The coalescer is supposed to clean these up, but when setting up parameters
for a function call, there may be copies to physregs. If the defining
instruction has been LICM'ed far away, the coalescer won't touch it.
The register allocation hint does not always work - when the register
allocator is backtracking, it clears the hints.
This patch is more conservative than r90502, and does not break
483.xalancbmk/i686. It still breaks the PowerPC bootstrap, so it is disabled
by default, and can be enabled with the -trivial-coalesce-ends option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91049 91177308-0d34-0410-b5e6-96231b3b80d8
When a call is placed to spill an interval this spiller will first try to
break the interval up into its component values. Single value intervals and
intervals which have already been split (or are the result of previous splits)
are spilled by the default spiller.
Splitting intervals as described above may improve the performance of generated
code in some circumstances. This work is experimental however, and it still
miscompiles many benchmarks. It's not recommended for general use yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90951 91177308-0d34-0410-b5e6-96231b3b80d8
The coalescer is supposed to clean these up, but when setting up parameters
for a function call, there may be copies to physregs. If the defining
instruction has been LICM'ed far away, the coalescer won't touch it.
The register allocation hint does not always work - when the register
allocator is backtracking, it clears the hints.
This patch takes care of a few more cases that r90163 missed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90502 91177308-0d34-0410-b5e6-96231b3b80d8
Add a -linearscan-skip-count argument (default to 0) that tells the
allocator to remember the last N registers it allocated and skip them
when looking for a register candidate. This tends to spread out
register usage and free up post-allocation scheduling at the cost of
slightly more register pressure. The primary benefit is the ability
to backschedule reloads.
This is turned off by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89356 91177308-0d34-0410-b5e6-96231b3b80d8
All spiller calls in RegAllocLinearScan now go through the new Spiller interface.
The "-new-spill-framework" command line option has been removed. To use the trivial in-place spiller you should now pass "-spiller=trivial -rewriter=trivial".
(Note the trivial spiller/rewriter are only meant to serve as examples of the new in-place modification work. Enabling them will yield terrible, though hopefully functional, code).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89311 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces a new pass, SlotIndexes, which is responsible for numbering
instructions for register allocation (and other clients). SlotIndexes numbering
is designed to match the existing scheme, so this patch should not cause any
changes in the generated code.
For consistency, and to avoid naming confusion, LiveIndex has been renamed
SlotIndex.
The processImplicitDefs method of the LiveIntervals analysis has been moved
into its own pass so that it can be run prior to SlotIndexes. This was
necessary to match the existing numbering scheme.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85979 91177308-0d34-0410-b5e6-96231b3b80d8
Chris claims we should never have visibility_hidden inside any .cpp file but
that's still not true even after this commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85042 91177308-0d34-0410-b5e6-96231b3b80d8
a new class, MachineInstrIndex, which hides arithmetic details from
most clients. This is a step towards allowing the register allocator
to update/insert code during allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81040 91177308-0d34-0410-b5e6-96231b3b80d8
- Some clients which used DOUT have moved to DEBUG. We are deprecating the
"magic" DOUT behavior which avoided calling printing functions when the
statement was disabled. In addition to being unnecessary magic, it had the
downside of leaving code in -Asserts builds, and of hiding potentially
unnecessary computations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77019 91177308-0d34-0410-b5e6-96231b3b80d8
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75640 91177308-0d34-0410-b5e6-96231b3b80d8
The register allocator, when it allocates a register to a virtual register defined by an implicit_def, can allocate any physical register without worrying about overlapping live ranges. It should mark all of operands of the said virtual register so later passes will do the right thing.
This is not the best solution. But it should be a lot less fragile to having the scavenger try to track what is defined by implicit_def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74518 91177308-0d34-0410-b5e6-96231b3b80d8
- Register allocator should resolve the second part of the hint (register number) before passing it to the target since it knows virtual register to physical register mapping.
- More fixes to get ARM load / store double word working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73671 91177308-0d34-0410-b5e6-96231b3b80d8
- Change register allocation hint to a pair of unsigned integers. The hint type is zero (which means prefer the register specified as second part of the pair) or entirely target dependent.
- Allow targets to specify alternative register allocation orders based on allocation hint.
Part 2.
- Use the register allocation hint system to implement more aggressive load / store multiple formation.
- Aggressively form LDRD / STRD. These are formed *before* register allocation. It has to be done this way to shorten live interval of base and offset registers. e.g.
v1025 = LDR v1024, 0
v1026 = LDR v1024, 0
=>
v1025,v1026 = LDRD v1024, 0
If this transformation isn't done before allocation, v1024 will overlap v1025 which means it more difficult to allocate a register pair.
- Even with the register allocation hint, it may not be possible to get the desired allocation. In that case, the post-allocation load / store multiple pass must fix the ldrd / strd instructions. They can either become ldm / stm instructions or back to a pair of ldr / str instructions.
This is work in progress, not yet enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73381 91177308-0d34-0410-b5e6-96231b3b80d8
VirtRegMap keeps track of allocations so it knows what's not used. As a horrible hack, the stack coloring can color spill slots with *free* registers. That is, it replace reload and spills with copies from and to the free register. It unfold instructions that load and store the spill slot and replace them with register using variants.
Not yet enabled. This is part 1. More coming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70787 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a very subtle bug. vr defined by an implicit_def is allowed overlap with any register since it doesn't actually modify anything. However, if it's used as a two-address use, its live range can be extended and it can be spilled. The spiller must take care not to emit a reload for the vn number that's defined by the implicit_def. This is both a correctness and performance issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69743 91177308-0d34-0410-b5e6-96231b3b80d8
%reg1498<def> = MOV32rm %reg1024, 1, %reg0, 12, %reg0, Mem:LD(4,4) [sunkaddr39 + 0]
%reg1506<def> = MOV32rm %reg1024, 1, %reg0, 8, %reg0, Mem:LD(4,4) [sunkaddr42 + 0]
%reg1486<def> = MOV32rr %reg1506
%reg1486<def> = XOR32rr %reg1486, %reg1498, %EFLAGS<imp-def,dead>
%reg1510<def> = MOV32rm %reg1024, 1, %reg0, 4, %reg0, Mem:LD(4,4) [sunkaddr45 + 0]
=>
%reg1498<def> = MOV32rm %reg2036, 1, %reg0, 12, %reg0, Mem:LD(4,4) [sunkaddr39 + 0]
%reg1506<def> = MOV32rm %reg2037, 1, %reg0, 8, %reg0, Mem:LD(4,4) [sunkaddr42 + 0]
%reg1486<def> = MOV32rr %reg1506
%reg1486<def> = XOR32rr %reg1486, %reg1498, %EFLAGS<imp-def,dead>
%reg1510<def> = MOV32rm %reg2038, 1, %reg0, 4, %reg0, Mem:LD(4,4) [sunkaddr45 + 0]
From linearscan's point of view, each of reg2036, 2037, and 2038 are separate registers, each is "killed" after a single use. The reloaded register is available and it's often clobbered right away. e.g. In thise case reg1498 is allocated EAX while reg2036 is allocated RAX. This means we end up with multiple reloads from the same stack slot in the same basic block.
Now linearscan recognize there are other reloads from same SS in the same BB. So it'll "downgrade" RAX (and its aliases) after reg2036 is allocated until the next reload (reg2037) is done. This greatly increase the likihood reloads from SS are reused.
This speeds up sha1 from OpenSSL by 5.8%. It is also an across the board win for SPEC2000 and 2006.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69585 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. allocating for GR32, bh is not used, updating bl spill weight.
bl should get the same spill weight otherwise it will be choosen
as a spill candidate since spilling bh doesn't make ebx available.
This fix PR2866.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67574 91177308-0d34-0410-b5e6-96231b3b80d8
