Renamed methods caseBegin, caseEnd and caseDefault with case_begin, case_end, and case_default.
Added some notes relative to case iterators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152532 91177308-0d34-0410-b5e6-96231b3b80d8
a common collection of methods on Value, and share their implementation.
We had two variations in two different places already, and I need the
third variation for inline cost estimation.
Reviewed by Duncan Sands on IRC, but further comments here welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152490 91177308-0d34-0410-b5e6-96231b3b80d8
* Add enums and structures for GNU version information.
* Implement extraction of that information on a per-symbol basis (ELFObjectFile::getSymbolVersion).
* Implement a generic interface, GetELFSymbolVersion(), for getting the symbol version from the ObjectFile (hides the templating).
* Have llvm-readobj print out the version, when available.
* Add a test for the new feature: readobj-elf-versioning.test
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152436 91177308-0d34-0410-b5e6-96231b3b80d8
caused several clients to select the slow variation. =[ This is extra
annoying because we don't have any realistic way of testing this -- by
design, these two functions *must* compute the same value.
Found while inspecting the output of some benchmarks I'm working on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152369 91177308-0d34-0410-b5e6-96231b3b80d8
buildbots. Original commit message:
[ADT] Change the trivial FoldingSetNodeID::Add* methods to be inline, reapplied
with a fix for the longstanding over-read of 32-bit pointer values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152304 91177308-0d34-0410-b5e6-96231b3b80d8
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120130/136146.html
Implemented CaseIterator and it solves almost all described issues: we don't need to mix operand/case/successor indexing anymore. Base iterator class is implemented as a template since it may be initialized either from "const SwitchInst*" or from "SwitchInst*".
ConstCaseIt is just a read-only iterator.
CaseIt is read-write iterator; it allows to change case successor and case value.
Usage of iterator allows totally remove resolveXXXX methods. All indexing convertions done automatically inside the iterator's getters.
Main way of iterator usage looks like this:
SwitchInst *SI = ... // intialize it somehow
for (SwitchInst::CaseIt i = SI->caseBegin(), e = SI->caseEnd(); i != e; ++i) {
BasicBlock *BB = i.getCaseSuccessor();
ConstantInt *V = i.getCaseValue();
// Do something.
}
If you want to convert case number to TerminatorInst successor index, just use getSuccessorIndex iterator's method.
If you want initialize iterator from TerminatorInst successor index, use CaseIt::fromSuccessorIndex(...) method.
There are also related changes in llvm-clients: klee and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152297 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
Use uint16_t to store InstrNameIndices in MCInstrInfo. Add asserts to protect all 16-bit string table offsets. Also make sure the string to offset table string is not larger than 65536 characters since larger string literals aren't portable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152296 91177308-0d34-0410-b5e6-96231b3b80d8
analysis to be methods on the cost analysis's function info object
instead of the code metrics object. These really are just users of the
code metrics, they're building the information for the function's
analysis.
This is the first step of growing the amount of information we collect
about a function in order to cope with pair-wise simplifications due to
allocas.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152283 91177308-0d34-0410-b5e6-96231b3b80d8
Allow targets to provide their own schedulers (subclass of
ScheduleDAGInstrs) to the misched pass. Select schedulers using
-misched=...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152278 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
Use uint16_t to store InstrNameIndices in MCInstrInfo. Add asserts to protect
all 16-bit string table offsets. Also make sure the string to offset table
string is not larger than 65536 characters since larger string literals aren't
portable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152233 91177308-0d34-0410-b5e6-96231b3b80d8
compilers. It seems that GCC 4.3 (and likely older) simply aren't going
to do SFINAE on non-type template parameters the way Clang and modern
GCCs do...
Now we detect the implicit conversion to an integer type, and then
blacklist classes, pointers, and floating point types. This seems to
work well enough, and I'm hopeful will return the bots to life.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152227 91177308-0d34-0410-b5e6-96231b3b80d8
traits.
With this change, the pattern used here is *extremely* close to the
pattern used elsewhere in the file, so I'm hoping it survives the
build-bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152225 91177308-0d34-0410-b5e6-96231b3b80d8
template argument and an *implicit* conversion from '0' to a null
pointer. For some bizarre reason, GCC 4.3.2 thinks that the cast to
'(T*)' is invalid inside of an enumerator's value... which it isn't but
whatever. ;] This pattern is used elsewhere in the type_traits header
and so hopefully will survive the wrath of the build bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152220 91177308-0d34-0410-b5e6-96231b3b80d8
Deleting them because they aren't used. =D
Yell if you need these, I'm happy to instead replace them with nice uses
of the new infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152219 91177308-0d34-0410-b5e6-96231b3b80d8
integral and enumeration types. This is accomplished with a bit of
template type trait magic. Thanks to Richard Smith for the core idea
here to detect viable types by detecting the set of types which can be
default constructed in a template parameter.
This is used (in conjunction with a system for detecting nullptr_t
should it exist) to provide an is_integral_or_enum type trait that
doesn't need a whitelist or direct compiler support.
With this, the hashing is extended to the more general facility. This
will be used in a subsequent commit to hashing more things, but I wanted
to make sure the type trait magic went through the build bots separately
in case other compilers don't like this formulation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152217 91177308-0d34-0410-b5e6-96231b3b80d8
ScheduleDAG is responsible for the DAG: SUnits and SDeps. It provides target hooks for latency computation.
ScheduleDAGInstrs extends ScheduleDAG and defines the current scheduling region in terms of MachineInstr iterators. It has access to the target's scheduling itinerary data. ScheduleDAGInstrs provides the logic for building the ScheduleDAG for the sequence of MachineInstrs in the current region. Target's can implement highly custom schedulers by extending this class.
ScheduleDAGPostRATDList provides the driver and diagnostics for current postRA scheduling. It maintains a current Sequence of scheduled machine instructions and logic for splicing them into the block. During scheduling, it uses the ScheduleHazardRecognizer provided by the target.
Specific changes:
- Removed driver code from ScheduleDAG. clearDAG is the only interface needed.
- Added enterRegion/exitRegion hooks to ScheduleDAGInstrs to delimit the scope of each scheduling region and associated DAG. They should be used to setup and cleanup any region-specific state in addition to the DAG itself. This is necessary because we reuse the same ScheduleDAG object for the entire function. The target may extend these hooks to do things at regions boundaries, like bundle terminators. The hooks are called even if we decide not to schedule the region. So all instructions in a block are "covered" by these calls.
- Added ScheduleDAGInstrs::begin()/end() public API.
- Moved Sequence into the driver layer, which is specific to the scheduling algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152208 91177308-0d34-0410-b5e6-96231b3b80d8
"is sized". This prevents every query to isSized() from recursing over
every sub-type of a struct type. This could get *very* slow for
extremely deep nesting of structs, as in 177.mesa.
This change is a 45% speedup for 'opt -O2' of 177.mesa.linked.bc, and
likely a significant speedup for other cases as well. It even impacts
-O0 cases because so many part of the code try to check whether a type
is sized.
Thanks for the review from Nick Lewycky and Benjamin Kramer on IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152197 91177308-0d34-0410-b5e6-96231b3b80d8
This currently assumes that both sets have the same SmallSize to keep the implementation simple,
a limitation that can be lifted if someone cares.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152143 91177308-0d34-0410-b5e6-96231b3b80d8
With the new composite physical registers to represent arbitrary pairs
of DPR registers, we don't need the pseudo-registers anymore. Get rid of
a bunch of them that use DPR register pairs and just use the real
instructions directly instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152045 91177308-0d34-0410-b5e6-96231b3b80d8
complains about the truncation of a 64-bit constant to a 32-bit value
when size_t is 32-bits wide, but *only with static_cast*!!! The exact
signal that should *silence* such a warning, and in fact does silence it
with both GCC and Clang.
Anyways, this was causing grief for all the MSVC builds, so pointless
change made. Thanks to Nikola on IRC for confirming that this works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152021 91177308-0d34-0410-b5e6-96231b3b80d8
MachineOperands that define part of a virtual register must have an
<undef> flag if they are not intended as read-modify-write operands.
The old trick of adding an <imp-def> operand doesn't work any longer.
Fixes PR12177.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152008 91177308-0d34-0410-b5e6-96231b3b80d8
new hash_value infrastructure, and replace their implementations using
hash_combine. This removes a complete copy of Jenkin's lookup3 hash
function (which is both significantly slower and lower quality than the
one implemented in hash_combine) along with a somewhat scary xor-only
hash function.
Now that APInt and APFloat can be passed directly to hash_combine,
simplify the rest of the LLVMContextImpl hashing to use the new
infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152004 91177308-0d34-0410-b5e6-96231b3b80d8
The optimizer should handle this eventually, but currently LVI isn't really designed for this kind of stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151918 91177308-0d34-0410-b5e6-96231b3b80d8
folks who know something about PPC tell me that the byte swap is crazy
fast and without this the bit mixture would actually be different. It
might not be worse, but I've not measured it and so I'd rather not trust
it. This way, the algorithm is identical on both endianness hosts. I'll
look into any performance issues etc stemming from this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151892 91177308-0d34-0410-b5e6-96231b3b80d8
just ensure that the number of bytes in the pair is the sum of the bytes
in each side of the pair. As long as thats true, there are no extra
bytes that might be padding.
Also add a few tests that previously would have slipped through the
checking. The more accurate checking mechanism catches these and ensures
they are handled conservatively correctly.
Thanks to Duncan for prodding me to do this right and more simply.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151891 91177308-0d34-0410-b5e6-96231b3b80d8
hashable data. This matters when we have pair<T*, U*> as a key, which is
quite common in DenseMap, etc. To that end, we need to detect when this
is safe. The requirements on a generic std::pair<T, U> are:
1) Both T and U must satisfy the existing is_hashable_data trait. Note
that this includes the requirement that T and U have no internal
padding bits or other bits not contributing directly to equality.
2) The alignment constraints of std::pair<T, U> do not require padding
between consecutive objects.
3) The alignment constraints of U and the size of T do not conspire to
require padding between the first and second elements.
Grow two somewhat magical traits to detect this by forming a pod
structure and inspecting offset artifacts on it. Hopefully this won't
cause any compilers to panic.
Added and adjusted tests now that pairs, even nested pairs, are treated
as just sequences of data.
Thanks to Jeffrey Yasskin for helping me sort through this and reviewing
the somewhat subtle traits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151883 91177308-0d34-0410-b5e6-96231b3b80d8
an open question of whether we can do better than this by treating pairs
as boring data containers and directly hashing the two subobjects. This
at least makes the API reasonable.
In order to make this change, I reorganized the header a bit. I lifted
the declarations of the hash_value functions up to the top of the header
with their doxygen comments as these are intended for users to interact
with. They shouldn't have to wade through implementation details. I then
defined them at the very end so that they could be defined in terms of
hash_combine or any other hashing infrastructure.
Added various pair-hashing unittests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151882 91177308-0d34-0410-b5e6-96231b3b80d8
the hash_code. I'm not sure what I was thinking here, the use cases for
special values are in the *keys*, not in the hashes of those keys.
We can always resurrect this if needed, or clients can accomplish the
same goal themselves. This makes the general case somewhat faster (~5
cycles faster on my machine) and smaller with less branching.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151865 91177308-0d34-0410-b5e6-96231b3b80d8
of the proposed standard hashing interfaces (N3333), and to use
a modified and tuned version of the CityHash algorithm.
Some of the highlights of this change:
-- Significantly higher quality hashing algorithm with very well
distributed results, and extremely few collisions. Should be close to
a checksum for up to 64-bit keys. Very little clustering or clumping of
hash codes, to better distribute load on probed hash tables.
-- Built-in support for reserved values.
-- Simplified API that composes cleanly with other C++ idioms and APIs.
-- Better scaling performance as keys grow. This is the fastest
algorithm I've found and measured for moderately sized keys (such as
show up in some of the uniquing and folding use cases)
-- Support for enabling per-execution seeds to prevent table ordering
or other artifacts of hashing algorithms to impact the output of
LLVM. The seeding would make each run different and highlight these
problems during bootstrap.
This implementation was tested extensively using the SMHasher test
suite, and pased with flying colors, doing better than the original
CityHash algorithm even.
I've included a unittest, although it is somewhat minimal at the moment.
I've also added (or refactored into the proper location) type traits
necessary to implement this, and converted users of GeneralHash over.
My only immediate concerns with this implementation is the performance
of hashing small keys. I've already started working to improve this, and
will continue to do so. Currently, the only algorithms faster produce
lower quality results, but it is likely there is a better compromise
than the current one.
Many thanks to Jeffrey Yasskin who did most of the work on the N3333
paper, pair-programmed some of this code, and reviewed much of it. Many
thanks also go to Geoff Pike Pike and Jyrki Alakuijala, the original
authors of CityHash on which this is heavily based, and Austin Appleby
who created MurmurHash and the SMHasher test suite.
Also thanks to Nadav, Tobias, Howard, Jay, Nick, Ahmed, and Duncan for
all of the review comments! If there are further comments or concerns,
please let me know and I'll jump on 'em.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151822 91177308-0d34-0410-b5e6-96231b3b80d8
Allows us to de-virtualize the function and provides access to it in
the instruction printer, which is useful for handling composite
physical registers (e.g., ARM register lists).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151815 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to make TRC non-polymorphic and value-initializable, eliminating a huge static
initializer and a ton of cruft from the generated code.
Shrinks ARMBaseRegisterInfo.o by ~100k.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151806 91177308-0d34-0410-b5e6-96231b3b80d8
Simply treat bundles as instructions. Spill code is inserted between
bundles, never inside a bundle. Rewrite all operands in a bundle at
once.
Don't attempt and memory operand folding inside bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151787 91177308-0d34-0410-b5e6-96231b3b80d8
* Add begin_dynamic_table() / end_dynamic_table() private interface to ELFObjectFile.
* Add begin_libraries_needed() / end_libraries_needed() interface to ObjectFile, for grabbing the list of needed libraries for a shared object or dynamic executable.
* Implement this new interface completely for ELF, leave stubs for COFF and MachO.
* Add 'llvm-readobj' tool for dumping ObjectFile information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151785 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the function to be inlined, and makes it suitable for use in
getInstructionIndex().
Also provide a const version. C++ is great for touch typing practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151782 91177308-0d34-0410-b5e6-96231b3b80d8
std::vector.
- Good for 1-2% speedup on writing PCH for Cocoa.h.
- Clang side API match to follow shortly, there wasn't an easy way to make this
non-breaking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151750 91177308-0d34-0410-b5e6-96231b3b80d8
Rename ST_External to ST_Unknown, and slightly change its semantics. It now only indicates that the symbol's type
is unknown, not that the symbol is undefined. (For that, use ST_Undefined).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151696 91177308-0d34-0410-b5e6-96231b3b80d8
This function does more or less the same as
MI::readsWritesVirtualRegister(), but it supports bundles as well.
It also determines if any constraint requires reading and writing
operands to use the same register. Most clients want to know.
Use the more modern MO.readsReg() instead of trying to sort out undefs
and partial redefines. Stop supporting the extra full <imp-def> operand
as an alternative to <def,undef> sub-register defines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151690 91177308-0d34-0410-b5e6-96231b3b80d8
Extract a base class and provide four specific sub-classes for iterating
over const/non-const bundles/instructions.
This eliminates the mystery bool constructor argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151684 91177308-0d34-0410-b5e6-96231b3b80d8
SlotIndexes are not assigned to instructions inside bundles, but it is
still valid to look up the index of those instructions.
The reverse getInstructionFromIndex() will return the first instruction
in the bundle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151672 91177308-0d34-0410-b5e6-96231b3b80d8
debug info for assembly files. We were already doing the right thing when
producing debug info for C/C++.
ELF linkers don't know dwarf, so they depend on these relocations to produce
valid dwarf output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151655 91177308-0d34-0410-b5e6-96231b3b80d8
the processor keeps a return addresses stack (RAS) which stores the address
and the instruction execution state of the instruction after a function-call
type branch instruction.
Calling a "noreturn" function with normal call instructions (e.g. bl) can
corrupt RAS and causes 100% return misprediction so LLVM should use a
unconditional branch instead. i.e.
mov lr, pc
b _foo
The "mov lr, pc" is issued in order to get proper backtrace.
rdar://8979299
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151623 91177308-0d34-0410-b5e6-96231b3b80d8
We on the linker to resolve calls to the appropriate BL/BLX instruction
to make interworking function correctly. It uses the symbol in the
relocation to do that, so we need to be careful about being too clever.
To enable this for ARM mode, split the BL/BLX fixup kind off from the
unconditional-branch fixups.
rdar://10927209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151571 91177308-0d34-0410-b5e6-96231b3b80d8
The MIOperands iterator can visit operands on a single instruction, or
all operands in a bundle. This simplifies code like the register
allocator that treats bundles as a set of operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151529 91177308-0d34-0410-b5e6-96231b3b80d8
verifier does. This correctly handles invoke.
Thanks to Duncan, Andrew and Chris for the comments.
Thanks to Joerg for the early testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151469 91177308-0d34-0410-b5e6-96231b3b80d8
are optimization hints, but at -O0 we're not optimizing. This becomes a problem
when the alwaysinline attribute is abused.
rdar://10921594
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151429 91177308-0d34-0410-b5e6-96231b3b80d8
it with memcpy. This also fixes a problem on big-endian hosts, where
addUnaligned would return different results depending on the alignment
of the data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151247 91177308-0d34-0410-b5e6-96231b3b80d8
Added array subscript to SparseSet for convenience.
Slight reorg to make it easier to manage the def/use sets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151228 91177308-0d34-0410-b5e6-96231b3b80d8
The standard function epilog includes a .size directive, but ppc64 uses
an alternate local symbol to tag the actual start of each function.
Until recently, binutils accepted the .size directive as:
.size test1, .Ltmp0-test1
however, using this directive with recent binutils will result in the error:
.size expression for XXX does not evaluate to a constant
so we must use the label which actually tags the start of the function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151200 91177308-0d34-0410-b5e6-96231b3b80d8
Add some data structures to represent for loops. These will be
referenced during object processing to do any needed iteration and
instantiation.
Add foreach keyword support to the lexer.
Add a mode to indicate that we're parsing a foreach loop. This allows
the value parser to early-out when processing the foreach value list.
Add a routine to parse foreach iteration declarations. This is
separate from ParseDeclaration because the type of the named value
(the iterator) doesn't match the type of the initializer value (the
value list). It also needs to add two values to the foreach record:
the iterator and the value list.
Add parsing support for foreach.
Add the code to process foreach loops and create defs based
on iterator values.
Allow foreach loops to be matched at the top level.
When parsing an IDValue check if it is a foreach loop iterator for one
of the active loops. If so, return a VarInit for it.
Add Emacs keyword support for foreach.
Add VIM keyword support for foreach.
Add tests to check foreach operation.
Add TableGen documentation for foreach.
Support foreach with multiple objects.
Support non-braced foreach body with one object.
Do not require types for the foreach declaration. Assume the iterator
type from the iteration list element type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151164 91177308-0d34-0410-b5e6-96231b3b80d8
chip in r139383, and the PSP components of the triple are really
annoying to parse. Let's leave this chapter behind. There is no reason
to expect LLVM to see a PSP-related triple these days, and so no
reasonable motivation to support them.
It might be reasonable to prune a few of the older MIPS triple forms in
general, but as those at least cause no burden on parsing (they aren't
both a chip and an OS!), I'm happy to leave them in for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151156 91177308-0d34-0410-b5e6-96231b3b80d8
Affect on SD scheduling and postRA scheduling:
Printing the DAG will display the nodes in top-down topological order.
This matches the order within the MBB and makes my life much easier in general.
Affect on misched:
We don't need to track virtual register uses at all. This is awesome.
I also intend to rely on the SUnit ID as a topo-sort index. So if A < B then we cannot have an edge B -> A.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151135 91177308-0d34-0410-b5e6-96231b3b80d8
For objects that can be identified by small unsigned keys, SparseSet
provides constant time clear() and fast deterministic iteration. Insert,
erase, and find operations are typically faster than hash tables.
SparseSet is useful for keeping information about physical registers,
virtual registers, or numbered basic blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151110 91177308-0d34-0410-b5e6-96231b3b80d8
bundles. This method takes a bundle start and an MI being bundled, and makes
the intervals for the MI's operands appear to start/end on the bundle start.
Also fixes some minor cosmetic issues (whitespace, naming convention) in the
HMEditor code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151099 91177308-0d34-0410-b5e6-96231b3b80d8
They're private static methods but we can just make them static
functions in the implementation. It makes the implementations a touch
more wordy, but takes another chunk out of the header file.
Also, take the opportunity to switch the names to the new coding
conventions.
No functionality changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151047 91177308-0d34-0410-b5e6-96231b3b80d8
Passes after RegAlloc should be able to rely on MRI->getNumVirtRegs() == 0.
This makes sharing code for pre/postRA passes more robust.
Now, to check if a pass is running before the RA pipeline begins, use MRI->isSSA().
To check if a pass is running after the RA pipeline ends, use !MRI->getNumVirtRegs().
PEI resets virtual regs when it's done scavenging.
PTX will either have to provide its own PEI pass or assign physregs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151032 91177308-0d34-0410-b5e6-96231b3b80d8
construction. Simplify its interface, implementation, and users
accordingly as there is no longer an 'uninitialized' state to check for.
Also, fixes a bug lurking in the interface as there was one method that
didn't correctly check for initialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151024 91177308-0d34-0410-b5e6-96231b3b80d8
Teach TargetSelectionDAG about lengthening loads for vector types and set v4i8 as legal. Allow FP_TO_UINT for v4i16 from v4i32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150956 91177308-0d34-0410-b5e6-96231b3b80d8
MRI keeps track of which physregs have been used. Make sure it gets
updated with all the regmask-clobbered registers.
Delete the closePhysRegsUsed() function which isn't necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150830 91177308-0d34-0410-b5e6-96231b3b80d8
metadata may still unwind, but only in ways that the ARC
optimizer doesn't need to consider. This permits more
aggressive optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150829 91177308-0d34-0410-b5e6-96231b3b80d8
