into a roundss intrinsic, producing a cyclic dag. The root cause
of this is badness handling ComplexPattern nodes in the old dagisel
that I noticed through inspection. Eliminate a copy of the of the
code that handled ComplexPatterns by making EmitChildMatchCode call
into EmitMatchCode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96408 91177308-0d34-0410-b5e6-96231b3b80d8
use and only call IsProfitableToFold/IsLegalToFold on the load
being folded, like the old dagiselemitter does. This
substantially simplifies the code and improves opportunities for
sharing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96368 91177308-0d34-0410-b5e6-96231b3b80d8
with chains. On interior nodes that lead up to them, we just directly
check that there is a single use. This generates slightly more
efficient code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96366 91177308-0d34-0410-b5e6-96231b3b80d8
IsLegalToFold and IsProfitableToFold. The generic version of the later simply checks whether the folding candidate has a single use.
This allows the target isel routines more flexibility in deciding whether folding makes sense. The specific case we are interested in is folding constant pool loads with multiple uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96255 91177308-0d34-0410-b5e6-96231b3b80d8
produce a table based matcher instead of gobs of C++ Code.
Though it's not done yet, the shrinkage seems promising,
the table for the X86 ISel is 75K and still has a lot of
optimization to come (compare to the ~1.5M of .o generated
the old way, much of which will go away).
The code is currently disabled by default (the #if 0 in
DAGISelEmitter.cpp). When enabled it generates a dead
SelectCode2 function in the DAGISel Header which will
eventually replace SelectCode.
There is still a lot of stuff left to do, which are
documented with a trail of FIXMEs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96215 91177308-0d34-0410-b5e6-96231b3b80d8
that predated -fast-isel which attempted to speed up the dag pattern
matchers at -O0. Since fast-isel is around, this is basically
obsolete and removing it shrinks the generated dag isels.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96188 91177308-0d34-0410-b5e6-96231b3b80d8
whose opcodes extend into the ModR/M field using the
Form field of the instruction rather than by special
casing each instruction. Commented out the special
casing of VMCALL, which is the first instruction to use
this special form. While I was in the neighborhood,
added a few comments for people modifying the Intel
disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96043 91177308-0d34-0410-b5e6-96231b3b80d8
matcher is now free of implicit operands!
- Still need to clean up the code now that we don't to worry about implicit
operands, and to make it a hard error if an instruction fails to specify all
of its operands for some reason.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95956 91177308-0d34-0410-b5e6-96231b3b80d8
operand into the CodeGenInstruction's list of operands,
which is useful for EDEmitter. (Still working on PR6219)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95759 91177308-0d34-0410-b5e6-96231b3b80d8
for representing constraint info semantically instead of
as a c expression that will be blatted out to the .inc
file. Fix X86RecognizableInstr to use this instead of
parsing C code :).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95753 91177308-0d34-0410-b5e6-96231b3b80d8
implementation. Also changed the constructor
so that it does not require a Record, making it
usable by the EDEmitter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95715 91177308-0d34-0410-b5e6-96231b3b80d8
out of the AsmWriterEmitter. This patch does the physical
code movement, but leaves the implementation unchanged. I'll
make any changes necessary to generalize the code in a
separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95697 91177308-0d34-0410-b5e6-96231b3b80d8
into TargetOpcodes.h. #include the new TargetOpcodes.h
into MachineInstr. Add new inline accessors (like isPHI())
to MachineInstr, and start using them throughout the
codebase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95687 91177308-0d34-0410-b5e6-96231b3b80d8
than DEBUG_VALUE :( ) into the target indep AsmPrinter.cpp
file. This allows elimination of the
NO_ASM_WRITER_BOILERPLATE hack among other things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95177 91177308-0d34-0410-b5e6-96231b3b80d8
is still deterministic even amongst ambiguous instructions (eventually ambiguous
match orders will be a hard error, but we aren't there yet).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95157 91177308-0d34-0410-b5e6-96231b3b80d8
be static. Also made it possible for clients to get it
and no other functions from ...GenAsmMatcher.inc by
defining REGISTERS_ONLY before including GenAsmMatcher.inc.
This sets the stage for target-specific lexers that can
identify registers and return AsmToken::Register as
appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94266 91177308-0d34-0410-b5e6-96231b3b80d8
the new ParseInstruction method just parses and returns a list of
target operands. A new MatchInstruction interface is used to
turn the operand list into an MCInst.
This requires new/deleting all the operands, but it also gives
targets the ability to use polymorphic operands if they want to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93469 91177308-0d34-0410-b5e6-96231b3b80d8
- getToken is modeled after StringRef::split but it can split on multiple
separator chars and skips leading seperators.
- SplitString is a StringRef::split variant for more than 2 elements with the
same behaviour as getToken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93161 91177308-0d34-0410-b5e6-96231b3b80d8
memcpy, memset and other intrinsics that only access their arguments
to be readnone if the intrinsic's arguments all point to local memory.
This improves the testcase in the README to readonly, but it could in
theory be made readnone, however this would involve more sophisticated
analysis that looks through the memcpy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92829 91177308-0d34-0410-b5e6-96231b3b80d8
clear what information these functions are actually using.
This is also a micro-optimization, as passing a SDNode * around is
simpler than passing a { SDNode *, int } by value or reference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92564 91177308-0d34-0410-b5e6-96231b3b80d8
Made LEA memory operands emit only 4 MCInst operands.
Made the scale operand equal 1 for instructions that have no
SIB byte.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91919 91177308-0d34-0410-b5e6-96231b3b80d8
incarnations), integrated into the MC framework.
The disassembler is table-driven, using a custom TableGen backend to
generate hierarchical tables optimized for fast decode. The disassembler
consumes MemoryObjects and produces arrays of MCInsts, adhering to the
abstract base class MCDisassembler (llvm/MC/MCDisassembler.h).
The disassembler is documented in detail in
- lib/Target/X86/Disassembler/X86Disassembler.cpp (disassembler runtime)
- utils/TableGen/DisassemblerEmitter.cpp (table emitter)
You can test the disassembler by running llvm-mc -disassemble for i386
or x86_64 targets. Please let me know if you encounter any problems
with it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91749 91177308-0d34-0410-b5e6-96231b3b80d8
Checks that the code generated by 'tblgen --emit-llvmc' can be actually
compiled. Also fixes two bugs found in this way:
- forward_transformed_value didn't work with non-list arguments
- cl::ZeroOrOne is now called cl::Optional
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91404 91177308-0d34-0410-b5e6-96231b3b80d8
Note that "hasDotLocAndDotFile"-style debug info was already broken;
people wanting this functionality should implement it in the
AsmPrinter/DwarfWriter code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89711 91177308-0d34-0410-b5e6-96231b3b80d8
values, resolving references to them, and then removing the definitions.
If a template argument is set to an undefined value, we need to resolve
references to that argument to an explicit undefined value. The current code
leaves the reference to the template argument as it is, which causes an
assertion failure later when the definition of the template argument is
removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89581 91177308-0d34-0410-b5e6-96231b3b80d8
bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85517 91177308-0d34-0410-b5e6-96231b3b80d8
I was trying to check the WIP file to some local repository, but ended up
checking in the llvm repository. Oops!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85470 91177308-0d34-0410-b5e6-96231b3b80d8
set, these flags indicate the instructions source / def operands have special
register allocation requirement that are not captured in their register classes.
Post-allocation passes (e.g. post-alloc scheduler) should not change their
allocations. e.g. ARM::LDRD require the two definitions to be allocated
even / odd register pair.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83196 91177308-0d34-0410-b5e6-96231b3b80d8
unused DECLARE instruction.
KILL is not yet used anywhere, it will replace TargetInstrInfo::IMPLICIT_DEF
in the places where IMPLICIT_DEF is just used to alter liveness of physical
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83006 91177308-0d34-0410-b5e6-96231b3b80d8
- Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
This eliminates MachineInstr's std::list member and allows the data to be
created by isel and live for the remainder of codegen, avoiding a lot of
copying and unnecessary translation. This also shrinks MemSDNode.
- Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
fields for MachineMemOperands.
- Change MemSDNode to have a MachineMemOperand member instead of its own
fields with the same information. This introduces some redundancy, but
it's more consistent with what MachineInstr will eventually want.
- Ignore alignment when searching for redundant loads for CSE, but remember
the greatest alignment.
Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82794 91177308-0d34-0410-b5e6-96231b3b80d8
naming scheme used in SelectionDAG, where there are multiple kinds
of "target" nodes, but "machine" nodes are nodes which represent
a MachineInstr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82790 91177308-0d34-0410-b5e6-96231b3b80d8
the MCInst path of the asmprinter. Instead, pull comment printing
out of the autogenerated asmprinter into each target that uses the
autogenerated asmprinter. This causes code duplication into each
target, but in a way that will be easier to clean up later when more
asmprinter stuff is commonized into the base AsmPrinter class.
This also fixes an xcore strangeness where it inserted two tabs
before every instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81396 91177308-0d34-0410-b5e6-96231b3b80d8
a return in one case. Instead of sprinking return handling code
throughout the asmprinter generator, just treat it like any other
normal statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81395 91177308-0d34-0410-b5e6-96231b3b80d8
asm printer into the "printInstruction" routine. This
fixes a problem where the experimental asmprinter would
drop debug labels in some cases, and fixes issues on ppc/xcore
where pseudo instructions like "mr" didn't get debug locs properly.
It is annoying that this moves the call from one place into each
target, but a future set of more invasive refactorings will fix
that problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81377 91177308-0d34-0410-b5e6-96231b3b80d8
inferencing. As far as I can tell, these are equivalent to the existing
MVT::fAny, iAny and vAny types, and having both of them makes it harder
to reason about and modify the type inferencing code.
The specific problem in PR4795 occurs when updating a vAny type to be fAny
or iAny, or vice versa. Both iAny and fAny include vector types -- they
intersect with the set of types represented by vAny. When merging them,
choose fAny/iAny to represent the intersection. This is not perfect, since
fAny/iAny also include scalar types, but it is good enough for TableGen's
type inferencing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80423 91177308-0d34-0410-b5e6-96231b3b80d8
This is conventional command-line tool behavior. -f now just means
"enable binary output on terminals".
Add a -f option to llvm-extract and llvm-link, for consistency.
Remove F_Force from raw_fd_ostream and enable overwriting and
truncating by default. Introduce an F_Excl flag to permit users to
enable a failure when the file already exists. This flag is
currently unused.
Update Makefiles and documentation accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79990 91177308-0d34-0410-b5e6-96231b3b80d8
member out of line. ftostr is not particularly speedy,
so that method is presumably not perf sensitive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79885 91177308-0d34-0410-b5e6-96231b3b80d8
forcing them down into various .cpp files.
This change also:
1. Renames TimeValue::toString() and Path::toString() to ::str()
for similarity with the STL.
2. Removes all stream insertion support for sys::Path, forcing
clients to call .str().
3. Removes a use of Config/alloca.h from bugpoint, using smallvector
instead.
4. Weans llvm-db off <iostream>
sys::Path really needs to be gutted, but I don't have the desire to
do it at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79869 91177308-0d34-0410-b5e6-96231b3b80d8
- This manifested as non-determinism in the .inc output in rare cases (when two
distinct patterns ended up being equivalent, which is rather rare). That
meant the pattern matching was non-deterministic, which could eventually mean
the code generator selected different instructions based on the arch.
- It's probably worth making the DAGISel ensure a total ordering (or force the
user to), but the simple fix here is to totally order the Record* maps based
on a unique ID.
- PR4672, PR4711.
Yay:
--
ddunbar@giles:~$ cat ~/llvm.obj.64/lib/Target/*/*.inc | shasum
d1099ff34b21459a5a3e7021c225c080e6017ece -
ddunbar@giles:~$ cat ~/llvm.obj.ppc/lib/Target/*/*.inc | shasum
d1099ff34b21459a5a3e7021c225c080e6017ece -
--
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79846 91177308-0d34-0410-b5e6-96231b3b80d8
instead of as two bools. Use this to add a F_Append flag
which has the obvious behavior.
Other unrelated changes conflated into this patch:
1. REmove EH stuff from llvm-dis and llvm-as, the try blocks
are dead.
2. Simplify the filename inference code in llvm-as/llvm-dis,
because raw_fd_ostream does the right thing with '-'.
3. Switch machine verifier to use raw_ostream instead of ostream
(Which is the thing that needed append in the first place).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79807 91177308-0d34-0410-b5e6-96231b3b80d8
There have been a few times where I've wanted this but ended up leaving the
operand type unconstrained. It is easy to add this now and should help
catch errors in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78849 91177308-0d34-0410-b5e6-96231b3b80d8
- Used to mark fake instructions which don't correspond to an actual machine
instruction (or are duplicates of a real instruction). This is to be used for
"special cases" in the .td files, which should be ignored by things like the
assembler and disassembler. We still need a good solution to handle pervasive
duplication, like with the Int_ instructions.
- Set the bit on fake "mov 0" style instructions, which allows turning an
assembler matcher warning into a hard error.
- -2 FIXMEs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78731 91177308-0d34-0410-b5e6-96231b3b80d8
make it easier to see interesting ambiguities.
- Also, check that user doesn't try to redefine the super class. This is a wart
in the current design, in that assembler match classes aren't explicitly
declared somewhere (so there isn't a unique place to declare the super
class). This should probably be fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78532 91177308-0d34-0410-b5e6-96231b3b80d8
- We want the ordering operation to be simple, since we run it on every
match. The old ordering is also not a strict weak ordering when there are
ambiguities, which makes MSVC unhappy.
- While we are at it, detect all ambiguities instead of just the adjacent
ones. There are actually 655, for X86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78526 91177308-0d34-0410-b5e6-96231b3b80d8
- Track whether we need to insert an explicit 'break'.
- Invert conditional when matching a single prefix to reduce
nesting/bracing/breaking.
- wc -l of X86GenAsmMatcher.inc decreased by 10%. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78513 91177308-0d34-0410-b5e6-96231b3b80d8
