These instructions aren't used for codegen since the original L*DB instructions
are suitable for fround.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212703 91177308-0d34-0410-b5e6-96231b3b80d8
Immediate fields that have no natural MVT type tended to use i8 if the
field was small enough. This was a bit confusing since i8 isn't a legal
type for the target. Fields for short immediates in a 32-bit or 64-bit
operation use i32 or i64 instead, so it would be better to do the same
for all fields.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212702 91177308-0d34-0410-b5e6-96231b3b80d8
The dwarf FPR numbers are supposed to have the order F0, F2, F4, F6,
F1, F3, F5, F7, F8, etc., which matches the pairing of registers for
long doubles. E.g. a long double stored in F0 is paired with F2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212701 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
On MIPS32r6/MIPS64r6, floating point comparisons return 0 or -1 but integer
comparisons return 0 or 1.
Updated the various uses of getBooleanContents. Two simplifications had to be
disabled when float and int boolean contents differ:
- ScalarizeVecRes_VSELECT except when the kind of boolean contents is trivially
discoverable (i.e. when the condition of the VSELECT is a SETCC node).
- visitVSELECT (select C, 0, 1) -> (xor C, 1).
Come to think of it, this one could test for the common case of 'C'
being a SETCC too.
Preserved existing behaviour for all other targets and updated the affected
MIPS32r6/MIPS64r6 tests. This also fixes the pi benchmark where the 'low'
variable was counting in the wrong direction because it thought it could simply
add the result of the comparison.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D4389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212697 91177308-0d34-0410-b5e6-96231b3b80d8
combine into half-shuffles through unpack instructions that expand the
half to a whole vector without messing with the dword lanes.
This fixes some redundant instructions in splat-like lowerings for
v16i8, which are now getting to be *really* nice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212695 91177308-0d34-0410-b5e6-96231b3b80d8
that splat i8s into i16s.
Previously, we would try much too hard to arrange a sequence of i8s in
one half of the input such that we could unpack them into i16s and
shuffle those into place. This isn't always going to be a cheaper i8
shuffle than our other strategies. The case where it is always going to
be cheaper is when we can arrange all the necessary inputs into one half
using just i16 shuffles. It happens that viewing the problem this way
also makes it much easier to produce an efficient set of shuffles to
move the inputs into one half and then unpack them.
With this, our splat code gets one step closer to being not terrible
with the new experimental lowering strategy. It also exposes two
combines missing which I will add next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212692 91177308-0d34-0410-b5e6-96231b3b80d8
isDereferenceablePointer should not give up upon encountering any bitcast. If
we're casting from a pointer to a larger type to a pointer to a small type, we
can continue by examining the bitcast's operand. This missing capability
was noted in a comment in the function.
In order for this to work, isDereferenceablePointer now takes an optional
DataLayout pointer (essentially all callers already had such a pointer
available). Most code uses isDereferenceablePointer though
isSafeToSpeculativelyExecute (which already took an optional DataLayout
pointer), and to enable the LICM test case, LICM needs to actually provide its DL
pointer to isSafeToSpeculativelyExecute (which it was not doing previously).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212686 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a utility method to access the WinCFI information in bulk and uses
that to iterate rather than requesting the count and individually iterating
them. This is in preparation for restructuring WinCFI handling to enable more
clear sharing across architectures to enable unwind information emission for
Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212683 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles specifically for cases where a small subset of the elements in
the input vector are actually used.
This is specifically targetted at improving the shuffles generated for
trunc operations, but also helps out splat-like operations.
There is still some really low-hanging fruit here that I want to address
but this is a huge step in the right direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212680 91177308-0d34-0410-b5e6-96231b3b80d8
don't need to set it manually.
This is based on feedback from Tom who pointed out that if every target
needs to handle this we need to reach out to those maintainers. In fact,
it doesn't make sense to duplicate everything when anything other than
expand seems unlikely at this stage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212661 91177308-0d34-0410-b5e6-96231b3b80d8
Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson
reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped
provide a reduced reproduction, though the failure wasn't too hard to
guess, and even easier with the example to confirm.
The assertion that the subprogram metadata associated with an
llvm::Function matches the scope data referenced by the DbgLocs on the
instructions in that function is not valid under LTO. In LTO, a C++
inline function might exist in multiple CUs and the subprogram metadata
nodes will refer to the same llvm::Function. In this case, depending on
the order of the CUs, the first intance of the subprogram metadata may
not be the one referenced by the instructions in that function and the
assertion will fail.
A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the
assertion removed and a comment added to explain this situation.
Original commit message:
If a function isn't actually in a CU's subprogram list in the debug info
metadata, ignore all the DebugLocs and don't try to build scopes, track
variables, etc.
While this is possibly a minor optimization, it's also a correctness fix
for an incoming patch that will add assertions to LexicalScopes and the
debug info verifier to ensure that all scope chains lead to debug info
for the current function.
Fix up a few test cases that had broken/incomplete debug info that could
violate this constraint.
Add a test case where this occurs by design (inlining a
debug-info-having function in an attribute nodebug function - we want
this to work because /if/ the nodebug function is then inlined into a
debug-info-having function, it should be fine (and will work fine - we
just stitch the scopes up as usual), but should the inlining not happen
we need to not assert fail either).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212649 91177308-0d34-0410-b5e6-96231b3b80d8
Turn llvm::SpecialCaseList into a simple class that parses text files in
a specified format and knows nothing about LLVM IR. Move this class into
LLVMSupport library. Implement two users of this class:
* DFSanABIList in DFSan instrumentation pass.
* SanitizerBlacklist in Clang CodeGen library.
The latter will be modified to use actual source-level information from frontend
(source file names) instead of unstable LLVM IR things (LLVM Module identifier).
Remove dependency edge from ClangCodeGen/ClangDriver to LLVMTransformUtils.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212643 91177308-0d34-0410-b5e6-96231b3b80d8
It is a good idea, it's slightly clearer and simpler. Unfortunately
the headline news is: we save one line!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212641 91177308-0d34-0410-b5e6-96231b3b80d8
Storing will generally be immediately preceded by rounding from an f32
or f64, so make sure to match those patterns directly to convert into the
FPR16 register class directly rather than going through the integer GPRs.
This also eliminates an extra step in the convert-from-f64 path
which was first converting to f32 and then to f16 from there.
rdar://17594379
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212638 91177308-0d34-0410-b5e6-96231b3b80d8
This lets us experiment with 512-bit vectorization without passing
force-vector-width manually.
The code generated for a simple integer memset loop is properly vectorized.
Disassembly is still broken for it though :(.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212634 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow up to r212492. There should be no functional difference, but
this patch makes it clear that SrcVT must be an i1/i8/16/i32 and DestVT must be
an i8/i16/i32/i64.
rdar://17516686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212633 91177308-0d34-0410-b5e6-96231b3b80d8
In PR20059 ( http://llvm.org/pr20059 ), instcombine eliminates shuffles that are necessary before performing an operation that can trap (srem).
This patch calls isSafeToSpeculativelyExecute() and bails out of the optimization in SimplifyVectorOp() if needed.
Differential Revision: http://reviews.llvm.org/D4424
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212629 91177308-0d34-0410-b5e6-96231b3b80d8
not widening the input type to the node sufficiently to let the ext take
place in a register.
This would in turn result in a mysterious bitcast assertion failure
downstream. First change here is to add back the helpful assert I had in
an earlier version of the code to catch this immediately.
Next change is to add support to the type legalization to detect when we
have widened the operand either too little or too much (for whatever
reason) and find a size-matched legal vector type to convert it to
first. This can also fail so we get a new fallback path, but that seems
OK.
With this, we no longer crash on vec_cast2.ll when using widening. I've
also added the CHECK lines for the zero-extend cases here. We still need
to support sign-extend and trunc (or something) to get plausible code
for the other two thirds of this test which is one of the regression
tests that showed the most scalarization when widening was
force-enabled. Slowly closing in on widening being a viable legalization
strategy without it resorting to scalarization at every turn. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212614 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out my trick of using the same masks for SSE4.1 and AVX2 didn't work out
as we have to blend two vectors. While there remove unecessary cross-lane moves
from the shuffles so the backend can lower it to palignr instead of vperm.
Fixes PR20118, a miscompilation of vector sdiv by constant on AVX2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212611 91177308-0d34-0410-b5e6-96231b3b80d8
vector types to be legal and a ZERO_EXTEND node is encountered.
When we use widening to legalize vector types, extend nodes are a real
challenge. Either the input or output is likely to be legal, but in many
cases not both. As a consequence, we don't really have any way to
represent this situation and the prior code in the widening legalization
framework would just scalarize the extend operation completely.
This patch introduces a new DAG node to represent doing a zero extend of
a vector "in register". The core of the idea is to allow legal but
different vector types in the input and output. The output vector must
have fewer lanes but wider elements. The operation is defined to zero
extend the low elements of the input to the size of the output elements,
and drop all of the high elements which don't have a corresponding lane
in the output vector.
It also includes generic expansion of this node in terms of blending
a zero vector into the high elements of the vector and bitcasting
across. This in turn yields extremely nice code for x86 SSE2 when we use
the new widening legalization logic in conjunction with the new shuffle
lowering logic.
There is still more to do here. We need to support sign extension, any
extension, and potentially int-to-float conversions. My current plan is
to continue using similar synthetic nodes to model each of these
transitions with generic lowering code for each one.
However, with this patch LLVM already reaches performance parity with
GCC for the core C loops of the x264 code (assuming you disable the
hand-written assembly versions) when compiling for SSE2 and SSE3
architectures and enabling the new widening and lowering logic for
vectors.
Differential Revision: http://reviews.llvm.org/D4405
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212610 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This completes the change to use JALR instead of JR on MIPS32r6/MIPS64r6.
Reviewers: jkolek, vmedic, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4269
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212605 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
RET, and RET_MM have been replaced by a pseudo named PseudoReturn.
In addition a version with a 64-bit GPR named PseudoReturn64 has been
added.
Instruction selection for a return matches RetRA, which is expanded post
register allocation to PseudoReturn/PseudoReturn64. During MipsAsmPrinter,
this PseudoReturn/PseudoReturn64 are emitted as:
- (JALR64 $zero, $rs) on MIPS64r6
- (JALR $zero, $rs) on MIPS32r6
- (JR_MM $rs) on microMIPS
- (JR $rs) otherwise
On MIPS32r6/MIPS64r6, 'jr $rs' is an alias for 'jalr $zero, $rs'. To aid
development and review (specifically, to ensure all cases of jr are
updated), these aliases are temporarily named 'r6.jr' instead of 'jr'.
A follow up patch will change them back to the correct mnemonic.
Added (JALR $zero, $rs) to MipsNaClELFStreamer's definition of an indirect
jump, and removed it from its definition of a call.
Note: I haven't accounted for MIPS64 in MipsNaClELFStreamer since it's
doesn't appear to account for any MIPS64-specifics.
The return instruction created as part of eh_return expansion is now expanded
using expandRetRA() so we use the right return instruction on MIPS32r6/MIPS64r6
('jalr $zero, $rs').
Also, fixed a misuse of isABI_N64() to detect 64-bit wide registers in
expandEhReturn().
Reviewers: jkolek, vmedic, mseaborn, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212604 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch re-uses the implementation of 'llvm-mc -show-inst' and makes it
available to llc as 'llc -asm-show-inst'.
This is necessary to test parts of MIPS32r6/MIPS64r6 without resorting to
'llc -filetype=obj' tests. For example, on MIPS32r2 and earlier we use the
'jr $rs' instruction for indirect branches and returns. On MIPS32r6, we no
longer have 'jr $rs' and use 'jalr $zero, $rs' instead. The catch is that,
on MIPS32r6, 'jr $rs' is an alias for 'jalr $zero, $rs' and is the preferred
way of writing this instruction. As a result, all MIPS ISA's emit 'jr $rs' in
their assembly output and the assembler encodes this to different opcodes
according to the ISA.
Using this option, we can check that the MCInst really is a JR or a JALR by
matching the emitted comment. This removes the need for a 'llc -filetype=obj'
test.
Reviewers: rafael, dsanders
Reviewed By: dsanders
Subscribers: zoran.jovanovic, llvm-commits
Differential Revision: http://reviews.llvm.org/D4267
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212603 91177308-0d34-0410-b5e6-96231b3b80d8
has settled without incident, removing the x86-specific and overly
strict 'isVectorSplat' routine in favor of generic and more powerful
splat detection.
The primary motivation and result of this is that the x86 backend can
now see through splats which contain undef elements. This is essential
if we are using a widening form of legalization and I've updated a test
case to also run in that mode as before this change the generated code
for the test case was completely scalarized.
This version of the patch much more carefully handles the undef lanes.
- We aren't overly conservative about them in the shift lowering
(where we will never use the splat itself).
- One place where the splat would have been re-used by the existing code
now explicitly constructs a new constant splat that will be safe.
- The broadcast lowering is much more reasonable with undefs by doing
a correct check of whether the splat is the only user of a loaded
value, checking that the splat actually crosses multiple lanes before
using a broadcast, and handling broadcasts of non-constant splats.
As a consequence of the last bullet, the weird usage of vpshufd instead
of vbroadcast is gone, and we actually can lower an AVX splat with
vbroadcastss where before we emitted a really strange pattern of
a vector load and a manual splat across the vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212602 91177308-0d34-0410-b5e6-96231b3b80d8
This -f group flag appears to influence linker flags, breaking the usual rules
and causing CMake's link invocation to fail during feature detection due to
missing link dependencies (msan_*).
Let's forcibly add it for now to get things the way they were before feature
detection started working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212590 91177308-0d34-0410-b5e6-96231b3b80d8