This function consists of following steps:
1. Collect dependent memory accesses.
2. Analyze availability.
3. Perform fully redundancy elimination, or
4. Perform PRE, depending on the availability
Step 2, 3 and 4 are now moved to three helper routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181047 91177308-0d34-0410-b5e6-96231b3b80d8
its fields.
This removes false dependencies between DSP instructions which access different
fields of the the control register. Implicit register operands are added to
instructions RDDSP and WRDSP after instruction selection, depending on the
value of the mask operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181041 91177308-0d34-0410-b5e6-96231b3b80d8
By supporting the vectorization of PHINodes with more than two incoming values we can increase the complexity of nested if statements.
We can now vectorize this loop:
int foo(int *A, int *B, int n) {
for (int i=0; i < n; i++) {
int x = 9;
if (A[i] > B[i]) {
if (A[i] > 19) {
x = 3;
} else if (B[i] < 4 ) {
x = 4;
} else {
x = 5;
}
}
A[i] = x;
}
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181037 91177308-0d34-0410-b5e6-96231b3b80d8
The soon-to-be-committed SystemZ port uses 128-bit IEEE floats.
MIPS64 GNU/Linux does too (albeit with unusual NaNs).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181016 91177308-0d34-0410-b5e6-96231b3b80d8
Another step towards reinstating the SystemZ backend. I'll commit
the configure changes separately (TARGET_HAS_JIT etc.), then commit
a patch to enable the MCJIT tests on SystemZ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181015 91177308-0d34-0410-b5e6-96231b3b80d8
The llvm::sys::AddSignalHandler function (as well as related routines) in
lib/Support/Unix/Signals.inc currently registers a signal handler routine
via "sigaction". When this handler is called due to a SIGSEGV, SIGILL or
similar signal, it will show a stack backtrace, deactivate the handler,
and then simply return to the operating system. The intent is that the
OS will now retry execution at the same location as before, which ought
to again trigger the same error condition and cause the same signal to be
delivered again. Since the hander is now deactivated, the OS will take
its default action (usually, terminate the program and possibly create
a core dump).
However, this method doesn't work reliably on System Z: With certain
signals (namely SIGILL, SIGFPE, and SIGTRAP), the program counter stored
by the kernel on the signal stack frame (which is the location where
execution will resume) is not the instruction that triggered the fault,
but then instruction *after it*. When the LLVM signal handler simply
returns to the kernel, execution will then resume at *that* address,
which will not trigger the problem again, but simply go on and execute
potentially unrelated code leading to random errors afterwards.
To fix this, the patch simply goes and re-raises the signal in question
directly from the handler instead of returning from it. This is done
only on System Z and only for those signals that have this particular
problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181010 91177308-0d34-0410-b5e6-96231b3b80d8
Build attribute sections can now be read if they exist via ELFObjectFile, and
the llvm-readobj tool has been extended with an option to dump this information
if requested. Regression tests are also included which exercise these features.
Also update the docs with a fixed ARM ABI link and a new link to the Addenda
which provides the build attributes specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181009 91177308-0d34-0410-b5e6-96231b3b80d8
Another step towards reinstating the SystemZ backend. Tests will be
included in the main backend patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181008 91177308-0d34-0410-b5e6-96231b3b80d8
the "identifier" parsed by the frontend callback by skipping forward
until we've consumed a token that ends at the point dictated by the
callback.
In addition, inform the callback when it's parsing an unevaluated
operand (e.g. mov eax, LENGTH A::x) as opposed to an evaluated one
(e.g. mov eax, [A::x]).
This commit depends on a clang commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180978 91177308-0d34-0410-b5e6-96231b3b80d8
register.
- Define pseudo instructions which store or load ccond field of the DSP
control register.
- Emit the pseudos in MipsSEInstrInfo::storeRegToStack and loadRegFromStack.
- Expand the pseudos before callee-scan save.
- Emit instructions RDDSP or WRDSP to copy between ccond field and GPRs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180969 91177308-0d34-0410-b5e6-96231b3b80d8
Actually it took me couple of hours trying to make sense of them and
only to find they are dead code. I guess the original author used
"allSingleSucc" to indicate if there are any critial edge emanating
from some blocks, and tried to perform code motion (actually speculation)
in the presence of these critical edges; but later on he/she changed mind
and decided to perform edge-splitting first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180951 91177308-0d34-0410-b5e6-96231b3b80d8
* lib/Target/Hexagon/HexagonInstrInfo.td: Add patterns to combine a
sequence of a pair of i32->i64 extensions followed by a "bitwise or"
into COMBINE_rr.
* lib/Target/Hexagon/HexagonPeephole.cpp: Copy propagate Rx in the
instruction Rp = COMBINE_Ir_V4(0, Rx) to the uses of Rp:subreg_loreg.
* test/CodeGen/Hexagon/union-1.ll: New test.
* test/CodeGen/Hexagon/combine_ir.ll: Fix test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180946 91177308-0d34-0410-b5e6-96231b3b80d8
to emitted instructions. Use this if you want an instruction to be
counted towards the prologue or if there is no useful source location.
rdar://problem/13442648
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180929 91177308-0d34-0410-b5e6-96231b3b80d8
* lib/Target/Hexagon/HexagonInstrInfo.cpp (GetDotNewPredOp):
Given a jump opcode return the right pred.new jump opcode with
a taken vs not-taken hint based on branch probabilities provided
by the target independent module.
* lib/Target/Hexagon/HexagonVLIWPacketizer.cpp: Use the above function.
* lib/Target/Hexagon/HexagonNewValueJump.cpp(getNewvalueJumpOpcode):
Enhance existing function use branch probabilities like
HexagonInstrInfo::GetDotNewPredOp but for New Value (GPR) Jumps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180923 91177308-0d34-0410-b5e6-96231b3b80d8
All but two patterns have been converted to the new syntax. The
remaining two patterns will require COPY_TO_REGCLASS instructions, which
the VLIW DAG Scheduler cannot handle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180922 91177308-0d34-0410-b5e6-96231b3b80d8
Fortunately this pattern never matched, otherwise
we would have generated incorrect code.
Signed-off-by: Christian K??nig <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180921 91177308-0d34-0410-b5e6-96231b3b80d8
at all of the operands. Previously it was skipping over implicit operands which
cause infinite looping when the two-address pass try to reschedule a
two-address instruction below the kill of tied operand.
I'm unable to come up with a reasonably sized test case.
rdar://13747577
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180906 91177308-0d34-0410-b5e6-96231b3b80d8
