benchmarks, and that it can be simplified to X/Y. (In general you can only
simplify (Z*Y)/Y to Z if the multiplication did not overflow; if Z has the
form "X/Y" then this is the case). This patch implements that transform and
moves some Div logic out of instcombine and into InstructionSimplify.
Unfortunately instcombine gets in the way somewhat, since it likes to change
(X/Y)*Y into X-(X rem Y), so I had to teach instcombine about this too.
Finally, thanks to the NSW/NUW flags, sometimes we know directly that "Z*Y"
does not overflow, because the flag says so, so I added that logic too. This
eliminates a bunch of divisions and subtractions in 447.dealII, and has good
effects on some other benchmarks too. It seems to have quite an effect on
tramp3d-v4 but it's hard to say if it's good or bad because inlining decisions
changed, resulting in massive changes all over.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124487 91177308-0d34-0410-b5e6-96231b3b80d8
doesn't return immediately after then the insert position in UniqueSCEVs will
be out of date. No test because this is a memory corruption issue. Fixes PR9051!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124282 91177308-0d34-0410-b5e6-96231b3b80d8
a few loops accordingly. Should be no functional change.
This is a step for more accurate cost/benefit analysis of devirt/inlining
bonuses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124275 91177308-0d34-0410-b5e6-96231b3b80d8
optimized code are:
(non-negative number)+(power-of-two) != 0 -> true
and
(x | 1) != 0 -> true
Instcombine knows about the second one of course, but only does it if X|1
has only one use. These fire thousands of times in the testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124183 91177308-0d34-0410-b5e6-96231b3b80d8
with BasicAA's DecomposeGEPExpression, which recently began
using a TargetData. This fixes PR8968, though the testcase
is awkward to reduce.
Also, update several off GetUnderlyingObject's users
which happen to have a TargetData handy to pass it in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124134 91177308-0d34-0410-b5e6-96231b3b80d8
clang's -Wuninitialized-experimental warning.
While these don't look like real bugs, clang's
-Wuninitialized-experimental analysis is stricter
than GCC's, and these fixes have the benefit
of being general nice cleanups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124073 91177308-0d34-0410-b5e6-96231b3b80d8
auto-simplier the transform most missed by early-cse is (zext X) != 0 -> X != 0.
This patch adds this transform and some related logic to InstructionSimplify
and removes some of the logic from instcombine (unfortunately not all because
there are several situations in which instcombine can improve things by making
new instructions, whereas instsimplify is not allowed to do this). At -O2 this
often results in more than 15% more simplifications by early-cse, and results in
hundreds of lines of bitcode being eliminated from the testsuite. I did see some
small negative effects in the testsuite, for example a few additional instructions
in three programs. One program, 483.xalancbmk, got an additional 35 instructions,
which seems to be due to a function getting an additional instruction and then
being inlined all over the place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123911 91177308-0d34-0410-b5e6-96231b3b80d8
by indvars through the scev expander.
trunc(add x, y) --> add(trunc x, y). Currently SCEV largely folds the other way
which is probably wrong, but preserved to minimize churn. Instcombine doesn't
do this fold either, demonstrating a missed optz'n opportunity on code doing
add+trunc+add.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123838 91177308-0d34-0410-b5e6-96231b3b80d8
are pointing to the same object, one pointer is accessing the entire
object, and the other is access has a non-zero size. This prevents
TBAA from kicking in and saying NoAlias in such cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123775 91177308-0d34-0410-b5e6-96231b3b80d8
These were not recommended by my auto-simplifier since they don't fire often enough.
However they do fire from time to time, for example they remove one subtraction from
the final bitcode for 483.xalancbmk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123755 91177308-0d34-0410-b5e6-96231b3b80d8
simplification in fully optimized code. It occurs sporadically in the testsuite, and
many times in 403.gcc: the final bitcode has 131 fewer subtractions after this change.
The reason that the multiplies are not eliminated is the same reason that instcombine
did not catch this: they are used by other instructions (instcombine catches this with
a more general transform which in general is only profitable if the operands have only
one use).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123754 91177308-0d34-0410-b5e6-96231b3b80d8
half a million non-local queries, each of which would otherwise have triggered a
linear scan over a basic block.
Also fix a fixme for memory intrinsics which dereference pointers. With this,
we prove that a pointer is non-null because it was dereferenced by an intrinsic
112 times in llvm-test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123533 91177308-0d34-0410-b5e6-96231b3b80d8
simplification present in fully optimized code (I think instcombine fails to
transform some of these when "X-Y" has more than one use). Fires here and
there all over the test-suite, for example it eliminates 8 subtractions in
the final IR for 445.gobmk, 2 subs in 447.dealII, 2 in paq8p etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123442 91177308-0d34-0410-b5e6-96231b3b80d8
threading of shifts over selects and phis while there. This fires here and
there in the testsuite, to not much effect. For example when compiling spirit
it fires 5 times, during early-cse, resulting in 6 more cse simplifications,
and 3 more terminators being folded by jump threading, but the final bitcode
doesn't change in any interesting way: other optimizations would have caught
the opportunity anyway, only later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123441 91177308-0d34-0410-b5e6-96231b3b80d8
While there, I noticed that the transform "undef >>a X -> undef" was wrong.
For example if X is 2 then the top two bits must be equal, so the result can
not be anything. I fixed this in the constant folder as well. Also, I made
the transform for "X << undef" stronger: it now folds to undef always, even
though X might be zero. This is in accordance with the LangRef, but I must
admit that it is fairly aggressive. Also, I added "i32 X << 32 -> undef"
following the LangRef and the constant folder, likewise fairly aggressive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123417 91177308-0d34-0410-b5e6-96231b3b80d8
Add methods for accessing the (single) entry / exit edge of a region. If no such
edge exists, null is returned. Both accessors return the start block of the
corresponding edge. The edge can finally be formed by utilizing
Region::getEntry() or Region::getExit();
Contributed by: Andreas Simbuerger <simbuerg@fim.uni-passau.de>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123410 91177308-0d34-0410-b5e6-96231b3b80d8
is "X != 0 -> X" when X is a boolean. This occurs a lot because of the way
llvm-gcc converts gcc's conditional expressions. Add this, and a few other
similar transforms for completeness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123372 91177308-0d34-0410-b5e6-96231b3b80d8
point values to their integer representation through the SSE intrinsic
calls. This is the last part of a README.txt entry for which I have real
world examples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123206 91177308-0d34-0410-b5e6-96231b3b80d8
a + {b,+,stride} into {a+b,+,stride} (because a is LIV),
then the resultant AddRec is NUW/NSW if the client says it
is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123133 91177308-0d34-0410-b5e6-96231b3b80d8
void f(int* begin, int* end) { std::fill(begin, end, 0); }
which turns into a != exit expression where one pointer is
strided and (thanks to step #1) known to not overflow, and
the other is loop invariant.
The observation here is that, though the IV is strided by
4 in this case, that the IV *has* to become equal to the
end value. It cannot "miss" the end value by stepping over
it, because if it did, the strided IV expression would
eventually wrap around.
Handle this by turning A != B into "A-B != 0" where the A-B
part is known to be NUW.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123131 91177308-0d34-0410-b5e6-96231b3b80d8
ret i64 ptrtoint (i8* getelementptr ([1000 x i8]* @X, i64 1, i64 sub (i64 0, i64 ptrtoint ([1000 x i8]* @X to i64))) to i64)
to "ret i64 1000". This allows us to correctly compute the trip count
on a loop in PR8883, which occurs with std::fill on a char array. This
allows us to transform it into a memset with a constant size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122950 91177308-0d34-0410-b5e6-96231b3b80d8
hasBlockValue() that was causing iterator invalidations. Many thanks to Dimitry Andric for
tracking down those invalidations!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122906 91177308-0d34-0410-b5e6-96231b3b80d8
a pointer value has potentially become escaping. Implementations can choose to either fall back to
conservative responses for that value, or may recompute their analysis to accomodate the change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122777 91177308-0d34-0410-b5e6-96231b3b80d8
update a callGraph when performing the common operation of splicing the body to
a new function and updating all callers (such as via RAUW).
No users yet, though this is intended for DeadArgumentElimination as part of
PR8887.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122728 91177308-0d34-0410-b5e6-96231b3b80d8
numbering, in which it considers (for example) "%a = add i32 %x, %y" and
"%b = add i32 %x, %y" to be equal because the operands are equal and the
result of the instructions only depends on the values of the operands.
This has almost no effect (it removes 4 instructions from gcc-as-one-file),
and perhaps slows down compilation: I measured a 0.4% slowdown on the large
gcc-as-one-file testcase, but it wasn't statistically significant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122654 91177308-0d34-0410-b5e6-96231b3b80d8
the original instruction, half the cases were missed (making it not
wrong but suboptimal). Also correct a typo (A <-> B) in the second
chunk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122414 91177308-0d34-0410-b5e6-96231b3b80d8
not assume this (for example in case more transforms get added below
it). Suggested by Frits van Bommel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122332 91177308-0d34-0410-b5e6-96231b3b80d8
quite often, but don't make much difference in practice presumably because
instcombine also knows them and more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122328 91177308-0d34-0410-b5e6-96231b3b80d8
a couple of existing transforms. This fires surprisingly often, for
example when compiling gcc "(X+(-1))+1->X" fires quite a lot as well
as various "and" simplifications (usually with a phi node operand).
Most of the time this doesn't make a real difference since the same
thing would have been done elsewhere anyway, eg: by instcombine, but
there are a few places where this results in simplifications that we
were not doing before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122326 91177308-0d34-0410-b5e6-96231b3b80d8
(they had just been forgotten before). Adding Xor causes "main" in the
existing testcase 2010-11-01-lshr-mask.ll to be hugely more simplified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122245 91177308-0d34-0410-b5e6-96231b3b80d8
While LLVM's main design is that analysis code shouldn't
go out of its way to understand code which hasn't been
InstCombined, analysis utility routines like this can
find themselves being called in the middle of transform
passes when instcombine hasn't had a chance to run.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121886 91177308-0d34-0410-b5e6-96231b3b80d8
* mergeIn now uses constant folding for constants that are provably not-equal.
* sink some sanity checks from the get*() methods into the mark*() methods, to ensure that we never have a constant/notconstant ConstantInt
* some textual cleanups, whitespace changes, removing "else" after return, that sort of thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121877 91177308-0d34-0410-b5e6-96231b3b80d8
it to be replaced by undef rather than not replaced at all, the idea being that
this may reduce the amount of work done by whoever called InstructionSimplify.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121860 91177308-0d34-0410-b5e6-96231b3b80d8
zextOrTrunc(), and APSInt methods extend(), extOrTrunc() and new method
trunc(), to be const and to return a new value instead of modifying the
object in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121120 91177308-0d34-0410-b5e6-96231b3b80d8
contains "ref".
Enhance DSE to use a modref query instead of a store-specific hack
to generalize the "ignore may-alias stores" optimization to handle
memset and memcpy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120368 91177308-0d34-0410-b5e6-96231b3b80d8
uninitialized. The warning is terrible, has incorrect source locations, and has
a huge false positive rate such as *all* of these.
If anyone has a better solution, please let me know. Alternatively, I'll
happily add -Wno-uninitialized to the -Werror build mode. Maybe I can even do
it *only* when building with GCC instead of Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120281 91177308-0d34-0410-b5e6-96231b3b80d8
are constant. There was in fact one exception to this (phi nodes) - so
remove that exception (InstructionSimplify handles this so there should
be no loss).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120015 91177308-0d34-0410-b5e6-96231b3b80d8
folding improvements: if P points to a type of size zero, turn "gep P, N" into "P".
More generally, if a gep index type has size zero, instcombine could replace the
index with zero, but that is not done here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119942 91177308-0d34-0410-b5e6-96231b3b80d8
zero sized elements. This allows us to compile:
#include <string>
void foo() { std::string s; }
into an empty function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119933 91177308-0d34-0410-b5e6-96231b3b80d8
destination location of a memcpy/memmove. I'm not clear about whether
TBAA works on these, so I'm leaving it out for now. Dan, please revisit
this when convenient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119928 91177308-0d34-0410-b5e6-96231b3b80d8
preserves LCSSA form out of ScalarEvolution and into the LoopInfo
class. Use it to check that SimplifyInstruction simplifications
are not breaking LCSSA form. Fixes PR8622.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119727 91177308-0d34-0410-b5e6-96231b3b80d8
Some of these maps may merge in the future, but for now it's convenient to have
a utility function for them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119587 91177308-0d34-0410-b5e6-96231b3b80d8
memoize the results. This improves compile time in code which highly complex
expressions which get queried many times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119584 91177308-0d34-0410-b5e6-96231b3b80d8
needs to be checked that this won't break LCSSA form.
Change the existing checking method to a more direct one:
rather than seeing if all predecessors belong to the loop,
check that the replacing value is either not in any loop or
is in a loop that contains the phi node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119556 91177308-0d34-0410-b5e6-96231b3b80d8
instructions out of InstCombine and into InstructionSimplify. While
there, introduce an m_AllOnes pattern to simplify matching with integers
and vectors with all bits equal to one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119536 91177308-0d34-0410-b5e6-96231b3b80d8
phi node itself if it occurs in an unreachable basic block. Protect
against this. Hopefully this will fix some more buildbots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119493 91177308-0d34-0410-b5e6-96231b3b80d8
simplified to itself (this can only happen in unreachable blocks).
Change it to return null instead. Hopefully this will fix some
buildbot failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119490 91177308-0d34-0410-b5e6-96231b3b80d8
class, uses DominatorTree which is an analysis. This change moves all of
the tricky hasConstantValue logic to SimplifyInstruction, and replaces it
with a very simple literal implementation. I already taught users of
hasConstantValue that need tricky stuff to use SimplifyInstruction instead.
I didn't update InlineFunction because the IR looks like it might be in a
funky state at the point it calls hasConstantValue, which makes calling
SimplifyInstruction dangerous since it can in theory do a lot of tricky
reasoning. This may be a pessimization, for example in the case where
all phi node operands are either undef or a fixed constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119459 91177308-0d34-0410-b5e6-96231b3b80d8
over a phi node by applying it to each operand may be wrong if the
operation and the phi node are mutually interdependent (the testcase
has a simple example of this). So only do this transform if it would
be correct to perform the operation in each predecessor of the block
containing the phi, i.e. if the other operands all dominate the phi.
This should fix the FFMPEG snow.c regression reported by İsmail Dönmez.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119347 91177308-0d34-0410-b5e6-96231b3b80d8
offload the work to hasConstantValue rather than do something more
complicated (such handling mutually recursive phis) because (1) it is
not clear it is worth it; and (2) if it is worth it, maybe such logic
would be better placed in hasConstantValue. Adjust some GVN tests
which are now cleaned up much further (eg: all phi nodes are removed).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119043 91177308-0d34-0410-b5e6-96231b3b80d8
operands are the phi node itself or undef, then return undef.
This logic already existed at a higher level so in practice it
shouldn't make the slightest difference. Note that this code
could be replaced by a call to PN->hasConstantValue(). However
since we bail out the moment we see a non-constant operand, it
is more efficient to have a specialized version of that logic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119041 91177308-0d34-0410-b5e6-96231b3b80d8
references. For example, this allows gvn to eliminate the load in
this example:
void foo(int n, int* p, int *q) {
p[0] = 0;
p[1] = 1;
if (n) {
*q = p[0];
}
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118714 91177308-0d34-0410-b5e6-96231b3b80d8
nodes can be used in loops, this could result in infinite looping
if there is no recursion limit, so add such a limit. It is also
used for the SelectInst case because in theory there could be an
infinite loop there too if the basic block is unreachable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118694 91177308-0d34-0410-b5e6-96231b3b80d8
The simplifications performed here never create new instructions, they
only return existing instructions (or a constant), and so are always a
win. In theory they should transform (for example)
%z = and i32 %x, %y
%s = select i1 %cond, i32 %y, i32 %z
%r = and i32 %x, %s
into
%r = and i32 %x, y
but in practice they get into a fight with instcombine, and lose.
Unfortunately instcombine does a poor job in this case. Nonetheless
I'm committing this transform to make it easier to discuss what to
do to make peace with instcombine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118679 91177308-0d34-0410-b5e6-96231b3b80d8
to optionally look for constant or local (alloca) memory.
Teach BasicAliasAnalysis::pointsToConstantMemory to look through Select
and Phi nodes, and to support looking for local memory.
Remove FunctionAttrs' PointsToLocalOrConstantMemory function, now that
AliasAnalysis knows all the tricks that it knew.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118412 91177308-0d34-0410-b5e6-96231b3b80d8
of a select instruction, see if doing the compare with the
true and false values of the select gives the same result.
If so, that can be used as the value of the comparison.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118378 91177308-0d34-0410-b5e6-96231b3b80d8
To create debugging information for a pointer, using DIBUilder front-end just needs
DBuilder.CreatePointerType(Ty, Size);
instead of
DebugFactory.CreateDerivedType(llvm::dwarf::DW_TAG_pointer_type,
TheCU, "", getOrCreateMainFile(),
0, Size, 0, 0, 0, OCTy);
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118248 91177308-0d34-0410-b5e6-96231b3b80d8
they may have ValuesAtScopes map entries referencing their outer loops.
This fixes a user-after-free reported in PR8471.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117698 91177308-0d34-0410-b5e6-96231b3b80d8
