this:
%reg20,inf = [46,47:1)[174,230:0) 0@174-(230) 1@46-(47)
The right way to represent this is something like
%reg20,inf = [46,47:2)[174,182:1)[181:230:0) 0@174-(182) 1@181-230 @2@46-(47)
Of course that won't work since that means overlapping live ranges defined by two val#.
The workaround for now is to add a bit to val# which says the val# is redefined by a early clobber def somewhere. This prevents the move at 228 from being optimized away by SimpleRegisterCoalescing::AdjustCopiesBackFrom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61259 91177308-0d34-0410-b5e6-96231b3b80d8
the copy instruction from the instruction list before asking the
target to create the new instruction. This gets the old instruction
out of the way so that it doesn't interfere with the target's
rematerialization code. In the case of x86, this helps it find
more cases where EFLAGS is not live.
Also, in the X86InstrInfo.cpp, teach isSafeToClobberEFLAGS to check
to see if it reached the end of the block after scanning each
instruction, instead of just before. This lets it notice when the
end of the block is only two instructions away, without doing any
additional scanning.
These changes allow rematerialization to clobber EFLAGS in more
cases, for example using xor instead of mov to set the return value
to zero in the included testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57872 91177308-0d34-0410-b5e6-96231b3b80d8
"If a re-materializable instruction has a register
operand, the spiller will change the register operand's
spill weight to HUGE_VAL to avoid it being spilled.
However, if the operand is already in the queue ready
to be spilled, avoid re-materializing it".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56837 91177308-0d34-0410-b5e6-96231b3b80d8
RA problem by expanding the live interval of an
earlyclobber def back one slot. Remove
overlap-earlyclobber throughout. Remove
earlyclobber bits and their handling from
live internals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56539 91177308-0d34-0410-b5e6-96231b3b80d8
isImmediate(), isRegister(), and friends, to avoid confusion
about having two different names with the same meaning. I'm
not attached to the longer names, and would be ok with
changing to the shorter names if others prefer it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56189 91177308-0d34-0410-b5e6-96231b3b80d8
vr2 = OR vr0, vr1
=>
vr2 = OR vr1, vr1 // after coalescing vr0 with vr1
Update the value# of the destination register with the copy instruction if that happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56165 91177308-0d34-0410-b5e6-96231b3b80d8
vr1024 = extract_subreg vr1025, 1
...
vr1024 = mov8rr AH
If vr1024 is coalesced with AH, the extract_subreg is now illegal since AH does not have a super-reg whose sub-register 1 is AH.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56118 91177308-0d34-0410-b5e6-96231b3b80d8
was exposed by fast isel's handling of shifts on X86-64. With this, FreeBench/pcompress2 passes on X86-64 in fast isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56067 91177308-0d34-0410-b5e6-96231b3b80d8
to multiply the instruction count by a constant factor in a few places, which
caused the register allocator to require many more iterations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53959 91177308-0d34-0410-b5e6-96231b3b80d8
live intervals itself to use an instruction count approximation that is
not affected by inserting empty indices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53937 91177308-0d34-0410-b5e6-96231b3b80d8
BB1:
vr1025 = copy vr1024
..
BB2:
vr1024 = op
= op vr1025
<loop eventually branch back to BB1>
Even though vr1025 is copied from vr1024, it's not safe to coalesced them since live range of vr1025 intersects the def of vr1024. This happens when vr1025 is assigned the value of the previous iteration of vr1024 in the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51394 91177308-0d34-0410-b5e6-96231b3b80d8
address of the PassInfo directly instead of calling getPassInfo.
This eliminates a bunch of dynamic initializations of static data.
Also, fold RegisterPassBase into PassInfo, make a bunch of its
data members const, and rearrange some code to initialize data
members in constructors instead of using setter member functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51022 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
e.g.
vr1024<2> extract_subreg vr1025, 2
If vr1024 do not have the same register class as vr1025, it's not safe to coalesce this away. For example, vr1024 might be a GPR32 while vr1025 might be a GPR64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50385 91177308-0d34-0410-b5e6-96231b3b80d8
If ALR and BLR overlaps and end of BLR extends beyond end of ALR, e.g.
A = or A, B
...
B = A
...
C = A<kill>
...
= B
then do not add kills of A to the newly created B interval.
- Also fix some kill info update bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48141 91177308-0d34-0410-b5e6-96231b3b80d8
vr1 = extract_subreg vr2, 3
...
vr3 = extract_subreg vr1, 2
The end result is vr3 is equal to vr2 with subidx 2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47592 91177308-0d34-0410-b5e6-96231b3b80d8
- For now, conservatively ignore copy MI whose source is a physical register. Commuting its def MI can cause a physical register live interval to be live through a loop (since we know it's live coming into the def MI).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47281 91177308-0d34-0410-b5e6-96231b3b80d8
register defs and uses after each successful coalescing.
- Also removed a number of hacks and fixed some subtle kill information bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47167 91177308-0d34-0410-b5e6-96231b3b80d8
PR1877.
A3 = op A2 B0<kill>
...
B1 = A3 <- this copy
...
= op A3 <- more uses
==>
B2 = op B0 A2<kill>
...
B1 = B2 <- now an identify copy
...
= op B2 <- more uses
This speeds up FreeBench/neural by 29%, Olden/bh by 12%, oopack_v1p8 by 53%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47046 91177308-0d34-0410-b5e6-96231b3b80d8
that "machine" classes are used to represent the current state of
the code being compiled. Given this expanded name, we can start
moving other stuff into it. For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.
Update all the clients to match.
This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45467 91177308-0d34-0410-b5e6-96231b3b80d8
- Eliminate the static "print" method for operands, moving it
into MachineOperand::print.
- Change various set* methods for register flags to take a bool
for the value to set it to. Remove unset* methods.
- Group methods more logically by operand flavor in MachineOperand.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45461 91177308-0d34-0410-b5e6-96231b3b80d8
When a live interval is being spilled, rather than creating short, non-spillable
intervals for every def / use, split the interval at BB boundaries. That is, for
every BB where the live interval is defined or used, create a new interval that
covers all the defs and uses in the BB.
This is designed to eliminate one common problem: multiple reloads of the same
value in a single basic block. Note, it does *not* decrease the number of spills
since no copies are inserted so the split intervals are *connected* through
spill and reloads (or rematerialization). The newly created intervals can be
spilled again, in that case, since it does not span multiple basic blocks, it's
spilled in the usual manner. However, it can reuse the same stack slot as the
previously split interval.
This is currently controlled by -split-intervals-at-bb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44198 91177308-0d34-0410-b5e6-96231b3b80d8
MachineOperand auxInfo. Previous clunky implementation uses an external map
to track sub-register uses. That works because register allocator uses
a new virtual register for each spilled use. With interval splitting (coming
soon), we may have multiple uses of the same register some of which are
of using different sub-registers from others. It's too fragile to constantly
update the information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44104 91177308-0d34-0410-b5e6-96231b3b80d8
the source register will be coalesced to the super register of the LHS. Properly
merge in the live ranges of the resulting coalesced interval that were part of
the original source interval to the live interval of the super-register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42961 91177308-0d34-0410-b5e6-96231b3b80d8
(almost) a register copy. However, it always coalesced to the register of the
RHS (the super-register). All uses of the result of a EXTRACT_SUBREG are sub-
register uses which adds subtle complications to load folding, spiller rewrite,
etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42899 91177308-0d34-0410-b5e6-96231b3b80d8
Changes related modules so VNInfo's are not copied. This decrease
copy coalescing time by 45% and overall compilation time by 10% on siod.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41579 91177308-0d34-0410-b5e6-96231b3b80d8
1. Eliminate the costly live interval "swapping".
2. Change ValueNumberInfo container from SmallVector to std::vector. The former
performs slowly when the vector size is very large.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41536 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix some minor bugs related to special markers on val# def. ~0U means
undefined, ~1U means dead val#.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40916 91177308-0d34-0410-b5e6-96231b3b80d8
kill instruction #, and source register number (iff the value# is defined by a
copy).
- Now def instruction # is set for every value#, not just for copy defined ones.
- Update some outdated code related inactive live ranges.
- Kill info not yet set. That's next patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40913 91177308-0d34-0410-b5e6-96231b3b80d8
simultaneously. Move that pass to SimpleRegisterCoalescing.
This makes it easier to implement alternative register allocation and
coalescing strategies while maintaining reuse of the existing live
interval analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37520 91177308-0d34-0410-b5e6-96231b3b80d8
