Post-RA LICM keeps three sets of registers: PhysRegDefs, PhysRegClobbers
and TermRegs. When it sees a definition of R it adds all aliases of R
to the corresponding set, so that when it needs to test for membership
it only needs to test a single register, rather than worrying about
aliases there too. E.g. the final candidate loop just has:
unsigned Def = Candidates[i].Def;
if (!PhysRegClobbers.test(Def) && ...) {
to test whether register Def is multiply defined.
However, there was also a shortcut in ProcessMI to make sure we didn't
add candidates if we already knew that they would fail the final test.
This shortcut was more pessimistic than the final one because it
checked whether _any alias_ of the defined register was multiply defined.
This is too conservative for targets that define register pairs.
E.g. on z, R0 and R1 are sometimes used as a pair, so there is a
128-bit register that aliases both R0 and R1. If a loop used
R0 and R1 independently, and the definition of R0 came first,
we would be able to hoist the R0 assignment (because that used
the final test quoted above) but not the R1 assignment (because
that meant we had two definitions of the paired R0/R1 register
and would fail the shortcut in ProcessMI).
This patch just uses the same check for the ProcessMI shortcut as
we use in the final candidate loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188774 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we used a const-pool load for virtually all 64-bit floating values.
Actually, we can get quite a few common values (including 0.0, 1.0) via "vmov"
instructions of one stripe or another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188773 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a llvm.copysign intrinsic; We already have Libfunc recognition for
copysign (which is turned into the FCOPYSIGN SDAG node). In order to
autovectorize calls to copysign in the loop vectorizer, we need a corresponding
intrinsic as well.
In addition to the expected changes to the language reference, the loop
vectorizer, BasicTTI, and the SDAG builder (the intrinsic is transformed into
an FCOPYSIGN node, just like the function call), this also adds FCOPYSIGN to a
few lists in LegalizeVector{Ops,Types} so that vector copysigns can be
expanded.
In TargetLoweringBase::initActions, I've made the default action for FCOPYSIGN
be Expand for vector types. This seems correct for all in-tree targets, and I
think is the right thing to do because, previously, there was no way to generate
vector-values FCOPYSIGN nodes (and most targets don't specify an action for
vector-typed FCOPYSIGN).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188728 91177308-0d34-0410-b5e6-96231b3b80d8
copysign/copysignf never become function calls (because the SDAG expansion code
does not lower to the corresponding function call, but rather directly
implements the associated logic), but copysignl almost always is lowered into a
call to the requested libm functon (and, thus, might clobber CTR).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188727 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix it calculating the wrong value. The struct index
is not a ConstantInt, so it was being interpreted as an array
index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188713 91177308-0d34-0410-b5e6-96231b3b80d8
Until gdb supports the new accelerator tables we should add the
pubnames section so that gdb_index can be generated from gold
at link time. On darwin we already emit the accelerator tables
and so don't need to worry about pubnames.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188708 91177308-0d34-0410-b5e6-96231b3b80d8
- split WidenVecRes_Binary into WidenVecRes_Binary and WidenVecRes_BinaryCanTrap
- WidenVecRes_BinaryCanTrap preserves the original behaviour for operations
that can trap
- WidenVecRes_Binary simply widens the operation and improves codegen for
3-element vectors by allowing widening and promotion on x86 (matches the
behaviour of unary and ternary operation widening)
- use WidenVecRes_Binary for operations on integers.
Reviewed by: nrotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188699 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2 add immediate is in fact defined for SP. The manual is misleading as it points to a different section for add immediate with SP, however the encoding is the same as for add immediate with register only with the SP operand hard coded. As such add immediate with SP and add immediate with register can safely be treated as the same instruction.
All the patch does is adjust a register constraint on an instruction alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188676 91177308-0d34-0410-b5e6-96231b3b80d8
For now this matches the equivalent of (neg (abs ...)), which did hit a few
times in projects/test-suite. We should probably also match cases where
absolute-like selects are used with reversed arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188671 91177308-0d34-0410-b5e6-96231b3b80d8
This first cut is pretty conservative. The final argument register (R6)
is call-saved, so we would need to make sure that the R6 argument to a
sibling call is the same as the R6 argument to the calling function,
which seems worth keeping as a separate patch.
Saying that integer truncations are free means that we no longer
use the extending instructions LGF and LLGF for spills in int-conv-09.ll
and int-conv-10.ll. Instead we treat the registers as 64 bits wide and
truncate them to 32-bits where necessary. I think it's unlikely we'd
use LGF and LLGF for spills in other situations for the same reason,
so I'm removing the tests rather than replacing them. The associated
code is generic and applies to many more instructions than just
LGF and LLGF, so there is no corresponding code removal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188669 91177308-0d34-0410-b5e6-96231b3b80d8
We had previously been asserting when faced with a FCOPYSIGN f64, ppcf128 node
because there was no way to expand the FCOPYSIGN node. Because ppcf128 is the
sum of two doubles, and the first double must have the larger magnitude, we
can take the sign from the first double. As a result, in addition to fixing the
crash, this is also an optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188655 91177308-0d34-0410-b5e6-96231b3b80d8
Modern PPC cores support a floating-point copysign instruction, and we can use
this to lower the FCOPYSIGN node (which is created from calls to the libm
copysign function). A couple of extra patterns are necessary because the
operand types of FCOPYSIGN need not agree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188653 91177308-0d34-0410-b5e6-96231b3b80d8
This reduces the noise in diffs making it more likely that, at least for
LLVM revision-over-revision, diffs will actually yield usable results.
This is consistent with objdump's DWARF dumping behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188650 91177308-0d34-0410-b5e6-96231b3b80d8
We check this in many/all other cases, just missed this one it seems.
Perhaps it'd be worth unifying this so we never emit zero-length
DW_AT_names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188649 91177308-0d34-0410-b5e6-96231b3b80d8
When patching inlineasm nodes to use GPRPair for 64-bit values, we
were dropping the information that two operands were tied, which
effectively broke the live-interval of vregs affected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188643 91177308-0d34-0410-b5e6-96231b3b80d8
Properly constrain the operand register class for instructions used
in [sz]ext expansion. Update more tests to use the verifier now that
we're getting the register classes correct.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188594 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the generic instruction selection helper functions to constrain
the register classes of their input operands. For non-physical register
references, the generic code needs to be careful not to mess that up
when replacing references to result registers. As the comment indicates
for MachineRegisterInfo::replaceRegWith(), it's important to call
constrainRegClass() first.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188593 91177308-0d34-0410-b5e6-96231b3b80d8
Lots of machine verifier errors result from using a plain GPR regclass
for incoming argument copies. A more restrictive rGPR class is more
appropriate since it more accurately represents what's happening, plus
it lines up better with isel later on so the verifier is happier.
Reduces the number of ARM fast-isel tests not running with the verifier
enabled by over half.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188592 91177308-0d34-0410-b5e6-96231b3b80d8
This regards how mips16 is viewed. It's not really a target type but
there has always been a target for it in the td files. It's more properly
-mcpu=mips32 -mattr=+mips16 . This is how clang treats it but we have
always had the -mcpu=mips16 which I probably should delete now but it will
require updating all the .ll test cases for mips16. In this case it changed
how we decide if we have a count bits instruction and whether instruction
lowering should then expand ctlz. Now that we have dual mode compilation,
-mattr=+mips16 really just indicates the inital processor mode that
we are compiling for. (It is also possible to have -mcpu=64 -mattr=+mips16
but as far as I know, nobody has even built such a processor, though there
is an architecture manual for this).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188586 91177308-0d34-0410-b5e6-96231b3b80d8
The logic in SIInsertWaits::getHwCounts() only really made sense for SMRD
instructions, and trying to shoehorn it into handling DS_WRITE_B32 caused
it to corrupt the encoding of that by clobbering the first operand with
the second one.
Undo that damage and only apply the SMRD logic to that.
Fixes some derivates related piglit regressions with radeonsi.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188558 91177308-0d34-0410-b5e6-96231b3b80d8
This unbreaks PIC with fast isel on ELF targets (PR16717). The output matches
what GCC and SDag do for PIC but may not cover all of the many flavors of PIC
that exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188551 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb2 literal loads use an offset encoding which allows for
negative zero. This fixes parsing and encoding so that #-0
is correctly processed. The parser represents #-0 as INT32_MIN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188549 91177308-0d34-0410-b5e6-96231b3b80d8
There are many Thumb instructions which take 12-bit immediates encoded in a special
8-byte value + 4-byte rotator form. Not all numbers are represented, and it's legal
to transform an assembly instruction to be able to encode the immediate.
For example: AND and BIC are complementary instructions; one can switch the AND
to a BIC as long as the immediate is complemented.
The intent is to switch one instruction into its complementary one when the immediate
cannot be encoded in the form requested in the original assembly and when the
complementary immediate is encodable.
The patch addresses two issues:
1. definition of t2SOImmNot immediate - it has to check that the orignal value is
not encoded naturally
2. t2AND and t2BIC instruction aliases which should use the Thumb2 SOImm operand
rather than the ARM one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188548 91177308-0d34-0410-b5e6-96231b3b80d8
Generalize r188163 to cope with return types other than MVT::i32, just
as the existing visitMemCmpCall code did. I've split this out into a
subroutine so that it can be used for other upcoming patches.
I also noticed that I'd used the wrong API to record the out chain.
It's a load that uses DAG.getRoot() rather than getRoot(), so the out
chain should go on PendingLoads. I don't have a testcase for that because
we don't do any interesting scheduling on z yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188540 91177308-0d34-0410-b5e6-96231b3b80d8
r188163 used CLC to implement memcmp. Code that compares the result
directly against zero can test the CC value produced by CLC, but code
that needs an integer result must use IPM. The sequence I'd used was:
ipm <reg>
sll <reg>, 2
sra <reg>, 30
but I'd forgotten that this inverts the order, so that CC==1 ("less")
becomes an integer greater than zero, and CC==2 ("greater") becomes
an integer less than zero. This sequence should only be used if the
CLC arguments are reversed to compensate. The problem then is that
the branch condition must also be reversed when testing the CLC
result directly.
Rather than do that, I went for a different sequence that works with
the natural CLC order:
ipm <reg>
srl <reg>, 28
rll <reg>, <reg>, 31
One advantage of this is that it doesn't clobber CC. A disadvantage
is that any sign extension to 64 bits must be done separately,
rather than being folded into the shifts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188538 91177308-0d34-0410-b5e6-96231b3b80d8
