delete the instruction pointed to by CGP's current instruction
iterator, leading to a crash on the testcase. This fixes PR9578.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129200 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombiner created illegal BUILD_VECTOR operations.
The patch added a check that either illegal operations are
allowed or that the created operation is legal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125435 91177308-0d34-0410-b5e6-96231b3b80d8
In the bottom-up selection DAG scheduling, handle two-address
instructions that read/write unspillable registers. Treat
the entire chain of two-address nodes as a single live range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122472 91177308-0d34-0410-b5e6-96231b3b80d8
sequence of loads and stores was being generated to perform the
copy on the x86 targets if the parameter was less than 4 byte
aligned, causing llc to use up vast amounts of memory and time.
Use a "rep movs" form instead. PR7170.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118260 91177308-0d34-0410-b5e6-96231b3b80d8
expansion is the same as that used by LegalizeDAG.
The resulting code sucks in terms of performance/codesize on x86-32 for a
64-bit operation; I haven't looked into whether different expansions might be
better in general.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105378 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r99400 into '.':
D test/CodeGen/Generic/2010-03-24-liveintervalleak.ll
U lib/CodeGen/LiveIntervalAnalysis.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99419 91177308-0d34-0410-b5e6-96231b3b80d8
otherwise the SmallVector it contains doesn't free its memory.
In most cases LiveIntervalAnalysis could get away by not calling the destructor,
because VNInfos are bumpptr-allocated, and smallvectors usually don't grow.
However when the SmallVector does grow it always leaks.
This is the valgrind shown leak from the original testcase:
==8206== 18,304 bytes in 151 blocks are definitely lost in loss record 164 of 164
==8206== at 0x4A079C7: operator new(unsigned long) (vg_replace_malloc.c:220)
==8206== by 0x4DB7A7E: llvm::SmallVectorBase::grow_pod(unsigned long, unsigned long) (in /home/edwin/clam/git/builds/defaul
t/libclamav/.libs/libclamav.so.6.1.0)
==8206== by 0x4F90382: llvm::VNInfo::addKill(llvm::SlotIndex) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libcl
amav.so.6.1.0)
==8206== by 0x5126B5C: llvm::LiveIntervals::handleVirtualRegisterDef(llvm::MachineBasicBlock*, llvm::ilist_iterator<llvm::M
achineInstr>, llvm::SlotIndex, llvm::MachineOperand&, unsigned int, llvm::LiveInterval&) (in /home/edwin/clam/git/builds/defau
lt/libclamav/.libs/libclamav.so.6.1.0)
==8206== by 0x512725E: llvm::LiveIntervals::handleRegisterDef(llvm::MachineBasicBlock*, llvm::ilist_iterator<llvm::MachineI
nstr>, llvm::SlotIndex, llvm::MachineOperand&, unsigned int) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav
.so.6.1.0)
==8206== by 0x51278A8: llvm::LiveIntervals::computeIntervals() (in /home/edwin/clam/git/builds/default/libclamav/.libs/libc
lamav.so.6.1.0)
==8206== by 0x5127CB4: llvm::LiveIntervals::runOnMachineFunction(llvm::MachineFunction&) (in /home/edwin/clam/git/builds/de
fault/libclamav/.libs/libclamav.so.6.1.0)
==8206== by 0x4DAE935: llvm::FPPassManager::runOnFunction(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclama
v/.libs/libclamav.so.6.1.0)
==8206== by 0x4DAEB10: llvm::FunctionPassManagerImpl::run(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclama
v/.libs/libclamav.so.6.1.0)
==8206== by 0x4DAED3D: llvm::FunctionPassManager::run(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclamav/.l
ibs/libclamav.so.6.1.0)
==8206== by 0x4D8BE8E: llvm::JIT::runJITOnFunctionUnlocked(llvm::Function*, llvm::MutexGuard const&) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav.so.6.1.0)
==8206== by 0x4D8CA72: llvm::JIT::getPointerToFunction(llvm::Function*) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav.so.6.1.0)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99400 91177308-0d34-0410-b5e6-96231b3b80d8
to LLVM IR changes with addr label weirdness. In the testcase, we
generate references to the two bb's when codegen'ing the first
function:
_test1: ## @test1
leaq Ltmp0(%rip), %rax
..
leaq Ltmp1(%rip), %rax
Then continue to codegen the second function where the blocks
get merged. We're now smart enough to emit both labels, producing
this code:
_test_fun: ## @test_fun
## BB#0: ## %entry
Ltmp1: ## Block address taken
Ltmp0:
## BB#1: ## %ret
movl $-1, %eax
ret
Rejoice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98595 91177308-0d34-0410-b5e6-96231b3b80d8
label is generated, but then the block is deleted. Since the
value is undefined, we just emit the label right after the entry
label of the function. It might matter that the label is in the
same section as the function was afterall.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98579 91177308-0d34-0410-b5e6-96231b3b80d8
the problem only shows for msp430 and pic16 which is why it specifies
them using -march. But it is wrong to put such tests in CodeGen/Generic,
since not everyone builds these targets. Put a copy of the test in each
of the target test directories.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90005 91177308-0d34-0410-b5e6-96231b3b80d8
which was an expensive checks failure due to a bug in the checking. This
patch in essence reverts the original fix for PR3393, and refixes it by a
tweak to the way expensive checking is done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89454 91177308-0d34-0410-b5e6-96231b3b80d8
to break up CFG diamonds by banishing one of the blocks to the end of
the function, which is bad for code density and branch size.
This does pessimize MultiSource/Benchmarks/Ptrdist/yacr2, the
benchmark cited as the reason for the change, however I've examined
the code and it looks more like a case of gaming a particular
branch than of being generally applicable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84803 91177308-0d34-0410-b5e6-96231b3b80d8
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81537 91177308-0d34-0410-b5e6-96231b3b80d8
all Darwin targets; could be split into separate tests for
the chip subdirectories, but from Chris' last mail on testing
I assume he'd rather have only one test. Generic seems to be
the best available, maybe there should be a Darwin subdirectory?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79877 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
code in preparation for code generation. The main thing it does
is handle the case when eh.exception calls (and, in a future
patch, eh.selector calls) are far away from landing pads. Right
now in practice you only find eh.exception calls close to landing
pads: either in a landing pad (the common case) or in a landing
pad successor, due to loop passes shifting them about. However
future exception handling improvements will result in calls far
from landing pads:
(1) Inlining of rewinds. Consider the following case:
In function @f:
...
invoke @g to label %normal unwind label %unwinds
...
unwinds:
%ex = call i8* @llvm.eh.exception()
...
In function @g:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
"rethrow exception"
Now inline @g into @f. Currently this is turned into:
In function @f:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
invoke "rethrow exception" to label %normal unwind label %unwinds
unwinds:
%ex = call i8* @llvm.eh.exception()
...
However we would like to simplify invoke of "rethrow exception" into
a branch to the %unwinds label. Then %unwinds is no longer a landing
pad, and the eh.exception call there is then far away from any landing
pads.
(2) Using the unwind instruction for cleanups.
It would be nice to have codegen handle the following case:
invoke @something to label %continue unwind label %run_cleanups
...
handler:
... perform cleanups ...
unwind
This requires turning "unwind" into a library call, which
necessarily takes a pointer to the exception as an argument
(this patch also does this unwind lowering). But that means
you are using eh.exception again far from a landing pad.
(3) Bugpoint simplifications. When bugpoint is simplifying
exception handling code it often generates eh.exception calls
far from a landing pad, which then causes codegen to assert.
Bugpoint then latches on to this assertion and loses sight
of the original problem.
Note that it is currently rare for this pass to actually do
anything. And in fact it normally shouldn't do anything at
all given the code coming out of llvm-gcc! But it does fire
a few times in the testsuite. As far as I can see this is
almost always due to the LoopStrengthReduce codegen pass
introducing pointless loop preheader blocks which are landing
pads and only contain a branch to another block. This other
block contains an eh.exception call. So probably by tweaking
LoopStrengthReduce a bit this can be avoided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72276 91177308-0d34-0410-b5e6-96231b3b80d8
When a test fails with more than a pipeful of output on stdout AND stderr, one
of the DejaGnu programs blocks. The problem can be avoided by redirecting
stdout to a file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71919 91177308-0d34-0410-b5e6-96231b3b80d8
anything larger than 64-bits, avoiding a crash. This should
really be fixed to use APInts, though type legalization happens
to help us out and we get good code on the attached testcase at
least.
This fixes rdar://6836460
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70360 91177308-0d34-0410-b5e6-96231b3b80d8
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70343 91177308-0d34-0410-b5e6-96231b3b80d8
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70270 91177308-0d34-0410-b5e6-96231b3b80d8
PR2957
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70225 91177308-0d34-0410-b5e6-96231b3b80d8
This particular one is undefined behavior (although this
isn't related to the crash), so it will no longer do it
at compile time, which seems better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69990 91177308-0d34-0410-b5e6-96231b3b80d8
to support C99 inline, GNU extern inline, etc. Related bugzilla's
include PR3517, PR3100, & PR2933. Nothing uses this yet, but it
appears to work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68940 91177308-0d34-0410-b5e6-96231b3b80d8
1. Sinking would crash when the first instruction of a block was
sunk due to iterator problems.
2. Instructions could be sunk to their current block, causing an
infinite loop.
This fixes PR3968
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68787 91177308-0d34-0410-b5e6-96231b3b80d8
it is not APInt clean, but even when it is it needs to be evaluated carefully
to determine whether it is actually profitable.
This fixes a crash on PR3806
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67134 91177308-0d34-0410-b5e6-96231b3b80d8
this test into FrontendC to ensure that llvm-gcc
is available; assemble using "llvm-gcc -xassembler"
rather than "as".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62683 91177308-0d34-0410-b5e6-96231b3b80d8
scheduling dependencies. Add assertion checks to help catch
this.
It appears the Mips target defaults to list-td, and it has a
regression test that uses a physreg dependence. Such code was
liable to be miscompiled, and now evokes an assertion failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62177 91177308-0d34-0410-b5e6-96231b3b80d8
aggregate types. Don't increment the current index after reaching
the end of a struct, as it will already be pointing at
one-past-the end. This fixes PR3288.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61828 91177308-0d34-0410-b5e6-96231b3b80d8
for promoted integer types, eg: i16 on ppc-32, or
i24 on any platform. Complete support for arbitrary
precision integers would require handling expanded
integer types, eg: i128, but I couldn't be bothered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60834 91177308-0d34-0410-b5e6-96231b3b80d8
problems for example when LLVM is built with --with-extra-options=-m64
and as defaults to x86-32 mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59640 91177308-0d34-0410-b5e6-96231b3b80d8
to be marked invalid regardless of whether it is
a debug, an exception handling or (hopefully) a
GC label.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54172 91177308-0d34-0410-b5e6-96231b3b80d8
of all sizes from i1 to i256. The code is not
always that great, for example (x86)
movw %di, %ax
movw %ax, i17_s
where the store could be directly from %di.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53677 91177308-0d34-0410-b5e6-96231b3b80d8
sizes from i1 to i256. The generated code is
like one huge bug report of things that the DAG
combiner fails to simplify!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53676 91177308-0d34-0410-b5e6-96231b3b80d8
variable expansions involving the $ character.
This fixes 4 tests that were not running properly before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52183 91177308-0d34-0410-b5e6-96231b3b80d8
don't fail when (expected) error output is produced. This fixes 17 tests.
While I was there, I also made all RUN lines of the form "not llvm-as..." a bit
more consistent, they now all redirect stderr and stdout to /dev/null and use
input redirect to read their input.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52174 91177308-0d34-0410-b5e6-96231b3b80d8
to the block that defines their operands. This doesn't work in the
case that the operand is an invoke, because invoke is a terminator
and must be the last instruction in a block.
Replace it with support in SelectionDAGISel for copying struct values
into sequences of virtual registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50279 91177308-0d34-0410-b5e6-96231b3b80d8
the automated CallingConv code to handle return values typically
don't support multiple return values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48265 91177308-0d34-0410-b5e6-96231b3b80d8
after legalize. Just because a constant is legal (e.g. 0.0 in SSE)
doesn't mean that its negated value is legal (-0.0). We could make
this stronger by checking to see if the negated constant is actually
legal post negation, but it doesn't seem like a big deal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47591 91177308-0d34-0410-b5e6-96231b3b80d8
CTTZ and CTPOP. The expansion code differs from
that in LegalizeDAG in that it chooses to take the
CTLZ/CTTZ count from the Hi/Lo part depending on
whether the Hi/Lo value is zero, not on whether
CTLZ/CTTZ of Hi/Lo returned 32 (or whatever the
width of the type is) for it. I made this change
because the optimizers may well know that Hi/Lo
is zero and exploit it. The promotion code for
CTTZ also differs from that in LegalizeDAG: it
uses an "or" to get the right result when the
original value is zero, rather than using a compare
and select. This also means the value doesn't
need to be zero extended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47075 91177308-0d34-0410-b5e6-96231b3b80d8
any bugs in the future since to get the crash you also
need hacked in fake libcall support (which creates odd
but legal trees), but since adding it doesn't hurt...
Thanks to Chris for this ultimately reduced version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46706 91177308-0d34-0410-b5e6-96231b3b80d8
delete a node even if it was not dead in some cases. Instead, just add it to
the worklist. Also, make sure to use the CombineTo methods, as it was doing
things that were unsafe: the top level combine loop could touch dangling memory.
This fixes CodeGen/Generic/2008-01-25-dag-combine-mul.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46384 91177308-0d34-0410-b5e6-96231b3b80d8
providing a misleading facility. It's used once in the MIPS backend
and hardcoded as "\t.globl\t" everywhere else.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45676 91177308-0d34-0410-b5e6-96231b3b80d8
values, which means doing extra legalization work.
It would be easier to get this kind of thing right if
there was some documentation...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45472 91177308-0d34-0410-b5e6-96231b3b80d8
define void @f() {
...
call i32 @g()
...
}
define void @g() {
...
}
The hazards are:
- @f and @g have GC, but they differ GC. Inlining is invalid. This
may never occur.
- @f has no GC, but @g does. g's GC must be propagated to @f.
The other scenarios are safe:
- @f and @g have the same GC.
- @f and @g have no GC.
- @g has no GC.
This patch adds inliner checks for the former two scenarios.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45351 91177308-0d34-0410-b5e6-96231b3b80d8
function with GC.
This will catch the error when the inliner inlines a function with
GC into a caller with no GC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45350 91177308-0d34-0410-b5e6-96231b3b80d8
how to lower them (with no attempt made to be
efficient, since they should only occur for
unoptimized code).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45108 91177308-0d34-0410-b5e6-96231b3b80d8
methods are new to Function:
bool hasCollector() const;
const std::string &getCollector() const;
void setCollector(const std::string &);
void clearCollector();
The assembly representation is as such:
define void @f() gc "shadow-stack" { ...
The implementation uses an on-the-side table to map Functions to
collector names, such that there is no overhead. A StringPool is
further used to unique collector names, which are extremely
likely to be unique per process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44769 91177308-0d34-0410-b5e6-96231b3b80d8
node A gets back into the DAG again because it was hiding in
one of the node maps: make sure that node replacement happens
in those maps too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44263 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM now enforces the following prototypes for the write barriers:
<ty>* @llvm.gcread(<ty2>*, <ty>**)
void @llvm.gcwrite(<ty>*, <ty2>*, <ty>**)
And for @llvm.gcroot, the first stack slot is verified to be an alloca or a
bitcast of an alloca.
Fixes test/CodeGen/Generic/GC/lower_gcroot.ll, which violated these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42051 91177308-0d34-0410-b5e6-96231b3b80d8
latest EH changes, and in any case it is hard to
imagine how the original bug could be reintroduced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41497 91177308-0d34-0410-b5e6-96231b3b80d8
This also changes the syntax for llvm.bswap, llvm.part.set, llvm.part.select, and llvm.ct* intrinsics. They are automatically upgraded by both the LLVM ASM reader and the bitcode reader. The test cases have been updated, with special tests added to ensure the automatic upgrading is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40807 91177308-0d34-0410-b5e6-96231b3b80d8
mnemonics from their operands instead of single spaces. This makes the
assembly output a little more consistent with various other compilers
(f.e. GCC), and slightly easier to read. Also, update the regression
tests accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40648 91177308-0d34-0410-b5e6-96231b3b80d8
Move tests that have C/C++ sources into the appropriate directory. This
allows them to be selected for testing based on whether llvm-gcc is
present or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39963 91177308-0d34-0410-b5e6-96231b3b80d8
Rearrange some tests so that if PowerPC is not being built we don't try to
run PowerPC specific tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36587 91177308-0d34-0410-b5e6-96231b3b80d8
