We should update the usages to all of the results;
otherwise, we might get assertion failure or SEGV during
the type legalization of ATOMIC_CMP_SWAP_WITH_SUCCESS
with two or more illegal types.
For example, in the following sequence, both i8 and i1
might be illegal in some target, e.g. armv5, mipsel, mips64el,
%0 = cmpxchg i8* %ptr, i8 %desire, i8 %new monotonic monotonic
%1 = extractvalue { i8, i1 } %0, 1
Since both i8 and i1 should be legalized, the corresponding
ATOMIC_CMP_SWAP_WITH_SUCCESS dag will be checked/replaced/updated
twice.
If we don't update the usage to *ALL* of the results in the
first round, the DAG for extractvalue might be processed earlier.
The GetPromotedInteger() will result in assertion failure,
because its operand (i.e. the success bit of cmpxchg) is not
promoted beforehand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213569 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit this value when we need to contradict the default value. This
restores support for binutils 2.24.
When a suitable binutils has been released we can resume unconditionally
emitting .module directives. This is preferable to omitting the .module
directives since the .module directives protect against, for example,
accidentally assembling FP32 code with -mfp64 and producing an unusuable object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213548 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit this directive when we need to contradict the default value (e.g.
-mno-odd-spreg is given) or an option changed the default value (e.g. -mfpxx
is given).
This restores support for the currently available head of binutils. However,
at this point binutils 2.24 is still not sufficient since it does not support
'.module fp=...'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213511 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is because the FP64A the hardware will redirect 32-bit reads/writes
from/to odd-numbered registers to the upper 32-bits of the corresponding
even register. In effect, simulating FR=0 mode when FR=0 mode is not
available.
Unfortunately, we have to make the decision to avoid mfc1/mtc1 before
register allocation so we currently do this for even registers too.
FPXX has a similar requirement on 32-bit architectures that lack
mfhc1/mthc1 so this patch also handles the affected moves from the FPU for
FPXX too. Moves to the FPU were supported by an earlier commit.
Differential Revision: http://reviews.llvm.org/D4484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212938 91177308-0d34-0410-b5e6-96231b3b80d8
enabled and mthc1 and dmtc1 are not available (e.g. on MIPS32r1)
This prevents the upper 32-bits of a double precision value from being moved to
the FPU with mtc1 to an odd-numbered FPU register. This is necessary to ensure
that the code generated executes correctly regardless of the current FPU mode.
MIPS32r2 and above continues to use mtc1/mthc1, while MIPS-IV and above continue
to use dmtc1.
Differential Revision: http://reviews.llvm.org/D4465
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212717 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
On MIPS32r6/MIPS64r6, floating point comparisons return 0 or -1 but integer
comparisons return 0 or 1.
Updated the various uses of getBooleanContents. Two simplifications had to be
disabled when float and int boolean contents differ:
- ScalarizeVecRes_VSELECT except when the kind of boolean contents is trivially
discoverable (i.e. when the condition of the VSELECT is a SETCC node).
- visitVSELECT (select C, 0, 1) -> (xor C, 1).
Come to think of it, this one could test for the common case of 'C'
being a SETCC too.
Preserved existing behaviour for all other targets and updated the affected
MIPS32r6/MIPS64r6 tests. This also fixes the pi benchmark where the 'low'
variable was counting in the wrong direction because it thought it could simply
add the result of the comparison.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D4389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212697 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This completes the change to use JALR instead of JR on MIPS32r6/MIPS64r6.
Reviewers: jkolek, vmedic, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4269
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212605 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
RET, and RET_MM have been replaced by a pseudo named PseudoReturn.
In addition a version with a 64-bit GPR named PseudoReturn64 has been
added.
Instruction selection for a return matches RetRA, which is expanded post
register allocation to PseudoReturn/PseudoReturn64. During MipsAsmPrinter,
this PseudoReturn/PseudoReturn64 are emitted as:
- (JALR64 $zero, $rs) on MIPS64r6
- (JALR $zero, $rs) on MIPS32r6
- (JR_MM $rs) on microMIPS
- (JR $rs) otherwise
On MIPS32r6/MIPS64r6, 'jr $rs' is an alias for 'jalr $zero, $rs'. To aid
development and review (specifically, to ensure all cases of jr are
updated), these aliases are temporarily named 'r6.jr' instead of 'jr'.
A follow up patch will change them back to the correct mnemonic.
Added (JALR $zero, $rs) to MipsNaClELFStreamer's definition of an indirect
jump, and removed it from its definition of a call.
Note: I haven't accounted for MIPS64 in MipsNaClELFStreamer since it's
doesn't appear to account for any MIPS64-specifics.
The return instruction created as part of eh_return expansion is now expanded
using expandRetRA() so we use the right return instruction on MIPS32r6/MIPS64r6
('jalr $zero, $rs').
Also, fixed a misuse of isABI_N64() to detect 64-bit wide registers in
expandEhReturn().
Reviewers: jkolek, vmedic, mseaborn, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212604 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The tests in this directory are intended to test a single IR instruction
with as few dependencies on other instructions as possible. The aim is to
be very confident that each LLVM-IR instruction is implemented correctly and
with the optimal sequence of instructions, as well as to make it easy to tell
what is tested, and make it easier to bring up new ISA revisions in the
future. This gives us a good foundation on which to test bigger things.
These particular tests will allow testing that MIPS32r6/MIPS64r6 generate
the correct return instruction for returns, calls, and indirect branches.
This will be a bit tricky since the assembly text is identical but the
instruction is actually different. On MIPS32r6/MIPS64r6 'jr $rs' has been
removed in favour of the equivalent 'jalr $zero, $rs'. 'jr $rs' remains as
an alias for 'jalr $zero, $rs'.
Differential Revision: http://reviews.llvm.org/D4266
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212345 91177308-0d34-0410-b5e6-96231b3b80d8
In assembly the expression a=b is parsed as an assignment, so it should be
printed as one.
This remove a truly horrible hack for producing a label with "a=.". It would
be used by codegen but would never be reached by the asm parser. Sorry I
missed this when it was first committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211639 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patches allows non conversions like i1=i2; where both are global ints.
In addition, arithmetic and other things start to work since fast-isel will use
existing patterns for non fast-isel from tablegen files where applicable.
In addition i8, i16 will work in this limited context for assignment without the need
for sign extension (zero or signed). It does not matter how i8 or i16 are loaded (zero or sign extended)
since only the 8 or 16 relevant bits are used and clang will ask for sign extension before using them in
arithmetic. This is all made more complete in forthcoming patches.
for example:
int i, j=1, k=3;
void foo() {
i = j + k;
}
Keep in mind that this pass is not enabled right now and is an experimental pass
It can only be enabled with a hidden option to llvm of -mips-fast-isel.
Test Plan: Run test-suite, loadstore2.ll and I will run some executable tests.
Reviewers: dsanders
Subscribers: mcrosier
Differential Revision: http://reviews.llvm.org/D3856
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211061 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211019 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211018 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is very little difference between the big and little endian cases in
test/CodeGen/Mips/atomic.ll. Merge them together using multiple
FileCheck prefixes.
Depends on D4117
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4118
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211013 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a weak variant of the cmpxchg operation, as described
in C++11. A cmpxchg instruction with this modifier is permitted to
fail to store, even if the comparison indicated it should.
As a result, cmpxchg instructions must return a flag indicating
success in addition to their original iN value loaded. Thus, for
uniformity *all* cmpxchg instructions now return "{ iN, i1 }". The
second flag is 1 when the store succeeded.
At the DAG level, a new ATOMIC_CMP_SWAP_WITH_SUCCESS node has been
added as the natural representation for the new cmpxchg instructions.
It is a strong cmpxchg.
By default this gets Expanded to the existing ATOMIC_CMP_SWAP during
Legalization, so existing backends should see no change in behaviour.
If they wish to deal with the enhanced node instead, they can call
setOperationAction on it. Beware: as a node with 2 results, it cannot
be selected from TableGen.
Currently, no use is made of the extra information provided in this
patch. Test updates are almost entirely adapting the input IR to the
new scheme.
Summary for out of tree users:
------------------------------
+ Legacy Bitcode files are upgraded during read.
+ Legacy assembly IR files will be invalid.
+ Front-ends must adapt to different type for "cmpxchg".
+ Backends should be unaffected by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210903 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Also tightened up the acceptable condition operand for these instructions
on MIPS-I to MIPS-III. Support for $fcc[1-7] was added in MIPS-IV. Prior
to that only $fcc0 is acceptable.
We currently don't optimize (BEQZ (NOT $a), $target) and similar. It's
probably best to do this in InstCombine.
Depends on D4111
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4112
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Folded mips64-fp-indexed-ls.ll into fp-indexed-ls.ll. To do so, the zext's in
mips64-fp-indexed-ls.ll were changed to implicit sign extensions (performed
by getelementptr). This does not affect the purpose of the test.
Depends on D4004
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4110
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210784 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
c.cond.fmt has been replaced by cmp.cond.fmt. Where c.cond.fmt wrote to
dedicated condition registers, cmp.cond.fmt writes 1 or 0 to normal FGR's
(like the GPR comparisons).
mov[fntz] have been replaced by seleqz and selnez. These instructions
conditionally zero a register based on a bool in a GPR. The results can
then be or'd together to act as a select without, for example, requiring a third
register read port.
mov[fntz].[ds] have been replaced with sel.[ds]
MIPS64r6 currently generates unnecessary sign-extensions for most selects.
This is because the result of a SETCC is currently an i32. Bits 32-63 are
undefined in i32 and the behaviour of seleqz/selnez would otherwise depend
on undefined bits. Later, we will fix this by making the result of SETCC an
i64 on MIPS64 targets.
Depends on D3958
Reviewers: jkolek, vmedic, zoran.jovanovic
Reviewed By: vmedic, zoran.jovanovic
Differential Revision: http://reviews.llvm.org/D4003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210777 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
To make this work for both AFGR64 and FGR64 register sets, I've had to make the
instruction definition consistent with the white lie (that it reads the lower
32-bits of the register) when they are generated by expandBuildPairF64().
Corrected the definition of hasMips32r2() and hasMips64r2() to include
MIPS32r6 and MIPS64r6.
Depends on D3956
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3957
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210771 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch updates both the assembler and the code generator.
MIPS32r6/MIPS64r6 replaces them with maddf.[ds] and msubf.[ds] which are fused
multiply-add/sub operations. We don't emit these yet, this patch only prevents the removed instructions from being emitted.
Depends on D3955
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3956
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210763 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch disables madd/maddu/msub/msubu in both the assembler and code
generator.
Depends on D3896
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3955
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210762 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The accumulator-based (HI/LO) multiplies and divides from earlier ISA's have
been removed and replaced with GPR-based equivalents. For example:
div $1, $2
mflo $3
is now:
div $3, $1, $2
This patch disables the accumulator-based multiplies and divides for
MIPS32r6/MIPS64r6 and uses the GPR-based equivalents instead.
Renamed expandPseudoDiv to insertDivByZeroTrap to better describe the
behaviour of the function.
MipsDelaySlotFiller now invalidates the liveness information when moving
instructions to the delay slot. Without this, divrem.ll will abort since
%GP ends up used before it is defined.
Reviewers: vmedic, zoran.jovanovic, jkolek
Reviewed By: jkolek
Differential Revision: http://reviews.llvm.org/D3896
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210760 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MIPS32r6/MIPS64r6 support has not been added yet.
inlineasm-cnstrnt-reg.ll:
Explicitly specify the CPU since it will not work on MIPS32r6/MIPS64r6
when -integrated-as is the default. We can't change the mnemonic since the
LO register is an implicit def of mtlo and MIPS32r6/MIPS64r6 has no
instructions that use LO.
2008-08-01-AsmInline.ll:
Explicitly specify the CPU since MIPS32r6/MIPS64r6 will correctly emit
different code and this is a regression test.
mips64instrs.ll and mips64muldiv.ll
Check registers and the way the multiply is used in m1
divrem.ll
Check registers and use multiple filecheck prefixes to limit redundancy
Reviewers: vmedic, jkolek, zoran.jovanovic, matheusalmeida
Reviewed By: matheusalmeida
Subscribers: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3894
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210656 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implement materialize of floating point literals in Mips Fast-Isel
Reopened version of D3659
Test Plan: simplestorefp1.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4071
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210546 91177308-0d34-0410-b5e6-96231b3b80d8
The SelectionDAG bad a special case for ISD::SELECT_CC, where it would
allow targets to specify:
setOperationAction(ISD::SELECT_CC, MVT::Other, Expand);
to indicate that they wanted to expand ISD::SELECT_CC for all types.
This wasn't applied correctly everywhere, and it makes writing new
DAG patterns with ISD::SELECT_CC difficult.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210541 91177308-0d34-0410-b5e6-96231b3b80d8
1) The commit was made despite profound lack of understanding:
"I did not understand the comment about using dyn_cast instead of isa. I will
commit as is and make the update after. You can explain what you meant to me."
Commit first, understand later isn't OK.
2) Review comments were simply ignored:
"Can you edit the summary to describe what the patch is for? It appears to be
a list of commits at the moment."
3) The patch got LGTM'd off-list without any indication of readiness.
4) The public mailing list was excluded from patch review so all of this was
hidden from the community.
This reverts commit r210414.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210424 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
start to do simple constants
finish simplestore
add test case
format
Merge branch 'master' into 1756_8
Add basic functionality for assignment of ints. This creates a lot of core infrastructure in which to add, with little effort, quite a bit more to mips fast-isel
Merge branch 'master' into 1756_8
Add basic functionality for assignment of ints. This creates a lot of core infrastructure in which to add, with little effort, quite a bit more to mips fast-isel
in progress
finish integer materialize
test cases
test cases
in progress
Finish up fast-isel materialize for ints.
Finish materialize for ints
test cases
simplestorei.ll
Merge branch 'master' into 1756_8
fix fp constants for fast-isel
Merge branch '1758_1' of dmz-portal.mips.com:llvm into 1758_1
in progress
lastest for fp materialization
clean up
Merge branch 'master' into 1758_1
formatting
add test case
finish test case
Merge branch 'master' into 1758_2
Test Plan:
simplestore.ll
simplestore.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210414 91177308-0d34-0410-b5e6-96231b3b80d8
For MIPS, we have to encode the personality routine with
an indirect pointer to absptr; otherwise, some link warning
warning will be raised, and the program might crash in some
early MIPS Android device.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209907 91177308-0d34-0410-b5e6-96231b3b80d8
This matches gcc's behavior. It also seems natural given that aliases
contain other properties that govern how it is accessed (linkage,
visibility, dll storage).
Clang still has to be updated to expose this feature to C.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209759 91177308-0d34-0410-b5e6-96231b3b80d8
%higher and %highest can have non-zero values only for offsets greater
than 2GB, which is highly unlikely, if not impossible when compiling a
single function. This makes long branch for MIPS64 3 instructions smaller.
Differential Revision: http://llvm-reviews.chandlerc.com/D3281.diff
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209678 91177308-0d34-0410-b5e6-96231b3b80d8
This matches both what we do for the non-thread case and what gcc does.
With this patch clang would match gcc's behaviour in
static __thread int a = 42;
extern __thread int b __attribute__((alias("a")));
int *f(void) { return &a; }
int *g(void) { return &b; }
if not for pr19843. Manually writing the IL does produce the same access modes.
It is also a step in the direction of fixing pr19844.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209543 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Instead the system is required to provide some means of handling unaligned
load/store without special instructions. Options include full hardware
support, full trap-and-emulate, and hybrids such as hardware support within
a cache line and trap-and-emulate for multi-line accesses.
MipsSETargetLowering::allowsUnalignedMemoryAccesses() has been configured to
assume that unaligned accesses are 'fast' on the basis that I expect few
hardware implementations will opt for pure-software handling of unaligned
accesses. The ones that do handle it purely in software can override this.
mips64-load-store-left-right.ll has been merged into load-store-left-right.ll
The stricter testing revealed a Bits!=Bytes bug in passByValArg(). This has
been fixed and the variables renamed to clarify the units they hold.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3872
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209512 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
* Split into two functions, one to test each struct.
* R0 and R2 must be defined by an lw with a %got reference to the correct
symbol.
* Test for $4 (first argument) where appropriate instead of accepting any
register.
* Test that the two lbu's are correctly combined into $4
Depends on D3844
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3845
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209424 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
lwl and lwr are not available in MIPS32r6/MIPS64r6. The purpose of the test
is to check that the '$1' expands to '0($x)' rather than to test something related
to the lwl or lwr instructions so we can simply switch to lw.
Depends on D3842
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209423 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is necessary so that they do not fail on MIPS32r6/MIPS64r6 when
-integrated-as is enabled by default and we correctly detect the host CPU.
No functional change since these tests are testing the behaviour of the
constraint used for the third operand rather than the mnemonic.
Depends on D3842
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3843
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209421 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC always places the implicit sret parameter after the implicit this
parameter of instance methods. We used to handle this for
x86_thiscallcc by allocating the sret parameter on the stack and leaving
the this pointer in ecx, but that doesn't handle alternative calling
conventions like cdecl, stdcall, fastcall, or the win64 convention.
Instead, change the verifier to allow sret on the second parameter.
This also requires changing the Mips and X86 backends to return the
argument with the sret parameter, instead of assuming that the sret
parameter comes first.
The Sparc backend also returns sret parameters in a register, but I
wasn't able to update it to handle secondary sret parameters. It
currently calls report_fatal_error if you feed it an sret in the second
parameter.
Reviewers: rafael.espindola, majnemer
Differential Revision: http://reviews.llvm.org/D3617
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208453 91177308-0d34-0410-b5e6-96231b3b80d8
