The default assumes that a 16-bit signed offset is used.
LDS instruction use a 16-bit unsigned offset, so it wasn't
being used in some cases where it was assumed a negative offset
could be used.
More should be done here, but first isLegalAddressingMode needs
to gain an addressing mode argument. For now, copy most of the rest
of the default implementation with the immediate offset change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215732 91177308-0d34-0410-b5e6-96231b3b80d8
This for some reason fixes v1i64 kernel arguments on pre-SI. This
currently breaks some other cases in the kernel-args.ll test for R600,
but I'm not particularly confident in the new output. VTX_READ_* are not
used for some of the scalarized cases, and the code reading from the
constant buffer doesn't make much sense to me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215564 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, our use of the SDNode class hierarchy for INTRINSIC_W_CHAIN and
INTRINSIC_VOID nodes is somewhat broken right now. These nodes sometimes are
used for memory intrinsics (those with MachineMemOperands), and sometimes not.
When not, the nodes are not created as instances of MemIntrinsicSDNode, but
rather created as some other subclass of SDNode using DAG::getNode. When they
are memory intrinsics, they are created using DAG::getMemIntrinsicNode as
instances of MemIntrinsicSDNode. MemIntrinsicSDNode is a subclass of
MemSDNode, but prior to r214452, we had a non-self-consistent setup whereby
MemIntrinsicSDNode::classof on INTRINSIC_W_CHAIN and INTRINSIC_VOID would
return true but MemSDNode::classof on INTRINSIC_W_CHAIN and INTRINSIC_VOID
would return false. In r214452, MemSDNode::classof was changed to return true
for INTRINSIC_W_CHAIN and INTRINSIC_VOID, which is now self-consistent. The
problem is that neither the pre-r214452 logic and the post-r214452 logic are
really right. The truth is that not all INTRINSIC_W_CHAIN and INTRINSIC_VOID
nodes are instances of MemIntrinsicSDNode (or MemSDNode for that matter), and
the return value from classof needs to reflect that. This was broken before
r214452 (because MemIntrinsicSDNode::classof always returned true), and was
broken afterward (because MemSDNode::classof also always returned true), and
will now be correct.
The minimal solution is to grab one of the SubclassData bits (there is one left
for MemIntrinsicSDNode nodes) and use it to store whether or not a particular
INTRINSIC_W_CHAIN or INTRINSIC_VOID is really an instance of
MemIntrinsicSDNode or not. Doing this allows both MemIntrinsicSDNode::classof
and MemSDNode::classof to return the correct answer for the underlying object
for both the memory-intrinsic and non-memory-intrinsic cases.
This fixes the problem that r214452 created in the SelectionDAGDumper (thanks
to Matt Arsenault for pointing it out).
Because PowerPC does not implement getTgtMemIntrinsic, this change breaks
test/CodeGen/PowerPC/unal-altivec-wint.ll. I've XFAILed it for now, and will
fix it in a follow-up commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215511 91177308-0d34-0410-b5e6-96231b3b80d8
v2: drop enum keyword
use correct extension mode
don't bother computing the sign in unsinged case
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215462 91177308-0d34-0410-b5e6-96231b3b80d8
v2: add tests
rename LowerSDIV24 to LowerSDIVREM24
handle the rem part in this function
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215460 91177308-0d34-0410-b5e6-96231b3b80d8
This saves us from having to copy a 64-bit 0 value into VGPRs for
BUFFER_* instruction which only have a 12-bit immediate offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215399 91177308-0d34-0410-b5e6-96231b3b80d8
There are no variable values like registers encoded in the low 32 bits of MUBUF
instructions, so it is relatively easy to check these bits, and it will
help prevent us from introducing encoding bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215397 91177308-0d34-0410-b5e6-96231b3b80d8
This bit was left uninitialized, which was causing some random failures
of piglit tests.
NOTE: This is a candidate for the 3.5 branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215396 91177308-0d34-0410-b5e6-96231b3b80d8
These tests were using SI-NOT: MOVREL to make sure concat vectors
weren't being lowered to stack loads and stores, but we are using
scratch buffers for the stack now instead of registers, so we need
to add an additional SI-NOT check for scratch buffers.
With this change I was able to uncover one broken test which will
be fixed in a future commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215269 91177308-0d34-0410-b5e6-96231b3b80d8
This partially fixes weird looking load scheduling
in memcpy test. The load clustering doesn't seem
particularly smart, but this method seems to be partially
deprecated so it might not be worth trying to fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214943 91177308-0d34-0410-b5e6-96231b3b80d8
This currently has a noticable effect on the kernel argument loads.
LDS and global loads are more problematic, I think because of how copies
are currently inserted to ensure that the address is a VGPR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214942 91177308-0d34-0410-b5e6-96231b3b80d8
SI doesn't use REGISTER_LOAD anymore, but it was still hitting this code
path for 8-bit and 16-bit private loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214865 91177308-0d34-0410-b5e6-96231b3b80d8
This slipped in in r214467, so something like
V_MOV_B32_e32 v0, ... is now printed with 2 spaces
between the instruction name and first operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214660 91177308-0d34-0410-b5e6-96231b3b80d8
SI doesn't use REGISTER_LOAD anymore, but it was still hitting this code
path for 8-bit and 16-bit private loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214566 91177308-0d34-0410-b5e6-96231b3b80d8
Abs/neg folding has moved out of foldOperands and into the instruction
selection phase using complex patterns. As a consequence of this
change, we now prefer to select the 64-bit encoding for most
instructions and the modifier operands have been dropped from
integer VOP3 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214467 91177308-0d34-0410-b5e6-96231b3b80d8
We were commuting the instruction by still shrinking it using the
original opcode.
NOTE: This is a candidate for the 3.5 branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214463 91177308-0d34-0410-b5e6-96231b3b80d8
The default guess uses i32. This needs an address space argument
to really do the right thing in all cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214104 91177308-0d34-0410-b5e6-96231b3b80d8
Rename to allowsMisalignedMemoryAccess.
On R600, 8 and 16 byte accesses are mostly OK with 4-byte alignment,
and don't need to be split into multiple accesses. Vector loads with
an alignment of the element type are not uncommon in OpenCL code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214055 91177308-0d34-0410-b5e6-96231b3b80d8
There was no check prefix for the instruction lines.
Match what is emitted though, although I'm pretty sure it is
incorrect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214035 91177308-0d34-0410-b5e6-96231b3b80d8
over each node in the worklist prior to combining.
This allows the combiner to produce new nodes which need to go back
through legalization. This is particularly useful when generating
operands to target specific nodes in a post-legalize DAG combine where
the operands are significantly easier to express as pre-legalized
operations. My immediate use case will be PSHUFB formation where we need
to build a constant shuffle mask with a build_vector node.
This also refactors the relevant functionality in the legalizer to
support this, and updates relevant tests. I've spoken to the R600 folks
and these changes look like improvements to them. The avx512 change
needs to be investigated, I suspect there is a disagreement between the
legalizer and the DAG combiner there, but it seems a minor issue so
leaving it to be re-evaluated after this patch.
Differential Revision: http://reviews.llvm.org/D4564
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214020 91177308-0d34-0410-b5e6-96231b3b80d8
which have successfully round-tripped through the combine phase, and use
this to ensure all operands to DAG nodes are visited by the combiner,
even if they are only added during the combine phase.
This is critical to have the combiner reach nodes that are *introduced*
during combining. Previously these would sometimes be visited and
sometimes not be visited based on whether they happened to end up on the
worklist or not. Now we always run them through the combiner.
This fixes quite a few bad codegen test cases lurking in the suite while
also being more principled. Among these, the TLS codegeneration is
particularly exciting for programs that have this in the critical path
like TSan-instrumented binaries (although I think they engineer to use
a different TLS that is faster anyways).
I've tried to check for compile-time regressions here by running llc
over a merged (but not LTO-ed) clang bitcode file and observed at most
a 3% slowdown in llc. Given that this is essentially a worst case (none
of opt or clang are running at this phase) I think this is tolerable.
The actual LTO case should be even less costly, and the cost in normal
compilation should be negligible.
With this combining logic, it is possible to re-legalize as we combine
which is necessary to implement PSHUFB formation on x86 as
a post-legalize DAG combine (my ultimate goal).
Differential Revision: http://reviews.llvm.org/D4638
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213898 91177308-0d34-0410-b5e6-96231b3b80d8
Use ComputeNumSignBits instead of checking for i8 / i16 which only
worked when AMDIL was lying about having legal i8 / i16.
If an integer is known to fit in 24-bits, we can
do division faster with float ops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213843 91177308-0d34-0410-b5e6-96231b3b80d8
insertions.
The old behavior could cause arbitrarily bad memory usage in the DAG
combiner if there was heavy traffic of adding nodes already on the
worklist to it. This commit switches the DAG combine worklist to work
the same way as the instcombine worklist where we null-out removed
entries and only add new entries to the worklist. My measurements of
codegen time shows slight improvement. The memory utilization is
unsurprisingly dominated by other factors (the IR and DAG itself
I suspect).
This change results in subtle, frustrating churn in the particular order
in which DAG combines are applied which causes a number of minor
regressions where we fail to match a pattern previously matched by
accident. AFAICT, all of these should be using AddToWorklist to directly
or should be written in a less brittle way. None of the changes seem
drastically bad, and a few of the changes seem distinctly better.
A major change required to make this work is to significantly harden the
way in which the DAG combiner handle nodes which become dead
(zero-uses). Previously, we relied on the ability to "priority-bump"
them on the combine worklist to achieve recursive deletion of these
nodes and ensure that the frontier of remaining live nodes all were
added to the worklist. Instead, I've introduced a routine to just
implement that precise logic with no indirection. It is a significantly
simpler operation than that of the combiner worklist proper. I suspect
this will also fix some other problems with the combiner.
I think the x86 changes are really minor and uninteresting, but the
avx512 change at least is hiding a "regression" (despite the test case
being just noise, not testing some performance invariant) that might be
looked into. Not sure if any of the others impact specific "important"
code paths, but they didn't look terribly interesting to me, or the
changes were really minor. The consensus in review is to fix any
regressions that show up after the fact here.
Thanks to the other reviewers for checking the output on other
architectures. There is a specific regression on ARM that Tim already
has a fix prepped to commit.
Differential Revision: http://reviews.llvm.org/D4616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213727 91177308-0d34-0410-b5e6-96231b3b80d8
There are a few more cleanups to do, but I ran into some problems
with ext loads and trunc stores, when I tried to change some of the
vector loads and stores from custom to legal, so I wasn't able to
get rid of everything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213552 91177308-0d34-0410-b5e6-96231b3b80d8
This implements a solution for constant initializers suggested
by Vadim Girlin, where we store the data after the shader code
and then use the S_GETPC instruction to compute its address.
This saves use the trouble of creating a new buffer for constant data
and then having to pass the pointer to the kernel via user SGPRs or the
input buffer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213530 91177308-0d34-0410-b5e6-96231b3b80d8
This probably was killed by some generic DAGCombiner
improvements in checking the TargetBooleanContents instead
of just 1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213471 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions can only take a limited input range, and return
the constant value 1 out of range. We should do range reduction to
be able to process arbitrary values. Use a FRACT instruction after
normalization to achieve this. Also add a test for constant folding
with the lowered code with unsafe-fp-math enabled.
v2: use DAG lowering instead of intrinsic, adapt test
v3: calculate constant, fold pattern into instruction definition
v4: misc style fixes, add sin-fold testcase, cosmetics
Patch by Grigori Goronzy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213458 91177308-0d34-0410-b5e6-96231b3b80d8
Actual support for softening f16 operations is still limited, and can be added
when it's needed. But Soften is much closer to being a useful thing to try
than keeping it Legal when no registers can actually hold such values.
Longer term, we probably want something between Soften and Promote semantics
for most targets, it'll be more efficient to promote the 4 basic operations to
f32 than libcall them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213372 91177308-0d34-0410-b5e6-96231b3b80d8
This test is actually going in the opposite direction to what the
filename and function name suggested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213358 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, we don't seem to have a direct truncation, but the
extension can be legally split into two operations so we should
support that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213357 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the two intrinsics @llvm.convert.from.f16 and
@llvm.convert.to.f16 accept types other than simple "float". This is
only strictly needed for the truncate operation, since otherwise
double rounding occurs and there's no way to represent the strict IEEE
conversion. However, for symmetry we allow larger types in the extend
too.
During legalization, we can expand an "fp16_to_double" operation into
two extends for convenience, but abort when the truncate isn't legal. A new
libcall is probably needed here.
Even after this commit, various target tweaks are needed to actually use the
extended intrinsics. I've put these into separate commits for clarity, so there
are no actual tests of f64 conversion here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213248 91177308-0d34-0410-b5e6-96231b3b80d8
