gcc-4.4 was optimizing away comparisons against SimpleValueType when
it was compared to a value larger than the largest value in the enum.
This patch works around it by adding one extra item to the enum so
that these tests will now be valid.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79401 91177308-0d34-0410-b5e6-96231b3b80d8
- Drop the Candidates argument and fix all callers. Now that RegScavenger
tracks available registers accurately, there is no need to restict the
search.
- Make sure that no aliases of the found register are in use. This was a potential bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79369 91177308-0d34-0410-b5e6-96231b3b80d8
MCAsmStreamer. Based on this, eliminate the current section from AsmPrinter.
While I'm at it, clean up the last of the horrible "switch to null section" stuff
and add an assert. This change is in preparation for completely eliminating
asmprinter::switchtosection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79324 91177308-0d34-0410-b5e6-96231b3b80d8
more properly belong. This allows removing the front-end conditionalized
SJLJ code, and cleans up the generated IR considerably. All of the
infrastructure code (calling _Unwind_SjLj_Register/Unregister, etc) is
added by the SjLjEHPrepare pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79250 91177308-0d34-0410-b5e6-96231b3b80d8
The register scavenger maintains a DistanceMap that maps MI pointers to their
distance from the top of the current MBB. The DistanceMap is built
incrementally in forward() and in bulk in findFirstUse(). It is used by
scavengeRegister() to determine which candidate register has the longest
unused interval.
Unfortunately the DistanceMap contents can become outdated. The first time
scavengeRegister() is called, the DistanceMap is filled to cover the MBB. If
then instructions are inserted in the MBB (as they always are following
scavengeRegister()), the recorded distances are too short. This causes bad
behaviour in the included test case where a register use /after/ the current
position is ignored because findFirstUse() thinks is is /before/ the current
position. A "using an undefined register" assertion follows promptly.
The fix is to build a fresh DistanceMap at the top of scavengeRegister(), and
discard it after use. This means that DistanceMap is no longer needed as a
RegScavenger member variable, and forward() doesn't need to update it.
The fix then discloses issue number two in the same test case: The candidate
search in scavengeRegister() finds a CSR that has been saved in the prologue,
but is currently unused. It would be both inefficient and wrong to spill such
a register in the emergency spill slot. In the present case, the emergency
slot restore is placed immediately before the normal epilogue restore, leading
to a "Redefining a live register" assertion.
Fix number two: When scavengerRegister() stumbles upon an unused register that
is overwritten later in the MBB, return that register early. It is important
to verify that the register is defined later in the MBB, otherwise it might be
an unspilled CSR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78650 91177308-0d34-0410-b5e6-96231b3b80d8
and short. Well, it's kinda short. Definitely nasty and brutish.
The front-end generates the register/unregister calls into the SjLj runtime,
call-site indices and landing pad dispatch. The back end fills in the LSDA
with the call-site information provided by the front end. Catch blocks are
not yet implemented.
Built on Darwin and verified no llvm-core "make check" regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78625 91177308-0d34-0410-b5e6-96231b3b80d8
This definitely slows down asm output so put it under an -asm-exuberant
flag.
This information is useful when doing static analysis of performance
issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78567 91177308-0d34-0410-b5e6-96231b3b80d8
Handle large integers, x86_fp80, ConstantAggregateZero, and two more ConstantExpr:
GetElementPtr and IntToPtr
Set SHF_MERGE bit for mergeable strings
Avoid zero initialized strings to be classified as a bss symbol
Don't allow common symbols to be classified as STB_WEAK
Add a constant to be used as a global value offset in data relocations
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78476 91177308-0d34-0410-b5e6-96231b3b80d8
Now there is no special treatment of instructions that redefine part of a
super-register. Instead, the super-register is marked with <imp-use,kill> and
<imp-def>. For instance, from LowerSubregs on ARM:
subreg: CONVERTING: %Q1<def> = INSERT_SUBREG %Q1<undef>, %D1<kill>, 5
subreg: %D2<def> = FCPYD %D1<kill>, 14, %reg0, %Q1<imp-def>
subreg: CONVERTING: %Q1<def> = INSERT_SUBREG %Q1, %D0<kill>, 6
subreg: %D3<def> = FCPYD %D0<kill>, 14, %reg0, %Q1<imp-use,kill>, %Q1<imp-def>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78466 91177308-0d34-0410-b5e6-96231b3b80d8
Verify that early clobber registers and their aliases are not used.
All changes to RegsAvailable are now done as a transaction so the order of
operands makes no difference.
The included test case is from PR4686. It has behaviour that was dependent on the order of operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78465 91177308-0d34-0410-b5e6-96231b3b80d8
- start support for new PEI w/reg alloc, allow running RS from emit{Pro,Epi}logue() target hooks.
- fix minor issue with recursion detection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78318 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of awkwardly encoding calling-convention information with ISD::CALL,
ISD::FORMAL_ARGUMENTS, ISD::RET, and ISD::ARG_FLAGS nodes, TargetLowering
provides three virtual functions for targets to override:
LowerFormalArguments, LowerCall, and LowerRet, which replace the custom
lowering done on the special nodes. They provide the same information, but
in a more immediately usable format.
This also reworks much of the target-independent tail call logic. The
decision of whether or not to perform a tail call is now cleanly split
between target-independent portions, and the target dependent portion
in IsEligibleForTailCallOptimization.
This also synchronizes all in-tree targets, to help enable future
refactoring and feature work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78142 91177308-0d34-0410-b5e6-96231b3b80d8
for ELF to work.
2) RIP addressing: Use SIB bytes for absolute relocations where RegBase=0,
IndexReg=0.
3) The JIT can get the real address of cstpools and jmptables during
code emission, fix that for object code emission
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78129 91177308-0d34-0410-b5e6-96231b3b80d8
Allow imp-def and imp-use of anything in the scavenger asserts, just like the machine code verifier.
Allow redefinition of a sub-register of a live register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77904 91177308-0d34-0410-b5e6-96231b3b80d8
padding is disabled, tabs get replaced by spaces except in the case of
the first operand, where the tab is output to line up the operands after
the mnemonics.
Add some better comments and eliminate redundant code.
Fix some testcases to not assume tabs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77740 91177308-0d34-0410-b5e6-96231b3b80d8
shouldn't do AU.setPreservesCFG(), because even though CodeGen passes
don't modify the LLVM IR CFG, they may modify the MachineFunction CFG,
and passes like MachineLoop are registered with isCFGOnly set to true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77691 91177308-0d34-0410-b5e6-96231b3b80d8
failures when building assorted projects with clang.
--- Reverse-merging r77654 into '.':
U include/llvm/CodeGen/Passes.h
U include/llvm/CodeGen/MachineFunctionPass.h
U include/llvm/CodeGen/MachineFunction.h
U include/llvm/CodeGen/LazyLiveness.h
U include/llvm/CodeGen/SelectionDAGISel.h
D include/llvm/CodeGen/MachineFunctionAnalysis.h
U include/llvm/Function.h
U lib/Target/CellSPU/SPUISelDAGToDAG.cpp
U lib/Target/PowerPC/PPCISelDAGToDAG.cpp
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/MachineVerifier.cpp
U lib/CodeGen/MachineFunction.cpp
U lib/CodeGen/PrologEpilogInserter.cpp
U lib/CodeGen/MachineLoopInfo.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
D lib/CodeGen/MachineFunctionAnalysis.cpp
D lib/CodeGen/MachineFunctionPass.cpp
U lib/CodeGen/LiveVariables.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77661 91177308-0d34-0410-b5e6-96231b3b80d8
This is currently used by X86 to handle atomic_load_add when the output of the node is not used. I believe there is a better solution. But I find MERGE_VALUES useful for selecting multi-output node when the dead output can be selected as a IMPLICIT_DEF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77583 91177308-0d34-0410-b5e6-96231b3b80d8
it is highly specific to the object file that will be generated in the end,
this introduces a new TargetLoweringObjectFile interface that is implemented
for each of ELF/MachO/COFF/Alpha/PIC16 and XCore.
Though still is still a brutal and ugly refactoring, this is a major step
towards goodness.
This patch also:
1. fixes a bunch of dangling pointer problems in the PIC16 backend.
2. disables the TargetLowering copy ctor which PIC16 was accidentally using.
3. gets us closer to xcore having its own crazy target section flags and
pic16 not having to shadow sections with its own objects.
4. fixes wierdness where ELF targets would set CStringSection but not
CStringSection_. Factor the code better.
5. fixes some bugs in string lowering on ELF targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77294 91177308-0d34-0410-b5e6-96231b3b80d8
pool entry will require relocations against it. I implemented this
conservatively for ARM, someone who is knowledgable about it should
see if this can be improved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76678 91177308-0d34-0410-b5e6-96231b3b80d8
starting in getCurrentFunctionEHName. Among other problems,
we would try to privative a "foo.eh" label, but end up emitting
the label as _Lfoo.eh instead of L_foo.eh on darwin. This is really
bad, and the linker has always tolerated these labels existing.
For now, just emit them as _foo.eh.
This patch also fixes problems with ".eh" labels on unnamed
functions and eliminates two strangely defined TargetAsmInfo
hooks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76231 91177308-0d34-0410-b5e6-96231b3b80d8
call to the MachineCodeEmitter interface and made copying the start
line of a function not conditional on whether we're emitting Dwarf
debug information. I'll propagate the processDebugLoc() calls to the
non-X86 targets in a followup patch.
In the long run, it'll probably be better to gather this information
through the DwarfWriter, but the DwarfWriter currently depends on the
AsmPrinter and TargetAsmInfo, and fixing that would be out of the way
for this patch.
There's a bug in OProfile 0.9.4 that makes it ignore line numbers for
addresses above 4G, and a patch fixing it at
http://thread.gmane.org/gmane.linux.oprofile/7634
Sample output:
$ sudo opcontrol --reset; sudo opcontrol --start-daemon; sudo opcontrol --start; `pwd`/Debug/bin/lli fib.bc; sudo opcontrol --stop
Signalling daemon... done
Profiler running.
fib(40) == 165580141
Stopping profiling.
$ opreport -g -d -l `pwd`/Debug/bin/lli|head -60
Overflow stats not available
CPU: Core 2, speed 1998 MHz (estimated)
Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit mask of 0x00 (Unhalted core cycles) count 100000
vma samples % linenr info image name symbol name
00007f67a30370b0 25489 61.2554 fib.c:24 10946.jo fib_left
00007f67a30370b0 1634 6.4106 fib.c:24
00007f67a30370b1 83 0.3256 fib.c:24
00007f67a30370b9 1997 7.8348 fib.c:24
00007f67a30370c6 2080 8.1604 fib.c:27
00007f67a30370c8 988 3.8762 fib.c:27
00007f67a30370cd 1315 5.1591 fib.c:27
00007f67a30370cf 251 0.9847 fib.c:27
00007f67a30370d3 1191 4.6726 fib.c:27
00007f67a30370d6 975 3.8252 fib.c:27
00007f67a30370db 1010 3.9625 fib.c:27
00007f67a30370dd 242 0.9494 fib.c:27
00007f67a30370e1 2782 10.9145 fib.c:28
00007f67a30370e5 3768 14.7828 fib.c:28
00007f67a30370eb 615 2.4128 (no location information)
00007f67a30370f3 6558 25.7287 (no location information)
00007f67a3037100 15603 37.4973 fib.c:29 10946.jo fib_right
00007f67a3037100 1646 10.5493 fib.c:29
00007f67a3037101 45 0.2884 fib.c:29
00007f67a3037109 2372 15.2022 fib.c:29
00007f67a3037116 2234 14.3178 fib.c:32
00007f67a3037118 612 3.9223 fib.c:32
00007f67a303711d 622 3.9864 fib.c:32
00007f67a303711f 385 2.4675 fib.c:32
00007f67a3037123 404 2.5892 fib.c:32
00007f67a3037126 634 4.0633 fib.c:32
00007f67a303712b 870 5.5759 fib.c:32
00007f67a303712d 62 0.3974 fib.c:32
00007f67a3037131 1848 11.8439 fib.c:33
00007f67a3037135 2840 18.2016 fib.c:33
00007f67a303713a 1 0.0064 fib.c:33
00007f67a303713b 1023 6.5564 (no location information)
00007f67a3037143 5 0.0320 (no location information)
000000000080c1e4 15 0.0360 MachineOperand.h:150 lli llvm::MachineOperand::isReg() const
000000000080c1e4 6 40.0000 MachineOperand.h:150
000000000080c1ec 2 13.3333 MachineOperand.h:150
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76102 91177308-0d34-0410-b5e6-96231b3b80d8
and related functions out of LoopBase and into Loop, since they
are specific to BasicBlock-based loops. This also allows the code
to be moved out-of-line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75523 91177308-0d34-0410-b5e6-96231b3b80d8
using the Curiously Recurring Template Pattern with LoopBase.
This will help further refactoring, and future functionality for
Loop. Also, Headers can now foward-declare Loop, instead of pulling
in LoopInfo.h or doing tricks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75519 91177308-0d34-0410-b5e6-96231b3b80d8
We'll eventually use this to print comments in asm files and do other
fun things.
This adds interfaces to the AsmPrinter and changes TableGen to invoke
the postInstructionAction when appropriate. It also add parameters to
TargetAsmInfo to control comment layout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75490 91177308-0d34-0410-b5e6-96231b3b80d8
This involves temporarily hard wiring some parts to use the global context. This isn't ideal, but it's
the only way I could figure out to make this process vaguely incremental.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75445 91177308-0d34-0410-b5e6-96231b3b80d8
hooks as they're no longer needed.
The major change with this patch is to make formatted_raw_ostream usable
by any client of raw_ostream.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75283 91177308-0d34-0410-b5e6-96231b3b80d8
value. Adjust other code to deal with that correctly. Make
DAGTypeLegalizer::PromoteIntRes_EXTRACT_VECTOR_ELT take advantage of
this new flexibility to simplify the code and make it deal with unusual
vectors (like <4 x i1>) correctly. Fixes PR3037.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75176 91177308-0d34-0410-b5e6-96231b3b80d8
as an (index,bool) pair. The bool flag records whether the kill is a
PHI kill or not. This code will be used to enable splitting of live
intervals containing PHI-kills.
A slight change to live interval weights introduced an extra spill
into lsr-code-insertion (outside the critical sections). The test
condition has been updated to reflect this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75097 91177308-0d34-0410-b5e6-96231b3b80d8
default, this option is not enabled to support clients who rely on
this behavior.
Fixes http://llvm.org/PR4483
A patch to allocate additional memory for globals after we run out is
forthcoming.
Patch by Reid Kleckner!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75059 91177308-0d34-0410-b5e6-96231b3b80d8
VSETCC must define all bits, which is different than it was documented
to before. Since all targets that implement VSETCC already have this
behavior, and we don't optimize based on this, just change the
documentation. We now get nice code for vec_compare.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74978 91177308-0d34-0410-b5e6-96231b3b80d8
uint8_t (via 'foo & 255'), i replaced this with an explicit (uint8_t)
cast which is equivalent, faster and more correct (silences
type-related warnings). Also, following coding standards I replaced
post-increment with pre-increment."
Patch by Ryan Flynn!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74929 91177308-0d34-0410-b5e6-96231b3b80d8
With the SVR4 ABI on PowerPC, vector arguments for vararg calls are passed differently depending on whether they are a fixed or a variable argument. Variable vector arguments always go into memory, fixed vector arguments are put
into vector registers. If there are no free vector registers available, fixed vector arguments are put on the stack.
The NumFixedArgs attribute allows to decide for an argument in a vararg call whether it belongs to the fixed or variable portion of the parameter list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74764 91177308-0d34-0410-b5e6-96231b3b80d8
Note, isUndef marker must be placed even on implicit_def def operand or else the scavenger will not ignore it. This is necessary because -O0 path does not use liveintervalanalysis, it treats implicit_def just like any other def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74601 91177308-0d34-0410-b5e6-96231b3b80d8
- This more or less amounts to a revert of r65379. I'm curious to know what
happened that caused this variable to become unused.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74579 91177308-0d34-0410-b5e6-96231b3b80d8
have the alignment be calculated up front, and have the back-ends obey whatever
alignment is decided upon.
This allows for future work that would allow for precise no-op placement and the
like.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74564 91177308-0d34-0410-b5e6-96231b3b80d8
The register allocator, when it allocates a register to a virtual register defined by an implicit_def, can allocate any physical register without worrying about overlapping live ranges. It should mark all of operands of the said virtual register so later passes will do the right thing.
This is not the best solution. But it should be a lot less fragile to having the scavenger try to track what is defined by implicit_def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74518 91177308-0d34-0410-b5e6-96231b3b80d8
the SelectionDAG::getGlobalAddress function properly looks through
aliases to determine thread-localness, but then passes the GV* down
to GlobalAddressSDNode::GlobalAddressSDNode which does not. Instead
of passing down isTarget, just pass down the predetermined node
opcode. This fixes some assertions with out of tree changes I'm
working on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74325 91177308-0d34-0410-b5e6-96231b3b80d8
The OpActions array had a limit of 32 value types, so change it to use
MVT::MAX_ALLOWED_VALUETYPE in its declaration and change the accesses to
this array to work with a VT.getSimpleVT() that is larger than 32.
Also, add a comment to the place where MVT::MAX_ALLOWED_VALUETYPE is
defined indicating that it must be a multiple of 32.
This is part of the work allow MVT::LAST_VALUETYPE be greater than 32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74130 91177308-0d34-0410-b5e6-96231b3b80d8
This change doubles the allowable value for MVT::LAST_VALUETYPE. It does
this by doing several things.
1. Introduces MVT::MAX_ALLOWED_LAST_VALUETYPE which in this change has a
value of 64. This value contains the current maximum for the
MVT::LAST_VALUETYPE.
2. Instead of checking "MVT::LAST_VALUETYPE <= 32", all of those uses
now become "MVT::LAST_VALUETYPE <= MVT::MAX_ALLOWED_LAST_VALUETYPE"
3. Changes the dimension of the ValueTypeActions from 2 elements to four
elements and adds comments ahead of the declaration indicating the it is
"(MVT::MAX_ALLOWED_LAST_VALUETYPE/32) * 2". This at least lets us find
what is affected if and when MVT::MAX_ALLOWED_LAST_VALUETYPE gets
changed.
4. Adds initializers for the new elements of ValueTypeActions.
This does NOT add any types in MVT. That would be done separately.
This doubles the size of ValueTypeActions from 64 bits to 128 bits and
gives us the freedom to add more types for AVX.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74110 91177308-0d34-0410-b5e6-96231b3b80d8
a bunch of code from all the targets, and eliminates nondeterministic
ordering of directives being emitted in the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74096 91177308-0d34-0410-b5e6-96231b3b80d8
Support for .text relocations, implementing TargetELFWriter overloaded methods for x86/x86_64.
Use a map to track global values to their symbol table indexes
Code cleanup and small fixes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73894 91177308-0d34-0410-b5e6-96231b3b80d8
- Change register allocation hint to a pair of unsigned integers. The hint type is zero (which means prefer the register specified as second part of the pair) or entirely target dependent.
- Allow targets to specify alternative register allocation orders based on allocation hint.
Part 2.
- Use the register allocation hint system to implement more aggressive load / store multiple formation.
- Aggressively form LDRD / STRD. These are formed *before* register allocation. It has to be done this way to shorten live interval of base and offset registers. e.g.
v1025 = LDR v1024, 0
v1026 = LDR v1024, 0
=>
v1025,v1026 = LDRD v1024, 0
If this transformation isn't done before allocation, v1024 will overlap v1025 which means it more difficult to allocate a register pair.
- Even with the register allocation hint, it may not be possible to get the desired allocation. In that case, the post-allocation load / store multiple pass must fix the ldrd / strd instructions. They can either become ldm / stm instructions or back to a pair of ldr / str instructions.
This is work in progress, not yet enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73381 91177308-0d34-0410-b5e6-96231b3b80d8
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72707 91177308-0d34-0410-b5e6-96231b3b80d8
entries as there are basic blocks in the function. LiveVariables::getVarInfo
creates a VarInfo struct for every register in the function, leading to
quadratic space use. This patch changes the BitVector to a SparseBitVector,
which doesn't help the worst-case memory use but does reduce the actual use in
very long functions with short-lived variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72426 91177308-0d34-0410-b5e6-96231b3b80d8
will allow simplifying LegalizeDAG to eliminate type legalization. (I
have a patch to do that, but it's not quite finished; I'll commit it
once it's finished and I've fixed any review comments for this patch.)
See the comment at the beginning of
lib/CodeGen/SelectionDAG/LegalizeVectorOps.cpp for more details on the
motivation for this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72325 91177308-0d34-0410-b5e6-96231b3b80d8
code in preparation for code generation. The main thing it does
is handle the case when eh.exception calls (and, in a future
patch, eh.selector calls) are far away from landing pads. Right
now in practice you only find eh.exception calls close to landing
pads: either in a landing pad (the common case) or in a landing
pad successor, due to loop passes shifting them about. However
future exception handling improvements will result in calls far
from landing pads:
(1) Inlining of rewinds. Consider the following case:
In function @f:
...
invoke @g to label %normal unwind label %unwinds
...
unwinds:
%ex = call i8* @llvm.eh.exception()
...
In function @g:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
"rethrow exception"
Now inline @g into @f. Currently this is turned into:
In function @f:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
invoke "rethrow exception" to label %normal unwind label %unwinds
unwinds:
%ex = call i8* @llvm.eh.exception()
...
However we would like to simplify invoke of "rethrow exception" into
a branch to the %unwinds label. Then %unwinds is no longer a landing
pad, and the eh.exception call there is then far away from any landing
pads.
(2) Using the unwind instruction for cleanups.
It would be nice to have codegen handle the following case:
invoke @something to label %continue unwind label %run_cleanups
...
handler:
... perform cleanups ...
unwind
This requires turning "unwind" into a library call, which
necessarily takes a pointer to the exception as an argument
(this patch also does this unwind lowering). But that means
you are using eh.exception again far from a landing pad.
(3) Bugpoint simplifications. When bugpoint is simplifying
exception handling code it often generates eh.exception calls
far from a landing pad, which then causes codegen to assert.
Bugpoint then latches on to this assertion and loses sight
of the original problem.
Note that it is currently rare for this pass to actually do
anything. And in fact it normally shouldn't do anything at
all given the code coming out of llvm-gcc! But it does fire
a few times in the testsuite. As far as I can see this is
almost always due to the LoopStrengthReduce codegen pass
introducing pointless loop preheader blocks which are landing
pads and only contain a branch to another block. This other
block contains an eh.exception call. So probably by tweaking
LoopStrengthReduce a bit this can be avoided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72276 91177308-0d34-0410-b5e6-96231b3b80d8
The following is checked:
* Operand counts: All explicit operands must be present.
* Register classes: All physical and virtual register operands must be
compatible with the register class required by the instruction descriptor.
* Register live intervals: Registers must be defined only once, and must be
defined before use.
The machine code verifier is enabled with the command-line option
'-verify-machineinstrs', or by defining the environment variable
LLVM_VERIFY_MACHINEINSTRS to the name of a file that will receive all the
verifier errors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71918 91177308-0d34-0410-b5e6-96231b3b80d8
of exception handling builtin sjlj targets in functions turns out not to
be necessary. Marking the intrinsic implementation in the .td file as
defining all registers is sufficient to get the context saved properly by
the containing function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71743 91177308-0d34-0410-b5e6-96231b3b80d8
booleans. This gives a better indication of what the "addReg()" is
doing. Remembering what all of those booleans mean isn't easy, especially if you
aren't spending all of your time in that code.
I took Jakob's suggestion and made it illegal to pass in "true" for the
flag. This should hopefully prevent any unintended misuse of this (by reverting
to the old way of using addReg()).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71722 91177308-0d34-0410-b5e6-96231b3b80d8
a supporting preliminary patch for GCC-compatible SjLJ exception handling. Note that these intrinsics are not designed to be invoked directly by the user, but
rather used by the front-end as target hooks for exception handling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71610 91177308-0d34-0410-b5e6-96231b3b80d8
checking for bcopy... no
checking for getc_unlocked... Assertion failed: (0 && "Unknown SCEV kind!"), function operator(), file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/Analysis/ScalarEvolution.cpp, line 511.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/libdecnumber/decUtility.c:360: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
make[4]: *** [decUtility.o] Error 1
make[4]: *** Waiting for unfinished jobs....
Assertion failed: (0 && "Unknown SCEV kind!"), function operator(), file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/Analysis/ScalarEvolution.cpp, line 511.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/libdecnumber/decNumber.c:5591: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
make[4]: *** [decNumber.o] Error 1
make[3]: *** [all-stage2-libdecnumber] Error 2
make[3]: *** Waiting for unfinished jobs....
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71165 91177308-0d34-0410-b5e6-96231b3b80d8
shows up in -print-machineinstrs. This doesn't appear to affect anything, but it was
weird for some DBG_LABELs to have DebugLocs but not all of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70921 91177308-0d34-0410-b5e6-96231b3b80d8