of cross-block live ranges, and allows the bb-at-a-time selector to always
coallesce these away, at isel time.
This reduces the load on the coallescer and register allocator. For example
on a codec on X86, we went from:
1643 asm-printer - Number of machine instrs printed
419 liveintervals - Number of loads/stores folded into instructions
1144 liveintervals - Number of identity moves eliminated after coalescing
1022 liveintervals - Number of interval joins performed
282 liveintervals - Number of intervals after coalescing
1304 liveintervals - Number of original intervals
86 regalloc - Number of times we had to backtrack
1.90232 regalloc - Ratio of intervals processed over total intervals
40 spiller - Number of values reused
182 spiller - Number of loads added
121 spiller - Number of stores added
132 spiller - Number of register spills
6 twoaddressinstruction - Number of instructions commuted to coalesce
360 twoaddressinstruction - Number of two-address instructions
to:
1636 asm-printer - Number of machine instrs printed
403 liveintervals - Number of loads/stores folded into instructions
1155 liveintervals - Number of identity moves eliminated after coalescing
1033 liveintervals - Number of interval joins performed
279 liveintervals - Number of intervals after coalescing
1312 liveintervals - Number of original intervals
76 regalloc - Number of times we had to backtrack
1.88998 regalloc - Ratio of intervals processed over total intervals
1 spiller - Number of copies elided
41 spiller - Number of values reused
191 spiller - Number of loads added
114 spiller - Number of stores added
128 spiller - Number of register spills
4 twoaddressinstruction - Number of instructions commuted to coalesce
356 twoaddressinstruction - Number of two-address instructions
On this testcase, this change provides a modest reduction in spill code,
regalloc iterations, and total instructions emitted. It increases the number
of register coallesces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28115 91177308-0d34-0410-b5e6-96231b3b80d8
scheduler can go into a "vertical mode" (i.e. traversing up the two-address
chain, etc.) when the register pressure is low.
This does seem to reduce the number of spills in the cases I've looked at. But
with x86, it's no guarantee the performance of the code improves.
It can be turned on with -sched-vertically option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28108 91177308-0d34-0410-b5e6-96231b3b80d8
simplifies the MachineCodeEmitter interface just a little bit and makes
BasicBlocks work like constant pools and jump tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28082 91177308-0d34-0410-b5e6-96231b3b80d8
not be 100% dense. Increase the minimum threshold for the number of cases
in a switch statement from 4 to 6 in order to create a jump table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28079 91177308-0d34-0410-b5e6-96231b3b80d8
the heuristic to further reduce spills for several test cases. (Note, it may
not necessarily translate to runtime win!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28076 91177308-0d34-0410-b5e6-96231b3b80d8
1. Change several methods in the MachineCodeEmitter class to be pure virtual.
2. Suck emitConstantPool/initJumpTableInfo into startFunction, removing them
from the MachineCodeEmitter interface, and reducing the amount of target-
specific code.
3. Change the JITEmitter so that it allocates constantpools and jump tables
*right* next to the functions that they belong to, instead of in a separate
pool of memory. This makes all memory for a function be contiguous, and
means the JITEmitter only tracks one block of memory now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28065 91177308-0d34-0410-b5e6-96231b3b80d8
code emission location into the base class, instead of being in the derived classes.
This change means that low-level methods like emitByte/emitWord now are no longer
virtual (yaay for speed), and we now have a framework to support growable code
segments. This implements feature request #1 of PR469.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28059 91177308-0d34-0410-b5e6-96231b3b80d8
instructions in the virtregfolded map that were deleted. Because they
were deleted, newly allocated instructions could end up at the same address,
magically finding themselves in the map. The solution is to remove entries
from the map when we delete the instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28041 91177308-0d34-0410-b5e6-96231b3b80d8
up the schedule. This helps code that looks like this:
loads ...
computations (first set) ...
stores (first set) ...
loads
computations (seccond set) ...
stores (seccond set) ...
Without this change, the stores and computations are more likely to
interleave:
loads ...
loads ...
computations (first set) ...
computations (second set) ...
computations (first set) ...
stores (first set) ...
computations (second set) ...
stores (stores set) ...
This can increase the number of spills if we are unlucky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28033 91177308-0d34-0410-b5e6-96231b3b80d8
But this is incorrect if the spilled value live range extends beyond the
current BB.
It is currently controlled by a temporary option -spiller-check-liveout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28024 91177308-0d34-0410-b5e6-96231b3b80d8
and is already available, instead of falling back to emitting a load, fall
back to emitting a reg-reg copy. This generates significantly better code
for some SSE testcases, as SSE has lots of two-address instructions and
none of them are read/modify/write. As one example, this change does:
pshufd %XMM5, XMMWORD PTR [%ESP + 84], 255
xorps %XMM2, %XMM5
cmpltps %XMM1, %XMM0
- movaps XMMWORD PTR [%ESP + 52], %XMM0
- movapd %XMM6, XMMWORD PTR [%ESP + 52]
+ movaps %XMM6, %XMM0
cmpltps %XMM6, XMMWORD PTR [%ESP + 68]
movapd XMMWORD PTR [%ESP + 52], %XMM6
movaps %XMM6, %XMM0
cmpltps %XMM6, XMMWORD PTR [%ESP + 36]
cmpltps %XMM3, %XMM0
- movaps XMMWORD PTR [%ESP + 20], %XMM0
- movapd %XMM7, XMMWORD PTR [%ESP + 20]
+ movaps %XMM7, %XMM0
cmpltps %XMM7, XMMWORD PTR [%ESP + 4]
movapd XMMWORD PTR [%ESP + 20], %XMM7
cmpltps %XMM4, %XMM0
... which is far better than a store followed by a load!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28001 91177308-0d34-0410-b5e6-96231b3b80d8
