function can support dynamic stack realignment. That's a much easier question
to answer at instruction selection stage than whether the function actually
will have dynamic alignment prologue. This allows the removal of the
stack alignment heuristic pass, and improves code quality for cases where
the heuristic would result in dynamic alignment code being generated when
it was not strictly necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93885 91177308-0d34-0410-b5e6-96231b3b80d8
For now, this pass is fairly conservative. It only perform the replacement when both the pre- and post- extension values are used in the block. It will miss cases where the post-extension values are live, but not used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93278 91177308-0d34-0410-b5e6-96231b3b80d8
instruction is copy like where the source and destination registers can
overlap. This is to be used by the coalescable to coalesce the source and
destination registers of instructions like X86::MOVSX64rr32. Apparently
some crazy people believe the coalescer is too simple.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93210 91177308-0d34-0410-b5e6-96231b3b80d8
new AsmPrinter. This is perhaps less elegant than describing them
in terms of MOV32r0 and subreg operations, but it allows the
current register to rematerialize them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93158 91177308-0d34-0410-b5e6-96231b3b80d8
be non-optimal. To be precise, we should avoid folding loads if the instructions
only update part of the destination register, and the non-updated part is not
needed. e.g. cvtss2sd, sqrtss. Unfolding the load from these instructions breaks
the partial register dependency and it can improve performance. e.g.
movss (%rdi), %xmm0
cvtss2sd %xmm0, %xmm0
instead of
cvtss2sd (%rdi), %xmm0
An alternative method to break dependency is to clear the register first. e.g.
xorps %xmm0, %xmm0
cvtss2sd (%rdi), %xmm0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91672 91177308-0d34-0410-b5e6-96231b3b80d8
Note that "hasDotLocAndDotFile"-style debug info was already broken;
people wanting this functionality should implement it in the
AsmPrinter/DwarfWriter code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89711 91177308-0d34-0410-b5e6-96231b3b80d8
- If destination is a physical register and it has a subreg index, use the
sub-register instead.
This fixes PR5423.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88745 91177308-0d34-0410-b5e6-96231b3b80d8
Provide special isLoadFromStackSlotPostFE and isStoreToStackSlotPostFE
interfaces to explicitly request checking for post-frame ptr elimination
operands. This uses a heuristic so it isn't reliable for correctness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87047 91177308-0d34-0410-b5e6-96231b3b80d8
machine instruction loads or stores from/to a stack slot. Unlike
isLoadFromStackSlot and isStoreFromStackSlot, the instruction may be
something other than a pure load/store (e.g. it may be an arithmetic
operation with a memory operand). This helps AsmPrinter determine when
to print a spill/reload comment.
This is only a hint since we may not be able to figure this out in all
cases. As such, it should not be relied upon for correctness.
Implement for X86. Return false by default for other architectures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87026 91177308-0d34-0410-b5e6-96231b3b80d8
This patch forbids implicit conversion of DenseMap::const_iterator to
DenseMap::iterator which was possible because DenseMapIterator inherited
(publicly) from DenseMapConstIterator. Conversion the other way around is now
allowed as one may expect.
The template DenseMapConstIterator is removed and the template parameter
IsConst which specifies whether the iterator is constant is added to
DenseMapIterator.
Actually IsConst parameter is not necessary since the constness can be
determined from KeyT but this is not relevant to the fix and can be addressed
later.
Patch by Victor Zverovich!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86636 91177308-0d34-0410-b5e6-96231b3b80d8
unfolding loads for hoisting. getOpcodeAfterMemoryUnfold returns the
opcode of the original operation without the load, not the load
itself, MachineLICM needs to know the operand index in order to get
the correct register class. Extend getOpcodeAfterMemoryUnfold to
return this information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85622 91177308-0d34-0410-b5e6-96231b3b80d8
(for uses marked kill and defs marked dead) a few instructions in
addition to forwards. Also, increase the maximum number of instructions
to scan, as it appears to help in a fair number of cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84061 91177308-0d34-0410-b5e6-96231b3b80d8
implementations with a new MachineInstr::isInvariantLoad, which uses
MachineMemOperands and is target-independent. This brings MachineLICM
and other functionality to targets which previously lacked an
isInvariantLoad implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83475 91177308-0d34-0410-b5e6-96231b3b80d8
unused DECLARE instruction.
KILL is not yet used anywhere, it will replace TargetInstrInfo::IMPLICIT_DEF
in the places where IMPLICIT_DEF is just used to alter liveness of physical
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83006 91177308-0d34-0410-b5e6-96231b3b80d8
- Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
This eliminates MachineInstr's std::list member and allows the data to be
created by isel and live for the remainder of codegen, avoiding a lot of
copying and unnecessary translation. This also shrinks MemSDNode.
- Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
fields for MachineMemOperands.
- Change MemSDNode to have a MachineMemOperand member instead of its own
fields with the same information. This introduces some redundancy, but
it's more consistent with what MachineInstr will eventually want.
- Ignore alignment when searching for redundant loads for CSE, but remember
the greatest alignment.
Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82794 91177308-0d34-0410-b5e6-96231b3b80d8
naming scheme used in SelectionDAG, where there are multiple kinds
of "target" nodes, but "machine" nodes are nodes which represent
a MachineInstr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82790 91177308-0d34-0410-b5e6-96231b3b80d8
safe. This can happen we a subreg_to_reg 0 has been coalesced. One
exception is when the instruction that folds the load is a move, then we
can simply turn it into a 32-bit load from the stack slot.
rdar://7170444
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81494 91177308-0d34-0410-b5e6-96231b3b80d8
MachineInstr and MachineOperand. This required eliminating a
bunch of stuff that was using DOUT, I hope that bill doesn't
mind me stealing his fun. ;-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79813 91177308-0d34-0410-b5e6-96231b3b80d8
bytes for F2 0F 38 and propagate. Add a FIXME for a set
of possibilities which correspond to intrinsics already used.
New test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78508 91177308-0d34-0410-b5e6-96231b3b80d8
the only real caller (GetFunctionSizeInBytes) uses it.
The custom ARM implementation of this is basically reimplementing
an assembler poorly for negligible gain. It should be removed
IMNSHO, but I'll leave that to ARMish folks to decide.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77877 91177308-0d34-0410-b5e6-96231b3b80d8
due to x86 encoding restrictions. This is currently off by default
because it may cause code quality regressions. This is for PR4572.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77565 91177308-0d34-0410-b5e6-96231b3b80d8
and convert code to using it, instead of having lots of things
poke the isLookupPtrRegClass() method directly.
2. Make PointerLikeRegClass contain a 'kind' int, and store it in
the existing regclass field of TargetOperandInfo when the
isLookupPtrRegClass() predicate is set. Make getRegClass pass
this into TargetRegisterInfo::getPointerRegClass(), allowing
targets to have multiple ptr_rc things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77504 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid remat'ing instructions whose def have sub-register indices for now. It's just really really hard to get all the cases right.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75900 91177308-0d34-0410-b5e6-96231b3b80d8
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75640 91177308-0d34-0410-b5e6-96231b3b80d8
This involves temporarily hard wiring some parts to use the global context. This isn't ideal, but it's
the only way I could figure out to make this process vaguely incremental.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75445 91177308-0d34-0410-b5e6-96231b3b80d8
Make llvm_unreachable take an optional string, thus moving the cerr<< out of
line.
LLVM_UNREACHABLE is now a simple wrapper that makes the message go away for
NDEBUG builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75379 91177308-0d34-0410-b5e6-96231b3b80d8
registers based on dynamic conditions. For example, X86 EBP/RBP, when used as
frame register has to be spilled in the first fixed object. It should inform
PEI this so it doesn't get allocated another stack object. Also, it should not
be spilled as other callee-saved registers but rather its spilling and restoring
are being handled by emitPrologue and emitEpilogue. Avoid spilling it twice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75116 91177308-0d34-0410-b5e6-96231b3b80d8
The register allocator, when it allocates a register to a virtual register defined by an implicit_def, can allocate any physical register without worrying about overlapping live ranges. It should mark all of operands of the said virtual register so later passes will do the right thing.
This is not the best solution. But it should be a lot less fragile to having the scavenger try to track what is defined by implicit_def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74518 91177308-0d34-0410-b5e6-96231b3b80d8
implementation primarily differs from the former in that the asmprinter
doesn't make a zillion decisions about whether or not something will be
RIP relative or not. Instead, those decisions are made by isel lowering
and propagated through to the asm printer. To achieve this, we:
1. Represent RIP relative addresses by setting the base of the X86 addr
mode to X86::RIP.
2. When ISel Lowering decides that it is safe to use RIP, it lowers to
X86ISD::WrapperRIP. When it is unsafe to use RIP, it lowers to
X86ISD::Wrapper as before.
3. This removes isRIPRel from X86ISelAddressMode, representing it with
a basereg of RIP instead.
4. The addressing mode matching logic in isel is greatly simplified.
5. The asmprinter is greatly simplified, notably the "NotRIPRel" predicate
passed through various printoperand routines is gone now.
6. The various symbol printing routines in asmprinter now no longer infer
when to emit (%rip), they just print the symbol.
I think this is a big improvement over the previous situation. It does have
two small caveats though: 1. I implemented a horrible "no-rip" modifier for
the inline asm "P" constraint modifier. This is a short term hack, there is
a much better, but more involved, solution. 2. I had to xfail an
-aggressive-remat testcase because it isn't handling the use of RIP in the
constant-pool reading instruction. This specific test is easy to fix without
-aggressive-remat, which I intend to do next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74372 91177308-0d34-0410-b5e6-96231b3b80d8
decoding. Essentially, they both map to the same column in the "opcode
extensions for one- and two-byte opcodes" table in the x86 manual. The RawFrm
complicates decoding this.
Instead, use opcode 0x01, prefix 0x01, and form MRM1r. Then have the code
emitter special case these, a la [SML]FENCE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72556 91177308-0d34-0410-b5e6-96231b3b80d8
booleans. This gives a better indication of what the "addReg()" is
doing. Remembering what all of those booleans mean isn't easy, especially if you
aren't spending all of your time in that code.
I took Jakob's suggestion and made it illegal to pass in "true" for the
flag. This should hopefully prevent any unintended misuse of this (by reverting
to the old way of using addReg()).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71722 91177308-0d34-0410-b5e6-96231b3b80d8
- Synchronize instruction length computation code in X86InstrInfo with code in X86CodeEmitter.cpp
Patch by Zoltan Varga.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70929 91177308-0d34-0410-b5e6-96231b3b80d8
to precisely describe the h-register subreg register classes.
Thanks to Jakob Stoklund Olesen for spotting this and for the
initial patch!
Also, make getStoreRegOpcode and getLoadRegOpcode aware of the
needs of h registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70211 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the extra copyRegToReg calls in ScheduleDAGSDNodesEmit.cpp
unnecessary. Derived from a patch by Jakob Stoklund Olesen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69635 91177308-0d34-0410-b5e6-96231b3b80d8
