MachinePointerInfo, propagating the type out a level of API. Remove
the old MachineFunction::getMachineMemOperand impl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114393 91177308-0d34-0410-b5e6-96231b3b80d8
MachinePointerInfo struct, no functionality change.
This also adds an assert to MachineMemOperand::MachineMemOperand
that verifies that the Value* is either null or is an IR pointer type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114389 91177308-0d34-0410-b5e6-96231b3b80d8
For now the allocator still uses the old (internal) construction mechanism by default. This will be phased out soon assuming
no issues with the builder system come up.
To invoke the new construction mechanism just pass '-regalloc=pbqp -pbqp-builder' to llc. To provide custom constraints a
Target just needs to extend PBQPBuilder and pass an instance of their derived builder to the RegAllocPBQP constructor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114272 91177308-0d34-0410-b5e6-96231b3b80d8
take multiple cycles to decode.
For the current if-converter clients (actually only ARM), the instructions that
are predicated on false are not nops. They would still take machine cycles to
decode. Micro-coded instructions such as LDM / STM can potentially take multiple
cycles to decode. If-converter should take treat them as non-micro-coded
simple instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113570 91177308-0d34-0410-b5e6-96231b3b80d8
Since mem2reg isn't run at -O0, we get a ton of reloads from the stack,
for example, before, this code:
int foo(int x, int y, int z) {
return x+y+z;
}
used to compile into:
_foo: ## @foo
subq $12, %rsp
movl %edi, 8(%rsp)
movl %esi, 4(%rsp)
movl %edx, (%rsp)
movl 8(%rsp), %edx
movl 4(%rsp), %esi
addl %edx, %esi
movl (%rsp), %edx
addl %esi, %edx
movl %edx, %eax
addq $12, %rsp
ret
Now we produce:
_foo: ## @foo
subq $12, %rsp
movl %edi, 8(%rsp)
movl %esi, 4(%rsp)
movl %edx, (%rsp)
movl 8(%rsp), %edx
addl 4(%rsp), %edx ## Folded load
addl (%rsp), %edx ## Folded load
movl %edx, %eax
addq $12, %rsp
ret
Fewer instructions and less register use = faster compiles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113102 91177308-0d34-0410-b5e6-96231b3b80d8
Clobber ranges are no longer used when joining physical registers.
Instead, all aliases are checked for interference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113084 91177308-0d34-0410-b5e6-96231b3b80d8
any more. I plan to reimplement alloca promotion using SSAUpdater later.
It looks like Bill's URoR logic really always needs domtree, so the pass
now always asks for domtree info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112597 91177308-0d34-0410-b5e6-96231b3b80d8
general idea here is to have a group of x86 target specific nodes which are
going to be selected during lowering and then directly matched in isel.
The commit includes the addition of those specific nodes and a *bunch* of
patterns, and incrementally we're going to switch between them and what we
have right now. Both the patterns and target specific nodes can change as
we move forward with this work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111691 91177308-0d34-0410-b5e6-96231b3b80d8
extending vector load should extend each element in the same way as the
corresponding scalar extending load.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111577 91177308-0d34-0410-b5e6-96231b3b80d8
base registers were required. This will allow for slightly better packing
of the locals when alignment padding is necessary after callee saved registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111508 91177308-0d34-0410-b5e6-96231b3b80d8
mapping. Have the local block track its alignment requirement, and then
apply that when the block itself is allocated. Previously, offsets could
get adjusted in PEI to be different, relative to one another, than the
block allocation thought they would be, which defeats the point of doing
the allocation this way. Continuing rdar://8277890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111197 91177308-0d34-0410-b5e6-96231b3b80d8
experimental pass that allocates locals relative to one another before
register allocation and then assigns them to actual stack slots as a block
later in PEI. This will eventually allow targets with limited index offset
range to allocate additional base registers (not just FP and SP) to
more efficiently reference locals, as well as handle situations where
locals cannot be referenced via SP or FP at all (dynamic stack realignment
together with variable sized objects, for example). It's currently
incomplete and almost certainly buggy. Work in progress.
Disabled by default and gated via the -enable-local-stack-alloc command
line option.
rdar://8277890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111059 91177308-0d34-0410-b5e6-96231b3b80d8
When splitting a live range, the new registers have fewer uses and the
permissible register class may be less constrained. Recompute the register class
constraint from the uses of new registers created for a split. This may let them
be allocated from a larger set, possibly avoiding a spill.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110703 91177308-0d34-0410-b5e6-96231b3b80d8
register at a time. This turns out to be slightly faster than iterating over
instructions, but more importantly, it allows us to compute spill weights for
new registers created after the spill weight pass has run.
Also compute the allocation hint at the same time as the spill weight. This
allows us to use the spill weight as a cost metric for copies, and choose the
most profitable hint if there is more than one possibility.
The new hints provide a very small (< 0.1%) but universal code size improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110631 91177308-0d34-0410-b5e6-96231b3b80d8
pass. This pass should expand with all of the small, fine-grained optimization
passes to reduce compile time and increase happiment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110627 91177308-0d34-0410-b5e6-96231b3b80d8
After heavy editing of a live interval, it is much easier to simply renumber the
live values instead of trying to keep track of the unused ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110463 91177308-0d34-0410-b5e6-96231b3b80d8
Without this what was happening was:
* R3 is not marked as "used"
* ARM backend thinks it has to save it to the stack because of vaarg
* Offset computation correctly ignores it
* Offsets are wrong
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110446 91177308-0d34-0410-b5e6-96231b3b80d8
This pass tries to remove comparison instructions when possible. For instance,
if you have this code:
sub r1, 1
cmp r1, 0
bz L1
and "sub" either sets the same flag as the "cmp" instruction or could be
converted to set the same flag, then we can eliminate the "cmp" instruction all
together. This is a important for ARM where the ALU instructions could set the
CPSR flag, but need a special suffix ('s') to do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110423 91177308-0d34-0410-b5e6-96231b3b80d8
be killed before being redefined.
These checks are usually disabled, and usually fail when enabled. We de facto
allow live registers to be redefined without a kill, the corresponding
assertions in RegScavenger were removed long ago.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110362 91177308-0d34-0410-b5e6-96231b3b80d8
protectors, to be near the stack protectors on the stack. Accomplish this by
tagging the stack object with a predicate that indicates that it would trigger
this. In the prolog-epilog inserter, assign these objects to the stack after the
stack protector but before the other objects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109481 91177308-0d34-0410-b5e6-96231b3b80d8
appropriate for targets without detailed instruction iterineries.
The scheduler schedules for increased instruction level parallelism in
low register pressure situation; it schedules to reduce register pressure
when the register pressure becomes high.
On x86_64, this is a win for all tests in CFP2000. It also sped up 256.bzip2
by 16%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109300 91177308-0d34-0410-b5e6-96231b3b80d8
Still very much under development. Comments and fixes will be forthcoming.
(This commit includes some small tweaks to LiveIntervals & LoopInfo to support the splitter)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108615 91177308-0d34-0410-b5e6-96231b3b80d8
since it doesn't work for front-ends which don't emit column information
(which includes llvm-gcc in its present configuration), and doesn't
work for clang for K&R style variables where the variables are declared
in a different order from the parameter list.
Instead, make a separate pass through the instructions to collect the
llvm.dbg.declare instructions in order. This ensures that the debug
information for variables is emitted in this order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108538 91177308-0d34-0410-b5e6-96231b3b80d8
independent of the order that isel happens to visit the dbg_declare
intrinsics. This fixes a bug in which the formal arguments were
being printed in reverse order, now that fast isel is going bottom up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108369 91177308-0d34-0410-b5e6-96231b3b80d8
constants, since they may not be emited near the other instructions
which get the same line, and this confuses debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108302 91177308-0d34-0410-b5e6-96231b3b80d8
correct alignment information, which simplifies ExpandRes_VAARG a bit.
The patch introduces a new alignment information to TargetLoweringInfo. This is
needed since the two natural candidates cannot be used:
* The 's' in target data: If this is set to the minimal alignment of any
argument, getCallFrameTypeAlignment would return 4 for doubles on ARM for
example.
* The getTransientStackAlignment method. It is possible for an architecture to
have argument less aligned than what we maintain the stack pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108072 91177308-0d34-0410-b5e6-96231b3b80d8
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108039 91177308-0d34-0410-b5e6-96231b3b80d8
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107987 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike insertMachineInstrInMaps this does not guarantee live intervals will
remain correct. The caller will need to manually update intervals to account
for the changes made to the CFG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107958 91177308-0d34-0410-b5e6-96231b3b80d8
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.
Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107879 91177308-0d34-0410-b5e6-96231b3b80d8
(if there are any) and use the one which remains available for the longest
rather than just using the first one. This should help enable better re-use
of the loaded frame index values. rdar://7318760
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107847 91177308-0d34-0410-b5e6-96231b3b80d8
around everywhere, and also give it an InsertPt member, to enable isel
to operate at an arbitrary position within a block, rather than just
appending to a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107791 91177308-0d34-0410-b5e6-96231b3b80d8
instance, rather than pointers to all of FunctionLoweringInfo's
members.
This eliminates an NDEBUG ABI sensitivity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107789 91177308-0d34-0410-b5e6-96231b3b80d8
It is OK for an alias live range to overlap if there is a copy to or from the
physical register. CoalescerPair can work out if the copy is coalescable
independently of the alias.
This means that we can join with the actual destination interval instead of
using the getOrigDstReg() hack. It is no longer necessary to merge clobber
ranges into subregisters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107695 91177308-0d34-0410-b5e6-96231b3b80d8
