vector lanes can be modeled as zero with a call to the new function that
computes a bit-vector representing that information.
No functionality changed here, but will allow doing more clever things
with the zero-test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218174 91177308-0d34-0410-b5e6-96231b3b80d8
I just tried reproducing some of the optimization failures in README.txt in the
X86 backend, and many of them could not be reproduced. In general the entire
file appears quite bit-rotted, whatever interesting parts remain should be
moved to bugzilla, and the rest deleted. I did not spend the time to do that,
so I just deleted the few I tried reproducing which are obsolete, to save some
time to whoever will find the courage to do it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218170 91177308-0d34-0410-b5e6-96231b3b80d8
it from the shuffle pattern matching logic.
Also cleaned up variable names, comments, etc. No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218152 91177308-0d34-0410-b5e6-96231b3b80d8
lowering to support both anyext and zext and to custom lower for many
different microarchitectures.
Using this allows us to get *exactly* the right code for zext and anyext
shuffles in all the vector sizes. For v16i8, the improvement is *huge*.
The new SSE2 test case added I refused to add before this because it was
sooooo muny instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218143 91177308-0d34-0410-b5e6-96231b3b80d8
to undef lanes as well as defined widenable lanes. This dramatically
improves the lowering we use for undef-shuffles in a zext-ish pattern
for SSE2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218115 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles that are zext-ing.
Not a lot to see here; the undef lane variant is better handled with
pshufd, but this improves the actual zext pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218112 91177308-0d34-0410-b5e6-96231b3b80d8
to the new vector shuffle lowering code.
This allows us to emit PMOVZX variants consistently for patterns where
it is a viable lowering. This instruction is both fast and allows us to
fold loads into it. This only hooks the new lowering up for i16 and i8
element widths, mostly so I could manage the change to the tests. I'll
add the i32 one next, although it is significantly less interesting.
One thing to note is that we already had some tests for these patterns
but those tests had far less horrible instructions. The problem is that
those tests weren't checking the strict start and end of the instruction
sequence. =[ As a consequence something changed in the lowering making
us generate *TERRIBLE* code for these patterns in SSE2 through SSSE3.
I've consolidated all of the tests and spelled out the madness that we
currently emit for these shuffles. I'm going to try to figure out what
has gone wrong here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218102 91177308-0d34-0410-b5e6-96231b3b80d8
There is no purpose in using it for single-input shuffles as
pshufd is just as fast and doesn't tie the two operands. This removes
a substantial amount of wrong-domain blend operations in SSSE3 mode. It
also completes the usage of PALIGNR for integer shuffles and addresses
one of the test cases Quentin hit with the new vector shuffle lowering.
There is still the question of whether and when to use this for floating
point shuffles. It is faster than shufps or shufpd but in the integer
domain. I don't yet really have a good heuristic here for when to use
this instruction for floating point vectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218038 91177308-0d34-0410-b5e6-96231b3b80d8
PALIGNR. This just adds it to the v8i16 and v16i8 lowering steps where
it is completely unmatched. It also introduces the logic for detecting
rotation shuffle masks even in the presence of single input or blend
masks and arbitrarily undef lanes.
I've added fairly comprehensive tests for the matching logic in v8i16
because the tests at that size are much easier to write and manage.
I've not checked the SSE2 code generated for these tests because the
code is *horrible*. It is absolute madness. Testing it will just make
the test brittle without giving any interesting improvements in the
correctness confidence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218013 91177308-0d34-0410-b5e6-96231b3b80d8
This required a new hook called hasLoadLinkedStoreConditional to know whether
to expand atomics to LL/SC (ARM, AArch64, in a future patch Power) or to
CmpXchg (X86).
Apart from that, the new code in AtomicExpandPass is mostly moved from
X86AtomicExpandPass. The main result of this patch is to get rid of that
pass, which had lots of code duplicated with AtomicExpandPass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217928 91177308-0d34-0410-b5e6-96231b3b80d8
the blend that is matched by this are "used" in any sense, and so any
build_vector or other nodes feeding these will already drop other lanes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217855 91177308-0d34-0410-b5e6-96231b3b80d8
matching. This design just fundamentally didn't work because ADDSUB is
available prior to any legal lowerings of BLENDI nodes. Instead, we have
a dedicated ADDSUB synthetic ISD node which is pattern matched trivially
into the instructions. These nodes are then recognized by both the
existing and a trivial new lowering combine in the backend. Removing
these patterns required adding 2 missing shuffle masks to the DAG
combine, without which tests would have failed. Added the masks and
a helpful assert as well to catch if anything ever goes wrong here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217851 91177308-0d34-0410-b5e6-96231b3b80d8
that we don't use VSELECT and directly emit an addsub synthetic node.
Also remove a stale comment referencing VSELECT.
The test case is updated to use 'core2' which only has SSE3, not SSE4.1,
and it still passes. Previously it would not because we lacked
sufficient blend support to legalize the VSELECT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217849 91177308-0d34-0410-b5e6-96231b3b80d8
ADDSUBPD nodes out of blends of adds and subs.
This allows us to actually form these instructions with SSE3 rather than
only forming them when we had both SSE3 for the ADDSUB instructions and
SSE4.1 for the blend instructions. ;] Kind-of important.
I've adjusted the CPU requirements on one of the tests to demonstrate
this kicking in nicely for an SSE3 cpu configuration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217848 91177308-0d34-0410-b5e6-96231b3b80d8
introducing a synthetic X86 ISD node representing this generic
operation.
The relevant patterns for mapping these nodes into the concrete
instructions are also added, and a gnarly bit of C++ code in the
target-specific DAG combiner is replaced with simple code emitting this
primitive.
The next step is to generically combine blends of adds and subs into
this node so that we can drop the reliance on an SSE4.1 ISD node
(BLENDI) when matching an SSE3 feature (ADDSUB).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217819 91177308-0d34-0410-b5e6-96231b3b80d8
Peephole optimization was folding MOVSDrm, which is a zero-extending double
precision floating point load, into ADDPDrr, which is a SIMD add of two packed
double precision floating point values.
(before)
%vreg21<def> = MOVSDrm <fi#0>, 1, %noreg, 0, %noreg; mem:LD8[%7](align=16)(tbaa=<badref>) VR128:%vreg21
%vreg23<def,tied1> = ADDPDrr %vreg20<tied0>, %vreg21; VR128:%vreg23,%vreg20,%vreg21
(after)
%vreg23<def,tied1> = ADDPDrm %vreg20<tied0>, <fi#0>, 1, %noreg, 0, %noreg; mem:LD8[%7](align=16)(tbaa=<badref>) VR128:%vreg23,%vreg20
X86InstrInfo::foldMemoryOperandImpl already had the logic that prevented this
from happening. However the check wasn't being conducted for loads from stack
objects. This commit factors out the logic into a new function and uses it for
checking loads from stack slots are not zero-extending loads.
rdar://problem/18236850
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217799 91177308-0d34-0410-b5e6-96231b3b80d8
when SSE4.1 is available.
This removes a ton of domain crossing from blend code paths that were
ending up in the floating point code path.
This is just the tip of the iceberg though. The real switch is for
integer blend lowering to more actively rely on this instruction being
available so we don't hit shufps at all any longer. =] That will come in
a follow-up patch.
Another place where we need better support is for using PBLENDVB when
doing so avoids the need to have two complementary PSHUFB masks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217767 91177308-0d34-0410-b5e6-96231b3b80d8
instructions from the relevant shuffle patterns.
This is the last tweak I'm aware of to generate essentially perfect
v4f32 and v2f64 shuffles with the new vector shuffle lowering up through
SSE4.1. I'm sure I've missed some and it'd be nice to check since v4f32
is amenable to exhaustive exploration, but this is all of the tricks I'm
aware of.
With AVX there is a new trick to use the VPERMILPS instruction, that's
coming up in a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217761 91177308-0d34-0410-b5e6-96231b3b80d8
instructions when it finds an appropriate pattern.
These are lovely instructions, and its a shame to not use them. =] They
are fast, and can hand loads folded into their operands, etc.
I've also plumbed the comment shuffle decoding through the various
layers so that the test cases are printed nicely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217758 91177308-0d34-0410-b5e6-96231b3b80d8
AVX is available, and generally tidy up things surrounding UNPCK
formation.
Originally, I was thinking that the only advantage of PSHUFD over UNPCK
instruction variants was its free copy, and otherwise we should use the
shorter encoding UNPCK instructions. This isn't right though, there is
a larger advantage of being able to fold a load into the operand of
a PSHUFD. For UNPCK, the operand *must* be in a register so it can be
the second input.
This removes the UNPCK formation in the target-specific DAG combine for
v4i32 shuffles. It also lifts the v8 and v16 cases out of the
AVX-specific check as they are potentially replacing multiple
instructions with a single instruction and so should always be valuable.
The floating point checks are simplified accordingly.
This also adjusts the formation of PSHUFD instructions to attempt to
match the shuffle mask to one which would fit an UNPCK instruction
variant. This was originally motivated to allow it to match the UNPCK
instructions in the combiner, but clearly won't now.
Eventually, we should add a MachineCombiner pass that can form UNPCK
instructions post-RA when the operand is known to be in a register and
thus there is no loss.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217755 91177308-0d34-0410-b5e6-96231b3b80d8
'punpckhwd' instructions when suitable rather than falling back to the
generic algorithm.
While we could canonicalize to these patterns late in the process, that
wouldn't help when the freedom to use them is only visible during
initial lowering when undef lanes are well understood. This, it turns
out, is very important for matching the shuffle patterns that are used
to lower sign extension. Fixes a small but relevant regression in
gcc-loops with the new lowering.
When I changed this I noticed that several 'pshufd' lowerings became
unpck variants. This is bad because it removes the ability to freely
copy in the same instruction. I've adjusted the widening test to handle
undef lanes correctly and now those will correctly continue to use
'pshufd' to lower. However, this caused a bunch of churn in the test
cases. No functional change, just churn.
Both of these changes are part of addressing a general weakness in the
new lowering -- it doesn't sufficiently leverage undef lanes. I've at
least a couple of patches that will help there at least in an academic
sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217752 91177308-0d34-0410-b5e6-96231b3b80d8
These are super simple. They even take precedence over crazy
instructions like INSERTPS because they have very high throughput on
modern x86 chips.
I still have to teach the integer shuffle variants about this to avoid
so many domain crossings. However, due to the particular instructions
available, that's a touch more complex and so a separate patch.
Also, the backend doesn't seem to realize it can commute blend
instructions by negating the mask. That would help remove a number of
copies here. Suggestions on how to do this welcome, it's an area I'm
less familiar with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217744 91177308-0d34-0410-b5e6-96231b3b80d8
support transforming the forms from the new vector shuffle lowering to
use 'movddup' when appropriate.
A bunch of the cases where we actually form 'movddup' don't actually
show up in the test results because something even later than DAG
legalization maps them back to 'unpcklpd'. If this shows back up as
a performance problem, I'll probably chase it down, but it is at least
an encoded size loss. =/
To make this work, also always do this canonicalizing step for floating
point vectors where the baseline shuffle instructions don't provide any
free copies of their inputs. This also causes us to canonicalize
unpck[hl]pd into mov{hl,lh}ps (resp.) which is a nice encoding space
win.
There is one test which is "regressed" by this: extractelement-load.
There, the test case where the optimization it is testing *fails*, the
exact instruction pattern which results is slightly different. This
should probably be fixed by having the appropriate extract formed
earlier in the DAG, but that would defeat the purpose of the test.... If
this test case is critically important for anyone, please let me know
and I'll try to work on it. The prior behavior was actually contrary to
the comment in the test case and seems likely to have been an accident.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217738 91177308-0d34-0410-b5e6-96231b3b80d8
r189189 implemented AVX512 unpack by essentially performing a 256-bit unpack
between the low and the high 256 bits of src1 into the low part of the
destination and another unpack of the low and high 256 bits of src2 into the
high part of the destination.
I don't think that's how unpack works. AVX512 unpack simply has more 128-bit
lanes but other than it works the same way as AVX. So in each 128-bit lane,
we're always interleaving certain parts of both operands rather different
parts of one of the operands.
E.g. for this:
__v16sf a = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
__v16sf b = { 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 };
__v16sf c = __builtin_shufflevector(a, b, 0, 8, 1, 9, 4, 12, 5, 13, 16,
24, 17, 25, 20, 28, 21, 29);
we generated punpcklps (notice how the elements of a and b are not interleaved
in the shuffle). In turn, c was set to this:
0 16 1 17 4 20 5 21 8 24 9 25 12 28 13 29
Obviously this should have just returned the mask vector of the shuffle
vector.
I mostly reverted this change and made sure the original AVX code worked
for 512-bit vectors as well.
Also updated the tests because they matched the logic from the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217602 91177308-0d34-0410-b5e6-96231b3b80d8
This is a first pass at a scheduling model for Jaguar.
It's structured largely on the existing SandyBridge and SLM sched models.
Using this model, in addition to turning on the PostRA scheduler, results in
some perf wins on internal and 3rd party benchmarks. There's not much difference
in LLVM's test-suite benchmarking subset of tests.
Differential Revision: http://reviews.llvm.org/D5229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217457 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In AT&T annotation for both x86_64 and x32 calls should be printed as
callq in assembly. It's only a matter of correct mnemonic, object output
is ok.
Test Plan: trivial test added
Reviewers: nadav, dschuff, craig.topper
Subscribers: llvm-commits, zinovy.nis
Differential Revision: http://reviews.llvm.org/D5213
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217435 91177308-0d34-0410-b5e6-96231b3b80d8
When compiling without SSE2, isTruncStoreLegal(F64, F32) would return Legal, whereas with SSE2 it would return Expand. And since the Target doesn't seem to actually handle a truncstore for double -> float, it would just output a store of a full double in the space for a float hence overwriting other bits on the stack.
Patch by Luqman Aden!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217410 91177308-0d34-0410-b5e6-96231b3b80d8
I hadn't actually run all the tests yet and these combines have somewhat
surprisingly far reaching effects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217333 91177308-0d34-0410-b5e6-96231b3b80d8
support for MOVDDUP which is really important for matrix multiply style
operations that do lots of non-vector-aligned load and splats.
The original motivation was to add support for MOVDDUP as the lack of it
regresses matmul_f64_4x4 by 5% or so. However, all of the rules here
were somewhat suspicious.
First, we should always be using the floating point domain shuffles,
regardless of how many copies we have to make as a movapd is *crazy*
faster than the domain switching cost on some chips. (Mostly because
movapd is crazy cheap.) Because SHUFPD can't do the copy-for-free trick
of the PSHUF instructions, there is no need to avoid canonicalizing on
UNPCK variants, so do that canonicalizing. This also ensures we have the
chance to form MOVDDUP. =]
Second, we assume SSE2 support when doing any vector lowering, and given
that we should just use UNPCKLPD and UNPCKHPD as they can operate on
registers or memory. If vectors get spilled or come from memory at all
this is going to allow the load to be folded into the operation. If we
want to optimize for encoding size (the only difference, and only
a 2 byte difference) it should be done *much* later, likely after RA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217332 91177308-0d34-0410-b5e6-96231b3b80d8
parsing (and latent bug in the instruction definitions).
This is effectively a revert of r136287 which tried to address
a specific and narrow case of immediate operands failing to be accepted
by x86 instructions with a pretty heavy hammer: it introduced a new kind
of operand that behaved differently. All of that is removed with this
commit, but the test cases are both preserved and enhanced.
The core problem that r136287 and this commit are trying to handle is
that gas accepts both of the following instructions:
insertps $192, %xmm0, %xmm1
insertps $-64, %xmm0, %xmm1
These will encode to the same byte sequence, with the immediate
occupying an 8-bit entry. The first form was fixed by r136287 but that
broke the prior handling of the second form! =[ Ironically, we would
still emit the second form in some cases and then be unable to
re-assemble the output.
The reason why the first instruction failed to be handled is because
prior to r136287 the operands ere marked 'i32i8imm' which forces them to
be sign-extenable. Clearly, that won't work for 192 in a single byte.
However, making thim zero-extended or "unsigned" doesn't really address
the core issue either because it breaks negative immediates. The correct
fix is to make these operands 'i8imm' reflecting that they can be either
signed or unsigned but must be 8-bit immediates. This patch backs out
r136287 and then changes those places as well as some others to use
'i8imm' rather than one of the extended variants.
Naturally, this broke something else. The custom DAG nodes had to be
updated to have a much more accurate type constraint of an i8 node, and
a bunch of Pat immediates needed to be specified as i8 values.
The fallout didn't end there though. We also then ceased to be able to
match the instruction-specific intrinsics to the instructions so
modified. Digging, this is because they too used i32 rather than i8 in
their signature. So I've also switched those intrinsics to i8 arguments
in line with the instructions.
In order to make the intrinsic adjustments of course, I also had to add
auto upgrading for the intrinsics.
I suspect that the intrinsic argument types may have led everything down
this rabbit hole. Pretty happy with the result.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217310 91177308-0d34-0410-b5e6-96231b3b80d8
computation was totally wrong, but somehow it didn't really show up with
llc.
I've added an assert that triggers on multiple existing test cases and
updated one of them to show the correct value.
There appear to still be more bugs lurking around insertps's mask. =/
However, note that this only really impacts the new vector shuffle
lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217289 91177308-0d34-0410-b5e6-96231b3b80d8
shuffle lowering for integer vectors and share it from v4i32, v8i16, and
v16i8 code paths.
Ironically, the SSE2 v16i8 code for this is now better than the SSSE3!
=] Will have to fix the SSSE3 code next to just using a single pshufb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217240 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an issue where MS inline assembly containing xgetbv wouldn't
be marked as clobbering EAX:EDX. Test for that forthcoming on the Clang
side.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217173 91177308-0d34-0410-b5e6-96231b3b80d8
vzext patterns and insert-element patterns that for SSE4 have dedicated
instructions.
With this we can enable the experimental mode in a regression test that
happens to cover some of the past set of issues. You can see that the
new logic does significantly better here on the floating point cases.
A follow-up to this change and the previous ones will hoist the logic
into helpers so it can be shared across element type sizes as in this
particular case it generalizes cleanly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217136 91177308-0d34-0410-b5e6-96231b3b80d8
