is a no-op other than requiring some analysis results be available.
This can be used in real pass pipelines to force the usually lazy
analysis running to eagerly compute something at a specific point, and
it can be used to test the pass manager infrastructure (my primary use
at the moment).
I've also added bit of pipeline parsing magic to support generating
these directly from the opt command so that you can directly use these
when debugging your analysis. The syntax is:
require<analysis-name>
This can be used at any level of the pass manager. For example:
cgscc(function(require<my-analysis>,no-op-function))
This would produce a no-op function pass requiring my-analysis, followed
by a fully no-op function pass, both of these in a function pass manager
which is nested inside of a bottom-up CGSCC pass manager which is in the
top-level (implicit) module pass manager.
I have zero attachment to the particular syntax I'm using here. Consider
it a straw man for use while I'm testing and fleshing things out.
Suggestions for better syntax welcome, and I'll update everything based
on any consensus that develops.
I've used this new functionality to more directly test the analysis
printing rather than relying on the cgscc pass manager running an
analysis for me. This is still minimally tested because I need to have
analyses to run first! ;] That patch is next, but wanted to keep this
one separate for easier review and discussion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225236 91177308-0d34-0410-b5e6-96231b3b80d8
Now that `LLVMContextImpl` can call `MDNode::dropAllReferences()` to
prevent teardown madness, stop dropping uniquing just because an operand
drops to null.
Part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225223 91177308-0d34-0410-b5e6-96231b3b80d8
We no longer generate horrible code for the stated function:
void f(signed char *a, _Bool b, _Bool c) {
signed char t = 0;
if (b) t = *a;
if (c) *a = t;
}
for which we now generate:
.L.f:
andi. 5, 5, 1
cmpldi 1, 4, 0
li 5, 0
beq 1, .LBB0_2
lbz 5, 0(3)
.LBB0_2: # %if.end
bclr 4, 1, 0
stb 5, 0(3)
blr
so we don't need the README.txt entry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225217 91177308-0d34-0410-b5e6-96231b3b80d8
We now produce the desired code as noted in the README.txt file (no spurious
or). Remove the README entry and improve the regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225214 91177308-0d34-0410-b5e6-96231b3b80d8
We now produce the desired code as noted in the README.txt file. Remove the
README entry and add a regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225209 91177308-0d34-0410-b5e6-96231b3b80d8
dsymutil would like to use all the AsmPrinter/MCStreamer infrastructure
to stream out the DWARF. In order to do so, it will reuse the DIE object
and so this header needs to be public.
The interface exposed here has some corners that cannot be used without a
DwarfDebug object, but clients that want to stream Dwarf can just avoid
these.
Differential Revision: http://reviews.llvm.org/D6695
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225208 91177308-0d34-0410-b5e6-96231b3b80d8
This object is meant to own the ObjectFiles and their underlying
MemoryBuffer. It is basically the equivalent of an OwningBinary
except that it efficiently handles Archives. It is optimized for
efficiently providing mappings of members of the same archive when
they are opened successively (which is standard in Darwin debug
maps, objects from the same archive will be contiguous).
Of course, the BinaryHolder will also be used by the DWARF linker
once it is commited, but for now only the debug map parser uses it.
With this change, you can run llvm-dsymutil on your Darwin debug build
of clang and get a complete debug map for it.
Differential Revision: http://reviews.llvm.org/D6690
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225207 91177308-0d34-0410-b5e6-96231b3b80d8
We now produce the desired code as noted in the README.txt file. Remove the
README entry and add a regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225205 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this function from our README.txt file:
int foo(int a, int b) { return (a < b) << 4; }
We now explicitly track CR bits by default, so the comment in the README.txt
about not really having a SETCC is no longer accurate, but we did generate this
somewhat silly code:
cmpw 0, 3, 4
li 3, 0
li 12, 1
isel 3, 12, 3, 0
sldi 3, 3, 4
blr
which generates the zext as a select between 0 and 1, and then shifts the
result by a constant amount. Here we preprocess the DAG in order to fold the
results of operations on an extension of an i1 value into the SELECT_I[48]
pseudo instruction when the resulting constant can be materialized using one
instruction (just like the 0 and 1). This was not implemented as a DAGCombine
because the resulting code would have been anti-canonical and depends on
replacing chained user nodes, which does not fit well into the lowering
paradigm. Now we generate:
cmpw 0, 3, 4
li 3, 0
li 12, 16
isel 3, 12, 3, 0
blr
which is less silly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225203 91177308-0d34-0410-b5e6-96231b3b80d8
The 64-bit semantics of cntlzw are not special, the 32-bit population count is
stored as a 64-bit value in the range [0,32]. As a result, it is always zero
extended, and it can be added to the PPCISelDAGToDAG peephole optimization as a
frontier instruction for the removal of unnecessary zero extensions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225192 91177308-0d34-0410-b5e6-96231b3b80d8
lhbrx and lwbrx not only load their data with byte swapping, but also clear the
upper 32 bits (at least). As a result, they can be added to the PPCISelDAGToDAG
peephole optimization as frontier instructions for the removal of unnecessary
zero extensions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225189 91177308-0d34-0410-b5e6-96231b3b80d8
The swap implementation for iplist is currently unsupported. Simply splice the
old list into place, which achieves the same purpose. This is needed in order
to thread the -frewrite-map-file frontend option correctly. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225186 91177308-0d34-0410-b5e6-96231b3b80d8
We used to generate code similar to:
umov.b w8, v0[2]
strb w8, [x0, x1]
because the STR*ro* patterns were preferred to ST1*.
Instead, we can avoid going through GPRs, and generate:
add x8, x0, x1
st1.b { v0 }[2], [x8]
This patch increases the ST1* AddedComplexity to achieve that.
rdar://16372710
Differential Revision: http://reviews.llvm.org/D6202
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225183 91177308-0d34-0410-b5e6-96231b3b80d8
For 0-lane stores, we used to generate code similar to:
fmov w8, s0
str w8, [x0, x1, lsl #2]
instead of:
str s0, [x0, x1, lsl #2]
To correct that: for store lane 0 patterns, directly match to STR <subreg>0.
Byte-sized instructions don't have the special case for a 0 index,
because FPR8s are defined to have untyped content.
rdar://16372710
Differential Revision: http://reviews.llvm.org/D6772
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225181 91177308-0d34-0410-b5e6-96231b3b80d8
Tag_compatibility takes two arguments, but before this patch it would
erroneously accept just one, it now produces an error in that case.
Change-Id: I530f918587620d0d5dfebf639944d6083871ef7d
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225167 91177308-0d34-0410-b5e6-96231b3b80d8
Claim conformance to version 2.09 of the ARM ABI.
This build attribute must be emitted first amongst the build attributes when
written to an object file. This is to simplify conformance detection by
consumers.
Change-Id: If9eddcfc416bc9ad6e5cc8cdcb05d0031af7657e
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225166 91177308-0d34-0410-b5e6-96231b3b80d8
when all are being preserved.
We want to short-circuit this for a couple of reasons. One, I don't
really want passes to grow a dependency on actually receiving their
invalidate call when they've been preserved. I'm thinking about removing
this entirely. But more importantly, preserving everything is likely to
be the common case in a lot of scenarios, and it would be really good to
bypass all of the invalidation and preservation machinery there.
Avoiding calling N opaque functions to try to invalidate things that are
by definition still valid seems important. =]
This wasn't really inpsired by much other than seeing the spam in the
logging for analyses, but it seems better ot get it checked in rather
than forgetting about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225163 91177308-0d34-0410-b5e6-96231b3b80d8
manager.
This starts to allow us to test analyses more easily, but it's really
only the beginning. Some of the code here is still untestable without
manual changes to create analysis passes, but I wanted to factor it into
a small of chunks as possible.
Next up in order to be able to test things are, in no particular order:
- No-op analyses passes so we don't have to use real ones to exercise
the pass maneger itself.
- Automatic way of generating dummy passes that require an analysis be
run, including a variant that calls a 'print' method on a pass to make
it even easier to print out the results of an analysis.
- Dummy passes that invalidate all analyses for their IR unit so we can
test invalidation and re-runs.
- Automatic way to print each analysis pass as it is re-run.
- Automatic but optional verification of analysis passes everywhere
possible.
I'm not claiming I'll get to all of these immediately, but that's what
is in the pipeline at some stage. I'm fleshing out exactly what I need
and what to prioritize by working on converting analyses and then trying
to test the conversion. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225162 91177308-0d34-0410-b5e6-96231b3b80d8
{code}
// loop body
... = a[i] (1)
... = a[i+1] (2)
.......
a[i+1] = .... (3)
a[i] = ... (4)
{code}
The algorithm tries to collect memory access candidates from AliasSetTracker, and then check memory dependences one another. The memory accesses are unique in AliasSetTracker, and a single memory access in AliasSetTracker may map to multiple entries in AccessAnalysis, which could cover both 'read' and 'write'. Originally the algorithm only checked 'write' entry in Accesses if only 'write' exists. This is incorrect and the consequence is it ignored all read access, and finally some RAW and WAR dependence are missed.
For the case given above, if we ignore two reads, the dependence between (1) and (3) would not be able to be captured, and finally this loop will be incorrectly vectorized.
The fix simply inserts a new loop to find all entries in Accesses. Since it will skip most of all other memory accesses by checking the Value pointer at the very beginning of the loop, it should not increase compile-time visibly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225159 91177308-0d34-0410-b5e6-96231b3b80d8
