Low order register of a double word register operand. Operands
are defined by the name of the variable they are marked with in
the inline assembler code. This is a way to specify that the
operand just refers to the low order register for that variable.
It is the opposite of modifier 'D' which specifies the high order
register.
Example:
main()
{
long long ll_input = 0x1111222233334444LL;
long long ll_val = 3;
int i_result = 0;
__asm__ __volatile__(
"or %0, %L1, %2"
: "=r" (i_result)
: "r" (ll_input), "r" (ll_val));
}
Which results in:
lui $2, %hi(_gp_disp)
addiu $2, $2, %lo(_gp_disp)
addiu $sp, $sp, -8
addu $2, $2, $25
sw $2, 0($sp)
lui $2, 13107
ori $3, $2, 17476 <-- Low 32 bits of ll_input
lui $2, 4369
ori $4, $2, 8738 <-- High 32 bits of ll_input
addiu $5, $zero, 3 <-- Low 32 bits of ll_val
addiu $2, $zero, 0 <-- High 32 bits of ll_val
#APP
or $3, $4, $5 <-- or i_result, high 32 ll_input, low 32 of ll_val
#NO_APP
addiu $sp, $sp, 8
jr $ra
If not direction is done for the long long for 32 bit variables results
in using the low 32 bits as ll_val shows.
There is an existing bug if 'L' or 'D' is used for the destination register
for 32 bit long longs in that the target value will be updated incorrectly
for the non-specified part unless explicitly set within the inline asm code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160028 91177308-0d34-0410-b5e6-96231b3b80d8
generalizing its implementation sufficiently to support this value
number scenario as well.
This cuts out another significant performance hit in large functions
(over 10k basic blocks, etc), especially those with "natural" CFG
structures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160026 91177308-0d34-0410-b5e6-96231b3b80d8
This ordering allows nested if-conversion without using a work list, and
it makes it possible to update the dominator tree on the fly as well.
Any erased basic blocks will always be dominated by the current
post-order position, so the domtree can be pruned without invalidating
the iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160025 91177308-0d34-0410-b5e6-96231b3b80d8
X86MachineFunctionInfo as this is currently only used by X86. If this ever
becomes an issue on another arch (e.g., ARM) then we can hoist it back out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160009 91177308-0d34-0410-b5e6-96231b3b80d8
X86. Basically, this is a reapplication of r158087 with a few fixes.
Specifically, (1) the stack pointer is restored from the base pointer before
popping callee-saved registers and (2) in obscure cases (see comments in patch)
we must cache the value of the original stack adjustment in the prologue and
apply it in the epilogue.
rdar://11496434
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160002 91177308-0d34-0410-b5e6-96231b3b80d8
back of it.
I don't have anything even remotely close to a test case for this. It
only broke two build bots, both of them doing bootstrap builds, one of
them a dragonegg bootstrap. It doesn't break for me when I bootstrap
either. It doesn't reproduce every time or on many machines during the
bootstrap. Many thanks to Duncan Sands who got the exact command (and
stage of the bootstrap) which failed on the dragonegg bootstrap and
managed to get it to trigger under valgrind with debug symbols. The fix
was then found by inspection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159993 91177308-0d34-0410-b5e6-96231b3b80d8
multiple scalars and insert them into a vector. Next, we shuffle the elements
into the correct places, as before.
Also fix a small dagcombine bug in SimplifyBinOpWithSameOpcodeHands, when the
migration of bitcasts happened too late in the SelectionDAG process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159991 91177308-0d34-0410-b5e6-96231b3b80d8
quadratic behavior when performing pathological merges. Fixes the core
element of PR12652.
There is only one user of addRangeFrom left: join. I'm hoping to
refactor further in a future patch and have join use this merge
operation as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159982 91177308-0d34-0410-b5e6-96231b3b80d8
of the trick merge routines. This adds a layer of testing that was
necessary when implementing more efficient (and complex) merge logic for
this datastructure.
No functionality changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159981 91177308-0d34-0410-b5e6-96231b3b80d8
Some NEON instructions want to match against normal SDNodes for some
operand types and Intrinsics for others. For example, CTLZ. To enable this,
switch from explicitly requiring Intrinsic on the class templates to using
SDPatternOperator instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159974 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, this would become an integer extension operation, followed by a real integer->float conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159957 91177308-0d34-0410-b5e6-96231b3b80d8
getCondFromSETOpc, getCondFromCMovOpc, getSETFromCond, getCMovFromCond
No functional change intended.
If we want to update the condition code of CMOV|SET|Jcc, we first analyze the
opcode to get the condition code, then update the condition code, finally
synthesize the new opcode form the new condition code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159955 91177308-0d34-0410-b5e6-96231b3b80d8
Access mips register classes via MCRegisterInfo's functions instead of via the
TargetRegisterClasses defined in MipsGenRegisterInfo.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159953 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes ~70 lines in InstCombineLoadStoreAlloca.cpp and makes both functions a bit more aggressive than before :)
In theory, we can be more aggressive when removing an alloca than a malloc, because an alloca pointer should never escape, but we are not taking advantage of this anyway
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159952 91177308-0d34-0410-b5e6-96231b3b80d8
subtarget CPU descriptions and support new features of
MachineScheduler.
MachineModel has three categories of data:
1) Basic properties for coarse grained instruction cost model.
2) Scheduler Read/Write resources for simple per-opcode and operand cost model (TBD).
3) Instruction itineraties for detailed per-cycle reservation tables.
These will all live side-by-side. Any subtarget can use any
combination of them. Instruction itineraries will not change in the
near term. In the long run, I expect them to only be relevant for
in-order VLIW machines that have complex contraints and require a
precise scheduling/bundling model. Once itineraries are only actively
used by VLIW-ish targets, they could be replaced by something more
appropriate for those targets.
This tablegen backend rewrite sets things up for introducing
MachineModel type #2: per opcode/operand cost model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159891 91177308-0d34-0410-b5e6-96231b3b80d8
It is safe if EFLAGS is killed or re-defined.
When we are done with the basic block, check whether EFLAGS is live-out.
Do not optimize away cmp if EFLAGS is live-out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159888 91177308-0d34-0410-b5e6-96231b3b80d8
This means we can do cheap DSE for heap memory.
Nothing is done if the pointer excapes or has a load.
The churn in the tests is mostly due to objectsize, since we want to make sure we
don't delete the malloc call before evaluating the objectsize (otherwise it becomes -1/0)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159876 91177308-0d34-0410-b5e6-96231b3b80d8
For each Cmp, we check whether there is an earlier Sub which make Cmp
redundant. We handle the case where SUB operates on the same source operands as
Cmp, including the case where the two source operands are swapped.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159838 91177308-0d34-0410-b5e6-96231b3b80d8
DwarfDebug class could generate the same (inlined) DIVariable twice:
1) when trying to find abstract debug variable for a concrete inlined instance.
2) when explicitly collecting info for variables that were optimized out.
This change makes sure that this duplication won't happen and makes
Clang pass "gdb.opt/inline-locals" test from gdb testsuite.
Reviewed by Eric Christopher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159811 91177308-0d34-0410-b5e6-96231b3b80d8
Print the second half of a double word operand.
The include list was cleaned up a bit as well.
Also the test case was modified to test for both
big and little patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159787 91177308-0d34-0410-b5e6-96231b3b80d8
hash_value overload for MachineOperands. This addresses a FIXME
sufficient for me to remove it, and cleans up the code nicely too.
The important changes to the hashing logic:
- TargetFlags are now included in all of the hashes. These were complete
missed.
- Register operands have their subregisters and whether they are a def
included in the hash.
- We now actually hash all of the operand types. Previously, many
operand types were simply *dropped on the floor*. For example:
- Floating point immediates
- Large integer immediates (>64-bit)
- External globals!
- Register masks
- Metadata operands
- It removes the offset from the block-address hash; I'm a bit
suspicious of this, but isIdenticalTo doesn't consider the offset for
black addresses.
Any patterns involving these entities could have triggered extreme
slowdowns in MachineCSE or PHIElimination. Let me know if there are PRs
you think might be closed now... I'm looking myself, but I may miss
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159743 91177308-0d34-0410-b5e6-96231b3b80d8
broken. This patch fixes the superficial problems which lead to the
intractably slow compile times reported in PR13225.
The specific issue is that we were failing to include the *offset* of
a global variable in the hash code. Oops. This would in turn cause all
MIs which were only distinguishable due to operating on different
offsets of a global variable to produce identical hash functions. In
some of the test cases attached to the PR I saw hash table activity
where there were O(1000) probes-per-lookup *on average*. A very few
entries were responsible for most of these probes.
There is still quite a bit more to do here. The ad-hoc layering of data
in MachineOperands makes them *extremely* brittle to hash correctly.
We're missing quite a few other cases, the only ones I've fixed here are
the specific MO types which were allowed through the assert() in
getOffset().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159741 91177308-0d34-0410-b5e6-96231b3b80d8
change.
Move the "Not profitable, avoid CSE!" debug message next to where we fail the
check for profitability and use a different message for avoiding CSE due to
being in different register classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159729 91177308-0d34-0410-b5e6-96231b3b80d8
Function argument and return value registers aren't part of the
encoding, so they should be implicit operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159728 91177308-0d34-0410-b5e6-96231b3b80d8
Also allow trailing register mask operands on non-variadic both
MachineSDNodes and MachineInstrs.
The extra physreg RegisterSDNode operands are added to the MI as
<imp-use> operands. This makes it possible to have non-variadic call
instructions.
Call and return instructions really are non-variadic, the argument
registers should only be used implicitly - they are not part of the
encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159727 91177308-0d34-0410-b5e6-96231b3b80d8
The CopyToReg nodes that set up the argument registers before a call
must be glued to the call instruction. Otherwise, the scheduler may emit
the physreg copies long before the call, causing long live ranges for
the fixed registers.
Besides disabling good register allocation, that can also expose
problems when EmitInstrWithCustomInserter() splits a basic block during
the live range of a physreg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159721 91177308-0d34-0410-b5e6-96231b3b80d8
IntegersSubsetMapping
- Replaced type of Items field from std::list with std::map. In neares future I'll test it with DenseMap and do the correspond replacement
if possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159703 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the TII hooks needed by EarlyIfConversion to create cmov
instructions and estimate their latency.
Early if-conversion is still not enabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159695 91177308-0d34-0410-b5e6-96231b3b80d8
This pass performs if-conversion on SSA form machine code by
speculatively executing both sides of the branch and using a cmov
instruction to select the result. This can help lower the number of
branch mispredictions on architectures like x86 that don't have
predicable instructions.
The current implementation is very aggressive, and causes regressions on
mosts tests. It needs good heuristics that have yet to be implemented.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159694 91177308-0d34-0410-b5e6-96231b3b80d8
IntegersSubsetMapping
- Replaced type of Items field from std::list with std::map. In neares future I'll test it with DenseMap and do the correspond replacement
if possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159659 91177308-0d34-0410-b5e6-96231b3b80d8
inlineasm-cnstrnt-bad-r-1.ll is NOT supposed to fail, so it was removed. This resulted in the removal of a negative test (inlineasm-cnstrnt-bad-r-1.ll)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159625 91177308-0d34-0410-b5e6-96231b3b80d8
It appears to have caught a use-after-free introduced as by r159567
and/or friends which call 'addPass' from many more places. The bug in
'addPass' doesn't appear to be new, and was spotted by inspection when
ASan shown a bright light of a stacktrace at these functions.
Hopefully this will fix the ASan failure -- I have no test case other
than running an ASan-built clang over the test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159614 91177308-0d34-0410-b5e6-96231b3b80d8
inlineasm-cnstrnt-bad-r-1.ll is NOT supposed to fail, so it was removed. This resulted in the removal of a negative test (inlineasm-cnstrnt-bad-r-1.ll)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159610 91177308-0d34-0410-b5e6-96231b3b80d8
This is still a work in progress but I believe it is currently good enough
to fix PR13122 "Need unit test driver for codegen IR passes". For example,
you can run llc with -stop-after=loop-reduce to have it dump out the IR after
running LSR. Serializing machine-level IR is not yet supported but we have
some patches in progress for that.
The plan is to serialize the IR to a YAML file, containing separate sections
for the LLVM IR, machine-level IR, and whatever other info is needed. Chad
suggested that we stash the stop-after pass in the YAML file and use that
instead of the start-after option to figure out where to restart the
compilation. I think that's a great idea, but since it's not implemented yet
I put the -start-after option into this patch for testing purposes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159570 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it possible to just use a zero value to represent "no pass", so
the phony NoPassID global variable is no longer needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159568 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary step toward having TargetPassConfig be able to
start and stop the compilation at specified passes for unit testing
and debugging. No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159567 91177308-0d34-0410-b5e6-96231b3b80d8
My last checkin was apparently not the branch I intended. It was missing one change (added by chandlerc), and contained a spurious change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159548 91177308-0d34-0410-b5e6-96231b3b80d8
