Daniel Sanders 8007133f3e [mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6 ...

Summary:
c.cond.fmt has been replaced by cmp.cond.fmt. Where c.cond.fmt wrote to
dedicated condition registers, cmp.cond.fmt writes 1 or 0 to normal FGR's
(like the GPR comparisons).

mov[fntz] have been replaced by seleqz and selnez. These instructions
conditionally zero a register based on a bool in a GPR. The results can
then be or'd together to act as a select without, for example, requiring a third
register read port.

mov[fntz].[ds] have been replaced with sel.[ds]

MIPS64r6 currently generates unnecessary sign-extensions for most selects.
This is because the result of a SETCC is currently an i32. Bits 32-63 are
undefined in i32 and the behaviour of seleqz/selnez would otherwise depend
on undefined bits. Later, we will fix this by making the result of SETCC an
i64 on MIPS64 targets.

Depends on D3958

Reviewers: jkolek, vmedic, zoran.jovanovic

Reviewed By: vmedic, zoran.jovanovic

Differential Revision: http://reviews.llvm.org/D4003

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210777 91177308-0d34-0410-b5e6-96231b3b80d8

2014-06-12 13:39:06 +00:00

..

cconv

[mips] Correct r206370 to account for non-Linux targets using the small data section.

2014-04-16 12:29:08 +00:00

Fast-ISel

[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64

2014-06-12 11:55:58 +00:00

mips32r6

[mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6

2014-05-09 09:46:21 +00:00

mips64r6

[mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6

2014-05-09 09:46:21 +00:00

msa

[mips][msa] Fix vector insertions where the index is variable

2014-04-30 12:09:32 +00:00

2008-06-05-Carry.ll

…

2008-07-03-SRet.ll

…

2008-07-06-fadd64.ll

…

2008-07-07-Float2Int.ll

…

2008-07-07-FPExtend.ll

…

2008-07-07-IntDoubleConvertions.ll

…

2008-07-15-InternalConstant.ll

…

2008-07-15-SmallSection.ll

…

2008-07-16-SignExtInReg.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

2008-07-22-Cstpool.ll

…

2008-07-23-fpcmp.ll

…

2008-07-29-icmp.ll

…

2008-07-31-fcopysign.ll

…

2008-08-01-AsmInline.ll

[mips][mips64r6] Improve tests affected by the changes to multiplies and divides

2014-06-11 15:48:00 +00:00

2008-08-03-fabs64.ll

…

2008-08-03-ReturnDouble.ll

…

2008-08-04-Bitconvert.ll

…

2008-08-06-Alloca.ll

…

2008-08-07-CC.ll

…

2008-08-07-FPRound.ll

…

2008-08-08-bswap.ll

…

2008-08-08-ctlz.ll

…

2008-10-13-LegalizerBug.ll

…

2008-11-10-xint_to_fp.ll

…

2009-11-16-CstPoolLoad.ll

[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.

2014-02-20 14:58:19 +00:00

2010-07-20-Switch.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

2010-11-09-CountLeading.ll

…

2010-11-09-Mul.ll

…

2011-05-26-BranchKillsVreg.ll

…

2012-12-12-ExpandMemcpy.ll

Fix a logic bug in inline expansion of memcpy / memset with an overlapping

2012-12-12 20:43:23 +00:00

2013-11-18-fp64-const0.ll

[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64

2014-06-12 11:55:58 +00:00

abicalls.ll

[mips] Fix emission of '.option pic0' for MIPS-IV.

2014-04-16 13:58:57 +00:00

addc.ll

…

addi.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

addressing-mode.ll

Initial implementation of MipsTargetLowering::isLegalAddressingMode.

2012-11-17 00:25:41 +00:00

align16.ll

Last change for mips16 prolog/epilog cleanup and optimization.

2013-12-15 20:49:30 +00:00

alloca16.ll

Last change for mips16 prolog/epilog cleanup and optimization.

2013-12-15 20:49:30 +00:00

alloca.ll

TBAA: remove !tbaa from testing cases if not used.

2013-04-30 17:52:57 +00:00

analyzebranch.ll

…

and1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

asm-large-immediate.ll

…

atomic.ll

IR: add a second ordering operand to cmpxhg for failure

2014-03-11 10:48:52 +00:00

atomicops.ll

IR: add a second ordering operand to cmpxhg for failure

2014-03-11 10:48:52 +00:00

beqzc1.ll

Make all the conditional Mips 16 branches get initially set for the

2013-11-15 02:21:52 +00:00

beqzc.ll

Make all the conditional Mips 16 branches get initially set for the

2013-11-15 02:21:52 +00:00

biggot.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

blez_bgez.ll

[mips] Make mips64 the default CPU for the mips64 architecture

2014-02-20 13:13:33 +00:00

blockaddr.ll

[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.

2014-02-20 14:58:19 +00:00

br-jmp.ll

Expand pseudos/macros for Selt. This is the last of the complex

2013-02-23 03:09:56 +00:00

brconeq.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brconeqk.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brconeqz.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brconge.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brcongt.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brconle.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brconlt.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brconne.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brconnek.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brconnez.ll

Add conditional branch instructions and their patterns.

2012-10-17 22:29:54 +00:00

brdelayslot.ll

[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out

2013-09-28 00:12:32 +00:00

brind.ll

Implement brind operator for mips16.

2012-10-28 23:08:07 +00:00

brsize3.ll

Take care of long short branch immediate instructions for mips16 in

2013-11-13 23:52:18 +00:00

brsize3a.ll

Take care of long short branch immediate instructions for mips16 in

2013-11-13 23:52:18 +00:00

bswap.ll

[mips] Check emitted code for llvm.bswap.i32 on MIPS16/MIPS64 and llvm.bswap.i64 on MIPS16.

2014-03-31 11:00:04 +00:00

buildpairextractelementf64.ll

[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64

2014-06-12 11:55:58 +00:00

cache-intrinsic.ll

Add @llvm.clear_cache builtin

2014-03-26 12:52:28 +00:00

call-optimization.ll

[mips] Fix test case.

2013-12-07 02:48:29 +00:00

check-noat.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

ci2.ll

Fix a funny bug I introduced during conversion of ARM constant islands to Mips.

2013-11-24 02:53:09 +00:00

cmov.ll

[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6

2014-06-12 13:39:06 +00:00

cmplarge.ll

TBAA: remove !tbaa from testing cases when they are not needed.

2013-09-30 18:17:35 +00:00

const1.ll

Make first substantial checkin of my port of ARM constant islands code to Mips.

2013-10-27 21:57:36 +00:00

const4a.ll

Fix broken CHECK lines.

2014-01-11 21:06:00 +00:00

const6.ll

Update older test cases for latest patch.

2013-11-24 03:37:56 +00:00

const6a.ll

Adjust offsets for max load instruction offsets. This is more pessimistic

2014-01-16 00:47:46 +00:00

const-mult.ll

[mips] Make mips64 the default CPU for the mips64 architecture

2014-02-20 13:13:33 +00:00

constantfp0.ll

…

cprestore.ll

…

ctlz.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

DbgValueOtherTargets.test

Remove unnecessary leading comment characters in lit-only file

2013-03-18 22:08:16 +00:00

disable-tail-merge.ll

[mips] Test case for r192124.

2013-10-07 21:32:57 +00:00

div_rem.ll

Div, Rem int/unsigned int

2012-10-12 02:01:09 +00:00

div.ll

Div, Rem int/unsigned int

2012-10-12 02:01:09 +00:00

divrem.ll

[mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64.

2014-06-12 10:44:10 +00:00

divu_remu.ll

Div, Rem int/unsigned int

2012-10-12 02:01:09 +00:00

divu.ll

Div, Rem int/unsigned int

2012-10-12 02:01:09 +00:00

double2int.ll

…

dsp-patterns-cmp-vselect.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

dsp-patterns.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

dsp-r1.ll

[mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6

2014-06-12 10:54:16 +00:00

dsp-r2.ll

MIPS DSP: add operands to make sure instruction strings are being matched.

2012-09-28 21:23:16 +00:00

dsp-vec-load-store.ll

[mips] Expand vector truncating stores and extending loads.

2013-08-02 19:23:33 +00:00

eh-dwarf-cfa.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

eh-return32.ll

[mips] Small update to the implementation of eh.return for Mips.

2013-04-02 23:02:07 +00:00

eh-return64.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

eh.ll

TBAA: remove !tbaa from testing cases if not used.

2013-04-30 17:52:57 +00:00

ehframe-indirect.ll

Fix MIPS exception personality encoding.

2014-05-30 16:48:56 +00:00

elf_eflags.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

emit-big-cst.ll

Teach AsmPrinter how to print odd constants.

2013-06-07 18:36:03 +00:00

ex2.ll

Last change for mips16 prolog/epilog cleanup and optimization.

2013-12-15 20:49:30 +00:00

extins.ll

[mips] Do not generate INS/EXT nodes if target does not have support for

2013-10-09 23:36:17 +00:00

f16abs.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

fabs.ll

Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math

2014-04-09 09:56:43 +00:00

fastcc.ll

[mips] Forbid the use of registers t6, t7 and t8 if the target is NaCl.

2014-02-07 17:16:40 +00:00

fcmp.ll

[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6

2014-06-12 13:39:06 +00:00

fcopysign-f32-f64.ll

[mips] Fix fcopysign for MIPS-IV and add the test.

2014-04-14 16:24:12 +00:00

fcopysign.ll

[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64

2014-06-12 11:55:58 +00:00

fixdfsf.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

fmadd1.ll

[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64

2014-06-12 11:55:58 +00:00

fneg.ll

Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math

2014-04-09 09:56:43 +00:00

fp16instrinsmc.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

fp16mix.ll

Last change for mips16 prolog/epilog cleanup and optimization.

2013-12-15 20:49:30 +00:00

fp16static.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

fp-indexed-ls.ll

[mips] Add NaCl target and forbid indexed loads and stores for it

2014-02-05 17:19:30 +00:00

fp-spill-reload.ll

…

fpbr.ll

…

fpneeded.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

fpnotneeded.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

fptr2.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

frame-address.ll

Add more addFrameMove test coverage.

2013-05-16 14:51:26 +00:00

frem.ll

…

global-address.ll

[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.

2014-02-20 14:58:19 +00:00

global-pointer-reg.ll

…

gpreg-lazy-binding.ll

[mips] Print move instructions.

2013-03-04 22:25:01 +00:00

gprestore.ll

…

helloworld.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

hf1_body.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

hf16_1.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

hf16call32_body.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

hf16call32.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

hfptrcall.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

i32k.ll

Check in conditional branches for constant islands. Still need to finish

2013-11-28 00:56:37 +00:00

i64arg.ll

[mips] Make sure there is a chain edge dependency between loads that read

2013-11-09 02:38:51 +00:00

imm.ll

…

indirectcall.ll

…

init-array.ll

Fix UseInitArray option for MIPS target.

2012-09-05 06:17:17 +00:00

inlineasm64.ll

…

inlineasm_constraint.ll

[mips] Change lwl and lwr in inlineasm_constraint.ll to lw

2014-05-22 11:51:06 +00:00

inlineasm-cnstrnt-bad-I-1.ll

[mips] Use addiu in inline assembly tests since addi is not available in all ISA's

2014-05-22 11:46:58 +00:00

inlineasm-cnstrnt-bad-J.ll

[mips] Use addiu in inline assembly tests since addi is not available in all ISA's

2014-05-22 11:46:58 +00:00

inlineasm-cnstrnt-bad-K.ll

…

inlineasm-cnstrnt-bad-L.ll

[mips] Use addiu in inline assembly tests since addi is not available in all ISA's

2014-05-22 11:46:58 +00:00

inlineasm-cnstrnt-bad-N.ll

[mips] Use addiu in inline assembly tests since addi is not available in all ISA's

2014-05-22 11:46:58 +00:00

inlineasm-cnstrnt-bad-O.ll

[mips] Use addiu in inline assembly tests since addi is not available in all ISA's

2014-05-22 11:46:58 +00:00

inlineasm-cnstrnt-bad-P.ll

[mips] Use addiu in inline assembly tests since addi is not available in all ISA's

2014-05-22 11:46:58 +00:00

inlineasm-cnstrnt-reg64.ll

[mips] Use addiu in inline assembly tests since addi is not available in all ISA's

2014-05-22 11:46:58 +00:00

inlineasm-cnstrnt-reg.ll

[mips][mips64r6] Improve tests affected by the changes to multiplies and divides

2014-06-11 15:48:00 +00:00

inlineasm-operand-code.ll

[mips] Use addiu in inline assembly tests since addi is not available in all ISA's

2014-05-22 11:46:58 +00:00

inlineasmmemop.ll

Mips specific inline asm memory operand modifier test case

2013-04-11 19:39:19 +00:00

int-to-float-conversion.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

internalfunc.ll

…

jtstat.ll

Test case hygiene.

2013-03-09 18:25:40 +00:00

l3mc.ll

This patch has two main functions:

2014-02-14 19:16:39 +00:00

largeimm1.ll

[mips] Use register number instead of name to print register $AT.

2012-11-02 21:26:03 +00:00

largeimmprinting.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

lazy-binding.ll

[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out

2013-09-28 00:12:32 +00:00

lb1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

lbu1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

lcb2.ll

Check in conditional branches for constant islands. Still need to finish

2013-11-28 00:56:37 +00:00

lcb3c.ll

Part 1 of 3 patches that completes very long conditional branches

2013-11-29 22:32:56 +00:00

lcb4a.ll

final patch for very long conditional branches for mips16 constant islands.

2013-12-03 23:42:51 +00:00

lcb5.ll

final patch for very long conditional branches for mips16 constant islands.

2013-12-03 23:42:51 +00:00

lh1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

lhu1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

lit.local.cfg

Reduce verbiage of lit.local.cfg files

2014-06-09 22:42:55 +00:00

llcarry.ll

Implement carry for subtract/add for mips16

2012-10-26 04:46:26 +00:00

load-store-left-right.ll

[mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6

2014-05-23 13:18:02 +00:00

longbranch.ll

[mips] Modify long branch for NaCl:

2014-06-05 13:52:08 +00:00

machineverifier.ll

…

madd-msub.ll

[mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6

2014-06-12 10:54:16 +00:00

mature-mc-support.ll

Re-commit: Demote EmitRawText call in AsmPrinter::EmitInlineAsm() and remove hasRawTextSupport() call

2014-02-13 14:44:26 +00:00

mbrsize4a.ll

Add, to constant islands, long jumps similar to ARM far branch.

2013-11-21 05:13:23 +00:00

memcpy.ll

…

micromips-atomic.ll

Fixed operand of SC microMIPS instruction.

2014-02-28 18:22:56 +00:00

micromips-directives.ll

[mips] Emit '.set nomicromips' before a function's entry label

2014-04-16 11:46:59 +00:00

micromips-jal.ll

Fixed issue with microMIPS JAL instruction.

2014-03-31 14:00:10 +00:00

micromips-load-effective-address.ll

Test case micromips-load-effective-address.s renamed to micromips-load-effective-address.ll and moved to test/CodeGen/Mips.

2014-01-14 16:26:47 +00:00

mips16_32_1.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_32_3.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_32_4.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_32_5.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_32_6.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_32_7.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_32_8.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_32_9.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_32_10.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

mips16_fpret.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

mips16-hf-attr.ll

[Mips] Does not take in account 'use-soft-float' attribute's value when

2013-12-25 17:00:27 +00:00

mips16ex.ll

This patch is needed to make c++ exceptions work for mips16.

2012-12-16 04:00:45 +00:00

mips16fpe.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

mips64-f128-call.ll

[mips] Add a line which checks function name. Rename file.

2013-03-06 01:58:03 +00:00

mips64-f128.ll

[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6

2014-06-12 13:39:06 +00:00

mips64-fp-indexed-ls.ll

…

mips64-libcall.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

mips64-sret.ll

Allow sret on the second parameter as well as the first

2014-05-09 22:32:13 +00:00

mips64countleading.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

mips64directive.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

mips64ext.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

mips64extins.ll

…

mips64fpimm0.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

mips64fpldst.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

mips64imm.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

mips64instrs.ll

[mips][mips64r6] Improve tests affected by the changes to multiplies and divides

2014-06-11 15:48:00 +00:00

mips64intldst.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

mips64lea.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

mips64muldiv.ll

[mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64.

2014-06-12 10:44:10 +00:00

mips64shift.ll

…

mipslopat.ll

…

misha.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

mno-ldc1-sdc1.ll

[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64

2014-06-12 11:55:58 +00:00

mul.ll

Patch for integer multiply, signed/unsigned, long/long long.

2012-10-05 18:27:54 +00:00

mulll.ll

Patch for integer multiply, signed/unsigned, long/long long.

2012-10-05 18:27:54 +00:00

mulull.ll

Patch for integer multiply, signed/unsigned, long/long long.

2012-10-05 18:27:54 +00:00

nacl-align.ll

Moved test file from test/MC/Mips to test/CodeGen/Mips.

2014-03-07 22:08:46 +00:00

nacl-branch-delay.ll

[mips] Implement NaCl sandboxing of loads, stores and SP changes:

2014-03-10 20:34:23 +00:00

nacl-reserved-regs.ll

[mips] Forbid the use of registers t6, t7 and t8 if the target is NaCl.

2014-02-07 17:16:40 +00:00

neg1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

nomips16.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

not1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

null.ll

Fix a low hanging use of hasRawTextSupport.

2014-01-14 18:57:12 +00:00

o32_cc_byval.ll

[mips] Set instruction itineraries of loads, stores and conditional moves.

2013-09-06 23:28:24 +00:00

o32_cc_vararg.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

o32_cc.ll

[mips] Fix a bug in function CC_MipsO32_FP64. The second double precision

2013-11-12 22:16:18 +00:00

octeon_popcnt.ll

[MIPS] Add cpu octeon and some instructions

2014-03-20 11:51:58 +00:00

octeon.ll

[mips] Add more Octeon cnMips instructions

2014-04-02 18:40:43 +00:00

optimize-fp-math.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

optimize-pic-o0.ll

Fix regression with -O0 for mips .

2014-03-10 16:31:25 +00:00

or1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

powif64_16.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

prevent-hoisting.ll

Prevent hoisting the instruction whose def might be clobbered by the terminator.

2014-06-05 13:42:48 +00:00

private.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

ra-allocatable.ll

TBAA: remove !tbaa from testing cases when they are not needed.

2013-08-21 22:20:53 +00:00

rdhwr-directives.ll

…

rem.ll

Div, Rem int/unsigned int

2012-10-12 02:01:09 +00:00

remat-immed-load.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

remu.ll

Div, Rem int/unsigned int

2012-10-12 02:01:09 +00:00

return_address.ll

[mips] Print move instructions.

2013-03-04 22:25:01 +00:00

return-vector.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

rotate.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

s2rem.ll

Last change for mips16 prolog/epilog cleanup and optimization.

2013-12-15 20:49:30 +00:00

sb1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

sel1c.ll

[mips] Small code generation improvement for conditional operator (select)

2013-12-05 12:07:05 +00:00

sel2c.ll

[mips] Small code generation improvement for conditional operator (select)

2013-12-05 12:07:05 +00:00

select.ll

[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6

2014-06-12 13:39:06 +00:00

selectcc.ll

[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6

2014-06-12 13:39:06 +00:00

seleq.ll

Beginning of expanding all current mips16 macro/pseudo instruction sequences.

2013-02-18 00:59:04 +00:00

seleqk.ll

Expand pseudos BteqzT8CmpiX16 and BtnezT8CmpiX16.

2013-02-19 00:20:58 +00:00

selgek.ll

Expand mips16 SelT form pseudso/macros.

2013-02-22 05:10:51 +00:00

selgt.ll

Expand pseudo/macro BteqzT8SltX16.

2013-02-18 04:04:26 +00:00

selle.ll

Expand macro/pseudo instructions BtnezT8SltX16 and BtnezT8SltuX16.

2013-02-18 05:43:03 +00:00

selltk.ll

Expand mips16 SelT form pseudso/macros.

2013-02-22 05:10:51 +00:00

selne.ll

Expand mips16 SelT form pseudso/macros.

2013-02-22 05:10:51 +00:00

selnek.ll

Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion.

2013-07-13 20:38:47 +00:00

selpat.ll

Expand pseudos/macros for Selt. This is the last of the complex

2013-02-23 03:09:56 +00:00

selTBteqzCmpi.ll

Expand mips16 SelT form pseudso/macros.

2013-02-22 05:10:51 +00:00

selTBtnezCmpi.ll

Expand mips16 SelT form pseudso/macros.

2013-02-22 05:10:51 +00:00

selTBtnezSlti.ll

Expand mips16 SelT form pseudso/macros.

2013-02-22 05:10:51 +00:00

setcc-se.ll

[mips] Print instructions "beq", "bne" and "or" using assembler pseudo

2013-07-26 18:34:25 +00:00

seteq.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

seteqz.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setge.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setgek.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setle.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setlt.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setltk.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setne.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setuge.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setugt.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setule.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setult.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

setultk.ll

Expand pseudos/macros:

2013-02-20 05:45:15 +00:00

sh1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

shift-parts.ll

…

simplebr.ll

Change the default branch instruction to be the 16 bit variety for mips16.

2013-11-12 02:27:12 +00:00

sint-fp-store_pattern.ll

[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point

2014-04-14 16:00:28 +00:00

sitofp-selectcc-opt.ll

…

sll1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

sll2.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

small-section-reserve-gp.ll

In MipsDAGToDAGISel::SelectAddr, fold add node into address operand, if its

2012-08-24 20:21:49 +00:00

spill-copy-acreg.ll

[mips] Handle reading, writing or copying of ccond field of DSP control

2013-05-02 23:07:05 +00:00

sr1.ll

Last change for mips16 prolog/epilog cleanup and optimization.

2013-12-15 20:49:30 +00:00

sra1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

sra2.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

srl1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

srl2.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

stack-alignment.ll

[mips] Partially revert r193641. Stack alignment should not be determined by

2013-11-11 21:49:03 +00:00

stackcoloring.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

stacksize.ll

…

start-asm-file.ll

[mips] Add initial support for NaN2008 in the back-end.

2014-04-16 15:48:55 +00:00

stchar.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

stldst.ll

checking test case for r164811. was an omission to not check this in. this was already approved

2012-10-01 21:35:06 +00:00

sub1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

sub2.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

swzero.ll

Don't modify MO while use_iterator is still pointing to it.

2012-08-09 22:08:24 +00:00

tail16.ll

Fix a problem with mips16 stubs when calls are transformed during

2013-12-18 23:57:48 +00:00

tailcall.ll

[mips] Make sure there is a chain edge dependency between loads that read

2013-11-09 02:38:51 +00:00

tls16_2.ll

Implement MipsHi for mips16

2012-10-27 00:57:14 +00:00

tls16.ll

implement mips16 tls global addr

2012-10-26 22:57:32 +00:00

tls-alias.ll

[pr19844] Add thread local mode to aliases.

2014-05-28 18:15:43 +00:00

tls-models.ll

Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.

2013-07-14 06:24:09 +00:00

tls.ll

Add extra CHECK prefix to tests with explicit prefix

2014-02-16 13:28:15 +00:00

tnaked.ll

Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.

2013-08-22 21:28:54 +00:00

trap1.ll

[Mips] Adjust float ABI settings in case of MIPS16 mode.

2013-11-19 12:20:17 +00:00

trap.ll

[mips] Implement llvm.trap intrinsic.

2013-07-26 20:58:55 +00:00

uitofp.ll

Fix bug 13532.

2012-08-28 02:12:42 +00:00

ul1.ll

Handled unaligned load/stores properly in Mips16

2012-09-15 01:02:03 +00:00

unalignedload.ll

[mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6

2014-05-23 13:18:02 +00:00

vector-load-store.ll

MIPS DSP: add vector load/store patterns.

2012-09-27 01:50:59 +00:00

vector-setcc.ll

[mips] MipsTargetLowering::getSetCCResultType should return a vector type if

2013-01-04 20:06:01 +00:00

weak.ll

…

xor1.ll

1. Redo mips16 instructions to avoid multiple opcodes for same instruction.

2012-08-03 22:57:02 +00:00

zeroreg.ll

[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6

2014-06-12 13:39:06 +00:00